Administrative limit exceeded error
On attempting an ldap search command as follows ./ldapsearch -z1000 -b "ou=People,o=abcd.com" "organizationalstatus=manager", I am getting "Administrative limit exceeded" error. The limit is set to 2000 in the console. any help is appreciated. Thanks
hello,
"Administrative limit " may be a SIZE limit , ENTRIES ( number of ) limit or SIZE ( output of ) limit:
From "man" of ldapsearch:
-l timelim time limit (in seconds) for search (default is no limit)
-z sizelim size limit (in entries) for search (default is no limit)
You can use these options when you search.
You may also check the setting of 3 limits above with Admin Console:
Open your directory server (name), Configuration Folder, Performance. On right panel check Client Control folder. You may see:
Size limit
Look-through limit
Time limit
Idle timeout
� The look-through limit specifies the maximum number of entries that will be examined for a search operation.
� The size limit specifies the maximum number of entries the server returns to the client application in response to a search operation.
� The time limit specifies the maximum time the server spends processing a search operation.
� The idle timeout specifies the time a client connection to the server can be idle before the server drops the connection.
If you bind as Directory manager, you may use unlimited resources by default.
Hello,
silvio
Similar Messages
-
Error opening file/URL reference by alias and Administrative limit exceeded
Hello All,
Problem:
SMTP Error: 4.5.0 error opening file/URL reference by alias
and
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
Here is my configuration:
Windows 2000 server (without Active Directory)
SP4
Iplanet Messaging Server 5.2
Netscape Directory Server 4.16
IPlanet Messaging Server 5.2 Hotfix 1.09 (built Jan 7 2003)
We have a group which we use to flash messages to all the users of the mail server. Till last week it was working fine but now I am not able to send messages to this group <group-name>.
There are around 800 (Eight Hundred) E-mail id the messaging server and the flashed message is supposed to go to all 800 + users.
Note: I have another group of 300 users and I am able to send an E-mail to this group of 300 users.
I am using Dynamic Group for Members list.
The error message I get while trying to send message to this group is
SMTP Error: 4.5.0 error opening file/URL reference by alias.
The corresponding error in mail.log file is
30-Jan-2004 10:55:21.40 41c.7e4.1098 tcp_intranet J 0 <group-name>@domain rfc822; <group-name>@domain domain (localhost [127.0.0.1]) 452 4.5.0 error opening file/URL referenced by alias: <group-name>@domain
Now when I construct and Test the LDAP URL from Console, the error I get is:
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
I have increased the various limits but I still get the same error when I send mail to that group or do a LDAP Test:
The deafult and new limits are:
Sizelimit: Default 2000 New 10000
Timelimit Default 3600 New 3600
Lookthroughlimit Default 5000 New 6000
The corresponding error entry in access log of slapd is:
30/Jan/2004:12:19:26 +051800] conn=34 op=213 RESULT err=11 tag=101 nentries=0 etime=2 notes=U
My search for Administrative limit problem and error opening file/URL error in Sun forum and other groups did get some hits but that did not solve my problem.
I will appreciate any suggestion/comments.
Thanks and Regards,
Maneesh BishtThanks Jay.
My problem has been fixed.
Your suggestion was to increase the lookthrough limit. As you would have noticed in my posting that I had increased this limit to 6000 but that did not solve my problem. Today I increased this limit to 10000. And after that I did not get "administrative limit exceeded" error. Also I do not get "error opening file/URL reference by alias" error while sending E-mail to a particular group of 800+ ids.
Regards,
Maneesh Bisht -
Ldap_search: Administrative limit exceeded
Hi I am running a number of DSCC 11.1.1.3.0 LDAP instances
within those instances I have configured the 'size limit' to unlimited (and restarted the server)
when an authenticated user does an ldapsearch they get the full search returned but when an anonymous users does the same search
they hit the 'Administrative limit exceeded' error.
what am I missing that would allow an anonymous user to return the full search?
Thanks in Advance.I assume you are connecting direct to a Directory Server and not via a Directory Proxy instance.
