Administration Tool login via 10817 failed

Hi,
Have a problem for a long time on login issue to the administration tool via ksvradmin in iAS 6.5. Lived with it until recently as need to change some parameter thru the admin tool.
Does anyone has had this problem and got it solved? When attempting to register a server using the default info as below, it keep prompted me login failure:
Name: iAS1
Hostname: localhost
Port: 10817
Username: admin
Password: xxxxxxxxxxxx
I do not have any problem connecting to the iDS or startup any of the services just that I cannot login and register an server. Please share your experience/solution to the above issue if you have resolved such issue before. Thank you.

Hi,
This is interesting!! After running through the thread, I suspect there is some issue with your configuration not the .rpd. Taking your words that replacing your old .rpd does not work too and of course the your old .rpd would have worked, here are my prime suspects
1. Some clustering setup running behind scenes. I not get any other instance, when a .rpd could be shared except when a master .rpd is shared with cluster servers. So is the "Sharing violation" error.
2. Some Init blocks in your .rpd with "Required for Authentication" set. For example, an init block with "required for authentication" is bound to fail and not let you in online mode, when the underlying source/ DSN etc has issues.
So, check on these guys and see if you nail them down first.
Hope this helps.
Dhar

Similar Messages

Unable to login to Administration Tool

Hi,
i've following problem.
I'm trying to open rpd in Online Mode using Administration Tool on Oracle Business Intelligence Suite 11g. But when i insert user e password i receive following error:
"Logon Failed".
I've investigated on error cause and opening Administration Tool log file i find following error traced:
[nQSError: 61013] File error: path=C:\app\oracle\product\ofm\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\OBI11_merged_BI0020.rpd, code=32: There has been a sharing violation.
Repository password is correct because i'm able to open rpd in Offline Mode using it
In addition i'm able to login in Analytics and Enterprise Manager environment with weblogic username and password. I insert the same credentials when i open rpd in Online Mode
How can i resolve the problem? Thanks

Hi,
This is interesting!! After running through the thread, I suspect there is some issue with your configuration not the .rpd. Taking your words that replacing your old .rpd does not work too and of course the your old .rpd would have worked, here are my prime suspects
1. Some clustering setup running behind scenes. I not get any other instance, when a .rpd could be shared except when a master .rpd is shared with cluster servers. So is the "Sharing violation" error.
2. Some Init blocks in your .rpd with "Required for Authentication" set. For example, an init block with "required for authentication" is bound to fail and not let you in online mode, when the underlying source/ DSN etc has issues.
So, check on these guys and see if you nail them down first.
Hope this helps.
Dhar

The connection has failed while creating a New Repository using Oracle BI 11g Administration Tool

hi
In the BI Administration Tool when i try to create a “New Repository…” faced The connection has failed I try all of these solutions but dident work..
1-configured my “System DSN"
2-enter “TNS_ADMIN” for the “Variable Name” field and for the “Variable Value” enter the location of my OBIEE
3-copy the sqlnet and tnsnames.ora files into E:\obiee11gtmt\Oracle_BI1\network\admin and E:\obiee11gtmt\oracle_common\network\admin
4- put this in DSN with connection type OCI 10g/11g (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = IP Addr)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ))
please help me
regard

1.Place tnsnames.ora file in the following paths,
E:\obiee11gtmt\oracle_common\network\
E:\obiee11gtmt\Oracle_BI1\network\admin
2.Navigate to
E:\obiee11gtmt\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup\
Open user.sh file in a notepad
Set Tns_names paths as shown below with your tnsnames.ora file’s location,
set TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
The above path is of your installed Database tnsnames.ora file
I guess you didnt do this step. This will solve your issue.
Restart all the services
If helpful, please mark the answer.
Srikanth

"invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, ALL SETTING ARE CORRECT HELP

I have been updating my site over the last week, using Iweb SEO TOOL, but suddenly 2 days ago I can no longer update when i go to publish it says "invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, the password and all settings are correct.
I am 100% sure the all the setting are correct, as it has been working for the last 7 months and I have just been updating it, then suddenly it stopped, I have all the FTP settings wrote down, and even changed the passwords twice hoping that may work to no avail.

