Administrative Timesheet Classes and TS_LINE_CLASS_ORGANIZATION

Hi!
I'm bulk-creating lots of admin timesheet classes (yes, I know that there's no supported way of removing such classes after creating them, but still...)
When creating such a line class, there's a field TS_LINE_CLASS_ORGANIZATION that's used in sorting the dataset returned to PWA - e.g.: the selection field when inserting new non-Project lines into your timesheet gets data from a storedproc that
sorts by this field first and Name after that.
My question is: do any of you know if that field is used for any other purpose other than sorting?
Checking the database shows all pre-configured and manually added entries having the same value ('Default') in this field.
Could it be that 'ORGANIZATION' in this context implies 'means of organizing your entries' ?!?
It's got nothing to do with Departments.
The reason for asking is that I want my bulk-inserted classes to have a specific grouping and sort order and using this field would be perfect if it doesn't ruin something else.
On a related note - there's a field TS_LINE_CLASS_DESC that apparently is meant to hold a description text and which could possibly be used in reporting - it would have been nice if that field text had been used for tooltip text instead of having the TS_LINE_CLASS_NAME
re-appear as a tooltip when holdning the mouse above the name field... sort of redundant if you ask me :-)
/Lars Hammarberg
//Lars Hammarberg www.connecta.se

Hi bellyripper,
That worked perfectly. Thank you. Tell me, if you don't mind, why I was able to compile the entire package fine, but when I attempted to compile the package's individual files, I ran into the compiler erros?
Thanks again.

Similar Messages

  • Transport classes and programs to another server

    Except for transport routing and charm copy function, do we have other ways to do so?
    for example copy or so forth.
    best regards,
    Blake Le

