Administration Console for IDS 5.1

How can I manage more than one Server from a single Administration Console ?
I have two hosts on which I installed Directory and Administration Server (IDS 5.1 SP1 on Solaris 8):
no replicas involved, one server is for test and development, the other one is for production.
Reading docs, it seems to be possible to administer both specifing
"FirstSrv.<domain>: port SecondSrv.<domain>:port"
in the Console interface in the field "User Directory and port" but it doesn't work.
I configure both the installation in the same way (admin user, same domain name, etc.)
Is there some other configuration to specify ?
Thanks,
Marina

The servers have to share the configuration directory in order to be accessible through the console at the same time. If you create a new configuration directory with each installation they cannot be administered together. The console talks to an administration server which works off one configuration directory.
If you want to use them together then they should also use the same domain name.

Similar Messages

WSUS Administration console for Server 2012R2

hey folks
we are using WSUS on a Server2012R2 installation in our company. all is working fine.
when we install patches, everyone would like to access to the administration-console to check the server-status.
with our old wsus-server (3.2 on a server 2003-OS) we had easily installed the administration console only on our management-Server (server 2008R2). everyone had access and was happy...
can anyone tell me the "right" way, to install the wsus 2012r2 administration-console only on a server 2008R2? i did not found any technet-solutions on this. the only workaround i found, was to install the old 3.2 administration-console and then
connect to our new wsus-server... seems to work. but this should be also possible with the new administration-UI based on wsus2012r2?

Hi,
as most managment gui's, this is part of RSAT (Remote server administration tools)
On windows 2012 features\remote serrver administration tools\role admnistration tools\Windows server Update services Tools. Note rsat for windows 2012 cannot be installed on windows 7 or earlier.
This is one of the reasons why you, in my opinion, should make sure to have a management server for each os you are administering.
MCP/MCSA/MCTS/MCITP

What are the best configuration settings within the weblogic administration console for performance?

Hello,
Does anyone know of a good tutorial for setting the best configurations within the adminstrative console for weblogic servers?
Thanks,
Al

Hi,
Please refer the below links,
http://middlewaremagic.com/weblogic/?p=6384
http://docs.oracle.com/cd/E13222_01/wls/docs100/perform/topten.html
Regard,
Ramprakash Arun
Industry Vertical
Please Mark Helpful / Correct Answer if so

Web Logic Server Administration Console

Hi All,
I loged into Admin Console of Oracle Web Logic Server Administration Console
For DeployingP6WebServices::
Created aWebLogicdomain for the WebServices application.
DeployingP6WebServicesintotheWebLogicdomain. giving an error:
In Deployments Tab which is left corner:Deployed a WAR File but while starting all rquests its giving me the java error
javax.servlet.ServletException: [HTTP:101249]
[weblogic.servlet.internal.WebAppServletContext@d025b9 - appName: 'p6ws', name: 'p6ws.war', context-path: '/p6ws', spec-version: 'null']:
Servlet class org.apache.cxf.transport.servlet.CXFServlet for servlet cxf could not be loaded
because the requested class was not found in the classpath .
java.lang.ClassNotFoundException: org.apache.cxf.transport.servlet.CXFServlet.
Please help me its urgent

check in the documentation http://www.oracle.com/technetwork/indexes/documentation/index.html , select your primavera version, and check document called: tested_configuration, check if you are using the right weblogic and jdk version for your primavera p6 version.