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.

Kerberos & AFP fails to login via kerberos

Hi,
I am unable to login via afp using kerberos. When i used the kadmin.local -q listprincs comand to list the principals the afpserver is listed. When i change the authorization to kerberos. I revice a : "Connection Failed! The User Authentication Method required by this server can't be found." It was working under 10.4.3 is there any changes since.
PowerMac G5 DP 2.0 Mac OS X (10.4.4)

You get this message:
<blockquote>The server has rejected your login. Please verify that your user name and password are correct. Error Code: 800cccd1 </blockquote>
And Thunderbird can successfully receive/send on the test account but not on your own account, with the same server/port/SSL settings?
Other than the possibility that your password is incorrect...
Does your server require or have you tried entering your login username in this format:
domain\username
I don't know whether the following is relevant to your mailbox (server-side issue): [http://support.microsoft.com/kb/949926 Error when you use an IMAP4 client or a POP3 client to log on to a delegate mailbox of Exchange Server 2007: "800cccd1"].

Oracle BI Administration tool - Connection has failed

Hi, can any one let me know how to connect database in oracle bi administration tool, am trying to connect it but it always give an error the connection has failed

Hi,
If your source is Oracle then you can use OCI and provide the user name and password details in connection pool,
else create one ODBC connection in your local machine and select the created ODBC from the connection pool and give Mauser/password credentials.
Mark If Helpful/correct.
Thanks

Open Administrator tool failed after Java Add-in

Hi all,
After done my J2ee add-in installation into ABAP ECC5 system, my central services instance was started successfully.
And i could connect to Visual administrator with J2ee_admin user.
In log "dev_disp" located in /usr/sap/<instance>/work directory" as shown attached below, my j2ee server was start successfully
http://img2.freeimagehosting.net/uploads/8c9694a7cc.jpg
However, I couldn't access J2ee Administrator tool in Web browser with the following URL as I pretty ensured that correct parameters was inserts.
HTTP://<hostname>:<port>
http://img2.freeimagehosting.net/uploads/1bafe7a701.jpg
Please guide me regarding this issue.
Thousand thanks.
Terry
Edited by: Tow Terry on Apr 22, 2008 1:46 PM

dev_dispatcher logs
[Thr 1473899440] Fri Apr 25 18:00:53 2008
[Thr 1473899440] JLaunchISetHttpPort: set http port 50000
[Thr 1446415280] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
[Thr 1505602480] Fri Apr 25 18:00:58 2008
[Thr 1505602480] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 1490279344] Fri Apr 25 18:01:01 2008
[Thr 1490279344] JLaunchISetP4Port: set p4 port 50004
[Thr 1463331760] JLaunchISetP4Port: set p4 port 50004
[Thr 1500847024] JLaunchISetP4Port: set p4 port 50004
[Thr 1498733488] Fri Apr 25 18:01:22 2008
[Thr 1498733488] JLaunchISetP4Port: set p4 port 50004
[Thr 1507187632] Fri Apr 25 18:01:44 2008
[Thr 1507187632] JLaunchISetHttpPort: set http port 50000
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
SMICM details
HTTP Application Server Handler
ABAP Server operational        = TRUE
J2EE Server configured         = TRUE
J2EE HTTP port                 = 50000
J2EE HTTPS port                = 50001
J2EE Server operational        = TRUE
Default root access handler    = J2EE
URL Prefix Table loaded        = TRUE
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
my j2ee engine was up and running as I can log on to visual administrator.
However, i still couldn't access http://localhost:50000 web j2ee application.
Is that we need to configured somethings before access to web application?
Thanks

Failed to login via Internet Explorer 8 in Oracle Secure Backup

I cannot login via explorer 8. when i enter admin as user name and my password. It returns to the same page (LOGIN Page).

