Admin Tool Not Opening In Windows 2003 x64

Hi Everybody ,
I installed OBIEE 11G on Win 2003 x64 bit OS, Everything went well but the admin tool is not starting . After a search in a forum I comes to know that Admin tool wont support for x64 bit . Can any one suggest me how to start Admin tool in Win 2003 x64 bit OS .
Thanks In Advance ,
Qujes

Hi,
Check this : Admin tool crash
Regards,
Srikanth

Similar Messages

  • OBIEE 11.1.1.7, Win 8, Admin tool not opening.

    Dear Experts,
    I have recently installed OBIEE 11.1.1.7, on windows 8, 64bit, I3 processor and 6 GB ram configuration.
    Installation is successfull, i can login all console,em, answers etc.
    Only issue is Administration tool to manage to RPD is not opening. It just pops up the CMD windows and then stays there at it is.
    No further progress after that.
    Could you please let me know, since it's in my home laptop, can i install OBIEE client separately in the same machine in which server is installed?
    the whole installation seems to be useless if i can't edit RPDs.
    thanks.

    I did a deinstall, and installed whole OBIEE 11.1.1.7 again. This i time noticed while installing it i had to run the installation wizard in compatibility mode.
    And the windows version this wizard was comfortable was windows XP.
    Also during installing it, at one of the initial stage it showed an error of operating system certification but i opted to ignore and continue with the installation.
    It went through all the configuration steps too.
    but again not able to find how to load Admin tool. I know for sure there is one condition in which the tool loads and works fine but not sure what is that.
    any help will be greatly appreciated.
    thanks.

  • OBIEE Administration tool not opening in windows 8.1

    Hi,
    I have Windows 8.1 64-bit machine installed. I installed OBIEE 11.1.1.7 and the Admin tool doesn't open forever. I read somewhere installing 32 bit version works on windows 8.1. How true is that ? Or OBIEE is completely not compatible with windows 8.1 ?
    Any recommendations/solutions would be greatly appreciated.
    Thanks,
    Vinoth

    Hi,
    If you look at the compatibility matrix you can see the Admin tool is only supported up to Windows 7, there is no official support for Windows 8 / 8.1 on the current version (new versions will maybe introduce it).
    I also read somewhere the 32bit version works, but I also read it was extremely slow when opening (10-15 minutes) and no guarantee everything works.
    In the end the best solution is probably to run it in a VM for now waiting for new releases.

  • OBIEE 11g BI Admin tool not working on Windows 7 64bit - Any alternative???

    Hi Experts,
    I installed OBIEE 11G on Win 7 64 bit after a long struggle it went well but the admin tool is not starting..........After a search in the forum i came to know that 64 bit os can run obiee client tools. is there any work around for this? I don't want to move to 32 bit os again after taking this much struggle in installation.............can any one suggest me an alternative to work with admin tool. Using VMware 32 bit windows is an option but I don't want to go with it.
    Bellow is the screen shot of the error.
    http://img42.imageshack.us/img42/9389/biadmintoolerror.png
    Thanks in advance,
    DK
    Edited by: user12296343 on Sep 19, 2010 6:28 PM

    "There is currently no standalone, Windows 64‐bit Oracle Business Intelligence Client Tools installer, however the Windows 32‐bit Oracle BI client tools are compatible with 64‐bit Windows platforms per the certification document."
    Source: Oracle Business Intelligence Developer Client Tools Installer (11.1.1.3.0)
    http://download.oracle.com/otn/nt/bi/111130/biee_11.1.1.3_client_install_README_13_JAN_2011.pdf
    The Certification Document: System Requirements and Supported Platforms for Oracle Business Intelligence Suite Enterprise Edition 11gR1
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
    Tab: Current System Certificatin
    Row: 46

  • Reader 8.1.3 installer does not start on Windows 2003 x64

    Hello,
    i use Windows Server 2003 SP2 as 64 Bit edition on AMD and have installed Reader 8.1.2 successfully. Now i tried to install 8.1.3, which is the most recent of the 8th series i found, and fail because the installer simply does nothing! It starts up and then nothing happens. I've downloaded the EXE several times directly from Adobe with the same result.
    What can i do?

