Administration Console

Hi there,
I have one problem with the administration console,When i get up the gui from my browser and try to see from the folder Machines ----> nodoGA/mxppga ---> Clients
( nodoGA /mxppga : Master machine / Domain )
My gui hang up and tell me that was an error and the gui disapper these thing only it produce when i selected these folder..with others its work fine
I hope someone can help me
Regards !!!

You should probably contact Support so that they can look at the error messages
you are seeing. They will also need to know which release and patchlevel you have,
and the machine type.
Scott Orshan
Julio Cesar Cruz Mejia wrote:
Hi there,
I have one problem with the administration console,When i get up the gui from my browser and try to see from the folder Machines ----> nodoGA/mxppga ---> Clients
( nodoGA /mxppga : Master machine / Domain )
My gui hang up and tell me that was an error and the gui disapper these thing only it produce when i selected these folder..with others its work fine
I hope someone can help me
Regards !!!

Similar Messages

How do I get folders and their content to show up in the "Administrative Console"?

We have added a few sub folders under the “webroot” folder. I did this so I could make a custom web page that generates the code need to display the video in a web page if it is one of the folders.
My question is how do I get these folders and their content to show up in the “Administrative Console”?
Also how do I get the videos to be logged?
I have looked through the Server.xml and Application.xml files and the fms.ini but do not see any place, Am I not looking for the correct setting?
Attached is a pic of the folders.
Thanks
Chip

If Apache and MS do not talk to each other then where or should I be making these folders, some other location?
Maybe under the vod folder under applications?
Where in the “Flash Media Server” pdf would this be talked about?
Would I edit the Application xml file?
I am so new it hurts!
Thank you,
Chip

Not able to access the Administrator Console 7001

Dear all,
We have installed weblogic server 11.1.2 in Aix 6.1.
Installation faced lot of FIXER problems finally we fixed all the required fixers and installation and configuration compleated without any error.
In the last page of Configuration summary we got the Admin consloe and Em console address.
When i try to connect those from my system using IE it says "internet explorer cannot Display the webpage" error comes.
While on Installation we used Humming bird for graphical installation[this is the first time am using this utlity]. And more over i do not have idea how to check about the admin server start and stop from the back end[AIX].
Kindly help me how to access the Administrator Console after Installation
"Administrator Console: http://emar:7001/console"
Exepecting all expects advice and guidance.
Regards,
Paja

Hi Paja,
Please check any weblogic process are running by using.
ps -ef | grep java
use " *kill -9 < pid >* "
Now under %Domain_Home%/ bin folder.
you will find startWebLogic.sh file.
start this one using following way.
./startWebLogic.sh
Once you provide your username and password
Check your last logging like this.
*<Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.17.62.212:7001 for protocols iiop, t3, ldap, s*
in this case 10.17.62.212 is my IP address or listen address and 7001 is my http port.
if you enable SSL list port it will also show you that one.
now try to access console using http://<IP address>:port/console
provide username and password
Here we go to start your weblogic server.
Now in %Domain_Home%/ bin folder you will find one more .sh file says stopWebLogic.sh.
this will help you to stop the server.
Hope this is easy way to start and stop your server.
Regards,
kal

Issue with web access in view administrator console after connection server 5.5 installation.

Hi All,
I am trying to bring up my setup with ESXi 5.5 and vcenter 5.5 U2. I made a DNS server and made two 2008 R2 machines and launched vcentre and connection manager on them.
After installing connection server 5.5, I am unable to open the web UI by clicking "view administrator console" icon on my desktop! I installed proper certificated and iis module too and confirmed that my https certificate is properly working. (snapshot attached, filename - snapshot_view_webpage.jpeg)
I google for the possible error and tried below mentioned links but none of them worked.
1.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004759
Corrected this error but still system is in same shape and i am unable to get the console's admin webpage.
2.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2001277
In this method, my admin folder didn't got recreated as the service restart got stuck for a long time and throws error that service restart got time out!!(snapshot attached)
Can some one please help me to move forward. Please let me know if you need more information from my end.
Thanks,
Jeevan