When you go to the login page or log out it removes (or attempts to)
any previous cookies and recreates new cookies. I have been having a
problem with Internet Explorer 8 where it seems to be returning
something to my site that Coldfusion can't handle. I get
java.lang.nullPointerException. The error messages say the error
occurs either at line -1, with no idea what tag is involved, or line 6,
which is in the middle of my cfapplication tag. The diagnostics line
is always null other than the line number. From that, though, the
error seems to occur before my cfapplication tag even runs.
That suggests to me that the previous cookie is removed, but no new cookie is being created. The null would therefore refer to the non-existent cookie object. One way out might be to create new cookies without attempting to remove previous ones.

Administration tool read only access

I was wondering if there is a read only access to the administration tool.
What i am trying to do is to test the repository Build with best practices since this repository is live and done by a group of developers -
Since i joined recently and wanted to know what resources i need to get to view and test the repository.
I was wondering if there is a read only access to admin tool , not sure about this and also do i need oracle BI installed on my local machine to view the repository.
If not ,is there a way where i can get to see the repository without having the priviledges to do any modification or save changes to the repositoryin online or offline mode
Thanks Deva ...
Edited by: UOOLK on 01-Jun-2012 02:48

Hi,
If you want to switch your RPD read only mode to online/Offline mode
try to re start your bi server and then try to access it RPD (online/offline mode)
Setting rpd in read only mode:
users wants to access the RPD in online mode then do below setting in NQSConfig.ini but this will refrain u developers as well to do any change in online mode...
Refer Section: READ_ONLY_MODE
http://download.oracle.com/docs/cd/E12096_01/books/AnyInConfig/AnyInConfigNQSConfigFileRef11.html
otherwise you can give it copy of RPD(he can access it via offline mode)
if your using obiee11g,
Read-Only issues on a new install of OBIEE 11g:(always opens it in Read-Only mode)
Login to Oracle Enterprise Manager Goto -> Business Intelligence -> coreapplication
Click - Capicity Managment Tab in Right side -> Performance -> Check Disable Disallow Online RPD Updates
Thanks
Deva
Edited by: Devarasu on Jun 1, 2012 6:01 PM

Administrative Tools is showing 2 IIS, one is IIS6 and IIS7 which may be causing Central Administration not to be retrieved

Hello Community
    I reinstalled Sharepoint 2010 and SQL Server 2008R Evalution 64bit edition
on a member server running Windows 2008 on Windows Server Enterprise Service Pack 2.
    Then I click the "Sharepoint 2010 Central Administration"
    The first error I got was something to the effect that:
"The IIS Admin Service" service failed to start because a privilege that the service
requires does not exist in the service account configuration run Local Security Settings
MMC."
    So I changed all of the service accounts to run under the domain admin account
except IIS Admin because it would only work under either the Local Account or Network
Service so I ran it under Network Service.
    The error message I got after that was similar so I added "Create Global Policy"
to the group that the domain administrator account and services is in.
    After that I didn't get the error message instead in the address bar I
saw http:\\<machine name>:port number\
    But the page below was blank.
    I went to Administrative Tools and discovered I have two IIS items:
#1-Internet Information Services (IIS) 6.0 Manager
#2-Internet Information Services (IIS) Manager
    #1 is blank: Internet Information Services (IIS) 6.0 Manager
    #2 is "IIS 7": Internet Information Services (IIS) Manager
so I double clicked Sharepoint Central Administration v4 and clicked the Security Tab
and added the group with the domain admin account and gave it full control. I also
enabled the following:
Anonymous authentication
AsP.Net Impersonation
Basic authentication
Digest authentication
Forms authentication
Windows authentication
    Then I click the "Sharepoint 2010 Central Administration" again and
then I saw http:\\<machine name>:port number\login.aspx?ReturnUrl=%2f in the address bar and
on the page I saw HTTP 404 Not Found.
    I think Sharepoint 2010 uses the 14 hive but since I just installed it I don't know what pages
should appear so I am at a lost at this point.
    What can I do to make the Central Administration page appear?
    Thank you
    Shabeaut