    Sorry, i still don't get why 8.1.2 runs perfectly (and yes, there is a 64bit support for Windows 2003 Server!) and 8.1.3 did not even start. That makes no sense to me.
    And because i want do deploy 8.1.3 even update is no alternative for me.

  • Itune not openes in windows 8. i have tried opening in compability and admin mode but no success

    itune not openes in windows 8. i have tried opening in compability and admin mode but no success.

    can anybody explain why this is happenning.
    It must be problem of itune.
    This is crap software

  • Oracle ODBC Driver (Windows 2003 x64 Server)

    Hi all
    I have some trouble with this ODBC Driver ...
    I have installed Oracle Client 10.2.0.1.0 with the ODBC Driver and SQLplus etc.
    Now I have configured in the "Net Manager" some "Service Naming" as I did
    on other servers before. Then I Test the connection in the "Net Manager" it
    seams to work fine.
    When I now try to connect in SQL Plus the following error comes up:
    ORA-12154: TNS:could not resolve the connect identifier specified
    I did already do this:
    - Add "...\NETWORK\ADMIN" to the Path Variable of the server
    - sqlnet.ora looks like:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    - tnsnames.ora looks like:
    MyName.WORLD =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = myDomain.net)(PORT = 1521))
    (CONNECT_DATA =
    (SID = DBSIDxx)
    What do I have to do to get this working ???
    Thanks for any comments!
    Best regards
    Frank Uray

    Nevermind, I think I'm to assume that this is the same as:
    Re: unable to use SQL Plus (Windows 2003 x64 Server)

  • Firefox will not open multiple windows.

    Just upgraded to Firefox 3.6.3. I can open multiple tabs in the open window, but I can not open another window. Possibly unrelated issue is the search bar not functioning.
    As for the window issue, I've tried;
    Ctrl + N
    File [N]
    File -> New Window
    Rt Click Link -> Open in New Window
    Nothing whatsoever happens with either of these attempts.
    As for the Search bar I've tried to input a search and press [Enter] as well as clicking the magnifying glass with the mouse. As with the window issue nothing happens.
    I'm not sure if these issues are related. Restarting does not fix these.
    Addons are:
    Adblock Plus v1.2
    Add to Search Bar v2.0
    All-in-One Sidebar v0.7.11
    Bookmark This Page Plus v0.3.3
    ChatZilla v0.9.86
    Download Youtube Videos + v2.1.3
    DownThemAll! v1.1.9
    FEBE v6.3.3
    Flashblock v1.5.13
    Greasemonkey v0.8.20122408.6 (This looks very odd to me o.O)
    Java Console v6.0.18
    Java Quick Starter v1.0
    Microsoft .NET Framework Assistant v1.2.1
    Move Media Player v7
    NoScript v1.9.9.77
    Personas v1.5.3
    ReloadEvery v3.6.3
    Stealther v1.0.8
    WebMail Notifier v2.4.1
    == This happened ==
    Every time Firefox opened
    == Updating Firefox

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Oracle 11.1.0.7.0 patch 5 for windows 2003 x64.. Please help.

