Administrative credentials when adding a WEP/WPA/WPA2 Enterprise wifi profile?

Hello,
Why do users need to provide administrative credentials when they install a configuration profile containing installation of a WEP Enterprise or WPA/WPA2 Enterprise Wifi-profile? This is not the case when installing a Wifi-profile usning standad WEP, WPA or WPA2.
Is this a bug? It confuses users with user profiles when they need to confirm the installation with administrative credentials.

I don't know the answer to your question. Maybe you can find something here:
http://training.apple.com/pdf/WP_8021X_Authentication.pdf

Similar Messages

HT4718 would i be able to use the lion internet recovery since my college uses WPA/WPA2 Enterprise wifi?

would i be able to use the lion internet recovery since my college uses WPA/WPA2 Enterprise wifi? Im confused becasue this exact one is not listed under apples page about os x recovery.

Probably not. You'd need to go somewhere that Internet isn't on a locked-down wireless network.
See this for specifics. "It depends."
http://support.apple.com/kb/HT4718

WPA/WPA2 Enterprise Support - Please Apple PLEASE!

I have been searching through this discussion board and I have found many discussions like this one.
http://discussions.apple.com/thread.jspa?threadID=1106197&tstart=0
People who complain of not being prompted for a Username and Password for WiFi access are complaining of lack of WPA/WPA2 Enterprise Support for Apple's iPhone. Many college campuses, major workplaces and public libraries use WPA/WPA2 Enterprise support, which prompt you for a Username AND Password.
Why doesn't Apple's iPhone support one of the most common WiFi protocal's in today's world?
If Apple doesn't implement WPA/WPA2 Enterprise support, many people are going to look for alternative ways to connecting to a WPA/WPA2 Enterprise WiFi network with their iPhones. Example: hacking their iPhone and using a risky 3rd party application.
I STRONGLY recommend to Apple to get on this as soon as possible...
Does anyone know if Apple is working on this currently?
Thank You!

This is a user to user help forum only so no one here knows what Apple is working on.
http://www.apple.com/feedback/iphone.html

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.
Thanks for your help!

Choose the strongest security available on your router, preferably WPA2 using AES encryption and a long complex passphrase with at least 14 characters (the maximum is 63 characters).

Connecting to WPA/WPA2-Enterprised network

hi all,
i just came to mcgill and was trying to connect to the school network. But it kept saying something like 'authorization failed'. School website has only instructions for BlackBerrys:
"Select wpa.mcgill.ca * (WPA/WPA2-Enterprise). Fill in the following fields:
Name: wpa.mcgill.ca *
SSID: wpa.mcgill.ca *
Security Type: PEAP
User Name: McGill Username
User password: McGill Password
CA Certificate: Thawte Premium Server CA
Inner Link Security: EAP-MS-CHAP V2
Token: None Selected
Server subject: blank
Server San: blank "
Help plz
Solved!
Go to Solution.