Hello Daniel
    Okay, actually I have tried to do this perfectly but after
failing initially I have probably been trying anything that came
to my mind. So let me explain my initial effort:
    I used a domain admin account and logged on locally with that account to
member server to install Sharepoint 2010. Then like you say, I ran the
product configuration wizard to create the farm and Central Administration
site. A Central Administration site was created that I can see in IIS7.
    I don't remember clicking "Basic Settings" or "Test Setting" but I do
remember clicking "Authentication" and I think I saw 5 or 6 types of authentication
but only 2 were enabled so I enable the other 3 or 4 and think they were:
Anonymous authentication
AsP.Net Impersonation
Basic authentication
Digest authentication
Forms authentication
Windows authentication
    After all of this when I clicked "Central Administration" from
the "Start Menu" I would get prompted 3 times for a password and then just get
<machine name:port number> in the address bar with a blank screen.
    After repeating all of these steps over and over again I decided to just
install WSS 3.0 and upgrade that working WSS 3.0 into Sharepoint 2010. But the
problem is I don't know how to perform that type of upgrade.
    But now I want to answer your question because you seem to know where I went
wrong so I am going to reinstall Sharepoint 2010 up to the point where I can answer
your question of:
"If you select the web site and from the actions pain choose Basic Settings, then click Test settings, what is the result?"
and
"What authentication is enabled if you open Authentication under IIS in the central pane?"
    My only questions are what is supposed to be the results after choosing
"Basic Settings" and "Test Setting" and which of the Authentications should be
enabled and after I set them to what you say, should I then get the Central
Administration page when I click "Central Administration" from the start menu?
    Thank you
    Shabeaut

Remote login in SM51 Fails / ECC 6.0 / HP-UX / Oracle 10

Hi All,
We had a cluster, 4 physical servers / 14 SAP Instances / HP-UX - Oracle 10G / ECC 6 EHP 3.
Basically we have a general RFC problem in the system. You can reproduce it simply in transaction sm51: In most of the instances whenever you try to change to an instance that has the same instance number than the one you are logged on at this moment, you will come back to this instance, e.g.:
you are logged on at host1_SID_01, start sm51 and try to change to the instances:
host2_SID_01,
host3_SID_01 or
host4_SID_01
(or you try to display the system log or other). You will see (System - Status) that you don't change to these instances but will stay on host1_SID_01.
We found the SAP Note 662895 - Remote login using SM51 Fails. In this note they refer to the error: "Transaction termination 14 025".
Now we have this error (we upgraded from SAP 46C with another error in sm21).
The problem is that we really donu2019t understand exactly what they want to do in the SAP Note 662895:
Summary
Symptom
Remote login in SM51 by double-clicking R/3 instances fails
Solution
You can use transaction SM51 to log in to another application server using RFC, without entering a password. Server "A"
Server "A"                                          Server "B"
        <--Remote logon via RFC   <--
GUI
      sm51
Double-click on the server B entry --->
If host name "B" was entered on server "A" as the gw/alternative_hostnames profile parameter, the local SAP gateway from server "A" is used when you log on to server "B". This results in the syslog message "Transaction termination 14 025".
The same error occurs if you try to open a new external mode on server "A".
Who is the origin server? Host A? Host B? In fact sometimes you can go from A to B and vice versa. So changing the gw/alternative_hostnames parameter doesn't appear to be a solution.
I would appreciate some tips about this Note / Problem.
Best Regards,
Erick Ilarraza