Collaboration Administration Console Access Error

Hi,
I have installed and configured webcenter collaboration but I am getting below error when I am trying to access Administration Console for Collaboration. I tried two times and get the same error.
com/plumtree/core/db/DBManager
          com.plumtree.collaboration.api.portalaccess.PortalAccessManager.getGuestPortals(PortalAccessManager.java:287)
          com.plumtree.collaboration.api.portalaccess.PortalAccessManager.fillMap(PortalAccessManager.java:396)
          com.plumtree.collaboration.api.portalaccess.PortalAccessManager.initialize(PortalAccessManager.java:323)
          com.plumtree.collaboration.api.portalaccess.PortalAccessManager.<clinit>(PortalAccessManager.java:55)
          com.plumtree.collaboration.context.CollaborationContextFactory.createCollaborationContext(CollaborationContextFactory.java:72)
          com.plumtree.collaboration.webui.framework.action.CollaborationController.service(CollaborationController.java:90)
          javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
          org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
          org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
          org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
          org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
          org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
          org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
          org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
          org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
          org.apache.coyote.http11.Http11NioProcessor.process(Http11NioProcessor.java:887)
          org.apache.coyote.http11.Http11NioProtocol412Http11ConnectionHandler.process(Http11NioProtocol.java:696)
          org.apache.tomcat.util.net.NioEndpoint412SocketProcessor.run(NioEndpoint.java:2009)
          java.util.concurrent.ThreadPoolExecutor412Worker.runTask(ThreadPoolExecutor.java:650)
          java.util.concurrent.ThreadPoolExecutor412Worker.run(ThreadPoolExecutor.java:675)
          java.lang.Thread.run(Thread.java:595)
also collaboration diaognostic URL giving me no details on the screen.
Does anyone have clue ?
- Mukesh

You might want to check that you ran all of the database scripts for Collaboration. Some scripts must be run as the collabdbuser and the others must be run as portaldbuser. It might be possible that the portal can't access the Collaboration database or vice versa.

Unable to bring up Administration Console

Hi,
I created two standalone servers one in production mode and the other in development
mode. Both are listening in two different ports. I was able to start them both
in the background without any issues. I tried to access the administration console
for domain 1 (production mode) by typing the URL: http://<host name>:<portname1>/console
and it came up fine. But when I try to bring up the admin console for domain 2
(development mode) by typing the URL: http://<host name>:<port name2>/console
it keeps saying page cannot be displayed. I am not able to find any error/info
in the server log files. Am I doing anything wrong in basics here ? Please help.
I am running WLS 7.0 SP2 on HP-UX 11
Thanks,
Gugga

Hi,
I figured what the problem is. It is on the Hardware side for the port I was try
to accessing was not configured to accept requests. Please ignore my earlier questions.
Thanks,
Gugga
"Gugga" <[email protected]> wrote:
>
I am using the same trial license file for both the domains. Can this
be an issue
? Please help.
Gugga
"Gugga" <[email protected]> wrote:
Hi,
I created two standalone servers one in production mode and the other
in development
mode. Both are listening in two different ports. I was able to start
them both
in the background without any issues. I tried to access the administration
console
for domain 1 (production mode) by typing the URL: http://<host name>:<portname1>/console
and it came up fine. But when I try to bring up the admin console for
domain 2
(development mode) by typing the URL: http://<host name>:<port name2>/console
it keeps saying page cannot be displayed. I am not able to find anyerror/info
in the server log files. Am I doing anything wrong in basics here ?Please
help.
I am running WLS 7.0 SP2 on HP-UX 11
Thanks,
Gugga

Forgot administrator console password

I have not logon to the administrator console for a year. Now I forget wkat I need to do to get it back.

Hello Lyondell,
Thank you for your post. For ColdFusion 9, here are the steps:-
1. Make a backup copy of CF_HOME\lib\neo-security.xml file.
In case of multi-server editions, the path is: C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfusion\lib\neo-security.xml
2. Open the neo-security.xml file in a text editor and change 'true' to 'false' for the admin.security.enabled variable tag. For example, search the file for "admin.security.enabled" and change the entry as follows:
<var name='admin.security.enabled'><boolean value='false'/></var>
3. Restart the ColdFusion application server.
You should now be able to bypass the login to the ColdFusion administrator. You can reset the password by choosing Security>Administrator.
1. Expand Security and select CF Admin Password.
2. Check Use a ColdFusion Administration password.
3. Enter the new password and click Submit Changes
For ColdFusion 10, please run the passwordreset.bat at the following location cf_root\cfusion\bin\ file and follow the onscreen instructions.
Regards,
Anit Kumar

Question on Location for SharePoint 2010 Central Administration Console

I am a SQL Server Database Administrator and I am new to SharePoint 2010. I have been asked to find out what the best practice is for the SharePoint 2010 Central Administration console. Should it be on the application server or should it be
on it's own server?
lcerni

