Administration Console Connection Count

I'm unable to acquire an accurate connection count for live streams. My current setup entails a live Multi-Bitrate stream via HTTP HLS and HDS with DVR (HDS) and sliding window (HLS). My connection count persistently shows five connections, which is actually the number of streams I'm delivering for the live Mult-Bitrate streams. It doesn't matter if I have 20 viewers or 100 viewers, the count always show five. Any suggestions?

Thank you Petro, this was helpul. For some reason on my Apache, I did not have to use :8134. I think the number I'm looking for is BusyWorkers. However it's kind of mis-leading because I have multi-bitrate streaming, so a viewer can represent 1 to 5 BusyWorkers. If 100 viewers are constantly switching between the multi-bitrates, then potentially I can have 500 BusyWorkers. Would 500 BusyWorkers mean 500 viewers? When reality I have 100 viewers. I did notice that after a while once, a particular bitrate becomes persistent, the BusyWorkers drop down (perhaps they expire). So if the viewers have consistent bandwidth, I can assume each BusyWorker represents a single viewer.

Similar Messages

Issue with web access in view administrator console after connection server 5.5 installation.

Hi All,
I am trying to bring up my setup with ESXi 5.5 and vcenter 5.5 U2. I made a DNS server and made two 2008 R2 machines and launched vcentre and connection manager on them.
After installing connection server 5.5, I am unable to open the web UI by clicking "view administrator console" icon on my desktop! I installed proper certificated and iis module too and confirmed that my https certificate is properly working. (snapshot attached, filename - snapshot_view_webpage.jpeg)
I google for the possible error and tried below mentioned links but none of them worked.
1.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004759
Corrected this error but still system is in same shape and i am unable to get the console's admin webpage.
2.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2001277
In this method, my admin folder didn't got recreated as the service restart got stuck for a long time and throws error that service restart got time out!!(snapshot attached)
Can some one please help me to move forward. Please let me know if you need more information from my end.
Thanks,
Jeevan

Since the policy AKS is top in sequence under service selection rule so it should hit for sure. As you wrote that even after disabling the default device admin, then also request is hitting the same and restarting the ACS services resolved the issue. The symptoms of your issue are exactly same as stated in this defect.
CSCuo93378    Certain browsers cause ACS database corruption
Due to this issue we have seen cases where request hits the disable and default policies without any reason. Actually accessing ACS via chrome mess around with all the operators in conditions.
The only workaround is to access all the rules and conditions in supported browser. Ensure all the operators are correct, save the changes and restart the ACS services.
The issue seems to be fixed in ACS 5.5 patch 5
Regards,
Jatin

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Whycan't connect the Essbase Administration console to the OLAP server?

I have a problem about Essbase Administration console.After I install all the product of the Essbase, (includeing the 6540ns?6540na?6540am?654032?6540rt?eas653_nt). i can't connect the Essbase Administration console to the Essabse OLAP server.The Administrator server,username and password is correct but there is "can't connect to the server"error. All the installtion process this time is the same as berfore i have done, and there was no question when connectting to the Essabse OLAP server before. I don't know how to solve this problem, and it hold back me to continue my other work. the essbase OlAp server and the Essbase Administration console are both installed on the same PC, useing window2000 professional best regards Lornawei

thanks for answer.server is running. Analyzer and spreadsheet add_in can connectted to the server correctly.I installed the EAS not as as a Windows service,and i cann't even login to the EAS console,and check the EAS log i remember there is some wrong with connect the Mysql services.yesterday i installed the EAS as as a Windows service,and have connect to the server correctly mannually.I don't know why I can't install the EAS not as as a Windows service now.

Not able to access the Administrator Console 7001

Dear all,
We have installed weblogic server 11.1.2 in Aix 6.1.
Installation faced lot of FIXER problems finally we fixed all the required fixers and installation and configuration compleated without any error.
In the last page of Configuration summary we got the Admin consloe and Em console address.
When i try to connect those from my system using IE it says "internet explorer cannot Display the webpage" error comes.
While on Installation we used Humming bird for graphical installation[this is the first time am using this utlity]. And more over i do not have idea how to check about the admin server start and stop from the back end[AIX].
Kindly help me how to access the Administrator Console after Installation
"Administrator Console: http://emar:7001/console"
Exepecting all expects advice and guidance.
Regards,
Paja

Hi Paja,
Please check any weblogic process are running by using.
ps -ef | grep java
use " *kill -9 < pid >* "
Now under %Domain_Home%/ bin folder.
you will find startWebLogic.sh file.
start this one using following way.
./startWebLogic.sh
Once you provide your username and password
Check your last logging like this.
*<Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.17.62.212:7001 for protocols iiop, t3, ldap, s*
in this case 10.17.62.212 is my IP address or listen address and 7001 is my http port.
if you enable SSL list port it will also show you that one.
now try to access console using http://<IP address>:port/console
provide username and password
Here we go to start your weblogic server.
Now in %Domain_Home%/ bin folder you will find one more .sh file says stopWebLogic.sh.
this will help you to stop the server.
Hope this is easy way to start and stop your server.
Regards,
kal