Hello, thanks a lot for your replyes.
Abhijeet Siras, the command /etc/ping <host> works prefectly.
Sergo,
Exactly we have 3 host each one with 4 dialog instances. 1 host with 2 dialog instances and one host with the central instance.
Not all instances have this problem, only the following combination:
     Origin                     Destination
host4_SID_01    - >     host1_SID_01
host2_SID_03    - >      host3_SID_03
host1_SID_01    --> host3_SID_01
host1_SID_02   -->     host3_SID_02
host1_SID_03   -->     host3_SID_03
host1_SID_04   -->     host3_SID_04
host2_SID_01   -->     host3_SID_01
host2_SID_02 -->     host3_SID_02
host2_SID_03 -->     host3_SID_03
host2_SID_04 -->     host1_SID_04
host2_SID_04 -->     host3_SID_04
host3_SID_04 -->     host1_SID_04
host4_SID_01 -->     host1_SID_01
host4_SID_02 -->     host1_SID_02
host4_SID_02 -->     host2_SID_02
host4_SID_02 -->     host3_SID_02
The problem is between *_NUMBER to *_NUMBER!
For example from Dialog Instance 3 running on host 2 to Dialog Instance 3 running on host 3
For example host4_SID_01 means the Dialog Instance 1 running on host 4.
Best Regards,
Erick Ilarraza

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insight

Found the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.

CUE 8.5.1 NME-CUE web page setup no setup initialization and error: Login to CUCME failed