    Hi Blake
    SAP R/3 Correction and Transport System
    Operating system level files in the transport process:
    The SAP C program TP, requires a special file structure for the transport process. The file system is operating system dependent. TP uses a transport directory or file system, which is called /usr/sap/trans.
    The /usr/sap/trans file system is generally NFS mounted form the development system to other systems unless a system is defined as a single system in the CTS pipeline. All the sub directories should have <SID>adm as the owner and sapsys as the group; and proper read, write and execute access should be given to owner and the group. The TP imports are always performed by <SID>adm.
    The following are the subdirectories in /usr/sap/trans:
    /data
    /cofiles
    /bin
    /log
    /actlog
    /buffer
    /sapnames
    /tmp
    /usr/sap/trans/data: holds the data of transport objects after they are released . The example of a data file is R904073.DEV. The extension DEV means the data file was released from the DEV or development system.
    /usr/sap/trans/cofiles: The cofiles directory holds the command files for all change requests. These files are like a command or control files used to import the data files. The common directory for CTS system is /usr/sap/trans. After a change request is released from the source system , the data is exported immediately to the file system of the operating system. The SAP transport utility TP uses the cofile to transport a data file. The example of a file in cofiles directory is K904073.DEV.
    /usr/sap/trans/bin: holds the most important file TPPARAM in the CTS system. TPPARAM file has all the information about the CTS systems in the CTS pipeline. TPPARAM file is the parameter file for the transport program TP and it is the common file for all the systems in the CTS pipeline. As you know already that /usr/sap/trans should be NFS mounted to all the systems in a CTS pipeline, TP program has access to the TPPARAM file from all the systems. The following is an example of typical TPPARAM file for five SAP systems in the CTS pipeline:
    #@(#) TPPARAM.sap 20.6 SAP 95/03/28
    Template of TPPARAM for UNIX #
    First we specify global values for some parameters, #
    later the system specific incarnation of special parameters #
    global Parameters #
    transdir = /usr/sap/trans/
    dbname = $(system)
    alllog = ALOG$(syear)$(yweek)
    syslog = SLOG$(syear)$(yweek).$(system)
    System spezific Parameters #
    Beispiel T11 #
    DEV/dbname = DEV
    DEV/dbhost = sap9f
    DEV/r3transpath = /usr/sap/DEV/SYS/exe/run/R3trans
    QAS/dbname = QAS
    QAS/dbhost = sap8f
    QAS/r3transpath = /usr/sap/QAS/SYS/exe/run/R3trans
    TRN/dbname = TRN
    TRN/dbhost = sap17
    TRN/r3transpath = /usr/sap/TRN/SYS/exe/run/R3trans
    PRE/dbname = PRE
    PRE/dbhost = sap19f
    PRE/r3transpath = /usr/sap/PRE/SYS/exe/run/R3trans
    PRD/dbname = PRD
    PRD/dbhost = sap18f
    PRD/r3transpath = /usr/sap/PRD/SYS/exe/run/R3trans
    /usr/sap/trans/log: holds the entire log files, trace files and statistics for the CTS system. When the user goes to SE09 (workbench organizer) or SE10 (customizing organizer) transaction and opens the log for a transport, the log file for that transport will be read from /usr/sap/trans/log directory. Each change request should have a log file. Examples of log files are DEVG904073.QAS, DEVI904073.QAS and DEVV904073.QAS. The name of a log file consists of the names of the change request, the executed step, and the system in which the step was executed:
    <source system><action><6 digits>.<target system>
    Now we can analyze the above example DEVG904073. QAS. The <source system> = DEV, <action> = G or report and screen generation, <6 digits> = 904073 (these six digits numbers are exactly the same number as the six digits of the transport) and the <target system> = QAS
    Possible values for <action> are:
    A: Dictionary activation
    D: Import of application-defined objects
    E: R3trans export
    G: Report and screen generation
    H: R3trans dictionary import
    I: R3trans main import
    L: R3trans import of the command files
    M: Activation of the enqueue modules
    P: Test import
    R: Execution of reports after put (XPRA)
    T: R3trans import of table entries
    V: Set version flag
    X: Export of application-defined objects.
    /usr/sap/trans/actlog: holds action log files. The example of an action file is DEVZ902690.DEV. The following are the contents of the file:
    1 ETK220 u201C==================================================u201D u201C=================
    =============================
    1 ETK191 u201C04/30/1998u2033 Action log for request/task: u201CDEVK902690u2033
    1 ETK220 u201C==================================================u201D u201C=================
    =============================
    1 ETK185 u201C04/30/1998 18:02:32u2033 u201CMOHASX01u2033 has reincluded the request/task
    4 EPU120 Timeu2026 u201C18:02:32u2033 Run timeu2026 u201C00:00:00u2033
    1 ETK193 u201C04/30/1998 18:02:33u2033 u201CMOHASX01u2033 owner, linked by u201CMOHASX01u2033 to u201CDEVK902691u2033
    4 EPU120 Timeu2026 u201C18:02:33u2033 Run timeu2026 u201C00:00:00u2033
    1 ETK190 u201C05/04/1998 11:02:40u2033 u201CMOHASX01u2033 has locked and released the request/task
    1 ETK194 u201C05/04/1998 11:02:40u2033 **************** End of log *******************
    4 EPU120 Timeu2026 u201C11:02:40u2033 Run timeu2026 u201C00:00:09u2033
    ~
    ~u201DDEVZ902690.DEVu201D 10 lines, 783 characters
    /usr/sap/trans/buffer: transport buffer of the target systems; contains control information on which requests are to be imported into which systems and in what order the imports must occur. The /usr/sap/trans/buffer will have a directory for each system in the CTS pipeline. For example the buffer file for DEV system is /usr/sap/trans/buffer/DEV.
    /usr/sap/trans/sapnames: holds information pertaining to transport requests for each system user. There are files for each user who released change requests from the system.
    /usr/sap/trans/tmp: holds information about temporary data and log files. While the transport is occurring the Basis administrator can find a file that is related to the transport in the tmp directory; that file shows the exact status if the transport (What objects are being imported at that time).
    Important SAP delivery class and table types and tables in the CTS process:
    Delivery class
    The delivery class defines who (i.e. the SAP system itself or the customer) is responsible for maintaining the table contents. In addition the delivery class controls how the table behaves in a client copy and an upgrade. For example when you select a SAP defined profiles to perform a client copy, certain tables are selected according to their delivery class. DD02L table can show what delevery class a table belongs to.
    The following delivery classes exist:
    A: Application table.
    C: Customizing table, maintenance by customer only.
    L: Table for storing temporary data.
    G: Customizing table, entries protected against overwriting.
    E: Control table.
    S: System table, maintenance only by SAP.
    W: System table, contents can be transported via own TR objects.
    Table type
    The table type defines whether a physical table exists for the logical table description defined in the ABAP/4 Dictionary and how the table is stored on the database.
    The following are different table types in SAP:
    Transparent Tables
    There is a physical table on the database for each transparent table. The names of the physical table and the logical table definition in the ABAP/4 Dictionary are same. For every transparent table in SAP, there is a table in database. The business and application data are stored in transparent tables.
    Structure
    No data records exist on the database for a structure. Structures are used for the interface definition between programs or between screens and programs.
    Append Structure
    An Append structure defines a subset of fields which belong to another table or structure but which are treated as a separate object in the correction management. Append structures are used to support modifications.
    The following table types are used for internal purposes, for example to store control data or for continuous texts:
    Pooled table
    Pooled tables can be used to store control data (e.g. screen sequences, program parameters or temporary data). Several pooled tables can be combined to form a table pool. The table pool corresponds to a physical table on the database in which all the records of the allocated-pooled tables are stored.
    Cluster table
    Cluster tables contain continuous text, for example documentation. Several cluster tables can be combined to form a table cluster. Several logical lines of different tables are combined to form a physical record in this table type. This permits object-by-object storage or object-by-object access. In order to combine tables in clusters, at least part of the keys must agree. Several cluster tables are stored in one corresponding table on the database.
    Tables in CTS process:
    TRBAT and TRJOB:
    TRJOB and TRBAT are the major tables in the CTS process. After TP program has sent the event to the r3 system, RDDIMPDP checks table TRBAT in the target system to find out if there is an action to be performed. Mass activation, distribution, or table conversions are the examples of actions. If there is action to be performed, RDDIMPDP starts the appropriate program in the background task. RDDIMPDP then reschedules itself.
    By checking table TRJOB, RDDIMPDP automatically recognizes if a previous step was aborted, and restarts this step. For each transport request , TP program inserts an entry into table TRBAT. If the return code 9999 in this table then the step is waiting to be performed. Return code 8888 indicates that the step is active and currently being processed. A return code of 12 or less indicates that the step is finished. In addition, TP inserts a header entry to let the RDDIMPDP program know to start processing. The column return code will therefore contain a B for begin. When RDDIMPDP is started, it sets the header entry to R(un), and starts the required program. When all the necessary actions are performed for all the transport requests, the column return code contains all the return codes received, and the column TIMESTAMP contains the finishing time. The header entry is set to F(inished). TP monitors the entries in TRBAT and TRJOB tables. When the header entry in TRBAT is set to finished. The entry in TRJOB is deleted.
    Transport Tables SE06
    TDEVC - Development classes
    TASYS - Details of the delivery. Systems in the group that should automatically receive requests, have to be specified in table TASYS.
    TSYST - The transport layers will be assigned to the integration systems. ( Define all systems)
    TWSYS - Consolidation routes ( define consolidation path)
    DEVL - Transport layers are defined here
    In u201CConfiguring the CTS systemu201D section, We will learn more about the transport tables in SE06 transaction
    Programs in the CTS process:
    In the CTS table section we learned about the RDDIMPDP program. RDDIMPDP program needs to be scheduled in all the clients in an instance. It is recommended to schedule the RDDIMPDP as event driven.
    RDDPUTPP and RDDNEWPP programs can be used to schedule RDDIMPDP program in the background.
    The ABAP/4 programs that RDDIMPDP starts are determined by the transport step to be executed that is entered in the function field of table TRBAT.
    Function Job Name Description of transport Steps
    J RDDMASGL Activation of ABAP/4 dictionary objects
    M RDDMASGL Activation of match codes and lock objects
    S RDDDISOL Analysis of database objects to be converted
    N RDDGENOL Conversion of database objects
    Y RDDGENOL Conversion of matchcode tables
    X RDDDICOL Export of AD0 objects
    D RDDDIC1L Import of AD0 objects
    E RDDVERSE Version management update during export
    V RDDVERSL Version management update during import
    R RDDEXECL Execution of programs for post - import processing
    G RDDDIC3L Generation of ABAP/4 programs and screens
    Version Management:
    One of the important features of Workbench Organizer is Version Management. This feature works for all the development objects. Using the version management feature the users can compare and retrieve previous versions of objects.
    Version management provides for comparisons, restore of previous versions, documentation of changes and assistance in the adjustment of data after upgrading to a new release. With the release of a change request, version maintenance is automatically recorded for each object. If an object in the system has been changed N times, it will have N delta versions and one active version. To display version management, for ABAPs use transaction SE38 and for tables, domains and data elements use SE11. The path to follow is Utilities -> Display version. Using version management the users can view existing version for previously created ABAP code, make changes to the code, compare code versions and restore original version of the code. Now the users will be restore previous versions without cut and paste steps of the past.
    TP and R3trans program:
