Administration Issue

I am trying to administer 3 PMG4's -quicksilver - I can access them via screen share etc...but cannot drag and drop files or folders not even into the public folders . All sharins turned on etc.
What am I missing/not doing correctly?

Perhaps the shares are read only.
Perhaps a router is blocking the web traffic.
You could use FTP.
*Local Lan*
Whether or not you need a cross over cable to connect between two computers depends on the model of the computers. Most newer computers and newer Ethernet hubs automatically detect the the send and receive wires on the Ethernet port so you do not need to use a crossover cable. Older computers and older Ethernet hubs did not auto-detect, so you need the proper cable. You could use a cross over cable to attach your machine to another computer.
I use pureFTP server. It comes as part of PureFTPd Manager software download at this site.
http://www.macupdate.com/info.php/id/12630
PureFTPd Manager is the gui program manager for the pureFTP server.
*Across the internet*
Try:
PureFTPd Manager. Free. Is the server. It runs on your home computer. I found PureFTP easier to use than the Apple solution in Tiger. The apple solution could have changed.
You would have to contend with these issues:
Enable your Mac firewall to pass ftp traffic.
Do you have a local router? Enable it's firewall. Tell it to pass ftp data to your home mac.
Verify that your isp lets you run an ftp server on your home mac.
Dynamic ip address. See
http://www.dyndns.com/services/dns/dyndns/ ( Free )
http://www.tzo.com/mainpagetext/DynamicDNSorStaticIP.html ( small fee )
One your laptop, run one of these ftp clients:
http://discussions.apple.com/message.jspa?messageID=12753786#12753786
Robert

Similar Messages

Can't preview RAW files in Bridge CC, administrator issue?

Can't preview RAW files in Bridge CC.
When i try to upate Bridge, it says:
Bridge is unable to check for updates, cause it can't connect to the internet or user is logged in as a non-administrative user.
So then i have to log in as a administrative user to the Bridge...and update..
Can't it be done easier???
I must also say i have also Bridge CS6 installed on pc and there everything is working fine.
Thx.

1/ Adobe Bridge should be possible to open without administrator issue.
By default it does, something seems wrong with your install
2/the images DO appear first for 2 or 3 seconds , then it turns to a RAW file icon.
Again indicating a wrong install, you see the embedded jpeg previews briefly but then the Raw thumbs should be build. When you see the generic Raw icon this means you don't have the correct version of the ACR plug in installed to match your camera or no converter at all.
Try this page:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
3/i only succeed in openening Bridge descently , so with ableing to see RAW files , WHEN i go to c:/progamfiles/Adobe/AdobeBridhecc/Bridge.exe
When, If i copy the exe file for opening Bridge CC and i put it on the Desktop, it DOES NOT Preview the RAW files.
Here you have lost me. As a Mac user I'm afraid I don't know nor understand anything about .exe, I download the .dmg file for an application which then automatically opens and I just click on the install icon, provide admin password and serial number once and then start using it without bothering about install ever again

Workflow Administrator issue

Hi,
ebs 11.5.8
We successfully cloned from prod to dev. DEV been up for ~1 month.
We now have an issue with the Workflow.
I log in as sysadmin -> system administrator responsibility then workflow -> Global Preferences
In the html page that opens it says "Only the Workflow Administrators can edit Default settings."
I tried with Workflow Administrator -> Global Preferences but same results.
I check for profile (System Administrator -> Profile -> System : %workflow%) but found nothing that would indicate who is the admin of the workflow.
I think this is due to autoconfig, setting the default value for the workflow administrator.
How can I find who is the owner and change it?
Thank you~
Edited by: Nayas on Oct 27, 2010 2:03 PM

Hi,
I log in as sysadmin -> system administrator responsibility then workflow -> Global Preferences
In the html page that opens it says "Only the Workflow Administrators can edit Default settings."Please see (Unable To Login As Workflow Administrator As Sysadmin [ID 396821.1]).
How can I find who is the owner and change it?Please see (How To Reset Workflow Administrator [ID 413711.1]).
Thanks,
Hussein

Domain Administration issues

I am one of two Apple System Administrators for our company. We recently received a few new Macbook Pros, and upgraded them to Leopard. When setting up the macbooks, we created admin accounts, and then created individual accounts by setting up the Active Directory in Directory Utility.
The issue we are experiencing is when we are on the network at work, it recognizes our domain privileges just fine. OS X will let me install, remove programs, perform administrative tasks. However, when I/we take our macbooks home for the night and get onto our home networks, the administrator authentication does not store locally in the computer. I have to perform installation/etc. tasks by authentication with the admin username/passowrd. This isn't a problem for me personally because as I am an Administrator; however, for those who are not system admins, they do not know the system admin u/n & p/w. Is anyone else experiencing this?
Let me know if you require additional info.