When first login in via the web page. When going to Configure menu and choosing CUCME to enter it manually, I get:
Error: Login to CUCME failed with the new values. Check the new CUCME configuration and enter the correct values.
hostname: 172.23.0.1
web user name: admin
web password: cisco
Sip gateway hostname: 172.23.0.1
ccn reporting historical
database local
description "se-172-23-0-2"
end reporting
ccn subsystem sip
gateway address "172.23.0.1"
mwi sip unsolicited
end subsystem
BR2-ROUTER#sh run
Building configuration...
Current configuration : 5264 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname BR2-ROUTER
boot-start-marker
boot-end-marker
card type t1 0 3
logging message-counter syslog
logging buffered 51200 warnings
no aaa new-model
clock timezone MST -7
clock summer-time MDT recurring
network-clock-participate wic 3
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.21.0.1 172.21.0.49
ip dhcp excluded-address 172.21.0.59 172.21.0.254
ip dhcp excluded-address 172.20.0.1 172.20.0.10
ip dhcp pool CME
   network 172.21.0.0 255.255.255.0
   option 150 ip 172.21.0.1
   default-router 172.21.0.1
ip dhcp pool LAPTOPS
   network 172.20.0.0 255.255.255.0
   default-router 172.20.0.2
   dns-server 10.10.10.1
no ip domain lookup
ip domain name wilson.com
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h225-notify cid-update
sip
bind control source-interface GigabitEthernet0/0.20
bind media source-interface GigabitEthernet0/0.20
registrar server expires max 600 min 60
voice register global
mode cme
source-address 172.21.0.1 port 5060
max-dn 4
max-pool 4
authenticate register
timezone 12
time-format 24
date-format YY-M-D
voicemail 3600
tftp-path flash:
create profile sync 0021447056000116
ntp-server 174.137.67.50 mode directedbroadcast
voice register dn 1
number 3006
call-forward b2bua busy 3600
call-forward b2bua mailbox 3006
call-forward b2bua noan 3600 timeout 12
name rp-sip-1-16
label SIP 511-5016
mwi
voice register pool 1
id mac FCFB.FBCA.30CE
type 7965
number 1 dn 1
dtmf-relay rtp-nte
username 3006 password cisco
description 687-3006
codec g711ulaw
voice-card 0
username admin privilege 15 secret 5 $1$..D.$orbTsqgPSvNkMpfjjkg5q.
archive
log config
hidekeys
controller T1 0/3/0
cablelength long 0db
controller T1 0/3/1
cablelength long 0db
interface Loopback0
ip address 172.23.0.1 255.255.255.252
ip ospf network point-to-point
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0.10
encapsulation dot1Q 10 native
ip address 172.20.0.2 255.255.255.0
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 172.21.0.1 255.255.255.0
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 172.22.0.1 255.255.255.0
interface GigabitEthernet0/1
ip address 192.168.1.138 255.255.252.0
duplex auto
speed auto
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 172.23.0.2 255.255.255.252
service-module ip default-gateway 172.23.0.1
no keepalive
ip forward-protocol nd
ip route 172.23.0.2 255.255.255.255 Integrated-Service-Engine1/0
ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:/gui
access-list 23 permit 10.10.10.0 0.0.0.7
nls resp-timeout 1
cpd cr-id 1
control-plane
ccm-manager fax protocol cisco
mgcp fax t38 ecm
dial-peer voice 3600 voip
destination-pattern 36..
session protocol sipv2
session target ipv4:192.168.1.144
dtmf-relay sip-notify
codec g711ulaw
no vad
sip-ua
retry invite 3
timers trying 400
mwi-server ipv4:192.168.1.144 expires 3600 port 5060 transport udp
gatekeeper
shutdown
telephony-service
no auto-reg-ephone
em logout 0:0 0:0 0:0
max-ephones 10
max-dn 10 no-reg both
ip source-address 172.23.0.1 port 2000
voicemail 3600
max-conferences 8 gain -6
call-forward pattern .T
web admin system name admin password cisco
dn-webedit
transfer-system full-consult
transfer-pattern .T
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 1
number 3007
description 687-9898-3007
name Vatos locos
call-forward busy 3600
call-forward noan 3600 timeout 12
ephone-dn 2
number 3008
description 687-9898-3008
name Vatos locos2
call-forward busy 3600
call-forward noan 3600 timeout 12
ephone-dn 3 octo-line
number 3009
huntstop channel 6
ephone-dn 4
number 7999....
mwi on
ephone-dn 5
number 7998....
mwi off
ephone 1
device-security-mode none
description TESTTTTT
mac-address FCFB.FBCA.3406
max-calls-per-button 5
busy-trigger-per-button 4
type 7965
button 1:1 2:3
ephone 2
device-security-mode none
description TESTTTTT
mac-address FCFB.FBCA.3030
max-calls-per-button 4
busy-trigger-per-button 3
type 7965
button 1:2 2:3
line con 0
exec-timeout 0 0
logging synchronous
login local
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet
scheduler allocate 20000 1000
ntp server 174.137.67.50
end
BR2-ROUTER#
Apr 12 2011 16:23:12 gui/admin_user.js
122     585532 Mar 30 2011 05:48:46 phone/7975/cnu75.8-3-2-27.sbn
123    2453636 Mar 30 2011 05:48:56 phone/7975/cvm75sccp.8-3-2-27.sbn
124     326315 Mar 30 2011 05:48:58 phone/7975/dsp75.8-3-2-27.sbn
125     557786 Mar 30 2011 05:49:00 phone/7975/jar75sccp.8-3-2-27.sbn
126        638 Mar 30 2011 05:49:02 phone/7975/SCCP75.8-3-3S.loads
127        642 Mar 30 2011 05:49:02 phone/7975/term75.default.loads
128          0 Mar 30 2011 05:49:02 phone/7941-7961
129    2494499 Mar 30 2011 05:49:12 phone/7941-7961/apps41.8-3-2-27.sbn
130     547146 Mar 30 2011 05:49:16 phone/7941-7961/cnu41.8-3-2-27.sbn
131       2340 Apr 02 2011 03:55:02 April012011.txt
132       3579 Apr 12 2011 03:52:42 softkeyDefault_kpml.xml
133         69 Apr 12 2011 03:52:40 syncinfo.xml
134       2682 Apr 12 2011 03:52:42 SEPFCFBFBCA30CE.cnf.xml
135       1882 Apr 12 2011 03:52:42 SIPDefault.cnf
136       3613 Apr 12 2011 03:52:42 softkeyDefault.xml
137       3987 Apr 12 2011 16:23:10 gui/admin_user.html
138       1029 Apr 12 2011 16:23:14 gui/CiscoLogo.gif
139        617 Apr 12 2011 16:23:14 gui/CME_GUI_README.TXT
140        953 Apr 12 2011 16:23:14 gui/Delete.gif
141      16344 Apr 12 2011 16:23:14 gui/dom.js
142        864 Apr 12 2011 16:23:16 gui/downarrow.gif
143       6146 Apr 12 2011 16:23:16 gui/ephone_admin.html
144       4558 Apr 12 2011 16:23:16 gui/logohome.gif
145       3866 Apr 12 2011 16:23:16 gui/normal_user.html
146      78428 Apr 12 2011 16:23:18 gui/normal_user.js
147       1347 Apr 12 2011 16:23:18 gui/Plus.gif
148        843 Apr 12 2011 16:23:18 gui/sxiconad.gif
149        174 Apr 12 2011 16:23:18 gui/Tab.gif
150       2431 Apr 12 2011 16:23:20 gui/telephony_service.html
151        870 Apr 12 2011 16:23:20 gui/uparrow.gif
152       9968 Apr 12 2011 16:23:20 gui/xml-test.html
153       3412 Apr 12 2011 16:23:20 gui/xml.template