    The basis administrator uses TP program to transport SAP objects from one system to another. TP is a C program delivered by SAP that runs independently of the R/3 system. TP program uses the appropriate files located in a common transport directory /usr/sap/trans. TP starts C programs, ABAP/4 programs and special operating system commands to its job. R3trans is one of the most important utility program called by TP. Before using the TP program, the basis administrator needs to make sure that the CTS system is setup properly and the right version of TP is running in the system. The TP program is located in the run time directory /usr/sap/<SID>/SYS/exe/run directory. It is automatically copied in the install process. A global parameter file TPPARAM that contains the databases of the different target systems and other information for the transport process controls TP. The global parameter file determines which R3trans is used for each system. If the parameter r3transpath is not defined properly then no export and import can be done. The basis administrator should make sure that the default value u201Cr3transpathu201D is properly defined. Later in this chapter we will learn more about TP and R3trans; also we are going to see how they are used.
    Configuring the TPPARAM file:
    Each time TP is started, it must know the location of the global parameter file. As we have seen before TPPARAM file should be in directory /usr/sap/trans/bin. The parameters in TPPARAM can either global (valid for each and every system in the cts pipeline) or local to one system. Th parameters are either operating system dependant (these parameters preceded by a keyword corresponding to the specific operating system) or database dependant (contain a keyword corresponding to a specific database system).
    The global parameter file provides variables that can be used for defining parameters. The variables can be defined in format: $(xyz). The brackets can be substituted with the u201C\u201D-character if required.
    The following pre-defined variables are available for the global parameter file:
    $(cpu1): The CPU name can be sun or as4 for example. In heterogeneous networks this variable is very important.
    $(cpu2): Acronym for the name of the operating system. The example for this variable can be
    hp-ux, or sunos . This is an operating system specific variable.
    $(dname): Used for the day of the week (SUN,MON,u2026.).
    $(mday): Used for the day of the current month (01-31).
    $(mname): Used for the name of the month (JANu2026DEC).
    $(mon): Used for the Month (01-12).
    $(system): R/3 System name.
    $(wday): Day of the week (00-06, Sunday=00, Monday=01, Tuesday=02 and so on).
    $(yday): Day of the current year (001-366). Using the number any day of the year can be chosen.
    $(year): Year (Example:1998 or 1999).
    $(syear): Short form of the year (two positions).
    $(yweek): Calendar week (00-53). The first week begins with the first Sunday of the year.
    For the database connection:
    The transport environment also needs parameters to connect to the R/3 System database. As we know already the every instance in the R/3 CTS pipeline has its own database, therefore specific parameters should be defined for each database system. From dbtype parameter of RSPARAM file, TP program identifies the database system.
    The two parameters u201Cdbnameu201D and u201Cdbhostu201D are required for ORACLE databases.
    DBHOST: is the name of the computer on which the database processes execute. TCP/IP name of the host if NT is being used.
    DBNAME: is the name of the database instance.
    As of Release 3.0E, two new parameters have been introduced.
    DBLOGICALNAME: The default value is $(system). The logical name that was used to install the database.
    DBCONFPATH: The default value is $(transdir).
    The parameters u201Cdbnameu201D and u201Cdbhostu201D are also used for INFORMIX databases in an installation:
    DBHOST: Same as Oracle.
    DBNAME: Name of the database instance, uppercase and lowercase are distinguished here.
    INFORMIXDIR : u201C/informix/<SAPSID>u201D is the default value. Defines the directory namewhere the database software can be found.
    INFORMIXSQLHOSTS: u201C$(informixdir)/etc/sqlhosts[.tli|.soc]u201Cis default value under Unix. The name of the SQLhosts file with its complete path is defined with this parameter.
    INFORMIX_SERVER: u201C$(dbhost)$(dbname)shmu201D is the default value. The name of the database server may be specified for a local connect.
    INFORMIX_SERVERALIAS: u201C$(dbhost)$(dbname)tcpu201Dis the default vlue. The name of the database server can be specified for a remote connect.
    For Microsoft SQL Server database the two parameters u201Cdbnameu201D and u201Cdbhostu201D are also required. DBHOST: The TCP/IP name of the host on which the database is running.
    DBNAME: The database instance name.
    For DB2 in AS/400 only u201Cdbhostu201D is required.
    DBHOST: System name of the host on which the database is running.
    If theu201DOptiConnectu201D is used, the following line should be specified:
    OPTICONNECT 1
    For DB2/ AIX
    The two parameters u201Cdbnameu201D and u201Cdbhostu201D are required
    DBHOST: The host on which the database processes are running. It is the TCP/IP name of the host for Windows NT (As we have seen in the earlier examples).
    DBNAME: Database instance name.
    The DB2 for AIX Client Application Enabler Software must also be installed on the host on which tp is running.
    ALLLOG: u201CALOGu201D $(syear) $(yweek)u201Dis the default value. This variable can be used in TPPARAM file to specify the name of a file in which tp stores information about every transport step carried out for a change request anywhere in the transport process. The file always resides in the log directory.
    SYSLOG: u201CSLOG $(syear) $(yweek).$(system)u201D is the default value. This variable can be used to name a file in which tp stores information about the progress of import actions in a certain R/3 System. The file does not store information for any particular change request. The file always resides in the log directory.
    tp_VERSION: Zero is the default value. If this parameter is set to not equal to zero, a lower version of tp may not work with this TPPARAM file. If the default value (zero) is set, the parameter has no affect.
    STOPONERROR: (Numeric value) The default value is 9. When STOPONERROR is set to zero, tp is never stopped in the middle of an u201Cimportu201D or u201Cputu201D call. When STOPONERROR is set to a value greater than zero, tp stops as soon as a change request generates a return code that is equal to or greater than this value (The numeric value of the STOPONERROR parameter is stored in the variable BADRC). Change requests, which still have to be processed for the current step, are first completed. A u201CSYNCMARKu201D in the buffer of the R/3 System involved, sets a limit here. tp divides the value of this parameter between two internal variables. STOPONERROR itself is treated as a boolean variable that determines whether tp should be stopped, if the return code is too high.
    REPEATONERROR (Numeric value too): The default value is 9. The REPEATONERROR parameter is similar to STOPONERROR. The difference is, REPEATONERROR specifies the return code up to which a change request is considered to be successfully processed. Return codes less than REPEATONERROR are accepted as u201Cin Orderu201D. Change requests that were not processed successfully stay in the buffer.
    NEW_SAPNAMES: Default value is u201CFALSEu201D. A file is created for each user of the R/3 System group in the u201Csapnamesu201D subdirectory of the transport directory. Except some of the operating system,the name of the user is the name of the file. It is very important to remember hat the special characters or length of the file name could cause problems. If all the R/3 Systems in the transport group have at least Release level 3.0.; TP program is efficient to handle this problem. The user names are modified to create file names that are valid in all operating systems and the real user names are stored in a corresponding file.
    Though we have seen so many parameters, for the minimum configuration the following two parameters are very important.
    TRANSDIR: specifies the name of the common transport directory. The following is a typical example from TPPARAM of Unix as we have seen before.
    transdir = /usr/sap/trans/
    DBHOST: contains the name of the database host. In Windows NT environment, this is the TCP/IP host name. The following is an example in Unix:
    DEV/dbname = DEV
    DEV/dbhost = sap9f
    DEV/r3transpath = /usr/sap/DEV/SYS/exe/run/R3trans
    For TP, to control u2018Start and Stopu2019 command files and database in R/3 the following important parameters are specified in TPPARAM:
    Parameters for the tp Function u201CPUTu201D: LOCK_EU (boolean) default value is u201CTRUEu201D. Though from version 3.1 onward the tp put command is used seldom in cts process still it is important to know how this parameter works. When u201Ctp putu201D is used, it changes the system change option . If the parameter is set to u201CFALSEu201D nothing gets changed. If the parameter is set to u201CTRUEu201D, the system change option is set to u201CObjects cannot be changedu201D at the beginning of the call, and gets changed back to its previous value at the end of the call. The u201Ctp putu201D command will give the exact status of the locking mechanism.
    LOCKUSER (used as boolean value): Default value is u201CTRUEu201D. This parameter is about the user login while tp put call is executed. If this parameter is set to u201CFALSEu201D, no locking mechanism for the users takes affect. If this parameter is defined as u201CTRUEu201D then a character is set in the database level; so only DDIC and SAP* can log on to the system. Users that have already logged on are not affected (this is a reason for activating the parameters STARTSAP and STOPSAP). The charactertor is removed at the end of the call, and all the users can log on to the SAP R/3 System again.
    STARTSAP: Default value is u201D u201C.or u201CPROMPTu201D for Windows NT . This parameter is used by TP to start an R/3 System. It is not necessary for the clients to make tp start and stop R/3 system..
    STOPSAP: Default value is u201D u201Cor u201CPROMPTu201D for Windows NT. TP uses this parameter to stop an R/3 System.
    STARTDB: Default value is u201D u201C. TP uses the value of this parameter to start the database of an R/3 System.
    The parameter is not active under Windows NT.
    STOPDB: Default value is u201D u201C. TP uses the value of this parameter to stop the database of an R/3 System.
    This parameter is not active under Windows NT.
    The above parameters in UNIX can be used as following:
    STARTSAP = startsap R3
    STOPSAP = stopsap R3
    STARTDB = startsap db
    STOPDB = stopsap db
    In Windows NT:
    STARTSAP =
    $(SAPGLOBALHOST)\sapmnt\$(system)\sys\exe\run\startsap.exe
    R3 <SID> <HOST NAME> <START PROFILE>
    STOPSAP =
    $(SAPGLOBALHOST)\sapmnt\$(system)\sys\exe\run\stopsap.exe
    R3 <SID> <HOST NAME> <INSTANCE> <PROFILE PATH + Instance profile>
    The parameters STARTDB and STOPDB are not active under Windows NT.
    Parameters for the tp function u201CCLEAROLDu201D
    DATALIFETIME (Numeric): Default value is u201C200u2033. When the data file has reached a minimum age, it is moved to the subdirectory old data with tp check. tp clearold all. The life span of the data files in the data sub directory can be set in days with this all, parameter.
    OLDDATALIFETIME (Numeric): Default value is u201C365u2033. When a file located in the olddata subdirectory is no longer needed for further actions of the transport system and has reached a minimum age, it is removed with tp check.all, tp clearold all. The minimum age in days can be set with this parameter.
    COFILELIFETIME (Numeric): Default value is u201C365u2033. This parameter is used just like DATALIFETIME parameter.
    LOGLIFETIME (Numeric): Default value is u201C200u2033. This parameter applies to the life span of the log files. When the log files in log subdirectory is no longer needed for the transport system and has reached a minimum age, it is deleted with the calls tp check.all, tp clearold all. The minimum age in days can be defined with this parameter.
    The Three Key Utilities of the CTS system (TP, R3trans and R3chop):
    TP: Earlier in this chapter we have seen the objectives of TP. The TP transport control program is a utility program that helps the user to transport objects from one system to another. TP program is the front-end for the utility R3trans. TP stands for u201CTransports and Putsu201D. To make the TP work successfully the CTS system needs to be correctly configured. The following steps are very important for TP to run properly.
    The transport directory /usr/sap/trans must be installed and NFS mounted to all the systems in the CTS pipe line.
    RDDIMPDP program must be running (event driven is recommended) in each client. RDDIMPDP can be scheduled in the background by executing RDDNEWPP or RDDPUTPP. Use the tp checkimpdp <sap sid> command in /usr/sap/trans/bin directory as <sid>adm user to check RDDIMPDP program.
    Use the tp connect <sap sid> command in /usr/sap/trans/bin directory to see whether the tp program is connecting to the database successfully or not. To run TP command the user has to logon as <sid>adm in source or target system.