Hi Icerni,
As Scott suggested, by default, the server that hosts Central Administration in a three-tier farm is an application server.
You might be interested in server role:
http://blogs.technet.com/b/wbaer/archive/2009/12/06/configuring-the-web-and-application-server-roles-for-microsoft-sharepoint-server-and-foundation-2010.aspx
http://technet.microsoft.com/en-us/library/cc261752(v=office.15).aspx
In addition, here is a list of articles for best practice in SharePoint 2010:
http://technet.microsoft.com/en-us/library/cc850682(v=office.14).aspx
Regards,
Rebecca Tu
TechNet Community Support

Document for customizing administration console in Realm mode

I want is to have the sample NewTab from AM's samples working in both Legacy model and Realm mode. The chapter 11 Customizing the Administration Console on the AM 7.1 Developer's Guide (http://docs.sun.com/app/docs/doc/819-4675/aduci?l=en&q=access+manager+7.1&a=view) is for the Legacy mode. Where do I find the one for the Realm mode? The Readme.html in the sample is for the Legacy model and parts of its information is outdated.
Regards,
Rice

I want is to have the sample NewTab from AM's samples working in both Legacy model and Realm mode. The chapter 11 Customizing the Administration Console on the AM 7.1 Developer's Guide (http://docs.sun.com/app/docs/doc/819-4675/aduci?l=en&q=access+manager+7.1&a=view) is for the Legacy mode. Where do I find the one for the Realm mode? The Readme.html in the sample is for the Legacy model and parts of its information is outdated.
Regards,
Rice

Does OC4J have any web console for an administrator?

Does OC4J have any web console for an administrator?
If it does, on which URL is it?

For versions earlier than 9.0.4, we do not have a console for OC4J standalone.
What version you are using ? For 10.0.3 Developer preview we have one for developers, try http://hostname:8888/adminoc4j/
Our production release will have a nice management console.
-Debu

How do I get folders and their content to show up in the "Administrative Console"?

We have added a few sub folders under the “webroot” folder. I did this so I could make a custom web page that generates the code need to display the video in a web page if it is one of the folders.
My question is how do I get these folders and their content to show up in the “Administrative Console”?
Also how do I get the videos to be logged?
I have looked through the Server.xml and Application.xml files and the fms.ini but do not see any place, Am I not looking for the correct setting?
Attached is a pic of the folders.
Thanks
Chip

If Apache and MS do not talk to each other then where or should I be making these folders, some other location?
Maybe under the vod folder under applications?
Where in the “Flash Media Server” pdf would this be talked about?
Would I edit the Application xml file?
I am so new it hurts!
Thank you,
Chip

Not able to access the Administrator Console 7001

Dear all,
We have installed weblogic server 11.1.2 in Aix 6.1.
Installation faced lot of FIXER problems finally we fixed all the required fixers and installation and configuration compleated without any error.
In the last page of Configuration summary we got the Admin consloe and Em console address.
When i try to connect those from my system using IE it says "internet explorer cannot Display the webpage" error comes.
While on Installation we used Humming bird for graphical installation[this is the first time am using this utlity]. And more over i do not have idea how to check about the admin server start and stop from the back end[AIX].
Kindly help me how to access the Administrator Console after Installation
"Administrator Console: http://emar:7001/console"
Exepecting all expects advice and guidance.
Regards,
Paja

Hi Paja,
Please check any weblogic process are running by using.
ps -ef | grep java
use " *kill -9 < pid >* "
Now under %Domain_Home%/ bin folder.
you will find startWebLogic.sh file.
start this one using following way.
./startWebLogic.sh
Once you provide your username and password
Check your last logging like this.
*<Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.17.62.212:7001 for protocols iiop, t3, ldap, s*
in this case 10.17.62.212 is my IP address or listen address and 7001 is my http port.
if you enable SSL list port it will also show you that one.
now try to access console using http://<IP address>:port/console
provide username and password
Here we go to start your weblogic server.
Now in %Domain_Home%/ bin folder you will find one more .sh file says stopWebLogic.sh.
this will help you to stop the server.
Hope this is easy way to start and stop your server.
Regards,
kal

Issue with web access in view administrator console after connection server 5.5 installation.