Fixed. Routing issue:
Routing issue:
ip http access-class 23 !!!!!! Preconfigured from Factory
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:/gui
access-list 23 permit 10.10.10.0 0.0.0.7 !!!!!! Preconfigured from Factory
To fix
No ip http access-class 23

Problem with opening repository in Administration Tool

Hello!
I have a problem when I want to open saved repository in Administration Tool.
I've saved uncompleted repository (without Presentation Layer) in offline mode (BI Server was stopped all the time) and then I've closed A. Tool.
BI Server was stopped all the time.
And now when I want to open my saved repository in offline mode, A. Tool asked me password of user Administrator. I typed password but logon failed. I am sure that password is correct because when I try to open another repositoy with the same user and password, repository will open.
What can I do to open my repository?
Thnx!

What can I do to open my repository?Type the correct Administrator password. Otherwise try with another RPD user which is also memger of the Administrators group.

Administrator API: Login to specific instance with username, password

1) How do I login to a specific instance of ColdFusion administrator with a username and password. The example I see everywhere is variations of:
adminObj = createObject("component","cfide.adminapi.administrator");
adminObj.login("password");
which appears to be based on no instances and not multiple administrators.
my goal is to log into a set of instances and assign datasources to each of them based on a csv file. I know how to do all that once logged in.
What I don't know how to do is log in!
Please help!
2) Is there an actual document anywhere that actually documents the administrator API? I have the help files that I suspect everyone has and they don't.
Thank you.

The way I did it was to create a directory under the cfide folder in a given instance and called the pages via http://server.blah.com:8301/cfide/blah/admin.cfm
Here's some example code of creating a datasource (I don't recall where I grabbed it from, it isn't mine - but it does work).

<cfset administratorService = CreateObject("component","CFIDE.adminapi.administrator")>
<cfset bIsLoggedIn = administratorService.Login(dsnpassword,dsnuser)>
<cfif bIsLoggedIn>
   <cfset datasourceService = createObject("component", "CFIDE.adminapi.datasource")>
   
   <cfif datasourceService.VerifyDSN(#dsName#) eq false>
      <cfset stArgs = StructNew()>
      <cfset stArgs.name = #dsName#>
      <cfset stArgs.database = #dbName#>
      <cfset stArgs.host = #dbServer#>
      <cfset stArgs.port = 1433>
      <cfset stArgs.driver = mssql>
      <cfset stArgs.selectmethod = datasource_selectmethod>
      <cfset stArgs.username = dbuser>
      <cfset stArgs.password = dbpassword>
      
      <cfset datasourceService.SetMSSQL(argumentCollection=stArgs)>
   </cfif>
</cfif> --->

Administration Tool login via 10817 failed

Similar Messages

Maybe you are looking for