    The R/3 Systems in the CTS pipeline must have different names.
    The Global CTS Parameter File TPPARAM must be correctly configured.
    The source system (for the export) and target system ( for the import) must have at least two background work processes. TP always schedules the C class job, so if all the background jobs are defined as A class job then there will be problems in transport steps.
    Important Tips :.It is always better to have the up to date TP version installed in your system. A user can ftp a current version of TP from SAPSERV4 of SAP. Though R3trans and other utility programs can be used to do the transport, it is recommended to use TP whenever possible for the following reasons..
    The exports and imports are done separately using TP program. For example: when a transport is released from the system, the objects are exported from the source database to the operating system and then the import phase starts to transport those objects to the target system.
    TP takes care of the order of the objects. The order, that was followed to export the objects; the same order will be followed to import them to the target database.
    The TP command processes all change requests or transports in the SAP system buffer that have not yet been imported successfully. All the import steps are executed automatically after TP calls R3trans program to execute the following necessary steps:
    Dictionary Import: ABAP/4 dictionary objects will be imported in this step.
    Dictionary Activation: Name tabs or runtime descriptions will be written inactively. The R/3 system keeps running until the activation phase is complete. The enqueue modules are the exceptions in the running phase. After the activation of new dictionary structure the new actions are decided to get the runtime objects to the target system.
    Structure conversion: If necessary the table structure is changed in this phase.
    Move Nametabs: The new ABAP/4 Dictionary runtime objects which were inactive up to now are moved into the active runtime environment in this process. The database structures are adjusted accordingly. From the first step to the Main import step inconsistencies can occur to the R/3 system. After the main import phase all the inconsistency ca be solved.
    Main import with R3trans: All the data are imported completely and the system comes to a consistent state.
    Activation of enqueue-objects: The enqueue-objects cannot be activated in the same way as the objects of the ABAP/4 Dictionary, so they have to be activated after the main import in this step. They are then used directly in the running system.
    Structure Conversion of match codes, Import application defined objects, versioning and execution of user defined activities are some of the steps after activation of enqueue-objects. The next step is generation of ABAP/4 programs and screens, where all the programs and screens associated with the change request are generated. When all the import steps are completed successfully, the transport request is removed from the import buffer.
    It is recommended by SAP to schedule regular periods for imports into the target system (e.g. daily, weekly or monthly). Shorter periods between imports are not advisable. The transport to production should not be done in the off hours when the users are not working
    TP can be started with different parameters. The u201Ctp helpu201D command can help user to generate a short description about the use of the command.
    The following are the some important commands of TP:
    For export:
    tp export <change request>: The complete objects in the request from the source system will be transported. This command also used by SAP System when it releases a request.
    tp r3e <change request>: R3trans export of one transport request.
    tp sde <change request>: Application defined objects in one transport request can be exported.
    tp tst <change request> <SAP system >: The test import for transport request can be done using this command.
    tp createinfo <change request>: This command creates a information file that is automatically done during the export.
    tp verse <request>: This command creates version creates versions of the objects in the specified request.
    To Check the transport buffer, global parameter file and change requests:
    tp showbuffer <sid>: Shows all the change requests ready to be imported to the target system.
    tp count <sid>: Using this command users can find out the number of requests in the buffer waiting for import.
    tp go <sid>: This command shows the environment variables needed for the connection to the database of the <sid> or target system.
    tp showparams <sid>: All the values of modifiable tp parameters in the global parameter file. The default value is shown for parameters that have not been set explicitly.
    To import the change requests or transports:
    tp addtobuffer <request>.<sid>: If a change request is not in the buffer then this command is used to add it to the buffer, before the import step starts.
    tp import all <sid>: This command imports all the change requests from the buffer to the target system.
    tp put <sid>: The objective of this command is same as u201Ctp import all <sid>u201D, but this command locks the system. This command also starts and stops the SAP system, if the parameters startsap and stopsap parameters are not set to u201D u201C.
    tp import <change request> <sid>: To import a single request from the source system to target system.
    tp r3h <change request>| all <sid>: Using this command user can import the dictionary structures of one transport or all the transport from the buffer.
    tp act <change request>|all <sid>: This command activates all the dictionary objects in the change request.
    tp r3i <change request> | all <sid>: This command imports everything but dictionary structures of one.
    tp sdi <change request>|all <sid>: Import application-defined objects.
    tp gen <change request>|all <sid>: Screen and reports are generated using this command.
    tp mvntabs <sid>: All inactive nametabs will be activated with this command.
    tp mea <change request>|all <sid>: This command will activate the enqueue modules in the change request.
    When you call this command, note the resulting changes to the import sequence.
    Additional tp utility options:
    tp check <sid>|all (data|cofiles|log|sapnames|verbose): User uses this command to find all the files in the transport directory that are not waiting for imports and they have exceeded the minimum time specified using the COFILELIFETIME, LOGFILELIFETIME, OLDDATALIFETIME and DATALIFETIME parameters of TPPARAM file.
    tp delfrombuffer <request>.<sid>: This command removes a single change request from the buffer. In case of TMS, the request will be deleted from the import queue.
    tp setstopmark <sid>: A flag is set to the list of requests ready for import into the target system. When the user uses the command tp import all <sapsid> and tp put <sapsid>, the requests in front of this mark are only processed. After all the requests in front of the mark have been imported successfully, the mark is deleted.
    tp delstopmark <sid>: This command deletes the stop mark from the buffer if it exists.
    tp cleanbuffer <sapsid>: Removes all the change requests from the buffer that are ready for the import into the target system.
    tp locksys <sid>: This command locks the system for all the users except SAP* and DDIC. The users that have already logged on are not affected by the call.
    tp unlocksys <sid>: This command unlocks the system for all the users.
    tp lock_eu <sid>: This command sets the system change option to u201Csystem can not be changedu201D tmporarily.
    tp unlock_eu <sid>: This command unlocks the system for all the changes.
    tp backupall <sid>: This command starts a complete backup using R3trans command. It uses /usr/sap/trans/backup directory for the backup.
    tp backup delta <sid>: Uses R3trans for a delta backup into /usr/sap/trans/backup directory.
    tp sapstart <sid>: To start the R/3 system.
    tp stopsap <sid>: To stop the R/3 system.
    tp dbstart <sid>: To start the database.
    tp dbstop <sid>: To stop the database.
    Unconditional modes for TP: Unconditional modes are used with the TP program and these modes are intended for the special actions needed in the transport steps. Using unconditional mode user can manipulate the rules defined by the workbench organizer. The unconditional mode should be used when needed, otherwise it might create problems for the R/3 system database. Unconditional mode is used after the letter u201CUu201D in the TP command. Unconditional mode can be a digit between 0 to 9 and each has a meaning to it. The following is a example of a import having unconditional mode.
    tp import devk903456 qas client100 U12468
    0: Called a overtaker; change request can be imported from buffer without deleting it and then uncoditional mode 1 is used to allow another import in the correct location.
    1: If U1 is used with the export then it ignores the correct status of the command file; and if it is used with import then it lets the user import the same change request again.
    2: When used with tp export, it dictates the program to not to expand the selection with TRDIR brackets. If used in tp import phase, it overwrites the originals.
    3: When used with tp import, it overwrites the system-dependant objects.
    5: During the import to the consolidation system it permits the source systems other than the integration system.
    6: When used in import phase, it helps to overwrite objects in unconfirmed repairs.
    8: During import phase it ignores the limitations caused by the table classification.
    9: During import it ignores that the system is locked for this kind of transport.
    R3trans: TP uses R3trans program to transport data from one system to another in the CTS pipeline. efficient basis administrator can use R3trans directly to export and import data from and into any SAP systems. Using this utility transport between different database and operating system can e done without any problems. Different versions of R3trans are fully compatible with each other and can be used for export and import. The basis administrator has to be careful using R3trans for different release levels of R/3 software; logical inconsistency might occur if the up to date R3trans is not used for the current version of R/3 system.
    The syntax for using the control file is following:
    R3trans [<options>] <control file> (several options used at the same time; at least one option must be there)
    For example: R3trans u2013u 1 u2013w test.log test
    In the above example a unconditional mode is used, a log file u201Ctest.logu201D file is used to get the log result and a control file u201Ctestu201D, where the instructions are given for the R3trans to follow. The user needs to logon as <sid>adm to execute R3trans.
    The following options are available for the R3trans program:
    R3trans -d : This command is used to check the database connection .
    R3trans -u <int>: Unconditional mode can be used as we have seen in the above example.
    R3trans -v : This is used for verbose mode. It writes additional details to the log file
    R3trans -i <file>: This command directly imports data from data file without a control file.
    R3trans -l <file>: This provides output of a table of contents to the log file.
    R3trans -n : This option provides a brief information about new features of R3trans.
    R3trans u2013t: This option is used for the test mode. All modifications in the database are rolled back.
    R3trans -c <f1> [<f2>]: This command is used for conversion. The <f1> file will be copied to <f2> file after executing a character set conversion to the local character set.
    Important tips: Do not confuse the backup taken using R3trans with database backup. The backups taken using R3trans are logical backups of objects. In case something happens to the SAP system these backups can not be used for recovery. R3trans backups can be only used to restore a copy of a particular object that has been damaged or lost by the user.
    R3trans -w <file>: As we have seen in the above example this option can be used to write to a log file. If no file is mentioned then trans.log is default directory for the log.
    R3trans also can be used for the database backup.
    R3trans u2013ba: This command is used for a complete backup. we will see in the next paragraph how to use
    the control file for the backup.
    R3trans u2013bd: This command is used for a delta backup if the user does not want a complete backup.
    R3trans u2013bi: This option will display backup information.
    The following are some of the examples of control files:
    We have already learned how to use a command for the logical backup of the objects in the database. To get a complete backup the following example control file can be used.
    backup all
    file = /usr/sap/trans/backall
    The option u201Cfile = u2026u201D is the name of the directory into which the data files are to be written. If you are taking a complete backup of DEV system then the backup file is going to look like u201CDEV.A000.bcku201D the next complete
    Reward if useful
    Regards
    divya

