Administration server error: could not connect to server
I was just viewing some outlines and calc scripts. I got un error trying to close a clac script. It said unable to unlock and then closes EAS. I tried to log back in and I am getting a could not connect error. How do I fix this or do I just recycle the server
A little less drastic is to restart the EAS service. I've had an occasion or two where the service just up and stopped for no apparent reason, leaving me hanging with several hours of work to be redone in an outline... <sigh>
Anyway, restarting the EAS service may be all that you needed to do, it may have aborted or hung itself.
Edit: clearer to say service here rather than server.
Similar Messages
-
EAS server error: Could not connect to administration Server
Hi,
I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
"Server Error: Could not connect to administration server".
I tried accessing the same through the web URL and I found "404 error - file or directory not found".
I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
The log retireved from the HyS9eas-sysout.log file is below:
<Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
<Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp not referenced from EAS#11.1.2.0
Application name: EAS#11.1.2.0
Application source: eas.ear
Server name: EssbaseAdminServices0
Server port: 10080
Server SSL port: 10083
Application context: eas
Registry product type: ESSBASE_PRODUCT
Registry physical web application type: ADMIN_SERVICES_WEB_APP
weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for EAS#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
<Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
>
<Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 05:12:27 JST 2002,
To: Wed Mar 23 05:12:27 JST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
Kindly help me out in solving this issue.
Thanks in advance.
Regards,
Balaji PHi John,
Sorry for replying late.
I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
When i looked in to the Config tool.log,I got the following messages.
[2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
[2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
java.lang.NullPointerException
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
at java.lang.Thread.run(Thread.java:619)
Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
Appreciates your help.
Thanks & Regards,
Balaji P -
Network error could not connect to server 127.0.0.1:5900
I have created a virtual machine in VM manager from a template and when I try to view the console I get the error "network error could not connect to server 127.0.0.1:5900"
The way that I have everything set up is this.... I am using Oracle VirtualBox installed on Windows 7 and I have created a virtual machine in VirtualBox with Oracle Virtual Server installed and I have Oracle VM Manager installed on that same virtual machine. After reading some forums I found out that I needed to install TightVNC to be able to use the console from Windows IE. So, I have installed TightVNC on my OVS but I can not even tell if it is running. I have also made sure that in iptables that port 5900 is open. I have confirmed this by using nmap to scan my ports and port 5900 is open for vnc when my virtual machine in vm manager is running. I just can not figure out why I am getting the network error unless TighVNC is not running on my OVS. Does anyone have any ideas for why this might be happeneing. ThanksHi,
it seemed when you registered the OVM server to the OVM manager, it did not deliver the correct hostname, but the local address instead.
See if your /etc/hosts contains the hostname in the 127.0.0.1 line.
Correct the /etc/hosts, remove the OVS server and reregister with OVM manager.
Regards
Sebastian -
I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
Let me know if anyone else has been down this path and what they have tried.Hi BillOlive,
Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support -
Error " Could not connect Administratin Server "
Hi All,
I am getting an error while connecting to Administratin Server " Could not connect to Administration Server "
Server : AIX 5.3 ML7 64 bit
Application Server : Apache Tomcat
Version : Hyperion System 9.3.1
While configuration it does not give any error and shows the successfully deployed.
I re-configured the Adminstration Services again, stopped / re-started the services, but it did not help.
Any suggestion / help would be highly appreciated. Thanks !
Regards
BD Mahendru
Presently in Jordan : + 962 777 603308AIX server for SS. I didn't want to mess up my original files so I created a new start script and a new setJavaRuntime script.
You can use FTP to send the copied file and edit. there and sent it back
1. Make a copy of the file /Hyperion931/deployments/Tomcat5/bin/ startSharedServices9.sh
2. Edit the original startSharedServices9.sh file and change the section that sets the Java:
To check JAVA HOMe. please type env or open the . .profile and you should see that,
This is what you will see.:
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime.sh"
to
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime142.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime142.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime142.sh"
3. Copy the Hyperion931/common/config /setJavaRuntime.sh to setJavaRuntime142.sh
4. Edit the setJavaRuntime142.sh file and modify the JAVA_HOME to point to Java 1.4.2:
JVMS="JRE-IA64 JRE-64 JRE"
for JVM in ${JVMS}; do
if [ -x "${HYPERION_HOME}/common/${JVM}/${VENDOR}/1.5.0/bin/java" ]; then
JAVA_HOME="/usr/java14"
break;
Use the modified startSharedServices9.sh to start Shared Services.
Perform the Sanme with AAS also.