Hi,
I figured what the problem is. It is on the Hardware side for the port I was try
to accessing was not configured to accept requests. Please ignore my earlier questions.
Thanks,
Gugga
"Gugga" <[email protected]> wrote:
>
I am using the same trial license file for both the domains. Can this
be an issue
? Please help.
Gugga
"Gugga" <[email protected]> wrote:
Hi,
I created two standalone servers one in production mode and the other
in development
mode. Both are listening in two different ports. I was able to start
them both
in the background without any issues. I tried to access the administration
console
for domain 1 (production mode) by typing the URL: http://<host name>:<portname1>/console
and it came up fine. But when I try to bring up the admin console for
domain 2
(development mode) by typing the URL: http://<host name>:<port name2>/console
it keeps saying page cannot be displayed. I am not able to find anyerror/info
in the server log files. Am I doing anything wrong in basics here ?Please
help.
I am running WLS 7.0 SP2 on HP-UX 11
Thanks,
Gugga

"Run As Administrator" issue Ill CC 14

I'm using Illustrator CC 14 on Windows 7. About 2ish weeks ago I got an error that I need to run Illustrator as Administrator. I've attached the exact error.
Illustrator still functions properly, but the error before is annoying.

Hi BinghamTheMan,
This message is shown by Ai if a prvious version of Ai is uninstalled after installing the current version. Ai tries to see if file association and required registry settings for executing vb scripting are correct or not on every launch and gives you an option to correct it and for that Admin privilege is required.
Have you tried running with Admin privilege to fix these registry issues.
Sanjay.

WRT1900AC - NAS Administration issues...

I just installed the WRT1900AC to replace a failed E3000. I lived with the E3000 for years as Linksys gradually improved the software support for usb connected NAS drives and have the drive (A 1TB Western Digital USB drive) connected and successfully mapped on a Win 7 X64 computer. Unfortuately, I have always had "permission issues" with the previous setup, due in part to the networked host computers I use to access it. I have two Windows XP dinosaurs in my basement and a Vista Business desktop, as well as my "main" Win 7 (X64) computer. When I had permission issues in the past, I would periodically connect the drive dricetly to one of the WinXP computers and reset "full permission" to "Everyone" on the whole drive.
Once again, now that I have the drive mapped, the folders on it are all viewed by the Router as "Read Only" so I can't do anything. I have my Windows devices all set up with the same users and in the past have shared files freely within my network, but always avoided saving stuff to the drive from anything but Win XP, the lowest common denominator in order to assure that I could get at them from everywhere.
Now I would like to be able to continue to access everything from XP in at least "read" mode, but I would like to be able to give at least one Windows user administrative access to everything on the NAS including the ability to create and delete folders and move files around. I know how to do that if the drive is "Local" to one of my computers, but I have no clue how to set things up with an already existing file system on the new WRT1900AC. Suggestions, simple steps to take, etc. would be greatly appreciated.
Note that I do not fully understand what the WRT1900AC means by turning on "folder access" but I fear that if I do that there will be little or no chance of using WinXP or possibly the Vista machine to create and manipulate files on the NAS.
One of my key objectives is to reinstate unattended Backup from software running on each of my four computers in a way that assures me that I can restore from a backup to a different host if I need to. Another is managing a fairly extensive and growing libarary of digital photos and video produced by my collection of cameras and phones.
Solved!
Go to Solution.

The permission per user can be edited using the Linksys Smart WiFi.
By turning ON the folder access, you can specify the folder accessible per specific user. Say for example, you have folders 1 & 2 and you have users 1 & 2. You can set permission that User1 can only view files in folder 1 while User2 both view and edit files in both folders.
You can add as many users as you can access the shared drive. This link for sure is helpful, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=5752a2a259ae464f8b85bc673faf7bb9_Configuring_share...
You can then press Windows + R on the keyboard and type \\192.168.1.1 (or double back slashes and the IP of the router). The computer will ask the user to input the username and the password that you specified in the router to access the shared drive. This should applicable through different Windows OS versions.