    Hello All
    I have Oracle EE 11.1.0.7.0 running on Windows 2003 x64 server plus ASM, and I want to apply patch 5, so that it becomes 11.1.0.7.5.
    I came to know from Oracle Support Services, Windows patche comes as bundled patchset, but I am not sure which patch to apply, there are 38 of them. Is 11.1.0.7.5P the correct one?.
    Patchset Avaialble:
    11.1.0.7.0 Patch 38 (11.1.0.7.38P) 32-Bit Patch:11741169 64-Bit (x64) Patch:11741170
    11.1.0.7.0 Patch 37 (11.1.0.7.37P) 32-Bit Patch:10636464 64-Bit (x64) Patch:10636465
    11.1.0.7.0 Patch 36 (11.1.0.7.36P) 32-Bit Patch:10350787 64-Bit (x64) Patch:10350788
    11.1.0.7.0 Patch 35 (11.1.0.7.35P) 32-Bit Patch:10245099 64-Bit (x64) Patch:10245101
    11.1.0.7.0 Patch 34 (11.1.0.7.34P) 32-Bit Patch:10168052 64-Bit (x64) Patch:10168056
    11.1.0.7.0 Patch 33 (11.1.0.7.33P) 32-Bit Patch:9773817 64-Bit (x64) Patch:9773825
    11.1.0.7.0 Patch 32 (11.1.0.7.32P) 32-Bit Patch:9930894 64-Bit (x64) Patch:9930895
    11.1.0.7.0 Patch 31 (11.1.0.7.31P) 32-Bit Patch:9846179 64-Bit (x64) Patch:9846180
    11.1.0.7.0 Patch 30 (11.1.0.7.30P) 32-Bit Patch:9869911 64-Bit (x64) Patch:9869912
    11.1.0.7.0 Patch 29 (11.1.0.7.29P) 32-Bit Patch:9718019 64-Bit (x64) Patch:9718020
    11.1.0.7.0 Patch 28 (11.1.0.7.28P) 32-Bit Patch:9707661 64-Bit (x64) Patch:9707665
    11.1.0.7.0 Patch 27 (11.1.0.7.27P) 32-Bit Patch:9604444 64-Bit (x64) Patch:9604446
    11.1.0.7.0 Patch 26 (11.1.0.7.26P) 32-Bit Patch:9523179 64-Bit (x64) Patch:9523181
    11.1.0.7.0 Patch 25 (11.1.0.7.25P) 32-Bit Patch:9392331 64-Bit (x64) Patch:9392335
    11.1.0.7.0 Patch 24 (11.1.0.7.24P) 32-Bit Patch:9384493 64-Bit (x64) Patch:9384497
    11.1.0.7.0 Patch 23 (11.1.0.7.23P) 32-Bit Patch:9264211 64-Bit (x64) Patch:9264214
    11.1.0.7.0 Patch 22 (11.1.0.7.22P) 32-Bit Patch:9166858 64-Bit (x64) Patch:9166861
    11.1.0.7.0 Patch 21 (11.1.0.7.21P) 32-Bit Patch:9082702 64-Bit (x64) Patch:9082709
    11.1.0.7.0 Patch 20 (11.1.0.7.20P) 32-Bit Patch:9025140 64-Bit (x64) Patch:9025144
    11.1.0.7.0 Patch 19 (11.1.0.7.19P) 32-Bit Patch:8928976 64-Bit (x64) Patch:8928977
    11.1.0.7.0 Patch 18 (11.1.0.7.18P) 32-Bit Patch:8832980 64-Bit (x64) Patch:8832986
    11.1.0.7.0 Patch 17 (11.1.0.7.17P) 32-Bit Patch:8783655 64-Bit (x64) Patch:8783657
    11.1.0.7.0 Patch 16 (11.1.0.7.16P) 32-Bit Patch:8689191 64-Bit (x64) Patch:8689199
    11.1.0.7.0 Patch 15 (11.1.0.7.15P) 32-Bit Patch:8655458 64-Bit (x64) Patch:8655460
    11.1.0.7.0 Patch 14 (11.1.0.7.14P) 32-Bit Patch:8603948 64-Bit (x64) Patch:8603952
    11.1.0.7.0 Patch 13 (11.1.0.7.13P) 32-Bit Patch:8553512 64-Bit (x64) Patch:8553515
    11.1.0.7.0 Patch 12 (11.1.0.7.12P) 32-Bit Patch:8508245 64-Bit (x64) Patch:8508247
    11.1.0.7.0 Patch 11 (11.1.0.7.11P) 32-Bit Patch:8451592 64-Bit (x64) Patch:8451598
    11.1.0.7.0 Patch 10 (11.1.0.7.10P) 32-Bit Patch:8416539 64-Bit (x64) Patch:8416540
    11.1.0.7.0 Patch 9 (11.1.0.7.9P) 32-Bit Patch:8343061 64-Bit (x64) Patch:8343070
    11.1.0.7.0 Patch 8 (11.1.0.7.8P) 32-Bit Patch:8297200 64-Bit (x64) Patch:8297201
    11.1.0.7.0 Patch 7 (11.1.0.7.7P) 32-Bit Patch:8260294 64-Bit (x64) Patch:8260301
    11.1.0.7.0 Patch 6 (11.1.0.7.6P) 32-Bit Patch:8219259 64-Bit (x64) Patch:8219268
    *11.1.0.7.0 Patch 5 (11.1.0.7.5P) 32-Bit Patch:7712568 64-Bit (x64) Patch:7712570*
    11.1.0.7.0 Patch 4 (11.1.0.7.4P) 32-Bit Patch:7682184 64-Bit (x64) Patch:7682189
    11.1.0.7.0 Patch 3 (11.1.0.7.3P) 32-Bit Patch:7664953 64-Bit (x64) Patch:7675231
    11.1.0.7.0 Patch 2 (11.1.0.7.2P) 32-Bit Patch:7586190 64-Bit (x64) Patch:7586195
    11.1.0.7.0 Patch 1 (11.1.0.7.1P) Only available in 32-Bit Patch:7540527
    Any help would be great.
    Regards
    Amit