Weblogic Server not visible in Administration Console

Hello,
Forgive me if this is the incorrect location for this question but I could not find a relevant group to post this issue relating to the Administration Console, as it APPEARS.
We have a three node Weblogic 8.1 SP3 cluster in our environment and the issue we are facing is that one of the three Weblogic Servers (the other two have no issue) is not displaying any information about that server in the admin console (i.e. in "Monitoring"-> active thread queues, connections, performance stats etc. are not displayed). However, the BeaSVC service is running on that server and the server IS serving requests, as confirmed by the weblogic and application logs. It is as if the admin server cannot communicate or thinks the server is in a 'down' state, hence the behavior of not seeing the threads on the server.
Any suggestions, thoughts or ideas in resolving this matter would be greatly appreciated!
Many Thanks and Regards,
-Nader

Hello Nadar,
Tell me how are you starting server in the cluster, through nodemanager or commnadline.
Kuldeep

Problem Starting the Web-Based Administrative Console

I have Installed Application Server 7 Platform Edition. Everything runs smooth. The Application Server and the Administrative Server got started perfectly. I checked both of these Servers and they are working perfectly.
The problem is that when trying to connect to the Web-Based Administrative Console.
I get the prompt to enter the Admin username and the password, once I have entered, it accepts but through the following message.
�Your Sun One Application Server License does not allow Remote Administration.
Please go to http://www.sun.com/upgradeas7 to upgrade your license.�
How can this happen because I am using the same machine where Application/Administrative Servers are running to get connected to Web-Based Administrative Console.

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Directory server - administration console, system server console fail

The server is solaris 10, with the java 1.4, and the Sun One directory server 5.2 was installed from a compressed file
System Administration Server
System Administration Console
Sun Java(TM) System Server Console
All were installed, but there's no connection to the Administration Console on port 390. Isw there any documentation available that will help to troubleshoot this? Any recommendations as to how to resolve the difficulty?

I usually get to the admin console by running /var/opt/mps/serverroot/startconsole.
Its an X application so you will need to have $DISPLAY set.

SCOM 2007 - SharePoint 2007: Maximum connections counter

Hello,
I am trying to locate the "Maximum connections counter" for SharePoint 2007 using SCOM 2007. I don't see it so far!!!
"Web Service - Maximum Connections" does not show anywhere any idea?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

The object is Web Service, which then has several different counters, which then might have several instances.
If this performance object is something you want to monitor for, and it is not included in the mp, then you just need to create a performance monitor or collection rule, depending on what you want to do with the data.
The Exchange 2013 MP, for example, has no performance collection rules. So it's very possible, while the product group wanted to include everything most people need, they could have forgotten or were just not able to do so before they had to release
the mp. The MOSS 2007 MP has been around for years, was never updated, and isn't one of the better mps from MSFT. So if you want to extend it with a custom management pack, or just add something via the console, then you should be fine.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

WSUS Administration console for Server 2012R2

hey folks
we are using WSUS on a Server2012R2 installation in our company. all is working fine.
when we install patches, everyone would like to access to the administration-console to check the server-status.
with our old wsus-server (3.2 on a server 2003-OS) we had easily installed the administration console only on our management-Server (server 2008R2). everyone had access and was happy...
can anyone tell me the "right" way, to install the wsus 2012r2 administration-console only on a server 2008R2? i did not found any technet-solutions on this. the only workaround i found, was to install the old 3.2 administration-console and then
connect to our new wsus-server... seems to work. but this should be also possible with the new administration-UI based on wsus2012r2?

Hi,
as most managment gui's, this is part of RSAT (Remote server administration tools)
On windows 2012 features\remote serrver administration tools\role admnistration tools\Windows server Update services Tools. Note rsat for windows 2012 cannot be installed on windows 7 or earlier.
This is one of the reasons why you, in my opinion, should make sure to have a management server for each os you are administering.
MCP/MCSA/MCTS/MCITP

Login to Administration Console just hangs

Hi, I have just installed the Administration Console on my PC (Windows XP SP2, MS Office 2007). I have also installed the Microsoft.ACE.OLEDB.12.0 provider as per SAP's instructions, on my client PC.
When I access oSoft and click on any Admin Console task (e.g. Manage Application Sets) I can go through the connection wizard and successfully specify my credentials.
When, however, I click on "OK" to see the console, the popup simply hangs and nothing else happens.
Has anyone else experieinced the same problem?
TC

I have not experienced this result after an install of the Admin client. So, I would do a couple of things even though they may sound redundant. I would uninstall the admin client from your PC. Then going back through the web log-in, where the path is SERVER\OSOFT, start at the Cleint Software Center and verify that your PC has the required components prepared for the install. If it does, re-install the client. Then re-test your connection and login.
If that still doesn't work, I would search SAPSUPPORT Notes to see if any past "like" issues have been reported. From there, a call to SAP Support may be required. What version are you installing?
Hope this helps.