Create a new target application - Secure Store Service administration issues

Hi,
I am trying to create new target application, when I go to Secure Store Service in Centra admin I have:
Cannot complete this action as the Secure Store Shared Service is not responding. Please contact your administrator.
I have used this few days ago and avarything else is working fine on the server, and I have applications created with it running fine.
Any help is appreciated.
cheers
Valko

I know this has been open and possibly answered for a while but I thought I would mention what I ran into since I haven't found it posted anywhere.
It was confusing because once I clicked the Ssecure Store Service I recieved the message that is mentioned here in this thread. With that, you can't make any changes. After trying numerous things I simply highlighted the Secure Store Service (the Applicaiont
not the Application Proxy) and selected Properties from the Operations section of the ribbon at the top of the page. This opened the properties page where I was able to change the Application Pool that the service was using.
In my case it was using the Sharepoint Web Services Default and changing it to the SecurityTokenServiceApplicationPool, which I had already configured to run on a named account with adequate priveleges (although it should run find on Local or Network
Service if they are configured correctly in IIS) corrected the issue.
Hope this helps someone...
Cheers

TACACS Administration issue in Cisco ACS V4.1

Hi,
I am using Cisco Secure ACS V 4.1 for windows. When takingTACACS+ Administration report, report is not getting generated. I have come to know that this is a Bug in this version so as per the support forums they have suggested to update to ACS-4.1.1.23.Link which shows this is given below.
https://supportforums.cisco.com/message/2015469;jsessionid=E5E34B6AE1216E24188E4712050285DC.node0
For the same i have searched in cisco but this particular version is not present. enstead ACS 4.1.4.13 is present.
Please let me know if i update ACS 4.1.4.13 will it resolve this TACACS+ administration report issue. else provide me the remedy to fix this issue.
Thanks,
Krishna.

Krishna,
That link does not have any full software listed, only patch are listed. This bug is fixed in ACS 4.1.1.23.5 accumulative patch which can be downloaded from that link.
Incase you want to upgrade ACS, you need to open a TAC case to get the full software.
Regards,
~JG
Do rate helpful posts

Regd-System Administration issue

Hi Gurus,
I have configured Central System Administration in Solution Manager and the "Open tasks" are available. If i click on the open tasks, it takes me to the configuration screen and from there if i click on ex: "Start DB12", actually it should take to the respective satellite system. But in my case, it is not taking to the satellite system. Trusted RFC is working fine for all satellite systems.
Could you please let me know what could be the reason for this issue.
Thanks&Regards,
Vaishali.K

I forgot to mention one thing. I got this message once when i try to call SMICM. "Call of SMICM is not possible: Function module "/SDF/GEN_FUNCS_EXT_CALL" not found."
Thanks&Regards,
Vaishali.K

SAP HANA Database Administration Issues

Hello Gurus,
I would like to know and understand the most common or frequently faced major issues by SAP HANA Administrators.
Shirish.

Hi Shirish,
You should start by reading below blog from Andy:
http://scn.sap.com/community/hana-in-memory/blog/2013/05/27/andy-silvey--sap-hana-command-line-tools-and-sql-reference-examples-for-netweaver-basis-administrators
Regards,
Vivek

Delegated role administration issue

1. Created roles role 1 and role 2
2. Created an admin role to manage membership of role 1 and role 2
3. Created user 1 assigned to role 1
4. Created user 2 assigned to role 2
5. Created admin 1 assigned to admin role
6. Created an authorization policy with:
Permissions (Modify Role Membership, Search for Role, View Role Category Detail, View Role Detail, View Role Membership)
Data Constraints (Role 1 and Role 2)
Assignment (admin role)
7. Logged in as admin 1 into OIM, can't find administration (or other) links using which i can modify role membership of role 1 or role 2
Is there something else that i must be doing? Please help?
Thanks in advance.

Rajiv,
Thanks for the help. In my authorization I had to add "create role" to the permissions, only then administration link showed up. This probably is a bug as i don't want this user account to have create role functionality, but only modify role membership. Anyways, this works for now.
Permissions before admin link showed up
Modify Role Membership
Search for Role
View Role Category Detail
View Role Detail
View Role Membership
permissions after admin link showed up
Create Role
Modify Role Membership
Search for Role
View Role Category Detail
View Role Detail
View Role Membership
Thanks much,
Prasad.

