Administration header could not be found error in Mobile Apps

Hi All,
Our company is using Sybase as the mobile application. Now we have a requirement to stop an opportunity from being saved upon certain condition.
What I did:
~ I implemented ORDER_SAVE, method CHECK_BEFORE_SAVE
~ Inside the method, for some condition i do RAISE DO_NOT_SAVE
Result:
~ The web UI is behaving properly, the defined message appeared, and the document is not saved
~ However, if the transaction is created from Sybase Side, it prompts error "Administration header could not be found for XXXXXXXXXXXXXXXX" <--GUID
Any idea why the error message in the Sybase side is prompting some kind of system error instead of my defined error message? in addition to that, the process also jammed in the MI System.
Best Regards
Andre Julius

I have the same problem when I'm doing the partner determination with the badi COM_PARTNER_BADI.
But I don't known what's happened
Luiz Schumann

Similar Messages

  • "Administration header could not be found" Error POP

    hi
    i m getting the pop up "Administration header could not be found" when i m using the FM CRM_ORDER_MAINTAIN to fill a BP(prospect) in Lead transaction which i have created through a BAPI

    I have the same problem when I'm doing the partner determination with the badi COM_PARTNER_BADI.
    But I don't known what's happened
    Luiz Schumann

  • Error trying to delete CRM trans. Administration header could not be found

    We were trying to delete a few transactions (Leads & Opportunities ) from our system using T code: CRMD_ORDER. but got this error message: "Administration header could not be found XXXXXXXXXXX". I tried using the program CRM_ORDER_DELTE, but got the same error message. I tried BAPI: BAPI_LEAD_DELETEMULTI but got the same error message.
    I applied the Note: 1087462 and then tried to delete these transactions and still got the same error message. Is there any solution to this problem for CRM 5.0?
    Steps for Reconstruction    
    1. Go to T code: CRMD_ORDER
    2. Enter Shift+F5 and enter transaction#: XXXXXXX.
    3. In Menu- select "Business Transaction" & "Display/change".
    4. Once in change mode go back to Menu and select "Business
    Transaction" & "Delete".
    5. Click "Yes" on the pop-up.
    6. The error msg: "Enter Business partner" should appear - Msg#
    CRM_EMAIL320
    7. Hit enter, the error msg: "Administration header could not be found
    XXXXXXXXXX" appears.

    Received response from SAP support partner:
    Please verify first if the issue is caused by badi implementation
    of ORDER_SAVE badi. Please check method prepare and check_before_save.
    Maybe inside your implementation the function crm_order_read is called
    but that is not possible in case of deleting a document as document is
    not available anymore.
    If that doesn't work try this one:
    Please check to see if you have a badi ORDER_SAVE method
    CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
    This is how we resovled our issue - hope this helps someone else:
    Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
    SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
    Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
    This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.
    Edited by: Ramesh Nallabelli on Feb 9, 2009 5:18 PM

  • Administration header could not be found

    Hi experts,
    When I create a follow up task to a service document and save the transaction I take the error popup "Administration header could not be found". If you recommend a solution method I will be very pleased. My system information is below:
    BBPCRM     500     0004     SAPKU50004
    Thanks.

    Hey Ekram..
    I believe this is because of incorrect use of COMMIT WORK or CALL FUNCTION BAPI_COMMIT in one of our BADI's.....
    BADI might be getting called while you create follow up for business transaction...
    Reward points for usefull answer...
    Regards,
    Anand

  • Error:Administration header could not found for support message

    Hi All,
    we are creating the support message in CRMD_ORDER transaction. we are getting an error, "Administration header could not found for support message" while saving. And also it is coming out of the transaction.
    The transaction type is SLFN.
    Please advise.
    Regards
    kumar

    Did you find the solution to this error? I am also getting this error and need to solve the same. Can you please help?

  • VENDOR-EXTERNAL_ID could not be found error while loading supplier conatact

    Hi,
    Please somebody answer to my doubt.
    I am trying to load supplier contact to CLM. I am getting "VENDOR-EXTERNAL_ID could not be found" error for all the entries even though those vendors are present in the system.
    Kindly help this, This is bit urgent to work on..
    Thanks much for your help in advance.
    Regards,
    Gurvi.