Since the policy AKS is top in sequence under service selection rule so it should hit for sure. As you wrote that even after disabling the default device admin, then also request is hitting the same and restarting the ACS services resolved the issue. The symptoms of your issue are exactly same as stated in this defect.
CSCuo93378    Certain browsers cause ACS database corruption
Due to this issue we have seen cases where request hits the disable and default policies without any reason. Actually accessing ACS via chrome mess around with all the operators in conditions.
The only workaround is to access all the rules and conditions in supported browser. Ensure all the operators are correct, save the changes and restart the ACS services.
The issue seems to be fixed in ACS 5.5 patch 5
Regards,
Jatin

The administration console doesn't refresh

Hello,
I used WebCenter Portal Administration Console (http://<server>:<port>/<context_root>/admin to delete a page at runtime.
Then I added new pages in the page hierarchy in my portal application, which I would like to see in the admin console too, but it seems they don't show up
I mention that the admin console looks fine on my integrated environment but on the managed server it doesn't refresh.
How the admin console should be refreshed to reflect the latest changes?
Thanks,
Constantin

Yes, your understanding is correct. I added the pages in the pages folder in JDeveloper (11.1.1.4) and then added them to the page hierarchy.
Here is the pages.xml content
<?xml version="1.0" encoding="UTF-8" ?>
<pagesDef xmlns="http://xmlns.oracle.com/webcenter/page"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/webcenter/page/pagesDef.xsd">
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/home.jspx"
hidden="false" shared="false" hasSubPages="false" id="home"
overridePolicy="true"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/ipc.jspx"
hidden="true" shared="false" hasSubPages="false" id="ipc"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/google.jspx"
hidden="true" shared="false" hasSubPages="false" id="google"
overridePolicy="true"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/services.jspx"
hidden="true" shared="false" hasSubPages="false" id="services"/>
</pagesDef>
I can see all the pages in the IWLS admin but in WLS admin I can see only the "home" page.
Previously I deleted "ipc", "google" and "services" from WLS admin and I cannot see them again after a new deployment.
I can add new pages in WLS admin without any problem.
For IWLS, although I deleted the same pages in admin console, after a new deployment all the pages are shown.
I guess it is the setting "delete customization before each run" in JDeveloper which allows the refresh of the IWLS admin console too.
The question is what is the equivalant for WLS? Do I need to "clean" the customization?
Thanks,
Constantin

Web Logic Server Administration Console

Hi All,
I loged into Admin Console of Oracle Web Logic Server Administration Console
For DeployingP6WebServices::
Created aWebLogicdomain for the WebServices application.
DeployingP6WebServicesintotheWebLogicdomain. giving an error:
In Deployments Tab which is left corner:Deployed a WAR File but while starting all rquests its giving me the java error
javax.servlet.ServletException: [HTTP:101249]
[weblogic.servlet.internal.WebAppServletContext@d025b9 - appName: 'p6ws', name: 'p6ws.war', context-path: '/p6ws', spec-version: 'null']:
Servlet class org.apache.cxf.transport.servlet.CXFServlet for servlet cxf could not be loaded
because the requested class was not found in the classpath .
java.lang.ClassNotFoundException: org.apache.cxf.transport.servlet.CXFServlet.
Please help me its urgent

check in the documentation http://www.oracle.com/technetwork/indexes/documentation/index.html , select your primavera version, and check document called: tested_configuration, check if you are using the right weblogic and jdk version for your primavera p6 version.

Can't see Stream Files in administration console !!