  • Question about Classes, Abstract  Classes and Interfaces.

    I have been experimenting with Classes, Abstract Classes and Interfaces and wonder if anyone can explain this to me.
    I was looking for a way to assign a value to a variable and then keep it fixed for the session and have devised this.
    First I create an abstract class like this:
    public abstract class DatabaseConnection {
    private static String ServerName = null;
    public static void setServerName(String serverName) {
              ServerName = serverName;
         public static String getServerName() {
              return ServerName;
    }and then I created an interface
    public interface DatabaseAccess {
         String servername = DatabaseConnection.getServerName();
    }And finally the class itself with some test lines in it so I could see what was going on:
    public class CreateDatabase extends DatabaseConnection implements DatabaseAccess {
         public static void main (String args[]){
              new CreateDatabase();
         public CreateDatabase(){     
              setServerName("Server Name 1");
              System.out.println ("Before update ");
              System.out.println ("ServerName from Interface           = " + servername);
              System.out.println ("ServerName from Abstract Class = " + getServerName());
              System.out.println ("After update ");
              setServerName("Server Name 2");
              System.out.println ("ServerName from Interface           = " + servername);
              System.out.println ("ServerName from Abstract Class = " + getServerName());
              System.out.println ("==========================");
    }The output I get from the above is:
    Before update
    ServerName from Interface           = Server Name 1
    ServerName from Abstract Class = Server Name 1
    After update
    ServerName from Interface           = Server Name 1
    ServerName from Abstract Class = Server Name 2
    ==========================I also tried this in another class which calls the above class to see if I get the same effect
    public class CheckDatabaseAccess {
         public static void main (String args[]){
              new CreateDatabase();
              CreateDatabase.setServerName("Server 3");
              System.out.println("CreateDatabase "+CreateDatabase.servername);
              CreateDatabase.setServerName("Server 4");
              System.out.println("CreateDatabase "+CreateDatabase.servername);
              CreateDatabase.setServerName("Server 5");
              System.out.println("CreateDatabase "+CreateDatabase.servername);
    }The output of which is this:
    Before update
    ServerName from Interface           = Server Name 1
    ServerName from Abstract Class = Server Name 1
    After update
    ServerName from Interface           = Server Name 1
    ServerName from Abstract Class = Server Name 2
    ==========================
    CreateDatabase Server Name 1
    CreateDatabase Server Name 1
    CreateDatabase Server Name 1Can anyone explain why I appear to only be able to change or set the ServerName only the once?
    Is this the correct way to do it? If it is it's exactly what I am looking for, a way to set the value of variable once in a session and then prevent it being changed.
    Or is there a better way of doing this.
    What I want to use this for is for example, storing the accesses to a database on a server. I won't know what server the database will be stored on nor what the database is called so I create an INI file which stores this information in encrypted format, which is set by the database administrator. It occurs to me I can use this method to then retrieve that data once and once only from the INI file and use that throughout the life of the session to access the database.
    Any help appreciated
    Regards
    John