idecline wrote:
hi all,
i just came to mcgill and was trying to connect to the school network. But it kept saying something like 'authorization failed'. School website has only instructions for BlackBerrys:
"Select wpa.mcgill.ca * (WPA/WPA2-Enterprise). Fill in the following fields:
Name: wpa.mcgill.ca *
SSID: wpa.mcgill.ca *
Security Type: PEAP
User Name: McGill Username
User password: McGill Password
CA Certificate: Thawte Premium Server CA
Inner Link Security: EAP-MS-CHAP V2
Token: None Selected
Server subject: blank
Server San: blank "
Help plz
Try configuring your N97 with these instructions:
Since your WLAN network seems to require more advanced PEAP authentication settings you should probably create / edit appriate WLAN connection profile, known as (Internet) Access Point, manually in a following manner:
1. Go to Tools -> Settings -> Connection -> Network Destinations
2. Check if your earlier failed attempt to connect has already created an non-funtional IAP named as your WLAN network SSID (look for a entry named wpa.mcgill.ca) under "Internet" destination.
3. If you can see existing IAP named as your WLAN SSID then you can Edit that one with necessary changes. (skip to 7.)
4. If you don't see any existing IAPs that are named like your WLAN network then go to the desired "Destination" (e.g. Internet) and select Options -> Add Connection Method.
5. Assuming you are in the coverage area of your WLAN network you can let phone "Automatically check for connection methods" (i.e. phone scans available WLAN networks) and you should be able to select the correct WLAN network name (wpa.mcgill.ca) from the list. Once you have selected the WLAN network your "Internet" Destination should now have been added with a new Access Point (IAP) that is named "wpa.mcgill.ca". Note that at this point the particular connection method is still incorrectly configured for your purposes (since by defaul it has EAP-SIM & EAP-AKA authentication methods enabled).
6. Now you should manually Edit your newly created wpa.mcgill.ca Internet Access Point with necessary PEAP settings.
7. Configure following WLAN and authentication settings:
"Connection name" defaults to name of your WLAN network (wpa.mcgill.ca) but you can also change this if you wish
- "Data Bearer" naturally needs to be "Wireless LAN"
- "WLAN network name" should match your WLAN network's name (SSID) exactly (wpa.mcgill.ca)
- "Network status": Public
- "WLAN network mode": Infrastructure
- "WLAN Security mode": WPA/WPA2
=> Go to "WLAN security settings"
- Ensure that "WPA/WPA2 mode is set to "EAP"
- Leave "WPA-2 Only mode" to "OFF" unless you are absolutely sure that your WLAN network is configured to stricly pure WPA2 mode (i.e. network might be configured to support both WPA and WPA2 security thus enabling WPA-2 Only mode on the phone will cause all your connection attempts to fail).
=> Go to "EAP plug-in configuration"
- Enable "EAP-PEAP" and make sure that "EAP-SIM" and "EAP-AKA" are disabled (via Options -> Disable)
=> Select "Configure" for EAP-PEAP authentication method
- Leave "Personal Certificate" to "Not defined"
- Select "Thawte Premium Server CA" to be used as an "Authority certificate"
- Set "User name in use" to "User defined" (since there is no Personal Certificate where it could be read automatically)
- Enter your username (McGill Username) to "Username" field
- Set "Realm in use" to "User defined" and leave following "Realm" field empty.
- Note that in case your username (McGill Username) contains the realm (i.e. format is username@realm ) then you can enter realm part of your ID to "Realm" field and enter only the username part to the "Username" field.
- Configure "Allow PEAPv0" to Yes
- Configure both "Allow PEAPv1" and "Allow PEAPv2" to "No"
=> Go to "EAP's" tab to configure inner authentication method for the PEAP (use the small arrow pointing right on top of the screen to move between tabs)
- Enable "EAP-MSCHAPv2" authentication method and Disable all other methods (Option -> Enable / Disable)
- Select "Edit" for the EAP-MSCHAPv2
- Enter you username (McGill Username) to "User name" field
- Configure "Prompt password" to No or Yes depending on whether you want your password to be prompted everytime you make an connection or if you prefer saving your password to following "Password" field permanenly so that it won't be prompted during everytime you connect to this WLAN network with PEAP/EAP-MSCHAPv2 authentication.
- If you you selected "No" to password prompting then enter your password (McGill Password) to "Password" field.
=> Exit the configuration with "Back" (several times) and you should hopefully be able to connect with this setup.
If needed you can also change the priority order of the connection methods (IAP's) within the Internet Destination since your new connection most likely ended up being lowest priority WLAN connection within your Internet destination. This should however not be a problem unless you have some other WLAN networks defined as an IAP and these other WLAN networks are simultaneously available at the location of the wpa.mcgill.ca WLAN network.
Hope this helps you to get connected!!
Message Edited by saataja on 17-Sep-2009 05:16 PM

IOS 5 can't connect to WPA/WPA2 Enterprise Wireless Network

After upgrading multiple iPhone 4 (CDMA versions) to IOS 5.0, I have not been able to get them to connect to our WPA/WPA2 Enterprise wirless network. We use a Cisco Wireless LAN Controller. The wireless network is capable of doing WPA or WPA2 Enterprise with PEAP. These phones all connected to this network fine before the upgrade.
When connecteding to the network, it prompts me for the username and password and when I tap join it sits for about 10-15 seconds then says "Unable to join the network" with a Dismiss button.
It connects to non-Enterprise networks just fine. I have tested it on WPA Personal and WPA2 Personal networks and it has worked on several without issue.
I have tried "forget this network" with no success.
Is anyone else having this problem? I know of at least three Verizon iPhone 4's that have this exact same problem. I haven't seen one working with this configuration yet.