FMSI3.5 Administration Console/webserver unavailable

I have a problem with our FMSI3.5. A few times now we have experienced problems with the administration console/fms webserver. They become unavailable. When someone tries to connect to the administration console or tries to download a file from the FMS webroot the connection fails (times out). Streaming still works when that happens.
A FMS restart fixes the problem. Logs say something but can't really see what is wrong.
admin.01.log:
#Date: 2011-03-24
#Fields: date time    x-pid x-status        x-ctx x-comment
2011-03-24      05:30:44        25127 (i)2581173      Host: nic-flv01 IPv4: 127.0.1.1 -
2011-03-24      05:30:44        25127 (i)2571011      Server starting...      -
2011-03-24      05:30:44        25127 (i)2631174      Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4 -
2011-03-24      05:30:45        25127 (i)2631174      Listener started ( FCSAdminAdaptor ) : 1111/v4 -
2011-03-24      05:30:46        25127 (i)2571111      Server started (./conf/Server.xml).    -
2011-03-24      05:30:46        25127 (i)2581241      Connection to admin received. -
2011-03-24      05:30:46        25127 (i)2581243      Connection from core 24628 received.    -
2011-03-24      05:30:47        25127 (i)2581241      Connection to admin received. -
2011-03-24      05:30:47        25127 (i)2581241      Connection to admin received. -
2011-03-24      05:30:47        25127 (i)2581243      Connection from core 24627 received.    -
2011-03-24      05:30:47        25127 (i)2581243      Connection from core 24629 received.    -
2011-03-24      05:30:47        25127 (i)2581244      Connection from core 24627 accepted.    -
2011-03-24      05:30:47        25127 (i)2581244      Connection from core 24629 accepted.    -
2011-03-24      05:30:47        25127 (i)2581244      Connection from core 24628 accepted.    -
2011-03-24      19:27:13        25127 (w)2671165      Failed login attempt from 94.213.188.118 at Thu Mar 24 19:27:13 2011. -
2011-03-24      19:27:15        25127 (w)2671165      Failed login attempt from 94.213.188.118 at Thu Mar 24 19:27:15 2011. -
2011-03-24      19:27:16        25127 (w)2671165      Failed login attempt from 94.213.188.118 at Thu Mar 24 19:27:16 2011. -
#End-Date: 2011-03-25 05:30:10
Other logs don't seem to say anything on the topic. I can post them if you like to see them.
Anyone have an idea what could be wrong? Thanks in advance!

I wasn't smart enough to save the log files. Now I am one day too late. The apache server (on 8134) running on the FMS server is still working when the FMS website becomes unavailable.
Have there been any other reports of this problem?

Esso-LM (Administrative Console)

Hi Experts!
I Have a problem with ESSO-LM Agent, isn´t loading applications of Repository (Active Directory)
In my version of ESSO-LM (11.1.1.5) I verified that when right-click in Global Agent Setting - > Import -> From Live HKLM (This option is disabled)
This affects anything?
And . . .
In the Administrative Console:
Global Agent Setting -> Live -> Synchronization->ADEXT (I Don´t have this option)
I Have Global Agent Setting -> Live -> Synchronization-> (AD symbol + IP address Server)
Synchronization: AD 192.168.201.3
-Data Storage Configuration
Connection information
User interface
Credential Sharing
My problems are related with this ?
Best Regards

I'm experiencing the same. ESSO Version is: "ESSO-LM Administrative Console Version 11.1.120 (Build 2010.10.28)"
I can't provide user credentials. What could be wrong?

Is there a risk of setting a console connection timeout and what is the recommended setting?

Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

Hi Henrik
depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
it realy depends how secure is your space and how much security you need.
and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
HTH
Patrick

How do I get folders and their content to show up in the "Administrative Console"?

We have added a few sub folders under the “webroot” folder. I did this so I could make a custom web page that generates the code need to display the video in a web page if it is one of the folders.
My question is how do I get these folders and their content to show up in the “Administrative Console”?
Also how do I get the videos to be logged?
I have looked through the Server.xml and Application.xml files and the fms.ini but do not see any place, Am I not looking for the correct setting?
Attached is a pic of the folders.
Thanks
Chip

If Apache and MS do not talk to each other then where or should I be making these folders, some other location?
Maybe under the vod folder under applications?
Where in the “Flash Media Server” pdf would this be talked about?
Would I edit the Application xml file?
I am so new it hurts!
Thank you,
Chip

Administration Console Connection Count

Similar Messages

Maybe you are looking for