Have you checked if your bound users have any of the the following operational attributes set on them?
nssizelimit
nsTimeLimit
nsLookThroughLimit
Also take a look at the error code in the logs, it may be that your search is failing due to time or indexes rather than size of result. -
[LDAP: error code 11 - Administrative Limit Exceeded]
Hi,
I am trying to search LDAP and retrieve a attribute (checksecurity) based on the uid (hardcoded the uid), below is the code :
<invoke name='getResourceObjects' class='com.waveset.ui.FormUtil'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
</invoke>
<s>person</s>
<s>Resource_LDAP</s>
<map>
<s>searchScope</s>
<s>ou=people,o=abc.com</s>
<s>searchAttrsToGet</s>
<List>
<String>checksecurity</String>
<String>uid</String>
</List>
<s>conditions</s>
<map>
<s>uid</s>
<s>AE8024T</s>
</map>
</map>
</invoke>
Below is the block trace :
<block name='Test' trace='true'>
<invoke name='getResourceObjects' class='com.waveset.ui.FormUtil'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref> --> com.waveset.workflow.WorkflowEngine@539f0d
</invoke> --> com.waveset.server.InternalSession@17210a5
<s>person</s> --> person
<s>Resource_LDAP</s> --> Resource_LDAP
<map>
<s>searchScope</s> --> searchScope
<s>ou=people,o=abc.com</s> --> ou=people,o=abc.com
<s>searchAttrsToGet</s> --> searchAttrsToGet
<o>[checksecurity, uid]</o> --> [checksecurity, uid]
<s>conditions</s> --> conditions
<map>
<s>uid</s> --> uid
<s>AE8024T</s> --> 210014992
</map> --> {uid=AE8024T}
</map> --> {searchAttrsToGet=[checksecurity, uid], searchScope=ou=people,o=abc.com, conditions={uid=AE8024T}}XPRESS <invoke> exception:com.waveset.util.WavesetException: Can't call method getResourceObjects on class com.waveset.ui.FormUtil
==> com.waveset.util.WavesetException: Error searching for objects
==> javax.naming.LimitExceededException: [LDAP: error code 11 - Administrative Limit Exceeded]
Please let me know if anyone has come across this error.
Thanks & Regards
ArunYour LDAP server has search limits for the user you're logging in as (or, more likely, it has default limits, and you haven't made exceptions for that user).
If you're using Sun Directory Server, you can remove these limits by setting 'nsLookThroughLimit' and 'nsSizeLimit' both to -1 for that user. -
ODSEE 11gR1------LDAP: error code 11 - Administrative Limit Exceeded
Hello,
We are facing some issues browsing the server content when using some accounts.
We've got the error code below:
Caused by: javax.naming.LimitExceededException: [LDAP: error code 11 - Administrative Limit Exceeded]; remaining name 'ou=Users,o=XXX"
We've already tried to solve it using the below posts:
http://docs.oracle.com/cd/E19693-01/819-0995/bcapq/index.html
http://docs.oracle.com/cd/E19424-01/820-4809/gbxdp/index.html
But the problem still occurs.
Do you have any idea how to solve it?
Thank you in advance for your help.Hello,
These are some logs while using the application and the LDAP server.
06 mai 2013 09:52:55,375 DEBUG rte_log: - LDAP search filter is '(&(objectClass=rteFOCustomers)(cn=*)(displayName=*)(iso6523=*))'
06 mai 2013 09:52:55,375 INFO rte_log: - Recherche de sociétés avec le filtre '(&(objectClass=rteFOCustomers)(cn=*)(displayName=*)(iso6523=*))'
06 mai 2013 09:52:55,491 INFO rte_log: - La recherche de sociétés avec le filtre '(&(objectClass=rteFOCustomers)(cn=*)(displayName=*)(iso6523=*))' a ramené : 925 elements
06 mai 2013 09:53:02,954 ERROR rte_log: etso - [LDAP: error code 11 - Administrative Limit Exceeded]
The account used to browse the server is the directory manager account.