Kind Regards,
Sriram -
EAS - Error: "Could not connect Administration Server
hello All,
i am very new to EPM
i have installed EPM 11.1.2.2 with web application deployed to single manage server
OS : windows server 2008
database : sql server
when i try to connect EAS console it gives me error
Could not connect Administration Server
any idea?If it has been deployed to a single managed server on the default port then you will need to add the server in EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/ -
Calc Manager Error "Could Not Connect To Dimension Server"
Could not connect to Dimension Server.
Please make sure that the required services are started.
https://ServerName:19443/HyperionPlanning/servlet/HspAppManagerServlet:
Connection refused: connect.
Hyperion Planning - 11.1.2.3
can anyone help me.
Thanks,Hi ,
Please look at the support document from Oracle.
Calculation Manager Error "Could Not Connect To Dimension Server" (Doc ID 1634959.1)
Thanks,
~KKT~ -
Connection test to database failed: could not connect to server
I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks! -
BOXIR3- Unable to log on : Could not connect to server - FWM 01003 null
Hi
I've just installed for the third time BOE Premium Server XIR3
Config:
Windows Server 2008
BOXIR3
CMS on MySQL
Tomcat 5.5
I've installed from scratch my server and I could not connect to any application
CCM : the SIA is up and Running, but I could not manage server to see what is launch on the server
> Error : Unable to log on : Could not connect to server SERVER_NAME:6400. Please check that the server name is correct, and that the server is running
Tomcat Configuration: Can't connect to that services too
-->Error : Unable to open the service BOE120Tomcat
CMS / Infoview : Unable to connect too.
--->Error : The server SERVER_NAME:6400 is not found (FWM 01003) null
(Here I translated the error message because I've got the message in french...)
Concerning the MySQL database, it's seems to be correctly installed as I can access the database via MySQL Admin tool.
I've seen lots of similar issue but I never found any resolution or workaround.
So If you have any ideas to help me it would be great as I must make a demo on customer site on monday morning :o(((
Many Thanks
Anne-MArieHello,
Please refer to the following KBAs, may be this can helps you:
http://service.sap.com/sap/support/notes/1884899
http://service.sap.com/sap/support/notes/1351898
And as Sneha said, make sure that the SIA and the CMS don't use the same port number.
I hope that this helps you.
Regards,
Asma -
Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1 -
Could not connect to server after OS got blue screen, Pls help.
Hi Expert,
i want to ask about this error.
when i'm trying to log in in BO Universe designer.
I'm getting this error.
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Unable to log on: Could not connect to server ekawati-f4e1e59:6400. Please check that the server name is correct, and that the server is running.
(hr=#0x80042a01)
service database and BO is already running.
it's happening after my os got blue screen.
does blue screen affect that much to BO?
how to solve it?
Please advise.
Thanks.
Regards,
Y Permana.Thanks for your replied.
I checked in manage servers, the [BO server].connectionserver is stopped.
After i checked in services, the database(MySql) service can't turned on if the CMS service is already running.
is that ever happen in your experience?does it happen to other database?
Could you tell me, what priority to turned services whether database, CMS or BO server?
Thanks.
Regards,
Y Permana. -
Server.app "Could not connect to the server."
I just downloaded and installed Mountain Lion (the day after its release). It seems fine so far.
The next day I decided to install Mac OS X Server, so I dished out $20 and downloaded it from the App Store.
"setting up your server is incredibly simple" - Yeah okay. This is exactly what I do:
1) Open server. The "Set up your server" screen comes up.
2) Click "Continue".
3) Click "Agree".
4) Authenticate
I get a dialog box that slides down and says, "Could not connect to the server." The only option is "OK".
5) I select Manage->Connect to server..., and choose "This mac" from the list and click "Continue". It brings me back to the same screen that I started with.
6) Repeat 1-4. Same results, except that the application exits (gracefully - but with no feedback).
There aren't many options at all and I can see nothing else I can even try. I'm on a Mac Pro connected wirelessly to a Time Capsule. I also have a MacBook Pro, which curiously got further than I could get on the Mac Pro. Both computers are connected wirelessly to the same network and configured the same (as far as I can tell). The Mac Pro has far superior hardware compared to the MacBook Pro. (MP: 6-Core 3.33 Xeon / 24GB RAM/ 1TB HD / MBP: 1 Core2 Duo 2.4 GHz, 4 MB RAM, 160 GB HD). Both computers are running Mountain Lion.
I'm completely new to using OS X Server. I figured I could learn something with it for only $20. If I left out any important details, please let me know.
There's no documentation out there for this new product and I could find nobody else who has had any similar issues. Any help is greatly appreciated.It works now but here's the thing...
When I was at home with my Mac Pro on the wireless is when it wouldn't work. I was able to install and get further on my MacBook Pro (which is much older) on the same wireless.
