Administration Guidelines and Recommendations

Are there guidelines or recommendations as to how one should structure the administration of Windows Azure services aside from what I'm finding here? -- http://msdn.microsoft.com/en-us/library/azure/hh531793.aspx  I need clarification on what happens
if I use all Organizational Accounts for Azure administration, as is suggested in the above link, and then my Azure-hosted ADFS farm craps out leaving none of my administrators able to authenticate to manage the Windows Azure account.  Should we be adding
a backup non-organizational Microsoft account as a Service Admin in order to protect against this possibility?

I suppose that's the question, isn't it?
If the authentication for all of our administrative accounts is handled by an ADFS farm hosted in Windows Azure, and
something happens to the ADFS farm that makes it unable to process logins, then conceivably none of my administrative accounts can log into Windows Azure to resolve the issue.  Should it be recommended that not all of the admin accounts be organizational
accounts (as defined by the link in my original post) and that an external Microsoft account should be added as a backup?  Am I missing something key here?  I'd rather not create an external Microsoft account with so much administrative clout if
I don't have to, but I don't really see another option.

Similar Messages

  • Failed cfg on Essbase /Essbase administration service and Essbase / Studio

    Hi Friends,
    I Installed Oracle Hyperion Foundaion services,esbase and planning.
    i deployed essbase in standalone mode.
    when i run EPM system Diagnostic I am geting failes status on
    Essbase /Essbase administration service and Essbase / Studio with the Test Description
    FAILED CFG: Configuration Check whether all configuration tasks have been completed
    Error: Next tasks are not configured:
    hubRegistration: Configuration Failed
    Recommended Action: Try to configure mentioned tasks
    is there any problem because of this?please suggest
    Regards
    DB

    Hi,
    Have you configured Essbase, Shared services and Planning component after installation; were it successful last time.
    Thanks
    Focusthread Hyperion Trainer
    [http://focusthread.com/training]

  • Final Cut Studio 2: Requirements and Recommendations

    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b

    SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b
    Message was edited by: Rinaldo

  • HT202860 Forgot administrator password and unable to download applications. I have my Apple ID but it won't work.

    I forgot my administrator password and I am unable to download applications now. In particular I am trying to download Adobe Reader at the moment but my Apple ID is not enough, it is requesting another password. Anybody can help? Thank you

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • I do not know my apple administrator username and password? How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username/password

    I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.

    iOS is only for mobile devices, so:
    Resetting or changing a password:
    For Snow Leopard or earlier:  http://support.apple.com/kb/HT1274
    For Lion or later:  http://support.apple.com/kb/HT6022
    For Mavericks users:
    http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
    If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
    If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
    https://discussions.apple.com/docs/DOC-4101

  • I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

  • I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
    So, the options are to upgrade to a newer OS X or use Firefox or  Chrome.
    Be aware, Apple no longer support Snow Leopard v10.6 >  www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
    See if your Mac can run v10.9 Mavericks >  OS X Mavericks: System Requirements
    If so, you can download and install Mavericks for free from the App Store.
    Read prior to upgrading >   Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

  • How do I disable administrator username and password entry to access ix4-300d

    With the recent version 4.1.102.29716 update, I am now FORCED to enter a username and password to get into my "home based" ix4-300d NAS.  This has already been a MAJOR pain for my nedia server setup, in that I am no longer able to create a network drive to one of several NAS folders on to my home network.
    My question therefore is, how do I DISABLE the function of having to enter an administrator username and password to gain entry into my ix4-300d?
    Thanks,
    Bill

    No hazzle, just do it.
    This is only for admin purposes. You are still able to place your media into individual user shares or put it in the public area where they will be accessible for everyone, even if you set 'security' on.
    Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
    Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
    I am not a Lenovo Employee.
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • How to find out who your administrator is and why I can't view certain things even on this web sight business account is what I have

    How do I find out who my administrator is and why I can't view certain things and get error 401 says i am an unauthorized user
    It is a small business which doesn't make sense why I shouldn't be able to access certain pages  on the Internet
    I believe my husband is the administrator actually
    Plus 404 and 403

    If you are referencing a specific web site, there is no way to determine who is set up as administrator. Contact the web site directly.
    Barry
    P.S. As a note, you already received an answer to your "401" question. Please do not rephrase a question and post it again. We are volunteers here and do not like to answer something that has already been addressed.
    Message was edited by: Barry Hemphill

  • So I rebooted my iMac to reset the administrator password and now all of my data is gone. How do I get everything back on my computer?

    So I forgot my administrator password and I rebooted my computer to reset it and now everything is gone. How do I get all of my data back? Thanks!

    Exactly how did you "reboot to reset"?
    Rebooting simply means shutting down the machine and turning it back on. That does not erase any data.

  • After a year of no use and a fully discharged battery, my MacBook Pro refuses to accept the administrator name and the password. How can I reset these?

    After a year of no use and a resulting fully discharged battery, the MacBook Pro refuses to recognize the administrator name and password (both). It has system OS X 10.6 which can not be upgraded without the information. How can I reset or reistall the administrator name and password?

    Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
    Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
    The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
    Even if I sold this Ipad and bought a new one, the system memory is still there.
    I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
    One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
    Thanks for your comments.
    RAZ

  • I'm trying to download an app that is not from the app store and it needs my administrations name and password

    I need help, I want to download the app called 'popcorn time' from online. I know it has no side effects because my friend has used this app for a number of years on her mac computer. I found it on the internet and have nearly downloaded it but my security system won't let me I followed the instructions to get the security system to make an exception for this app but at the end of the instructions it has a log-in pop up that says  "OS X is trying to allow an item to always run. Type an administrator's name and password to allow this." I don't know what it means by an administrators name and password I typed my apple ID but this didn't work. I checked if i had the right password and i did and i have tried it multiple times but it still doesn't work this is very frustrating and I need to fix it

    Answered in the other thread you posted in:
    i am trying to download new software and my mac keeps asking for the administrator name and password... i enter my apple…
    Please don't post in more than one place. It can lead to people wasting their time answering a question which has already been answered elsewhere.

  • Administration Node and non-default certificate

    Hello,
    We are running our administration server on one host, and we have multiple other hosts configured as administration nodes. We used our company CA to generate a server certificate for our administration server, and that appears to be working fine. We tried to do the same thing on our administration nodes, and something curious is happening.
    I used certutil -R to generate a CSR and private key. I then took the generated CSR, obtained a signed certificate from our company CA, then used certutil -A -t u,u,u to install it (and certutil -A -t CT,, to install the CA cert itself). Running certutil -L, I see that in addition to the default Admin-CA-Cert and Admin-Server-Cert our company CA cert and the newly signed cert show up. So far, so good.
    Next, I modified the server.xml to specify the server-cert-nickname as that assigned to my new cert.
    To put these changes into effect, I stop and start the admin server, but upon doing so, I see this message:
    warning: LCM0006: Lifecycle module [AdminLifecycleModule] threw ServerLifecycleException [com.sun.web.admin.exceptions.AdminException: ADMIN3668: Cannot start an unregistered node. Register with an administration server. ]
    OK, so I run wadm register-node to re-register the admin node (presumably it needs to tell the admin server about our new certificate) and then start the admin server again, and it starts. Problem is, the act of running wadm register-node has reset the server-cert-nickname back to the default (Admin-Server-Cert) and even more bizarre, has deleted both our local CA and my new certificate from the certificate & key database.
    How do I - or is it even possible to - run my admin nodes with certs signed by our company CA?
    Thanks,
    Bill

    Hi,
    Can u explain the problem elaborately
    Thanks,
    Raj_indts
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support"

  • Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected tha

    Can't load Netflix - Firefox says something about cookie problem and recommends try again button. ("The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. This problem can sometimes be caused by disabling or refusing to accept cookies.)" Hit the try again button repeated ly - nothing???

    I decided to give Netflix a call about this problem.
    On a recording while waiting for a support rep, it said if you're having problems logging in to go to:
    http://www.netflix.com/clearcookies
    It works for me. Now I have to logon everytime I go to their site though versus it had kept me already logged in before this problem.
    I will be using that link to get to their site until they get it fixed.

  • Administrator account and password problem

    I just got a new Macbook for Christmas I have been trying to install LimeWire onto my laptop and every time the Installer asks me to type in my administrator name and password. I've been putting in the username I used to set up my computer but its not working. Since I am the only person using this computer doesn't it make me the administrator? I have already tried putting in the Mac OS X Install disk and reseting the password for my account. I even went to System Preferences--Accounts and changes my password there but nothing has worked. *What am I doing wrong?* Do I need to set myself as an administrator manually? This is so frustrating ><

    Welcome to the Apple Discussions!
    I've been putting in the username I used to set up my computer but its not working.
    If your user is already an Administrator user, the user name should be input into the dialog box by default. You should not need to type your name in. Look inside the Accounts System Preferences. Is your user listed as a "Standard" user? Or an "Admin"? If it's "Standard", then you've encountered on of Mac OS X 10.5's bugs. For some reason, some users don't keep their Administrator status. You can follow the instructions in this article to manually set your status to Administrator:
    http://docs.info.apple.com/article.html?artnum=306876
    -Doug

Maybe you are looking for

  • Error 400 when trying to access management portal

    Hi When i go to windowsazure.com and click portal in the top navigation bar, i am sent to login. When i try to login with my Microsoft account, i am sent to an error message stating that: 400 The server does not understand the request. This happens f

  • Itunes wont open up

    hey please help itunes wont open up it says it can not be accessed and i dont know how to fix it please help

  • Automatic Batch Creation at  the time of GR

    Hi all, I have configured automatic batch craetion in GR and same is working in Test client. And transfer the same to Quality but same is not working in quality. I have checked all IMG object for batch are in sync. and I am clue less now what to do?

  • Here's My Problem With the Podcasts App

    So, here's my problem with the Podcasts app on my iPhone 5 - it relies too heavily on streaming and not enough on downloading and syncing. For most of my 8 hrs at work each day I am out of contact with my wireless carrier. And the hospitals IT dept h

  • Undeploy an sda file through command-line

    Hi All,       I want to undeploy an .sda file through command-line,what is the procedure to undeploy an sda file through command-line and send me the procedure for this Thanks & Regards, guru