Thank you for your help. -
Need Help with "ldap_search: Administrative limit exceeded" issue
Hi,
I recently created an index for an attribute called abcSmDisableFlag. When i perform an Ldapsearch using an application owners binddn, 10 entires are returned before i get the error: ldap_search: Administrative limit exceeded. When I use the Directory Manager I do not get this error while the same 10 entries are returned.
I have analyzed the error and access logs and i think the problem is with the index (notes=U). I performed a reindex on the attribute but it din't work.
Below are the details i gathered from
error log:
[20/Sep/2010:15:04:59 -0400] - WARNING<20805> - Backend Database - conn=1189378 op=1 msgId=2 - search is not indexed base='ou=customers,o=abc
enterprises,c=us,dc=abc,dc=net' filter='(&(objectClass=abcIdentity)(abcIdmDeleteDate<=2010-09-20)(!(abcSmDisabledFlag=1)))' scope='sub'
access log:
[20/Sep/2010:15:04:59 -0400] conn=1189378 op=-1 msgId=-1 - fd=536 slot=536 LDAP connection from UserIP to ServerIP
[20/Sep/2010:15:04:59 -0400] conn=1189378 op=0 msgId=1 - BIND dn="cn=xyzservices,ou=appid,dc=abc,dc=net" method=128 version=3
[20/Sep/2010:15:04:59 -0400] conn=1189378 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0.001190 dn="cn=xyzservices,ou=appid,dc=abc,dc=net"
[20/Sep/2010:15:04:59 -0400] conn=1189378 op=1 msgId=2 - SRCH base="ou=customers,o=abc enterprises,c=us,dc=abc,dc=net" scope=2 filter="(&
(objectClass=abcIdentity)(abcIdmDeleteDate<=2010-09-20)(!(abcSmDisabledFlag=1)))" attrs=ALL
[20/Sep/2010:15:05:03 -0400] conn=1189378 op=1 msgId=2 - RESULT err=11 tag=101 nentries=1 etime=4.604440 notes=U
I have indexed both abcIdmDeleteDate and abcSmDisabledFlag with a presence and equality index.
I am using Sun Directory Server 6.2. All the nsslapd limits are at Default value and I am not supposed to increase those values.
I will be very grateful if anyone can kindly share ideas/solutions on this issue and help me out.
Thanks!!I don't know if your issue has been resolved but two things i see here:
1 - you should not be on 6.2, move to 6.3 or 7.
2 - your filter is the answer, when you use a filter of "(&(objectclass=abcIdentity)(abcIdmDeleteDate<=2010-09-16)("\!"(abcSmDisabledFlag=1)))", DSEE takes the 1st part of your filter, in your case objectclass=abcIdentity, and does a search on it. Then after retrieving all entries it checks all that have an abcSmDisableFlag <=2010-09-16 and finally out of the remaining entries it will check which do not have an abcSmDisableFlag=1.
The search on objectClass is resulting in an unindexed search, apparently. What you need to do is alter the order of your attributes in your search filter and have objectClass at the end.
I hope this makes sense and helps. -
Administrative Limit Exceeded - DSCC Entry Management Tab
DS 6.3.1
When performing searches in the DSCC under the Entry Management tab I am getting an error that says Administrative Limit Exceeded. I know this is being caused by the global searchlimit and/or lookthroughlimt settings. I can set those to unlimited to resolve the issue but I don't want to open those values up to all users. I also know that I can set these same limits on a per entry basis by adding the nssizelimit and nslookthroughlimit attributes with -1 values to the particular user's entry.
In the DSCC however, the user that is binding to my DS instance and performing the searches is: cn=admin,cn=Administrators,cn=dscc
This user exists in the DSCC registry, not my DS instance. I assume it can BIND to my DS instance via the Pass Through Authentication plugin. I have tried setting both the nssizelimt and nslookthroughlimit attributes to -1 in that user's entry in the DSCC registry but it doesn't work like it does when I set those to an entry that exists in my DS instance. I'm guessing the Pass Through Authentication plugin doesn't look for those attributes and/or doesn't return them to my DS instance.