    Hi All
    I have applied this patch 38 for Oracle 11.1.0.7.0 on Windows 2003 x64 bit server today but the database version from v$version didn't change at all and still its showing 11.1.0.7.0, I expected it to show 11.1.0.7.5.
    Any suggestions.
    Regards
    Amit

  • ICloud Control Panel 2.1 will not install on Windows 7 x64

    iCloud Control Panel 2.1 will not install on Windows 7 x64. If I try the to run the install from the Apple Software Updater it the iCloud 2.1 crashes and I get a message that suggests I do a download only  and they run it locally. I do that and the install i.e. the exe file just seems to never start even if I try to "Run as Admin"
    I go int o task manager and there is no instance of the install running.
    What is the issue/work around to this?
    Thx to all for help.
    Michael

    I didn't try creating a new user profile. Not sure I completely understand what you're suggesting. I dont't want a new/different profile. I just want to be able to install the update.

  • 210-4125 will not boot when windows 7 x64 is installed

    i have posted this problem a while ago "210-4125 will not boot when windows 7 x64 is installed"
    hoping that some one new might have had the same problem
    HP.......................................HP MINI PC  210-4125
    model ................................210-4125
    Bios ...................................F08
    ser no................................ [edited Serial Number by Moderator]
    product no.........................A8V56EA#ABU
    Ram ..................................4.0 GB
    system board ID............... 338d
    processor .........................Atom(TM) CPU N2800 1.86GHz
    Product configuration ID..0797200000204600000300100
    acording to INTEL the cpu is X64 bit, but the bios will not let a X64 boot up only a x32 bit ?
    and i get a message on black screen  "you are trying to load an opperating system not compatable" or some thing like that
    it would seem that the bios is the problem and not the CPU ? the 08 bios update only covers x32 bit and not x64
    if any one out there is running x64 bit windows 7 on the 210-400 range of netbook   can you tel me
    1. model no
    2.CPU
    3.Ram installed
    4 bios No
    thank you
    JB

