Admin network channel setup

I have some multihome machines running managed servers and want to partition the
admin traffic on each machine to a specific interface. I have set up an admin
network channel but how to I tell the Admin server to now use this interface instead
of the domain wide administration port?

Is this request for Windows Phone?
Count me in for a WP version of the very useful Connectivity Analyzer app for Symbian by Nokia.

Similar Messages

Network Folder Setup - "No Write Permission". Windows Vista.

Product: 8600 N911g
I am having issues in creating a network folder to scan to my computer. It responds ‘No write permission’
**NOTE**Before I allow you to continue reading, I need to first know to I need to create a password in my user account, or turn off UAC to create a scan network folder on my PC? If so, then that is what I need to do to correct this issue.
Steps I have performed in attempting to accomplish this task:
In Windows to create shared folder:
1) Created folder.
2) Open folder properties, under 'sharing' tab, selected 'Share' button, then selected 'Share' button.
3) A dialog window appears and states 'Sharing items', and when it is complete, it states "Your folder is shared. You may e-mail these links to notify people that you have shared these files, or copy the links onto the Windows clipboard, where you can paste them into any program you choose.”
4) When I select ‘Done’, it returns to the folder properties, and states in ‘Network File and Folder Sharing’ under ‘Sharing’ tab under ‘Network Path’: ‘Not Shared’.
**I don’t understand that it just said ‘Your folder is shared’, then under Network Path is stated ‘Not Shared’.**
5) Since in stated ‘Not Shared’, I selected ‘Advanced Sharing’, checked ‘Share this folder’ box, and under ‘Permissions’, checked ‘Full Control’ box.
6) Now it states Shared, and under ‘Network Path’ states the location: ‘ \\ADMIN-PC\ScantoDV9825 ’
In the HP Officejet Pro 8600 N911g, Embedded Web Server to add network folder to scan to:
1) Opened ‘Scan’ section by clicking on the tab ‘Scan’. Under ‘Network Folder Setup’, the ‘Network Folder Configuration’ clicked on ‘New’.
2) Entered data for the following fieldsTEP 1 OF 4: Display Name: ‘Scan’, Network Path: ‘\\ADMIN-PC\ScantoDV9825’. Left User Name and Password fields blank. STEP 2 OF 4: Left PIN fields blank. STEP 3 OF 4: Did not make any changes, used default settings.
3) In STEP 4 OF 4 when I click on Save and Test, it returns with the message ‘No write permission’
How do I resolve this issue of ‘No write permission’?
Thank you.
~Robert M.
This question was solved.
View Solution.

Hi Robert,
First ensure the permissions are also set correctly by right clicking the shared folder, and then open the Security tab.
If your user name is not listed as Full Control click the edit button, add your user name and check the box for as Allow full control.
If that does not help, follow these steps in Windows Vista to make sure that your computer is configured to allow network sharing.
Step one: Make sure that the computer user account is password protected
Click the Windows icon ( ), and then click Control Panel .
Click User Accounts , and then select the account you used to log into the computer.
Click Change your Windows password , and then find the user account you used to log into the computer.
If the user account is password protected , continue to the next step.
If the user account is not password protected , click Create a password for your account to create a password, and then continue to the next step.
Step two: Define the network location
Click the Windows icon ( ), and then click Control Panel .
Click Network and Internet .
Click Network and Sharing Center .
Click Customize next to Your Network . The Set Network Location window opens.
Select Private , click Next , and then click Close .
Step three: Make sure that the network sharing and discovery options are correct
Open the Network and Sharing Center window.
In the Sharing and Discovery section, make sure that the following network options are set to On :
Network Discovery
File Sharing
Public Folder Sharing (password required)
Printer Sharing (password required)
Password Protected Sharing
Your computer network is now successfully set to complete the Scan and Fax to Network Folder or Digital Fax to Network Folder Wizard.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

WLST script to create network channel

Hi,
I was not able to find a sample WLST script to configure network channels on the Weblogic server. Could somebody provide pointers?
Himadri

Hello,
hopefully you have already got answer to your question from some other source, but here's any way how I update DbAdapter configuration.
I generate deployment plan for DbAdapter in development time by admin console like you have done.
Copy the deployment plan to production environment, then use wlst or weblogic.Deployer to update adapter:
source <domain location>/bin/setDomainEnv.sh
java weblogic.Deployer -adminurl t3://<admin-url>:<admin server port> -user <admin user> -password <password> -update -name DbAdapter -plan <db plan location>/DBPlan.xml
This way I can do my production environment deployment script based, no need to use GUI.
It's also possible to use wlst instead of weblogic.Deployer, but haven't tried that yet.
Hope this was helpful.
regards, Matti

Entry Channel setup for multiple company codes

Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.

Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep

Laserjet pro 200 color mfp m276nw network folder setup on PC Windows 7

I am trying and trying and trying to setup my Network Folder Setup and I either get the message that there is an error with the file path or an error with my username.
I DO NOT have a password for my username.
I have copied and pasted the file path \\OWNER-PC\Scanning
The file is definately set-up for sharing and all permissions are enabled.
I am not putting in a PIN at this time.
Can anyone help me to setup this network folder?
This question was solved.
View Solution.

Hi @Username57 ,
I understand that you are having issues setting up the network folder. I will certainly do my best to help you.
I have provided a document with the steps for setting up the scan to network folder.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
It is usually a issue with the Network Path for the network folder created.
Create a folder anywhere on the computer.
Right click the folder and left click properties, select the Sharing tab, click the Share button, select who you want to share the folder with or everyone. On the same Sharing tab copy the Network Path. (example \\envy1730\users \Envy\desktop\networkfolder
In the embedded web server for the printer go to the Scan tab, select network folder setup, paste in the path for the network folder. Go through the wizard.
If those steps don't work then follow steps 1, 2, 3, to resolve this issue to try and get the network folder and path.
Step one: Make sure that the computer user account is password protected.
1.Click the Windows icon, then click Control Panel.
2.Click User Accounts, then select the account you used to log into the computer.
3.Click Change your Windows password, then find the user account you used to log into the computer.
•If the user account is password protected, continue to the next step.
•If the user account is not password protected, click Create a password for your account to create a password, and then continue to the next step.
Step two: Define the network location
1.Click the Windows icon, then click Control Panel.
2.Click Network and Sharing Center.
3.In the View your active networks section, click Public network under your network name. The Set Network Location window opens.
4.Select Home Network or Work Network, then click Close.
Step three: Make sure that the network sharing and discovery options are correct
1.Open the Network and Sharing Center window.
2.Click Choose homegroup and sharing options.
3.In the Share libraries and printers section, select Documents.
4.In the Other homegroup actions section, click Change advanced sharing settings.
5.In the Advanced sharing settings window, make sure that the following network options are turned on:
•Network discovery
•File sharing
•Public folder sharing (read and write access)
•Password protected sharing
6.Click Save changes.
7.Your computer network is now successfully set to complete the Scan and Fax to Network. Folder or Digital Fax to Network Folder Wizard.
One user on another post had to do the following:
There was a problem in the "advanced sharing settings window". They turned it off, the option which is after the 128 encryption, I mean the "password protected sharing".
Please let me know the outcome.
Happy New Years!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