I brought my Mac Pro to work (different LAN), connected it to the wired connection, and tried the Server software. Same results - "Could not connect to server."
I had a few other issues with crashing and for some reason my Terminal was displaying "brucetablet:" at the command prompt. I bought the computer used and it came with Lion pre-installed. I upgraded to Mountain Lion and it just seemed like a lot of weirdness, so I decided to wipe the hard drive and do a clean install of Mountain Lion.
After the clean install, I tried again and it seems like it works just fine.
That annoying "brucetablet:" is still there though (which I guess is a topic for another thread). -
Could not connect to server Ovi Suite 3.1.0.84
when i update my nokia e71, ovi suite asks for login id and when i put username it show could not connect to server check your internet etc.. my internet is perfectly working . i have tried all ways like GTE cerficates removal and rootupdate etc. i m fed up of these.. plzzz help me nokia experts. i m using Ovi Suite 3.1.0.84 and also used .94 version but no help. i m using Xp SP3 with 1.49 gb ram and 50 gb hardisk
Download and upgrade new version NOS3.1.0.86 and try
http://europe.nokia.com/support/download-software/nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You -
PHP Soap error Could Not connect to host
Hi all, this is my first time on this forum so I hope I am not doing anything stupid.
I have a wsdl file in my local server, when I try to access the code I get error could not connect to the host each time. I thought this was my programming mistake until I tested it on my ubuntu and windows server, It seems to be working fine on them. Is there something that I should enable some module or port ( I already have my soap extension loaded in php). Please help me out with this.
Last edited by rohankoid (2012-04-16 05:05:22)Hi,
Welcome to the Discussions
At one time Google(Talk) only offered the service to Google Mail accounts with either @gmail.com or @googlemail.com endings.
Nowadays they also offer Google IDs that can then be made to work as GoogleTalk IDs.
These are the iChat 3 instructions http://www.google.com/support/talk/bin/answer.py?answer=24076 with pics.
In iChat 3 there was no GoogleTalk option and was added as Jabber ID and then you had to change the Server name (it presumed that it was either gmail.com as Defcom shows or googlemail.com) by taking the end of your Google Mail ID and puling it though to the Server Name box.
In iChat 4 and 5 there is a Google ID option and this will set the Server as talk.google.com as you list.
Google allows Port 443 to be used and the gmail.com as server name
My Current Settings
NOTES.
Based on the Google Instructions your Name in iChat must match the ID you see when you login in to the Google Mail page (Or web site).
The Mail App seems to cope with either and grab your mail for download but iChat prefers that you use the one as Listed.
Also on your Google Account have you enabled TALK ?
You need to do this first.
8:24 PM Tuesday; March 16, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Tns error could not connect to database but can tnsping and sqlplus
The new install OBIEE 10.1.3.4.1, with two Linux RH/64 Bit servers set up and running, but can't get to 11g database when running reports.
Error: nqsError 17001 Oracle Error Code 12154, message ORA-12154: TNS could not resolve the connect identifier specified at OCI call OCIServerAttach. nQSError 17014 could not connect to Oracle database
Server 1 BI Server
BI server is running.
oc4j is running.
jdk is installed
/setup/user.sh variables and libs set
.bash_profile variables and libs set
oracle client installed with lib32
can tnsping the database from here using SID
can sqplus login to the database from here
changed connection pool offiline and uploaded new .rpd
this script does not work /setup . sa-cli.sh to test client, nothing happens, also unable to connect to BI Server in online mode from Windows client 32bit.
Server 2 Presentation Server
saw server is running
set odbc AnalyticsWeb DSN to point to BI Server 1
Since I can ping and connect with tns, why is presentation server throwing errors?
Thanks for the helpCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary
Maybe you are looking for
-
i find this msg whenever i go to gmail - 'Try now Unable to reach Gmail. Please check your internet connection or company's network settings. Help.' i tried to resolve the issue by clicking the 'help' hyperlink in that above mentioned msg but couldn'
-
How to view the Users in the Portal Activity Report
Hello, Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name? Please explai
-
My contacts app is no longer on my iPad mini
My contacts app is gone but my email account and iMessage work fine. How do I retrieve the app on my mini?
-
How do I re-install Mountain Lion on a new hard drive (replacement)?
I have an older iMac 24" (2007) that has been up-graded to Mountain lion. I want to replace my hard drive with a bigger one (has 500Gb). How can I re-install Mountain Lion on my new drive? I have Time Machine on this machine.
-
Can I install 32-bit Oracle on 64-bit os
Dear Gurus I have installed windows-7 (64-bit) home basic OS. Can I Install Oracle 10g (32-bit) software on above OS. Thanking in advance Sanjeev