Hi All,
I am trying to bring up my setup with ESXi 5.5 and vcenter 5.5 U2. I made a DNS server and made two 2008 R2 machines and launched vcentre and connection manager on them.
After installing connection server 5.5, I am unable to open the web UI by clicking "view administrator console" icon on my desktop! I installed proper certificated and iis module too and confirmed that my https certificate is properly working. (snapshot attached, filename - snapshot_view_webpage.jpeg)
I google for the possible error and tried below mentioned links but none of them worked.
1.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004759
Corrected this error but still system is in same shape and i am unable to get the console's admin webpage.
2.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2001277
In this method, my admin folder didn't got recreated as the service restart got stuck for a long time and throws error that service restart got time out!!(snapshot attached)
Can some one please help me to move forward. Please let me know if you need more information from my end.
Thanks,
Jeevan

Since the policy AKS is top in sequence under service selection rule so it should hit for sure. As you wrote that even after disabling the default device admin, then also request is hitting the same and restarting the ACS services resolved the issue. The symptoms of your issue are exactly same as stated in this defect.
CSCuo93378    Certain browsers cause ACS database corruption
Due to this issue we have seen cases where request hits the disable and default policies without any reason. Actually accessing ACS via chrome mess around with all the operators in conditions.
The only workaround is to access all the rules and conditions in supported browser. Ensure all the operators are correct, save the changes and restart the ACS services.
The issue seems to be fixed in ACS 5.5 patch 5
Regards,
Jatin

The administration console doesn't refresh

Hello,
I used WebCenter Portal Administration Console (http://<server>:<port>/<context_root>/admin to delete a page at runtime.
Then I added new pages in the page hierarchy in my portal application, which I would like to see in the admin console too, but it seems they don't show up
I mention that the admin console looks fine on my integrated environment but on the managed server it doesn't refresh.
How the admin console should be refreshed to reflect the latest changes?
Thanks,
Constantin

Yes, your understanding is correct. I added the pages in the pages folder in JDeveloper (11.1.1.4) and then added them to the page hierarchy.
Here is the pages.xml content
<?xml version="1.0" encoding="UTF-8" ?>
<pagesDef xmlns="http://xmlns.oracle.com/webcenter/page"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/webcenter/page/pagesDef.xsd">
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/home.jspx"
hidden="false" shared="false" hasSubPages="false" id="home"
overridePolicy="true"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/ipc.jspx"
hidden="true" shared="false" hasSubPages="false" id="ipc"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/google.jspx"
hidden="true" shared="false" hasSubPages="false" id="google"
overridePolicy="true"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/services.jspx"
hidden="true" shared="false" hasSubPages="false" id="services"/>
</pagesDef>
I can see all the pages in the IWLS admin but in WLS admin I can see only the "home" page.
Previously I deleted "ipc", "google" and "services" from WLS admin and I cannot see them again after a new deployment.
I can add new pages in WLS admin without any problem.
For IWLS, although I deleted the same pages in admin console, after a new deployment all the pages are shown.
I guess it is the setting "delete customization before each run" in JDeveloper which allows the refresh of the IWLS admin console too.
The question is what is the equivalant for WLS? Do I need to "clean" the customization?
Thanks,
Constantin

Can't see Stream Files in administration console !!

I have created a new Directory called "mydir" into the
Application Directory Of Flash Media Server.
I copied my "mydir.flv" file into ths directory.
But :
Problem 1 : I can't see this file in the Stream Section of
the Administration Console.
Problem 2 : I can't access the adress :
rtmp://localhot/mydir/mydir.flv
Please, help me since I must have forgoten some essential
steps in my Server Installation process.
Thanks

The reason you can't see the streams is because they only
show up when they are being accessed (played) which is probably the
dumbest thing ever. Anyhow, as for the URL not working, not exactly
sure why, but I know this is dumb, you have a typo: rtmp://localho
St/mydir/mydir.flv

Administration Console for IDS 5.1

Similar Messages

Maybe you are looking for