MULTIPLE LISTENER의 LOAD BALANCING 및 2개의 NETWORK CARD 사용 시 SETUP

제품 : SQL*NET
작성날짜 : 1997-11-24
MULTIPLE LISTENER의 LOAD BALANCING 및 2개의 NETWORK CARD 사용 시 SETUP
=====================================================================
Oracle V7.3의 SQL*Net 2.3의 새로운 기능으로 여러 개의 Listener를 띄우면서
상호 Load Balancing을 유지하는 기능을 소개하고자 한다.
Load Balancing 기능을 이용하여 각각의 Listener와 Oracle Instance 간의
Overloading을 줄일 수 있다.
다음의 예는 하나의 장비 내에 2개의 Network Card가 있을 경우에 대해 setup을
하는 방법이며 만일 하나의 Network Card가 있을 경우는 Host는 하나만 지정
하면 된다.
1. init<SID>.ora file을 지정할 Parameter
MTS_MULTIPLE_LISTENERS=TRUE
COMPATIBLE=7.3.2.0
2. 예를 들어 Listener를 2개 사용하는 경우라면 initSID.ora에
mts_dispatchers="tcp,10"
mts_max_dispatchers=20
mts_servers=20
mts_max_servers=40
mts_service=ORA73
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1621)(host=152.69.30.100))
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1622)(host=152.69.30.100))
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1623)(host=152.69.30.102))
mts_listener_address="(address_list=
(address=(protocol=tcp)(port=1624)(host=152.69.30.102))
3. listener.ora file에 설정되는 내용은
LISTENER1 =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.100)
(PORT=1621)
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.100)
(PORT=1622)
LISTENER2 =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.102)
(PORT=1623)
(ADDRESS =
(PROTOCOL = tcp)
(HOST = 152.69.30.102)
(PORT=1624)
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORA73)
(ORACLE_HOME=/oracle2/ora73/app/oracle/product/7.3.2)
SID_LIST_LISTENER2 =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORA73)
(ORACLE_HOME=/oracle2/ora73/app/oracle/product/7.3.2)
STARTUP_WAIT_TIME_LISTENER1 = 0
STARTUP_WAIT_TIME_LISTENER2 = 0
CONNECT_TIMEOUT_LISTENER1 = 0
CONNECT_TIMEOUT_LISTENER2 = 0
4. tnsnames.ora file에 설정되는 내용들
* 다수의 port에 Random하게 접속하는 경우
RANDOM =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.100)
(Port = 1621)
(CONNECT_DATA =
(SID = ORA73)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.100)
(Port = 1622)
(CONNECT_DATA =
(SID = ORA73)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.102)
(Port = 1623)
(CONNECT_DATA =
(SID = ORA73)
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 152.69.30.102)
(Port = 1624)
(CONNECT_DATA =
(SID = ORA73)
* 개개의 Port로 접속하는 경우
TORA1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1621)
(CONNECT_DATA =
(SID = ORA73)
TORA2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1622)
(CONNECT_DATA =
(SID = ORA73)
TORA3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1623)
(CONNECT_DATA =
(SID = ORA73)
TORA4 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host =krrcsun)
(Port = 1624)
(CONNECT_DATA =
(SID = ORA73)
5. 각각의 Listener를 띄우는 방법
$ lsnrctl start LISTENER1
$ lsnrctl start LISTENER2

SiteProtector & Network Sensor Setup

Dear All,
Dose any one of you have document for setting UP a SiteProtector & Network Sensor Setup.I want to do this.
Regards
Nil

Have a look at http://cisco.com/en/US/docs/security/security_management/cs-mars/4.3/user/guide/local_controller/cfgidsn.html#wp1215942 for more information.

Saving a channel setup...

I have found a channel setup that I am using to record guitar. It's actually two channels. I split the signal from the guitar with one cable going to a external effects processor and stereo into LE, and the 2nd going direct through a preamp to LE. I have put some effects on each channel and I have found a sound that I really (really) like. Can I save these two channel setups in such a way that they can be used in other projects?

Click on the little white arrow near the inserts in each channel strip and save your settings.
cheers
rob

Network Organisation Setup

Hi,
When i created a new inv network organisation in IC .
Oracle Inventory defaults the shipping information I entered in the Organization Parameters window .
When i create a new organization i would like to change the default intransit account. ( But the field is no accessible)
i do forms personalization to open a field but i doesnt work.
In forms personalizations ( Select Help > Diagnostics > CustomCode > )but the Personalizations screen will not run
If someone no how to do, olease help?
ps : My organization cost method : Is average cost
Regards
Thierry

Originally Posted by willemellis
I am having difficulty connecting to the internet. I have tried static IP and DHCP but nothing works. I am sure I have all the correct information. I am using the Network Card Setup utility. Am I missing something? Any insight would be appreciated.
The install defaults to DHCP, If your workstation can connect to the internet, then the server should be able also.

Network Card Setup

I am having difficulty connecting to the internet. I have tried static IP and DHCP but nothing works. I am sure I have all the correct information. I am using the Network Card Setup utility. Am I missing something? Any insight would be appreciated.

Originally Posted by willemellis
I am having difficulty connecting to the internet. I have tried static IP and DHCP but nothing works. I am sure I have all the correct information. I am using the Network Card Setup utility. Am I missing something? Any insight would be appreciated.
The install defaults to DHCP, If your workstation can connect to the internet, then the server should be able also.

Network channel checker app

hi all,
just wondering if there is a good network channel checker app to see what channel i can make my wireless access point as i want it to use a free unused channel
many thanks
rob

Is this request for Windows Phone?
Count me in for a WP version of the very useful Connectivity Analyzer app for Symbian by Nokia.

Adding new dual band AEBS-initial setup question--join network or setup new

Upon the initial setup of a new dual band AEBS, do I join my current network or setup a new network?
I bought this just so I can set up a separate 5GHz band to force my newer computers to a faster network. I know that the 5GHz band needs it's own new network name. I am just wondering how to do it at the very beginning after I plug it in. I want the 2.4GHz band to connect on the network I already have, and the 5GHz band to be a new name.
Thanks!