    Not gonna read all of it, but this jumps out:
    public abstract class DatabaseConnection {
    private static String ServerName = null;
    public interface DatabaseAccess {
         String servername = DatabaseConnection.getServerName();
    }You have two completely separate variables (with two different names, for that matter, since you were inconsistent in your capitalization, but it wouldn't make a difference if they did have the same name with the same case). And the one in the interface is implicitly public, static, and final.
    Anytime you refer to "servername" through a reference of type DatabaseAccess, it refers to the one declared in the interface.
    Anytime you refer to "ServerName" inside the DatabaseConnection class, it refers to the one declared in that class.

  • HFM Security Class and Security

    Hi All my Peers,
    Can any one explain me What is the difference between Security Class and Security

    No offense, but if you don't understand these concepts well enough, your CV should probably be sent a far distance if you are trying to get an experienced consulting position. Understanding security is an important piece to the puzzle, especially when dealing with large amounts of financial data.
    With that said.......
    Security - Generally speaking, the goal of security is to control access to data, objects, programs, etc. In the Hyperion sense, security is managed in multiple different ways :
    - Program Access : Only users who are linked to Hyperion's Shared Services AND have the proper provisioned rights can open a program. (i.e. HFM, Reports, Workspace, FDM, etc, etc, etc.)
    - Provisioning : There are different types of rights per program that a user can have. Provisioning is the act of assigning these rights. (i.e. HFM has multiple rights such as Appliation Administrator, Default, Provisioning Manager, etc.)
    - Data / Object Access : Even if you have the right to enter the program, there is generally another layer of security which controls what you can do. For instance, inside of HFM, you can configure security for objects such as Data Forms and Data Grids. Furthermore, you can limit the user's ability to change or view data for specific entities, accounts, as well as other dimensions.
    - Security Classes : The security classes that you assign in the metadata are used during the act of assigning the Data / Object access controls. Users (and Groups) and assigned View Only, All (Read/Write), or None access to HFM Security Classes.
    This is a ridiculously high level overview. To get a much better understanding, I strongly recommend that you read the product documentation for the specific products you are using. If you are using 11.1.2.1 / HFM, here are a couple of documents that are of value :
    http://docs.oracle.com/cd/E17236_01/epm.1112/hfm_admin.pdf - Administrators guide which has a section on security.
    http://docs.oracle.com/cd/E17236_01/epm.1112/hfm_user.pdf - Users' guide which talked to security in terms of forms/ grids
    General System 11 doc : http://docs.oracle.com/cd/E17236_01/nav/portal_5.htm
    Hope that helps

  • Can I use classes and methods for a maintenance view events?