Is there a way to set the sizelimit and lookthrough limits for "cn=admin,cn=Administrators,cn=dscc" so I don't get the error in the DSCC and where I don't have to open up those limits globally? Is there a best practice for this other than telling me that the Entry Management tab is not the best place to be doing such tasks? I'm aware of that but this is actually for a customer who desires to use the Entry Management section to search for and periodically manage his entries.
Thanks in advance.The behaviour you're observing is documented in a bug. Unfortunately it's not implemented since the 5.2 days and not targeted for 7.0 either. You could create a local admin user and assign rights, or use a tool like "Apache Directory Studio" and log in as directory manager.
4534340 reslimit should provide interface for chaining and PTA plugin -
Hello All,
I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
Regards,
Arpita.
Moderator message: Welcome to SCN!
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 20, 2011 2:01 PMHi Ramya,
Your prog running in the back ground, so the time limit of the prog is exceded. Go to sm37 see the prog running time if exceded correct the time.
Regards
Srinu -
Time Limit exceeded error in R & R queue
Hi,
We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
Any pointers on this would be of great help.
Thanks in advance,
Regards,
Rasmi.Hi Rasmi
I suppose that the usual answer would be to increase the timeout for the R&R queue.
We have increased the timeout on ours to 60 mins and that takes care of just about everything.
The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time
If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
Regards
James -
Here are 2 queries that I ran...
ldapsearch -h <hostname1> -p 389 -D uid=<id>,ou=people,ou=intranet,dc=<company>,dc=com -w <password> -b "ou=people,ou=intranet,dc=<company>,dc=com (member=uid=<uid>,ou=people,ou=intranet,dc=<company>,dc=com) cn
ldapsearch -h <hostname2> -p 389 -D uid=<id>,ou=people,ou=intranet,dc=<company>,dc=com -w <password> -b "ou=people,ou=intranet,dc=<company>,dc=com (member=uid=<uid>,ou=people,ou=intranet,dc=<company>,dc=com) cn
ldap_search: Administrative limit exceeded
One query returned 0 results, the other "Administrative limit exceeded". Looking at the properties of both directory servers, the look-through-limit and search-size-limit are exactly the same. And both of these servers replicate with one another. If it helps hostname2 is a true master, hostname1 was a promoted supplier to master.
What could be the reason why one search returns 0 results and the other "administrative limit exceeded"?The first thing to do is compare the configured indexes on the two systems and make sure the second host is missing the needed equality index for member.
Assuming there is a missing index, you will need to configure the index as per the docs here -
http://docs.oracle.com/cd/E19656-01/821-1504/fwbrl/index.html
and then generate the index database as per here -
http://docs.oracle.com/cd/E19656-01/821-1504/gadse/index.html
Be careful only to generate the index you need. If you leave the index list empty, I think all of them get recreated. Reindexing puts the backend into readonly and can take a long time. -
License.Limit.Exceeded error with unlimited licence
I am getting Licence.Limit.Exceeded errors when FMS had
several hundred connections although I have unlimited connections
licence. Because of this error, FMS rejected all further
connections.
Here is log:
2009-01-30 20:50:41 11220 (i)2651182 (_defaultRoot_,
_defaultVHost_) : Max connections allowed exceeds license limit.
Rejecting connection to : chatapp/_definst_. -
2009-01-30 20:50:41 11220 (w)2641213 Connection rejected by
server. Reason : [ License.Limit.Exceeded ] : (_defaultRoot_,
_defaultVHost_) : Max connections allowed exceeds license limit.
Rejecting connection to : chatapp/_definst_. -Flash Media Interactive Server 3.0.1
Unlimited connections and bandwidth license.
And I only ran on this problem in some chat rooms
(applications), others work well. -
TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP
Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas -
Time Limit exceeded error in ALV report
I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.
You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
You may need to re-check your query...And also, review the alv catalog and any events you are using....
Greetings,
Blag. -
Time Limit exceeded Error while updating huge number of records in MARC
Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = gs_headdata
CLIENTDATA =
CLIENTDATAX =
plantdata = gs_plantdata
plantdatax = gs_plantdatax
IMPORTING
return = ls_return.