    Hi Vikram,
    Thanks for the answer.
    I have done the same thing but not getting object type to select and getting below error without selecting object type and imported.
    records with errors or warnings from file fci_1589662556155572276_contacts.csv                                                                                                                                                                                                                                           
    VENDOR_EXTERNAL_ID     CONTACT_TYPE     PRIMARY_CONTACT     DOCUMENT_DESCRIPTION     NAME     DIRECTORY     COMMON_NAME     FULL_DN     FIRST_NAME     LAST_NAME     COMPANY_NAME     TITLE     ADDRESS_1     ADDRESS_2     CITY     STATE_PROVINCE     COUNTY     REGION     POSTAL_CODE     COUNTRY     PHONE_1     PHONE_2     FAX_1     FAX_2     EMAIL     MAILBOX_ALIAS     MAILBOX_SERVER     TIME_ZONE     CURRENCY     DATE_FORMAT     DISPLAY_LANGUAGE     DEFAULT_GROUP     EXTERNAL_REF     LOCATION     ROLES     INACTIVE     CAN_LOGIN     AUTO_BCC     RETURN_RECEIPT     HTML_MAIL     CREATE_DIR_ACCOUNT     GENERATE_NEW_PWD     SEND_NOTIFICATION     DIR_PRINCIPAL     DIR_CREDENTIALS     EXPORT_EXCEL     DEFAULT_ADDRESS     RECEIVE_DISCUSSION_EMAILS
    Failed: object 1: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]                                                                                                                                                                                                                                 
    30000520     Sales     TRUE     Field is not displayed     LOWER(CONCATENATE(LEFT(J52,7),LEFT(I52,1)))     directory.local.ss               Tom     Boreas     KELCO INC                    Billingsly     RI               48201     US     617-555-1212                    (GMT-5:00) Eastern Standard Time     USD          English                         FALSE     TRUE     FALSE     FALSE     FALSE     TRUE     TRUE     FALSE               TRUE     FALSE     
    Failed: object 2: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]                                                                                                                                                                                                                                 
    I do not what is happening with import feature in ESO. Kindly help me what to do now.
    Regards,
    Gurvi.

  • "The attempted operation failed. An object could not be found" error when double clicking on an ics file

    Operation System: Windows 8 Pro
    System Type: 64-bit Operating System
    Office: MS Office Professional Plus 2013
    I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
    that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
    1-) Open up the Control Panel and go to Mail section
    2-) Click "Show Profiles"
    3-) Click "Add" and give a name to your profile.
    4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
    5-) Finally, set that profile to be used always.
    Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
    Is this a known issue or specific to me?
    Thanks!

    yes, I have the same problem.
    The workaround of saving the ICS file and then importing it into the current calendar
    works, 
    but the ICS calendar
     displays in other section, NOT in the section of my old events.
    why  ??

  • Crystal Report Pick List - "Table ADM1 could not be found" Error

    Hi,
    When preview is select in sales order, we select pick list gets error.
    Crystal Report Window Forms Viewer:
    "Table ADM1 could not be found"
    Error in File Temp {   .........} .rpt
    The table could not be found"
    If I login remotely , then log into SAP as this user I do not get an error.
    I have given user full authorisation.
    I have run Verify Database.
    I am assuming it is some database or network user access rights.
    Could anyone help on this?
    Kind Regards,
    Eric

    Report was developed and tested against a 'test' database and then imported into a 'production' database.
    Problem appears to be that when B1 connects it does not reset the login credentials for the unlinked tables such as ADM1 and OADM.
    Performing the following steps appears to solve the problem.  Not sure how many of them are really necessary.
    1. Develop and test against the test system as before.
    2. Save as a .rpt file outside B1.
    3. 'Set Datasource Location' to the appropriate B1 datasource for the production database and individually link every table as well as the data source.
    4. Save the .rpt file again.
    5. Import into the production database.
    This does not specifically address the issue where it worked when logged in to the server but not remotely.  Perhaps when logged in remotely the test database was not visible but when logged in locally it was.

  • I keep getting the "some items could not be found" error.

    I keep getting the some items could not be found error for some podcasts I downloaded then deleted. Unfortunately, now, I can't get rid of the error message. So I'm trying to search for said podcast to re-delete the entry. And it's not there. And I can't find it anywhere else. How can I fix this?