    Hello experts,
    Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!

    Hi viraylab,
    1. The architecture provided by maintenance view
       for using EVENTS and our own code inside it -
       It is provided using FORM/PERFORM
       concept only.
    2. At this stage,we cannot use classes.
    3. However, inside the FORM routine,
       we can write what ever we want.
       We can aswell use any abap code, including
       classes and methods.
      (But this classes and methods won't have any
       effect on the EVENT provided by maintenance view)
    regards,
    amit m.

  • What is the diff b/w Abstract class and an interface ?

    Hey
    I am always confused as with this issue : diff b/w Abstract class and an interface ?
    Which is more powerful in what situation.
    Regards
    Vinay

    Hi, Don't worry I am teach you
    Abstract class and Interface
    An abstract class can have instance methods that implement a default behavior. An Interface can only declare constants and instance methods, but cannot implement default behavior and all methods are implicitly abstract. An interface has all public members and no implementation. An abstract class is a class which may have the usual flavors of class members (private, protected, etc.), but has some abstract methods.
    Edited by SASIKUMARA
    SIT INNOVATIONS- Chennai
    Message was edited by:
    sasikumara
    Message was edited by:
    sasikumara

  • What is the field and Table for "Batch Class" and "Class Type" in QM.

    Hi All,
    What is the field and Table for "Batch Class" and "Class Type" in QM.
    Thanks,

    Hi,
      For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
    And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
    In INOB table, for batch class, you need to give 023 in KLART field and  value MCH1 in OBTAB filed.
    Please check this and let me know if this you need any more details?

  • Using java class and variables declared in java file in jsp

    hi everyone
    i m trying to seperate business logic form web layer. i don't know i am doing in a right way or not.
    i wanted to access my own java class and its variables in jsp.
    for this i created java file like this
    package ris;
    import java.sql.*;
    import java.sql.Connection;
    import java.sql.DriverManager;
    import java.sql.SQLException;
    public class  NewClass{
        public static void main(String args[]){
            Connection con = null;
            ResultSet rs=null;
            Statement smt=null;
            try{
                Class.forName("com.mysql.jdbc.Driver").newInstance();
                con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
                smt=con.createStatement();
               rs= smt.executeQuery("SELECT * FROM emp");
               while(rs.next()){
                String  str = rs.getString("Name");
                }catch( Exception e){
                    String msg="Exception:"+e.getMessage();
                }finally {
          try {
            if(con != null)
              con.close();
          } catch(SQLException e) {}
    }next i created a jsp where i want to access String str defined in java class above.
    <%--
        Document   : fisrt
        Created on : Jul 25, 2009, 3:00:38 PM
        Author     : REiSHI
    --%>
    <%@page import="ris.NewClass"%>
    <%@page contentType="text/html" pageEncoding="UTF-8"%>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
       "http://www.w3.org/TR/html4/loose.dtd">
    <html>
        <head>
            <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
            <title>JSP Page</title>
        </head>
        <body>
            <h1><%=str%></h1>
        </body>
    </html>I wanted to print the name field extracted from database by ResultSet.
    but it gives error cannot find symbol str.
    please help me to find right way to do this.
    i am using netbeans ide.

    Very bad approach
    1) Think if your table contains more than one NAMEs then you will get only the last one with your code.
    2) Your String is declared as local variable in the method.
    3) You have not created any object of NewClass nor called the method in JSP page. Then who will call the method to run sql?
    4) Your NewClass contains main method which will not work in web application, it's not standalone desktop application so remove main.
    Better create an ArrayList and then call the method of NewClass and then store the data into ArrayList and return the ArrayList.
    It should look like
    {code:java}
    package ris;
    import java.sql.*;
    import java.sql.Connection;
    import java.sql.DriverManager;
    import java.sql.SQLException;
    public class  NewClass{
        public static ArrayList getNames(){
            Connection con = null;
            ResultSet rs=null;
            Statement smt=null;
            ArrayList nameList = new ArrayList();
            try{
                Class.forName("com.mysql.jdbc.Driver").newInstance();
                con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
                smt=con.createStatement();
               rs= smt.executeQuery("SELECT * FROM emp");
               while(rs.next()){
                nameList.add(rs.getString("Name"));
               return nameList;
                }catch( Exception e){
                    String msg="Exception:"+e.getMessage();
                   </code><code class="jive-code jive-java"><font>return nameList;</code><code class="jive-code jive-java">
                }finally {
          try {
            if(con != null)
              con.close();
          } catch(SQLException e) {}
          </code><code>return nameList;</code>
    <code class="jive-code jive-java">    }

  • Customizing FD01 and FB70 using PS Class and Characteristics

    Hello SAP Experts
    I have the following issue:
    My client has a requirement where we need to customize the Customer Master  (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS class and characteristics. Your opinions would be much appreciated.
    Please kindly give your suggestions. Thanks in advance
    Regards,
    Nik

    Joao Paulo,
    Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
    Nik

  • FM/Class to find the class and characterstics for a given material

    Hi All,
    Is there any Class/FM to find the class and characterstics for a given material.I tried some BAPI_OBJCL* BAPI's but lot of the BAPI's need classnum as input parameter. But i need a BAPI or tables or class which can give the class and its characterstic values for a given material.

    Hi Ben
             Try ..
    BAPI_OBJCL_GETCLASSES
    BAPI_OBJCL_CREATE

  • XML file in the form of .config file how to convert it to class and store it in single object

