Administrative privileges problem while installing an app
Hi,
I'm using late 2012 iMac with OS X Mavericks. (Upgrade from all beta versions of Mavericks)
Sometimes (not allways) administrator privileges window not pops-up when installing an app. When I click install button, nothing happend.
After logoff or restart computer and then retry to installation, administrator privileges window pops-up and installation starts after writing user password.
verify and repair disk permission doesn't help.
Any advice?
Thanks
belek
Hi,
I haven't come across such an issue before but I would like to help. This could be probably because, the downloaded file may be corrupted due to come reasons. I would recomend you to give a try after downloading it once again. Please let me know your thoughts on the same.
Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support
Similar Messages
-
Problem while installing iPlanet App server 6.5
when trying to install iplanet app server 6.5 on solaris 2.8, downloaded from the net, the installation hangs when displaying the progress bar. We have iplanet web server 6.0 sp2 installed in the machine. We also installed all the solaris patches it required. we tried 3,4 times,it is not giving any error message,just the installation screen hangs....
Thanks in advance,
[email protected]Hi,
I haven't come across such an issue before but I would like to help. This could be probably because, the downloaded file may be corrupted due to come reasons. I would recomend you to give a try after downloading it once again. Please let me know your thoughts on the same.
Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support -
Why I'm always having a problem in installing any app? They keep telling me retry on all apps while installing ...
1. Settings>General>Date and Time>Set Automatically>On
2. Make sure Time Zone is correct
3. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo -
I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.. -
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
Problem while installing CS6, Please Help
Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.
Hi,
Please share your system configuration on which you are trying to install Ps CS6.
Regards,
Ashutosh
Ps Installer QE -
Error while installing Oracle Apps R12 , on windows server 2003 R2
Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul SrivastavaHi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava -
Problem while installing solaris 10 on HP proliant DL 380 G5.
Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected. -
Re: problem while installing WEB-enyterprise
Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
ThanksActually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks -
Have a problem while installing Asmlib packages
hi all
I have some problem while installing ASMlib packages.
my OS=Redhat linux 5.3
kenel version using this command uname -r=2.6.18-128.el5
I have downloaded packages and successfully installed following 4
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
but while installing following got error
rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
thanx in advanceI think you just need below rpms to configure asmlib:
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
Read this thread:
Error install ASMLib on RedHat linux -
Error while installing oracle apps 11.5.10
Hi all,
I have got errors while installing oracle apps 11.5.10. I have configured all the system parameters.
Unable ti complete instance configuration
RW-50010 error script has returned an error 1
RW-50004 error code received when running external process
Please let me know the solution
Thanks
ManikandanYou would get better answers if you asked in the correct forum.
LCM: 11i Install/Upgrade
Also, it would help if you looked at the logs to find the errors. -
While installing oracle apps 11.5.10 the post installion check JSP fails
Hi Guys,
While installing oracle apps 11.5.10 on oracle linux OEL4.7 i am facing one post installation check failure i.e JSP CHECK. even i tried aoljtest its getting fail.
I am output of error log file and access log files.