Looks like Bob has already given you the correct steps. In addition to his comments, I would like to offer the following suggestions:
o Before trying to configure either base station to extend your new DB AEBSn, I would strongly suggest that you perform a "hard" reset on the AEBSn & a "factory default" reset on the AXn.
o Place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. To make it even simpler and avoid having to "switch" wireless networks during the setup, attach each to the DB AEBSn via Ethernet.
o Remember each base station will only be able to extend one of the DB AEBSn's radios so try to select the appropriate base station for the job.
o I would recommend the following radio mode combination for your DB AEBS: 802.11n only (5 GHz) - 802.11b/g/n. This will prevent any 'stray' 802.11a wireless clients from connecting to the 5 GHz network and affecting its overall bandwidth performance.

AS2(SOA-B2B) Channel Setup for Inbound/Outbound

Hi
Can anyone share a document on how to setup AS2(SOA-B2B) Channel Setup for Inbound/Outbound? We are trying to configure AS2 (SSL), but test with partner is failing.. any document would help...
Appreciate your help
--Sri

One options is to use a java callout in the inbound agreement.
Ismail M.

Administration port - network channel for admin traffic

I am trying to configure a separate channel for Administration traffic on weblogic. I followed the oracle docos and configured the SSL, domain wide admin port, server listen address, ‘admin’ channel.
The issue is admin traffic in not happening through the newly created channel.
L2 network is not getting used. I can’t see any activity in the monitoring tab of new Channel. Also the netstat is showing that the port 9101/9102 is getting used on the 192.168.100.218 and not on 10.254.252.849.
I also tried by setting up the newly created channel weight as 51, but no luck.
Is JMX connectivity related to admin channel?
Any help is highly appreciated. Thanks.
Ipconfig:
Admin: adminserver701.mycompany.internal, 192.168.100.238, 10.254.252.808
Managed: appserver701.mycompany.internal, :192.168.100.218, 10.254.252.849
Domain wide admin port: 9101
Admin:
Listen address –> adminserver701.mycompany.internal
Channel –> admin -> 10.254.252.808/9101
Startup -> -Dweblogic.admin.ListenAddress=admin://10.254.252.808:9101
Managed:(appserver701)
Listen address –> appserver701.mycompany.internal
Admin port override: 9102
Channel –> admin -> 10.254.252.849/9102
Startup -> -Dweblogic.admin.ListenAddress=admin://10.254.252.849:9102
AdminServer Logs:
####<Feb 18, 2013 1:53:33 PM EST> <Info> <JMX> <adminserver701.mycompany.internal> <soa_as> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361159613346> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://adminserver701.mycompany.internal:9101/jndi/weblogic.management.mbeanservers.runtime .>
####<Feb 18, 2013 1:53:33 PM EST> <Info> <JMX> <adminserver701.mycompany.internal> <soa_as> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361159613353> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://adminserver701.mycompany.internal:9101/jndi/weblogic.management.mbeanservers.edit .>
####<Feb 18, 2013 1:53:33 PM EST> <Info> <JMX> <adminserver701.mycompany.internal> <soa_as> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361159613367> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://adminserver701.mycompany.internal:9101/jndi/weblogic.management.mbeanservers.domainruntime .>
####<Feb 18, 2013 1:53:36 PM EST> <Notice> <Server> <adminserver701.mycompany.internal> <soa_as> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361159616699> <BEA-002613> <Channel "DefaultAdministration" is now listening on 192.168.100.238:9101 for protocols admin, ldaps, https.>
####<Feb 18, 2013 1:53:36 PM EST> <Notice> <Server> <adminserver701.mycompany.internal> <soa_as> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361159616700> <BEA-002613> <Channel "Channel-0" is now listening on 10.254.252.808:9101 for protocols admin, ldaps, https.>
####<Feb 18, 2013 1:55:12 PM EST> <Notice> <Server> <adminserver701.mycompany.internal> <soa_as> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <cd259038c7dcf5a8:-26ac3ba0:13ceb6f767d:-8000-000000000000001a> <1361159712920> <BEA-002613> <Channel "Default" is now listening on 192.168.100.238:7001 for protocols iiop, t3, ldap, snmp, http.>
####<Feb 18, 2013 1:55:12 PM EST> <Notice> <Server> <adminserver701.mycompany.internal> <soa_as> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <cd259038c7dcf5a8:-26ac3ba0:13ceb6f767d:-8000-000000000000001a> <1361159712920> <BEA-002613> <Channel "DefaultSecure" is now listening on 192.168.100.238:7002 for protocols iiops, t3s, ldaps, https.>
ManagedServer Logs:
####<Feb 18, 2013 2:54:19 PM EST> <Info> <JMX> <appserver701.mycompany.internal> <adp_ms01> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361163259911> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://appserver701.mycompany.internal:9102/jndi/weblogic.management.mbeanservers.runtime .>
####<Feb 18, 2013 2:54:20 PM EST> <Notice> <Server> <appserver701.mycompany.internal> <adp_ms01> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361163260350> <BEA-002613> <Channel "Channel-0" is now listening on 10.254.252.849:9102 for protocols admin, CLUSTER-BROADCAST-SECURE, ldaps, https.>
####<Feb 18, 2013 2:54:20 PM EST> <Notice> <Server> <appserver701.mycompany.internal> <adp_ms01> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1361163260350> <BEA-002613> <Channel "DefaultAdministration" is now listening on 192.168.100.218:9102 for protocols admin, CLUSTER-BROADCAST-SECURE, ldaps, https.>
####<Feb 18, 2013 2:54:58 PM EST> <Notice> <Server> <appserver701.mycompany.internal> <adp_ms01> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d3208ed6c2482016:-46ac5fed:13ceba69a8e:-7ffe-000000000000000e> <1361163298045> <BEA-002613> <Channel "DefaultSecure" is now listening on 192.168.100.218:7102 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
####<Feb 18, 2013 2:54:58 PM EST> <Notice> <Server> <appserver701.mycompany.internal> <adp_ms01> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <d3208ed6c2482016:-46ac5fed:13ceba69a8e:-7ffe-000000000000000e> <1361163298045> <BEA-002613> <Channel "Default" is now listening on 192.168.100.218:7101 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
AdminServer logs update while starting managed:
####<Feb 18, 2013 2:54:57 PM EST> <Info> <JMX> <adminserver701.mycompany.internal> <soa_as> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <cd259038c7dcf5a8:-26ac3ba0:13ceb6f767d:-8000-0000000000000162> <1361163297488> <BEA-149506> <Established JMX Connectivity with adp_ms01 at the JMX Service URL of service: jmx:admin://appserver701.mycompany.internal:9102 /jndi/weblogic.management.mbeanservers.runtime.>
Admin Server :
[oracle@adminserver701 bin]$ netstat -an | grep 9101
tcp 0 0 10.254.252.808:9101 0.0.0.0:* LISTEN
tcp 0 0 192.168.100.238:9101 0.0.0.0:* LISTEN
tcp 0 0 192.168.100.238:9101 192.168.100.218:59038 ESTABLISHED
I am wondering if the JMX connectivity is using the server listen address (adminserver701.mycompany.internal) which will by default resolve to 192.168.100.238. Is there a way to force JMX to use 10.254.252.808?