IF ls_return-type <> 'S'.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
CALL METHOD me->populate_error
EXPORTING
message = lv_message.
CONTINUE.
ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender
Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = gs_headdata
CLIENTDATA =
CLIENTDATAX =
plantdata = gs_plantdata
plantdatax = gs_plantdatax
IMPORTING
return = ls_return.
IF ls_return-type <> 'S'.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
CALL METHOD me->populate_error
EXPORTING
message = lv_message.
CONTINUE.
ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
JitenderHi Raju,
Use the following routine to get fiscal year/period using calday.
*Data definition:
DATA: l_Arg1 TYPE RSFISCPER ,
l_Arg2 TYPE RSFO_DATE ,
l_Arg3 TYPE T009B-PERIV .
*Calculation:
l_Arg2 = TRAN_STRUCTURE-POST_DATE. (<b> This is the date that u have to give</b>)
l_Arg3 = 'V3'.
CALL METHOD CL_RSAR_FUNCTION=>DATE_FISCPER(
EXPORTING I_DATE = l_Arg2
I_PER = l_Arg3
IMPORTING E_FISCPER = l_Arg1 ).
RESULT = l_Arg1 .
Hope it will sove ur problem....!
Please Assign points.......
Best Regards,
SG -
Message limit exceeded error thrown by Adobe and field becomes blank
Hi,
I'm facing a strange problem with Adobe Forms.
We've created custom MSS scenario to suit customer requirements. In that we are required to display drop down values.
All drop down values and form is displayed <b>correctly the first time</b> i.e. when MODE='CREATE' and EVENT=space. When we click on 'Review' button to review form, a server round trip with 'CHECK' event is correctly performed. However a strange error "Message limit exceeded. Remaining 8 errors not reported." is thrown by Adobe Reader. After clicking 'Ok' all fields on form are cleared.
This message is somehow related to drop downs as I've 8 drop downs on my form. (Checked by removing one drop down and then message came as 7 errors not reported.)
Is it possible that error is being caused by some values in 'ADDITIONAL_DATA' table? Reason is when I removed one set of values (drop down values for one field), form seems to work without error. But there is <b>nothing wrong in values</b> for those drop downs
We are on
NW2004s SP9
Adobe Livecycle Designer 7.1.3129
Adobe Reader 7.0.5
Regards,
AmitHi,
Finally got the solution. It was very simple as compared to the problem.
Firstly the problem, in one of the configuration tables description consisted of "" (ASCII 150) and not "-" (ASCII 45). On looking at it, it appeared exactly the same. I guess drop down values cannot consist characters from extended character set.
Solution was simple, just replaced ASCII 150 with ASCII 45 and rest all worked fine.
Regards,
Amit
Maybe you are looking for
-
Error while calling BI Publisher from Forms 10g using Webservice - Urgent !
Hi, I am calling a BI Publisher(10.1.3.4.1) webservice from the Forms 10g (10.1.2.0.2). I developed a jar file which works fine when I run from the Jdeveloper. I have successfully attached jar file to the Forms 10g but when I am calling from the when
-
What would the CODE be, in Flash, for making buttons transparent on MOUSEOVER?
I am building my site in Flash, and I have these thumbnails, that when moused over, a larger version pops up. Problem is, they are being obscured by the other thumbs. See for yourself: http://www.andreadams.com/Andre_Adams_products_games.htm (also at
-
hi guys, any BAPI/FM that can be used to upload PGI, i need to put in the storage location for every DO
-
I wolud like to make a Drag&Drop JTree
Hi everyone: I'm trying to implement a JTree with Drag&Drop support. I've been lookig for some code examples but It was imposible to find them. I didn't found either information about drag&drop. Thank you very much. Chefo
-
CS6 Photopshop, Illustrator and Indesign crash upon opening Window 8 64-bit.
Runnning Genuine CS6 Photopshop, Illustrator and Indesign crash upon opening without any error message... worked fine then stopped working. Running it on Window 8 64-bit. Have tried opening without 3d party plugins, resetting preferences, and unin