    Hi,
    I have a config file in which i have to convert it to class and get an object.
    example:
    <?xml version="1.0" encoding="utf-8" ?>
    <xyz xmlns="">
      <Container name ="Basic">
        <Connectivity user="" server="" protocol="udp"/>
        <Connectivity user="" server="" protocol="udp"/>
      </Container>
      <Container name ="Cp">
        <settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
          <domain name="audio">
            <section name="headset">
              <setting name="audio_in_agc_enabled " value="1"/>
            </section>
            <section name="incoming">
              <setting name="use_agc" value="1"/>
            </section>
            <section name="vad">
            </section>
          </domain>
          <domain name="system">
            <section name="qos">
              <setting name="audio" value="tos 46"/>
            </section>
            <section name="dtmf">
              <setting name="force_send_in_band" value="0"/>
              <setting name="minimum_rfc2833_play_time" value="40"/>
            </section>
            <section name="network">
              <setting name="dtx_enabled" value="0"/>
            </section>
            <section name="diagnostics">
              <setting name="enable_logging" value="1"/>
              <setting name="log_level" value="Error"/>
            </section>
            <section name="general">
              <setting name="add_OS_version_to_user_agent_header" value="1"/>
            </section>
            <section name="indialog_notify">
              <setting name="enable_indialognotify" value="1"/>
            </section>
          </domain>
          <domain name="rtp">
            <section name="2833">
              <setting name="enabled" value="1"/>
              <setting name="packet_time_in_ms" value="60"/>
              <setting name="payload_number" value="101"/>
            </section>
            <section name="inactivity">
              <setting name="timer_enabled" value="0"/>
            </section>
          </domain>
          <domain name="proxies">
            <section name="proxy0">
            </section>
            <section name="proxy1">
            </section>
          </domain>
          <domain name="ggg">
            <section name="device">
              <setting name="use_headset" value="1"/>
              <setting name="rrr" value="1"/>
              <setting name="eee" value="480"/>
              <setting name="eme" value="hhh"/>
              <setting name="headset_name" value="vvv"/>
              <setting name="manual_audio_devices_configure" value="0"/>
              <setting name="audio_in_device" value=""/>
              <setting name="audio_out_device" value=""/>
              <setting name="ringer_device" value=""/>
            </section>
            <section name="system">
              <setting name="export_settings" value="EndpointSettings.xml"/>
              <setting name="enable_export_settings" value="0"/>
              <setting name="log_level_AbstractPhone" value="0"/>
              <setting name="log_level_Audio" value="0"/>
              <setting name="log_level_Auto Configuration" value="0"/>
              <setting name="log_level_CCM" value="0"/>
              <setting name="log_level_Conferencing" value="0"/>
              <setting name="log_level_Contacts" value="0"/>
              <setting name="log_level_DNS" value="0"/>
              <setting name="log_level_GUI" value="0"/>
              <setting name="log_level_Jitter" value="0"/>
              <setting name="log_level_Licensing" value="0"/>
              <setting name="log_level_Media" value="0"/>
              <setting name="log_level_Privacy" value="0"/>
              <setting name="log_level_RTP" value="0"/>
              <setting name="log_level_STUN" value="0"/>
              <setting name="log_level_Security" value="0"/>
              <setting name="log_level_Storage" value="0"/>
              <setting name="log_level_Transport" value="0"/>
              <setting name="log_level_USB Devices" value="Info"/>
              <setting name="log_level_Utilities" value="0"/>
              <setting name="log_level_Video" value="0"/>
              <setting name="log_level_Voice Quality" value="0"/>
              <setting name="log_level_XMPP" value="0"/>
              <setting name="log_level_Endpoint" value="6"/>
            </section>
            <section name="beeptone">
              <setting name="play_locally" value="0"/>
              <setting name="enable_beeptone" value="1"/>
              <setting name="beeptone_file" value="beep.wav"/>
              <setting name="beeptone_timeout" value="30000"/>
            </section>
            <section name="dtmf">
              <setting name="play_locally" value="1"/>
              <setting name="pause_start_stop_dtmf" value="100"/>
            </section>
            <section name="control">
              <setting name="auto_answer" value="0"/>
            </section>
            <section name="ctrol">
              <setting name="auto_ans" value="0"/>
            </section>
          </domain>
        </settings>
      </Container>
    </xyz>
    Please help me out in creating an object from it.
    Thanks,
    Hiranmayee

    It's one of those things you usually start from the other end.
    IE with a class and then serialise / deserialize to xml.
    Because you have a namespace in there:
    <settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
    I think you will find linq to xml will have issues with that.
    You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
    Why do you want to turn that into an object?
    By the way.
    This isn't a wpf question and you should probably have posted it on the c# forum.
    Hope that helps.
    Recent Technet articles: Property List Editing;
    Dynamic XAML

  • Write message to Job log with message class and message number

    hi folk,
    When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
    In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
    Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
    Please advice how to write a message with the message class and message number.
    Best regards
    LinhNg

    Hi Linh,
    How did you provide the text "Some message"? Did you hard code it or used a text element?
    Regards,
    Immanuel.

  • Can I use iCloud to since many users to one account for my business and have me as a administrator to oversee and change peoples calendars?

    Can I use iCloud to since many users to one account for my business and have me as a administrator to oversee and change my employees calendars and contacts??

    Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID?   (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud.  Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)

  • Class override, how to create the child class and then the base class

    I started to write a program for a smart DMM, the problem is every version of the DMM the company change the communication commend.
    My idea is to write a child class for every DMM version and every SubVI of the child will override the base class SubVI.
    My problem is, i want first to create one child class and after i will see every thing is work,  start to create the base class. that way i will see if am thinking the right way.
    My question is
    How can i create a child class and then create the base class and configure the SubVi of the child class to be Override of the base class?
    I tried to search in the property of the class but i didn't see nothing.
    Thanks
    Solved!
    Go to Solution.

    This can be done and I've done it on occasion.
    You simply create the base class with the dynamic dispatch methods you require (connector panes need to be identical to thos of the child class).
    Then set the inheritance of the class to inherit from this base class.  If your method is defined as a dynamic dispatch method in the parent, you'll most likely now have some errors (unless your child method was already DD in which case you might just be OK already).
    To change the inheritance of a class, right-click the properties of the class in your project and select properties.  I believe the ineritance tree is at the lower end of the properties.  Click on the "change inheritance" (or something similar) to choose the class from which you now wish to inherit.
    Say hello to my little friend.
    RFC 2323 FHE-Compliant

  • How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    Vera,
    Use View > View Options, and set 'Sort By" to "Manual Order."
    Then you will be able to drag-n-drop songs up and down the list.

Maybe you are looking for

  • Error copying files from flash drive

    I'm not entirely sure this is a Windows compatibility problem, but it seems plausible. We have an external USB drive that is used to carry files back and forth between home, where we have a MacBook, and my husband's job, where he has a Windows machin

  • Script for folder or file that always has a name that is the CURRENT DATE

    hi all, i tried to get this done a couple times and i either misunderstood how to use the script or there was some complication so i am returning to it. i would like to have a FILE or a FOLDER on my desktop that has a name which is TODAYS DATE. the r

  • Time Remapping - Need help

    I've been playing with this for a while and I just can't figure it out.  In the AE Help it shows keyframes being moved up and down with nice straight lines maintained between them, but when I do it I get bezier handles that produce crazy curves which

  • New operating system and now itunes library is blank. How can I get it back?

    My computer got messed up and I ended up having to get a new operating system put on it. Now my itunes library is blank and my ipod says it can't synch (obviously) because it doesn't recognize the library. How do I get my old library back?

  • HT1657 is it possible to rent a movie and play it on a TV without Apple TV?

    wanted to rent a movie and watch in a big screen, but don't have apple tv.  i do have the HDMI adapter for the miniport. it is possible to use?