Where to post system administration issues

friends,
i have an issue with the SAP working which is installed in my laptop, where to post these SAP BASIS related issues ?
the issue is when i am trying to click on SAP management console it is showing the following message
Snap-in failed to initialize
Name:SAP Systems Manager
CLSID{633547EE-A302-11D1-AE59-080009B07DBB}
Snap-in creation failed
The Snap-in is not created
can any one forward to known friends and provide some solution
it was working fine and suddenly this issue has come
regards,
madhu kiran

Hi Madhu,
Please refer this thread very useful.[Thread|Snap-in Creation failed;
Regards,
R.Brahmankar
Reward if useful.

Error while creating sites on entire site collection - the file you are attempting to save or retrieved has been blocked from this web site by server administrator

Hi,
I am trying to create a new sub site. Everytime I try to create the site I get this error:
the file you are attempting to save or retrieved has been blocked from this web site by server administrator
This applies to almost all site templates except the "blank site" template. I am logged in as System Administrator.

Issue resolved!
Don't know how but somehow, xml was added to the Blocked file types. Removing the entry did the trick.

CS3 Wont Open in Windows 7--AMD Processor Issue--HELP!

After much, much searching I've found there's been a common issue with AMD Processors on Windows 7 and getting CS3 to run correctly. Apparently a patch was created, that fixed the problem for users with similar issues. But the links to those patches are no longer valid.
I have no phone right now, chat aint working--and I can't email Adobe of course, soooo someone please...
The forum I found with those links and explanations is here:
http://www.sevenforums.com/software/25313-adobe-cs3-64-bit-ultimate-3.html
From there, this pretty much describes it:
"Just bought an HP Pavillion Elite with Windows 7 Home Premium and AMD processor. Photoshop CS3 would install but would hang when accessed. Some forums suggested that Photoshop CS3 is incompatible with this AMD processor and Windows 7 (64-bit). I called HP and was told the software is incompatible. I was just about to return my computer when I found this forum. I downloaded and installed the patch. I then opened Photoshop (for the thousandth time) and voila--it FINALLY opened!!!"
I've also found many other isntances of this complaint with AMD Processors--Photoshop gets a window open then goes into Not Responding. All other applications don't open at all (but are visible in my task manager). So it's not really a Photoshop specific complaint but I'm placing it here.
I've updated graphics card, changed the desktop theme to Classic, not Aero, tried running the programs in different compatibility modes, all to no avail.
This patch these guys are mentioning has GOT to be it. Someone help me get back to work!!
thank you all in advance.

I had not tried "run as administator." What the hell is that?! I see where to do it and all, but honestly, these permissions
/security/owner/administrator issues on Windows 7 are nothing short of ridiculous.
Every time I think Microsoft may have finally done something right...
I'll try that again down the road. For the moment, looks like Adobe Acrobat 8 is completely incompatible with Windows 7 and almst impossible to delete from the system. SO first task--restoring factory setttings.
In the meantime I'll speak to that patch for Licenseing:
Solution 1: I ran it, but didn't seem to do anything. There was no confirmation of a successful "install," or what you might call it. Secondly, when running again, I was never prompted to enter 0.
Solution 2: I believe those settings were already set as described and so I couldn't really make any changes.
Solution 3: Those folders don't exist, so couldn't do that one.
For various other reasons I wasn't having luck with the next couple thanks to stupid permissions. I'll try again once I've gotten back up to speed.
But yea, someone out there seems to have found a CS3 patch. Am I at least to presume that CS5 would def. work on my comp, and therefore, CS6 is a shoe-in?

Missing administrative tools in the start up in windows 7

I have a touchsmart 310-1020 pc and I am have administrator issues, some time I cant save to my files , it asks for administrator permission and even when I am logged on as the administator. I went to the startup menu to aministration tools and it is missing from startup.... what do I need to do to get that back?

Hello ab78411:
Welcome to HP's forum. Go to control panel switch view by : ( to read ) Large Icons on top right. Now all icons will display. Locate Administrative Tools right click on icon select create a short cut. Close out window display your desk-top icons if they are turned off. Now left click mouse on Administrative Tools icon and hold down click while you drag it to start button Ounce it opens task menu continue to drag the icon up to the second space very top of menu. Release click hold. Now it is pinned to start up menu. I had you put it at top section so it will take longer to bumb off. You can move it to the very top by moving down the very top icon to below it. Using the same method as before. Please click on Kudos if this has resolved your issue. Thank you frrw.

Administration Issue

Similar Messages

Maybe you are looking for