    thank you George
    i will bear that in mind next time
    i see that you work for HP ? do you have any suggestion's for my problem ?
    as i mentioned before the notebook works faultlessly when X64 windows 7 is installed via the OEM disk in the external DVD drive , but if i disconnect the DVD drive it will not boot, but gets stuck in boot loop , then if i connect the drive with any windows installation disc loaded in it , it loads perfect and works perfect even if i disconnect when loaded  , but i can not keep the drive connected ?
    i have tried to use a USB flash drive to install X64 windows 7 but it comes back that the present CPU is not compatible ??
    when it clearly states on Intel web site that it is and it works perfect when loaded ?? even the Windows update manager confirms that it will run all X64 windows OS
    i understand the the bios "InsydeH20" is a very difficult bios to work with, and that Insyde have blocked the "hidden menu" via software ? i have exhausted all the software functions to open the complete bios that i can find at the moment  ,  i think it is locked out from out side the bios and not from inside.?
    any  pointers in the right direction would be very helpful  ,
    many thanks
    John

  • Firefox 30 will not open new windows maximized

    I use Firefox on 2 machines, one at home and one at work. I updated both to Firefox 30.
    My home machine, with Windows 7 opens new windows maximized.
    My work machine, however, will not open new windows maximized. It will only open them at the last remembered window size. I have tried deleting localstore.rdf and this does not solve the issue.
    The window will open maximized on Firefox 28 on the same machine.

    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
    While you are in safe mode;
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart.

  • I can not open new windows

    When I´m on the internet I can not open new windows, not by ¨file new windows ¨ or by ctrl N. New tabs work but no new windows. It worls well with all other browsers.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 10.0 r32
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • SQL Developer on Windows 2003 x64 Edition "failed to initialize..."

    I am trying to run sqldeveloper on Windows server 2003 x64 and I get the following error:
    The application failed to initialize properly (0xc0000018). Click on OK to terminate the application.
    I get this error with the version with jre, and with the version without the jre.
    I have Java 1.6 installed on that server (applet shows up under x86 control panels)
    I can reproduce this on two different win 2003 x64 servers, but it works fine on a windows 2003 standard (32 bit)
    Any idea how to fix this?
    thanks.

    This might not be the right place to post this question, but will give it a shot . . .
    I've installed JDK 1.5 and downloaded/unzipped SQL Developer on my Windows 2003 x64 server, then launched sqldevelper.bat from the advice given above -- but I get an error saying:
    'java' is not recognized as an internal or external command,operable program or batch file.
    I made sure I have java installed:
    C:\Program Files (x86)\Java>dir
    Volume in drive C has no label.
    Volume Serial Number is A86A-1831
    Directory of C:\Program Files (x86)\Java
    03/29/2007 07:29 PM <DIR> .
    03/29/2007 07:29 PM <DIR> ..
    03/26/2007 06:01 PM <DIR> j2re1.4.2_12
    03/29/2007 07:24 PM <DIR> jdk1.5.0_05
    03/29/2007 07:25 PM <DIR> jre1.5.0_05
    03/29/2007 07:29 PM <DIR> jre1.5.0_11
    What am I doing wrong, that would cause 'java' is not recognized as an internal or external command,operable program or batch file?

  • Netweaver 04 on Windows 2003 x64 (amd64)

    Hi all,
    Can anybody tells me where I can find the corresponding Installation Master Software and the SAP Kernel 6.40 Unicode for installation on Windows 2003 x64 (amd64).
    I can not find it on the SAP Marketplace myself.
    On the PAM (Product Avalability Matrix) the software should be available but I can not find it.
    Please help. It becomes very urgent.
    Kind Regards
    Paul VAn Daele
    [email protected]

    Hi Paul,
    Normally you should find it on the following path:
    (http://service.sap.com/swdc)
    Download => Installations and Upgrades => Entry by Application Group => SAP NetWeaver => SAP NETWEAVER => SAP NETWEAVER 04 => Installation and Upgrade => Windows Server => <your DB>.....
    Installation Master MS SQL (for example) for the Windows X64 is a CD named 51031282...
    Hope you can find the one you are looking for....
    Regards
    Rolf
    Ps.: If you can't see or find the right CD/DVD's it could also point to missing authorization on the Marketplace...

Maybe you are looking for