Environment:
Oracle apps version:11.5.10
Os :oracle linux 4.7
bit :32 bit
database : vision type
Error_log file contains
[Thu Aug 23 03:38:27 2012] [error] OPM:Can not find one alive process
[Thu Aug 23 03:38:27 2012] [error] [client 49.248.45.6] File does not exist: /oa_servlets/AppsLogin
[Thu Aug 23 03:38:37 2012] [error] OPM:Can not find one alive process
[Thu Aug 23 03:38:37 2012] [error] [client 49.248.45.6] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
Access_log file contains
173.49.29.80 - - [23/Aug/2012:01:08:08 -0400] "GET /OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/11i/applmgr/visappl/fnd/11.5.0/secure/VIS_ora11i/vis.dbc HTTP/1.1" 404 239
173.49.29.80 - - [23/Aug/2012:01:08:08 -0400] "GET /OA_HTML/US/ICXINDEX.htm HTTP/1.1" 200 3483
49.248.45.6 - - [23/Aug/2012:01:12:38 -0400] "GET /aplogon.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:01:12:40 -0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 404 227
49.248.45.6 - - [23/Aug/2012:01:12:49 -0400] "GET /servlets/weboam/oam/oamLogin HTTP/1.1" 404 234
49.248.45.6 - - [23/Aug/2012:01:16:36 -0400] "GET /FND_WEB.PING HTTP/1.1" 404 218
smtp.ttml.co.in - - [23/Aug/2012:01:19:06 -0400] "GET /servlets/IsItWorking HTTP/1.1" 403 230
smtp.ttml.co.in - - [23/Aug/2012:01:19:11 -0400] "GET /servlets/IsItWorking HTTP/1.1" 403 230
smtp.ttml.co.in - - [23/Aug/2012:01:20:43 -0400] "GET /servlets/IsItWorking HTTP/1.1" 403 230
49.248.45.6 - - [23/Aug/2012:03:38:23 -0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 404 227
49.248.45.6 - - [23/Aug/2012:03:38:27 -0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 404 227
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET / HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /apptitle.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /applist.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /aplogon.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:32 -0400] "GET /appsmed3.gif HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:37 -0400] "GET /servlets/weboam/oam/oamLogin HTTP/1.1" 404 234
49.248.45.6 - - [23/Aug/2012:03:38:44 -0400] "GET /appdet.html HTTP/1.1" 304 -
49.248.45.6 - - [23/Aug/2012:03:38:47 -0400] "GET /appdet.html HTTP/1.1" 304 -
Please provide some solution.Please see these docs.
Servlet and JSP Pages return a "Page Not Found" Error After Install of Applications [ID 372096.1]
"Unrecognized Option: -Client,Could Not Create The Java Virtual Machine." With Applications 11i [ID 358061.1]
Receiving ''Internal Server Error'' When Checking Out From Supplier Punchout After Upgrade to Java Development Kit (JDK) 6 [ID 781750.1]
Thanks,
Hussein -
A problem while installing webdynpro
Hi all:
there is a problem while installing webdynpro:
The SAP NetWeaver Developer Studio 7.0.17 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard. For detailed error descriptions, please open file://D:\nwds\NWDS\NWDS\J2EE-R~1\IDE\setup\saplogvw.exe .
The following program files could not be registered:
c:\windows\system32\librfc32.dll
The installed applications may not function correctly until all program files are successfully installed.
Could you please tell me how to solve it ?Hi
Please have a look on these similar thread
1.[Problem in installation SAP Netweaver 2004s |Problem in installation SAP Netweaver 2004s;
2.[Installation error during installing SAP NetWeaver developer studio|Installation error during installing SAP NetWeaver developer studio 7.0.11;
Best Regards
Satish Kumar -
Problem while Installing adobe pro X
we have purchased adobe CS6 full version at biotech park, lucknow. and facing some problem while installing adobe pro X component out of all the given component. kindly help me on this..
What system? What is the exact error? Provide more info and the install error summary.
Mylenium
Maybe you are looking for
-
Hello... I am creating a windows phone 8.1 phoegap app.It is using local databse called websql using this link.I created app and datas can be fetch from offline.It is working very well But the problem is i need to see the databse i created.Where to f
-
I had my iPhone 5c stolen this Tuesday afternoon while I was at the beach. Immediately after I noticed it missing I called the phone and it was off. I called the phone continuously later that night but it remained off. I did not use the Find my iPhon
-
Question about how ExifMeta handles multivalued tags
Hi, I have tested the ExifMeta (Great work, just what I needed!) to read face recognition data written by Picasa to RegionName, RegionType etc. fields in jpg metadata. Everything seems to work fine if there is only one name in the field but Picasa wr
-
Hello all. Printer type: HP Laserjet Pro CP-1525nw Printer Model: CE-875AOS: Mac OS 10.8.3Browser: Firefox v 20.0 When I print from Word or Excel, all is OK.However, when I print from Firefox, any website (example):http://www.gentrustwm.com/wp-conte
-
Decoding values in SqlServer_Inventory.Inventory.sqlservicetype
Hi I'm using the following script snippet to decode the values contained in the SqlServer_Inventory.Inventory.sqlservicetype column in the MAPS database: SELECT sqlservicetype, CASE sqli.sqlservicetype WHEN 1 THEN 'Database' WHEN 2 THEN 'other 2' WHE