Hi
For first question the answer is no. With the administration port, you enable the SSL between the admin server and Node manager-managed Servers. You can still use the web console.
For teh second question, you can use ANT or can use the WLS Scripting ..you can get more details in dev2dev.bea.com
Jin

Exadata v2 - admin network

Good day all.. Does anyone know if the admin IP is required for exadata v2 functionality? The database servers come equipped with 4 onboard GB interfaces. We would like to store our Oracle binaries on NFS storage, and bond two of the onboard interfaces for the NFS network, and bond the other two onboard interfaces for client (front-end) access. If possible, we'd like to administer the database servers through the front-end. Does anyone see a problem with this setup? Thank you in advance.

You can use the 'public' ip to ssh and do whatever you want.
The important things to keep in mind are:
1- As Dan said, the standard install, as done by ACS (included in the price), is to put the binaries on the local disks, it has many advantages over putting them on any NFS (shared home). If you want to change that, they may require additional work (that may lead to additional fees, but this is to be discussed with your sales rep)
2- changing the ip setup, before install, can be done, but probably is also outside the standard config, and hence you get back to the last phrase of point 1.
3- the whole idea behind DB Machine, is to have it as an appliance, make things easier and cleaner for the client, and you usually should not change much things in an appliance's setup.
just my 2cents

Admin network channel setup

Similar Messages

Maybe you are looking for