    Another user named Springbk posted a fix that worked for me as I was having the same problem today:
    I Changed my DNS settings to OpenDNS
    On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
    change DNS by adding ( + )
    208.67.222.222
    then
    208.67.220.220
    click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

  • When I tap the "download for Android" on my Android phone, I receive a "requested item could not be found" error message.

    I am attempting to install Firefox mobile on my Android phone. When I tap "download for Android" on my current browser, I receive a "requested item could not be found" error message.

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    On some supported devices, a bug prevents Firefox from appearing in the Market. This may be related to the recent Market update. You can go to Settings/Applications and uninstall the Market update, then find and install Firefox.
    Or, if you have a supported phone, you can download the app directly from here:
    http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • How can i solve the vpn server could not be found error on my iphone 5s?

    how can i solve the vpn server could not be found error on my iphone 5s?

    FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
    If I connect while in the premises (same LAN), connection is instantaneous and flawless.
    If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues.

  • Deleting Duplicates creates "original file could not be found" error

    I am not running iTunes 8.2.1.6 and trying to delete duplicates that were created as I tried to move my iTunes Library to other drives. Now I have many duplicates - sometimes 3-4 of the same song. If I delete them I begin to get "original file could not be found" error when trying to play the one version I kept.
    Is there some magic to which one I should keep?

    iTunes doesn't help you distinguish between duplicates that are two identical copies of the same file or two separate references to the one original file. If the later is the case and you delete any reference allowing the source file to be deleted then ALL other references to the file become invalid. You can either check the properties of each file before deleting and choose whether to keep or delete accordingly or use itunesremoveduplicates from Teridon's iTunes Scripts.
    tt2

  • TS1702 "App could not be found" error

    I erased all data on iphone. Later when restoring, most of the apps are not syncing back with "because the app could not be found" error. HELLPP!!!

    I assume that you are trying to sync them from your computer's iTunes ? If so do the actual files exist on your computer and the entries in your computer's iTunes aren't pointing to files that no longer exist on it ? If so then you should be able to delete the iTunes entries and then re-download them from the store : re-downloading.

  • Tecra S11: Toshiba Detection Tool: Your product could not be found error

    Hi,
    I use Toshiba Detection Tool to find drivers quickly for my tecra, but for a month now the page gives this error
    Your product could not be found
    It is no problem to select my laptop from the drop down list again and again, but it was comfortable, when it worked.
    Is there a solution for this problem?

    No, there is a Detection tool an exe file. "TOSHIBA-detector,exe" You run it and it opens a browser with your exact product's driver psge. (My Toshiba laptop is a european one.)
    The error message:
    Auto Detect Error
    Sorry!
    Your product could not be found
    Please click here to return to the support homepage where you can manually select your product