I have the same problem:
Cisco WLC's -> WPA2 Enterprise AES + EAP-PEAP 802.1x with CCKM
Pre 5.0 - all worked fine
Post 5.0 - it tries to connect and after few moments i get error - couldn't connect.
Info from controller:
10/17/2011 12:16:37 CEST           INFO           172.16.16.X           Sending EAP request to client from radius server. 6.f. ..l
10/17/2011 12:16:38 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:39 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           Authentication failed for client as EAP ID request from AP reached maxmium retransmissions. 5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           De-authentication sent to client. 5.oP ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           EAPOL-key is invalid, scheduling client for deletion. 5.yp ..l
On the Radius server i don't see any activity regarding this device.
I had this network configured on my iPhone - after upgrade and restore it remembered it. Every time i was in vicinity of my Enterprise WLAN it tried to connect - resulting int express battery drain - 6-7 hrs and battery was empty from 100%

Free RADIUS/802.1X Service for WPA/WPA2-Enterprise

Hi, just wanted to let everyone know that I recently started offering a Free Edition of our AuthenticateMyWiFi service, a hosted RADIUS/AAA service offering 802.1X authentication for use with WPA/WPA2-Enterprise encryption.
The Free Edition features 1 user account, supports 1 AP, and includes: PEAP authentication for wireless and wired connections, web-based control panel, and activity logging.
This is great for IT professionals wanting to experiment with 802.1X or to get enterprise Wi-Fi security in homes and small offices.
For more info visit our site:
http://www.nowiressecurity.com/service.htm
- Eric Geier

I recommend contacting Linksys support on the phone and ask them which model router has Radius or Enterprise WPA features. Some home class routers may not have this. Ask and see what is available.

Mac cannot find WPA-2 enterprise wifi when updated to Mavericks

My MacBook air cannot find WPA-2 enterprise wifi on the network list when updated to Mavericks, but I can add the network by choosing "joining other network" and typing username and password manually. Anyone knows how to solve this problem?

Hi everybody,
I'm having your same problems connecting to my Wi-Fi, which worked perfectly since this morning when I upgraded this Macbook, bought at the end of 2008 (actually quite old )
Wireless connect to the router and lease for the IP correctly, but after that show the ! icon and doesn't surf on the Internet...Diagnose Wireless checks everything but the problem still occur.
I sincerely hope they will fix this issue as soon as possible!

Wifi w/WPA/WPA2 Enterprise

I have a strange issue. We are trying to connect iPhones to the corporate wifi network. This uses WPA/WPA2 Enterprise encryption with EAP-FAST authentication. I have created a Wifi Configuration Profile using the iPhone Config Utility v3.3. All settings look correct.
I install this config profile to an iPhone 4 and it cannot connect.
I install this same config profile to iPod Touch 2G and it does not connect.
I install this same config to iPad2 and it works perfectly fine. Connects every time no problem.
Apparently there is some difference in how the devices handle wifi security?!?
Does anyone have any insight into this?

Is the wireless network an "n" network?
If so, the iPhone 4 supports 802.11b/g/n Wi-Fi (802.11n 2.4GHz only).
No such 2.4GHz only requirement for an "n" network with the iPad.

Nokia 808 WPA/WPA2 secured wifi problems

I have a nokia 808 pureview with BELLE FP2. However i am not able to connect to WPA/WPA2 secured wifi connection in my college. It should ask for a username and password for authentication but it simply tries to connect automatically and does not connect saying authenticaton failed. Please help me over the issue.

try this out to see if it helps you: http://betalabs.nokia.com/trials/wlan-software-update

Connecting to WPA/WPA2 Enterprise Network

I am trying to configure an Apple TV to connect to our corporate network. I have a service account in AD that I am using in the profile, have pointed to our cert and trusted it in the profile, selected WPA/WPA2 Enterprise, and selected PEAP as the 802.1X authentication. I have done this after going over the settings with our network security engineer. Everything looks correct. After installing the profile and connecting it to the TV, I can only get a 169.X.X.X address (should be our private WiFi network of 10.9.X.X. Has anyone successfuly done this?

This is a user to user help forum only so no one here knows what Apple is working on.
http://www.apple.com/feedback/iphone.html

Support for WPA-Enterprise, WPA2-Enterprise wifi s...

hi all
I try to connect my phone to corporate wifi but failed because the phones hangs. my company uses WPA2-Enterprise wifi. my phone clearly works with WPA2-Personal wifi security at home. will these profiles of security be supported in future update?