I have created a new Directory called "mydir" into the
Application Directory Of Flash Media Server.
I copied my "mydir.flv" file into ths directory.
But :
Problem 1 : I can't see this file in the Stream Section of
the Administration Console.
Problem 2 : I can't access the adress :
rtmp://localhot/mydir/mydir.flv
Please, help me since I must have forgoten some essential
steps in my Server Installation process.
Thanks

The reason you can't see the streams is because they only
show up when they are being accessed (played) which is probably the
dumbest thing ever. Anyhow, as for the URL not working, not exactly
sure why, but I know this is dumb, you have a typo: rtmp://localho
St/mydir/mydir.flv

Weblogic Server Administration Console does not open

hi,
I am using EM Grid Control and Weblogic Server is added in the Middleware Targets...when I click on "Weblogic Server Administration Console" to open the Admin Server console it directs me to old IP address in the browser and console does not open...it goes on old IP address...
it gets open when I put the Ip address myself in the browser like:
https://10.254.166.141:7102/conole
it gets open there...means that server is okay and working properly...
I have seen the logs and it is giving the following message:
<<anonymous>><BEA-220103> <Async web service support is not fully configured. The async response web
service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not
defined/deployed:
any help will be appreciated...
thanx
Edited by: user13672598 on May 23, 2011 4:55 AM

Hi,
Can you check the EM configuration whenther it has updated the changes made by you i.e. the ip address.
Can you try rebooting the EM application,as this seems to be that the EM has not the changes reflected to it's configuration.
Hope this helps
Regards,
Rohit Jaiswal

Two Administrator Consoles - problem with logging

Hi Everybody,
This is my first post on this really great board, so first of all I would like say HELLO.
Now, my problem is.
I have got two Administrator Consoles on one machine to manage two domains.
When I logging to one Admin Console using web browser, logs me out of the other one.
I use the same name and password for both consoles.
Please help me understand what I doing wrong.
Thank You,
Paul

Hi Paul,
Welcome to OTN forums your views and ideas are really appreciated here.
Coming to you problem.
As you mentioned that you have two different domain running on same Machine but you cannot access both Admin console at one time because of having same port number on both port.
Weblogic Admin Server comes with default called 7001.
Now Try to change the Admin Server port to different one eg: 7003 and then you can start both the Admin console at a time.
Still you have issue please let me know.
Happy to help you :).
Regards,
Kal

BizTalk Administration Console problem after installing IBM iSeries Access

Hi,
We have a Biztalk Server 2010 environment on Windows Server 2008 R2 with SQL server on separate machine.
After installing IBM iSeries Access we get errors in Biztalk Administration Console, especially the Host Instance and Adapter information cannot be loaded.
Except for the errors in Adminsitration Console, the Biztalk installation seems to be working fine, so the integration processes doesn't seem to be affected.
We get the following error:
BizTalk Server cannot access SQL server. This could be due to one of the following reasons:
1. Access permissions have been denied to the current user. Either log on as a user that has been granted permissions to SQL and try again, or grant the current user permission to access SQL Server.
2. The SQL Server does not exist or an invalid database name has been specified. Check the name entered for the SQL Server and database to make sure they are correct as provided during SQL Server installation.
3. The SQL Server exists, but is not currently running. Use the Windows Service Control Manager or SQL Enterprise Manager to start SQL Server, and try again.
4. A SQL database file with the same name as the specified database already exists in the Microsoft SQL Server data folder.
Internal error from OLEDB provider: "The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception." (WinMgmt)
I tried to uninstall the IBM iSeries Access, but the problem remains.
This issue is related to this post
http://social.technet.microsoft.com/Forums/en-US/6f371f45-813c-48d8-80e3-bd94e00bf5dd
But this post seem to miss a solution.
Thanks fo your help with this!
BR
Samuel
SamueL J

Hi and thanks for your help!
The machine.config did it :)
According to this link there is a known issue with the IBM iSeries Access installation which removes the proper permissions from the machine.config and therefore Biztalk Administration Console stops working correctly.
http://www-01.ibm.com/support/docview.wss?uid=nas284158c400658982b86257611003c6d21
BR
Samuel
SamueL J