  • JWS "Product could not be found" error

    Hello,
    I have an eclipse OSGi project that works from inside eclipse, but when deployed, generates the following error. Below that I posted my jnlp files. I have been looking at this for over two days, and I can't see anything wrong. I have been through the tutorials, bug reports, and obviously Google, but nothing. I know this must be a simple error, but I can't seem to see the forest for the trees, and I am stumped (yes, pun intended)!
    Thanks for any help...
    !SESSION 2009-01-15 13:39:37.414 -----------------------------------------------
    eclipse.buildId=unknown
    java.version=1.6.0_11
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    !ENTRY org.eclipse.equinox.app 0 0 2009-01-15 13:39:38.289
    !MESSAGE Product net.niat.calvin.product could not be found.
    !ENTRY org.eclipse.osgi 4 0 2009-01-15 13:39:38.305
    !MESSAGE Application error
    !STACK 1
    java.lang.RuntimeException: No application id has been found.
         at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:236) (......)
    calvin.jnlp
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp
        spec="1.0+"
        codebase="file:///C:/junk/ERS/">
      <information>
        <title>ERS</title> 
        <vendor>NIAT</vendor>
        <homepage href="http://niat.net"/>
        <description>Electronic Record System</description>
        <icon href="icon.jpg"/>
        <icon kind="splash" href="splash.jpg"/>
      </information>
      <security>
        <all-permissions/>
      </security>
      <resources>
        <j2se version="1.6+" max-heap-size="256m"/>
        <jar href="org.eclipse.equinox.launcher_1.0.101.R34x_v20080819.jar"/>
        <extension
            name="Calvin Feature"
            href="features/net.niat.calvin.feature.jnlp"/>
        <property
            name="osgi.instance.area"
            value="@user.home/Application Data/calvin"/>
        <property
            name="osgi.configuration.area"
            value="@user.home/Application Data/calvin"/>
        <property
            name="eclipse.product"
            value="net.niat.calvin.product"/>
      </resources>
      <application-desc main-class="org.eclipse.equinox.launcher.WebStartMain">
        <argument>-nosplash</argument>
      </application-desc>
    </jnlp>
    net.niat.calvin.feature.jnlp:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="file:///C:/junk/ERS/">
      <information>
        <title>ERS</title> 
        <vendor>NIAT</vendor>
      </information>
       <resources>
        <jar href="plugins/net.niat.calvin_2.6.2.11.jar"/>
        <extension name="RCP" href="features/org.eclipse.rcp_3.4.1.jnlp"/>
      </resources>
      <component-desc></component-desc>
    </jnlp>
    org.eclipse.rcp_3.4.1.jnlp:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="file:///C:/junk/ERS/">
      <information>
        <title>Eclipse</title> 
        <vendor>eclipse.org</vendor>
      </information>
      <resources>
        <jar href="plugins/org.eclipse.core.commands_3.4.0.I20080509-2000.jar"/>
        <jar href="plugins/net.niat.calvin_2.6.2.11.jar"/>
        <jar href="plugins/org.eclipse.core.commands_3.4.0.I20080509-2000.jar"/>
        <jar href="plugins/org.eclipse.core.contenttype_3.3.0.v20080604-1400.jar"/>
        <jar href="plugins/org.eclipse.core.databinding_1.1.1.M20080827-0800b.jar"/>
        <jar href="plugins/org.eclipse.core.expressions_3.4.0.v20080603-2000.jar"/>
        <jar href="plugins/org.eclipse.core.jobs_3.4.0.v20080512.jar"/>
        <jar href="plugins/org.eclipse.core.runtime.compatibility_3.2.0.v20071008.jar"/>
        <jar href="plugins/org.eclipse.core.runtime_3.4.0.v20080512.jar"/>
        <jar href="plugins/org.eclipse.equinox.app_1.1.0.v20080421-2006.jar"/>
        <jar href="plugins/org.eclipse.equinox.common_3.4.0.v20080421-2006.jar"/>
        <jar href="plugins/org.eclipse.equinox.preferences_3.2.201.R34x_v20080709.jar"/>
        <jar href="plugins/org.eclipse.equinox.registry_3.4.0.v20080516-0950.jar"/>
        <jar href="plugins/org.eclipse.help_3.3.101.v20080702_34x.jar"/>
        <jar href="plugins/org.eclipse.jface.databinding_1.2.1.M20080827-0800a.jar"/>
        <jar href="plugins/org.eclipse.jface_3.4.1.M20080827-2000.jar"/>
        <jar href="plugins/org.eclipse.osgi_3.4.2.R34x_v20080826-1230.jar"/>
        <jar href="plugins/org.eclipse.swt.win32.win32.x86.source_3.4.1.v3449c.jar"/>
        <jar href="plugins/org.eclipse.swt_3.4.1.v3449c.jar"/>
        <jar href="plugins/org.eclipse.ui.forms_3.3.101.v20080708_34x.jar"/>
        <jar href="plugins/org.eclipse.ui.workbench_3.4.1.M20080827-0800a.jar"/>
        <jar href="plugins/org.eclipse.ui_3.4.1.M20080910-0800.jar"/>
        <jar href="plugins/runtime_registry_compatibility.jar"/>
      </resources>
      <component-desc></component-desc>
    </jnlp>

    Well, I found the solution to my problem.
    It turns out that this error is caused when your JNLP app is missing resources needed by equinox. In my case, I was missing the com.ibm.icu_xxxxx.jar and needed to update my org.eclipse.swt.win32.win32.x86_xxxxx.jar. I should have been clued in when the application ran in eclipse (my development environment, which has the proper files), but not under JWS. Correcting my .war build with the proper items did the trick.
    If this is happening to you, make sure you place all of the required bundles and fragments into your deployment directory.
    Good luck, I hope this helps someone else!

Maybe you are looking for