Although this is the right section for this question, let us continue with your original post …

10.4.8: Airport busy-loops when in range of a WPA2 Enterprise network

After installing the 10.4.8 upgrade, the airport process hangs at 100% CPU when within range of a network secured with WPA2 Enterprise. The solution has been to kill it via "Activity Monitor". Everythin works fine with a normal WEP network.
The workaround has been to turn airport off before entering the office. Forgetting to can completely disable login. The machine just hangs, without accepting keyboard input for the password. The mouse pointer (that delightful beach ball) moves, though.
Anyone have suggestions as to how this may be fixed?
MacBook Pro 15" Mac OS X (10.4.8)

And, yes, I have tried that "remove & add back to preferred networks"-thing.

Unable to Connect to WPA/WPA2-Enterprised network

I work for a private company, and we have a WPA-Enterprised network. Company provide following settings for Blackberry users.
Name : IxWLANP
SSID: IxWLANP
Band Type: 802.11 b/g
User Name :
Password:
CA Certificate: None Selected
Interlink Security : EAP-MS-CHAPV2
Token: None
Select Disable Server Certificate.
What I have configured for my Nokia E72 is as follows:
Connection Name: IxWLANP
Data Bearer: Wireless LAN
WLAN Network Name :IxWLANP
Network Status: Public
WLAN Network Mode: Infrastructure
WLAN Security Mode : WPA/WPA2
Under WLAN Security Settings
WPA/WPA2: EAP
Under Plug-in settings:
EAP-PEAP only selected
Under EAP-PEAP edit mode:
Personal Certificate: Not defined
Authority Certificate: Not Defined
User Name In US: User Defined
User Name: ******* (My User Name)
Realm In Use: User Defined
Realm: Blank
TLS Privacy: OFF
Allow PEAPv0 : yes
Allow PEAPv1 :No
Allow PEAPv2 : No
Under EAPs: EAP-MSCHAPv2 Selected
User Name: (My USer name)
Prompt password: No
Password : (My Password.)
No change in ciphering
WPA2 only modeff
This is all I have done.
Network is showing as known network. But If I am trying to connect to any web page its saying EAP-PEAP authentication Failed.
Blackberry/ Samsung/ Apple works fine. This problem is only with nokia. Please reply urgently.
Please help.

I have also a problem to connect my E72 to my company network.
The settings are:
Network Authentication: WPA2
Data Encryption: AES
Authentication Type: Protected EAP (PEAP)
Authentication Protocol EAP-MSCHAPV2
HAve someone of you an idea or what I have to do that it works?
Please help. Thank you.
Argisch

IOS 5 WPA2 Enterprise WiFi Connectivity Issue

In IOS 4 i was able to connect easy to my company Enterprise network using WPA2 Enterprise (With Domain username and password). While initail Wifi setup in IOS 4 it used to ask me for accepting a certificate. After upgrading i noticed that it does not ask for certificate anymore but still connects on first attempt. After turining wifi off and on Wifi does not connects automatically instead if i check that network it ask me to enter password and join (my company network does not use preshared key instead use Domain credentials).
After googling i found out that from iOS 5 onward MD-5 signed certificates are no more supported. My network administrator is not interested in changing the signing method of certificate.
Can any one please help me for fixing this issue?

Hi Attiq 123,
Thanks for the question. It sounds like you are experiencing issues with your network connection, specifically when connecting to Apple services like iCloud and the iTunes Store. The following resource provides some troubleshooting steps that you can try:
Can't connect to the iTunes Store - Apple Support
http://support.apple.com/en-us/HT201400
You may also need to test to see if the specific ports on your Wi-Fi network are accessible:
iTunes: Advanced iTunes Store troubleshooting - Apple Support
http://support.apple.com/en-us/TS3297
Make sure the issue is with the iTunes Store only. (You need an Internet connection to access the iTunes Store).
Open a secure website to test if you are online as is necessary for the iTunes Store. This also tests if the main ports 80 and 443 are accessible. If the website works but the iTunes Store does not, it is most likely a firewall blocking the iTunes software or servers. If this is the case, follow the steps in the "Blocked by software firewall" section below.
- Matt M.

Administrative credentials when adding a WEP/WPA/WPA2 Enterprise wifi profile?

Similar Messages

Maybe you are looking for