Changing SSL Cert of GroupWise Administration Console

Hello Novell-forum,
is there any posibility to change the ssl-certificate of groupwise 2014's administration console?
I searched in documentation and internet but can't find anything about that.
Michael

As far as i can see and test on Groupwise 2014 14.0.1 HP1, if you want to replace the self signed certifcate for the admin console, juste save and replace the file:
/opt/novell/groupwise/certificates/<longhash>/admin.<domain>.crt with the wilcard certificate for your site.
Francois
Originally Posted by mblackham
It may be on the radar for future releases. It is not scheduled for the next release however..
--Morris
>>> sulatna<[email protected]> 11/19/2014 3:06 AM >>>
Thank you for your answers.
laurabuckley
No - thats unfortunately not the correct option I searched for.
mblackham
I think you understood what I want to do. (use official wildcart
certificate for admin-console)
Will this be possible in any future version of GroupWise? Perhaps like
it is done great in filr-appliance?
Michael
sulatna
sulatna's Profile: https://forums.novell.com/member.php?userid=2662
View this thread: https://forums.novell.com/showthread.php?t=480489

Viewing an MBean on the administration console

I have registered an MBean on a WebLogic 6.0 server. Now I need to know how
to view this MBean and run the methods
of the class represented by this MBean possibly from the Administration
Console. I want some way to run the methods as
I could on the HtmlAdaptorServer for the SUN JMX Reference Implementation.
Thank you.
T. Pei

When do you think we will have it? We really want this done (for run-time
configuration, changing variables, etc.).
news:3a7f3758$[email protected]..
Admin console in WLS 6.0 does not support automatic extensibility for user
MBeans registered to WLS server. You can only access them programmatically
by getting the MBean from the MBeanServer in the WLS server.
This functionality is being considered for future releases.
news:[email protected]..
I have registered an MBean on a WebLogic 6.0 server. Now I need to knowhow
to view this MBean and run the methods
of the class represented by this MBean possibly from the Administration
Console. I want some way to run the methods as
I could on the HtmlAdaptorServer for the SUN JMX ReferenceImplementation.

Not be able to login in Administration Console....

Hey everyone i am not be able to login in my Administration Console, First of all i thought that i have forgot my password so i have reinstalled Adobe Flash Media Server 4.5 but that problem is still there. What to do?
RP

Can you check if your Admin server is running? On windows you can check using Services Panel and on Linux you can check using "ps" commands

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Question on Location for SharePoint 2010 Central Administration Console

I am a SQL Server Database Administrator and I am new to SharePoint 2010. I have been asked to find out what the best practice is for the SharePoint 2010 Central Administration console. Should it be on the application server or should it be
on it's own server?
lcerni

Hi Icerni,
As Scott suggested, by default, the server that hosts Central Administration in a three-tier farm is an application server.
You might be interested in server role:
http://blogs.technet.com/b/wbaer/archive/2009/12/06/configuring-the-web-and-application-server-roles-for-microsoft-sharepoint-server-and-foundation-2010.aspx
http://technet.microsoft.com/en-us/library/cc261752(v=office.15).aspx
In addition, here is a list of articles for best practice in SharePoint 2010:
http://technet.microsoft.com/en-us/library/cc850682(v=office.14).aspx
Regards,
Rebecca Tu
TechNet Community Support

Administration Console Extension problem with 8.1.5 upgrade

I have a module of code that is an extension of the Administration Console. When I deploy the .ear file, I can see a yellow folder/node displayed in the Weblogic (8.1.3) console.
This has been working for a couple of years until we recently upgraded to Weblogic 8.1.5 server. Even though the server log says that .ear file has been deployed successfully, the yellow folder/node does not appear in the Weblogic console.
Any one know what may caused this problem?
Thank you!

From $ORACLE_HOME/bin enter the
following:
$ORACLE_HOME/bin/oerr ORA 01034 This will give you more info on your
problem.

Administration Console

Similar Messages

Maybe you are looking for