Administrative vs Operational responsibilities

<p>
Hello,
</p>
<p>
I have been working my way through the WebLogic Administrators course material. This is a course I have delivered a number of times in the past but this time I am compiling a list of questions for each module.
</p>
<p>
In module 2, section Why use Domains three examples of what domains can separate are given, these are:
</p>
<ol>
<li>Development, test and production applications.</li>
<li>Administrative and operational responsibilities.</li>
<li>Organizational or business divisions.</li>
</ol>
<p>
1 and 3 I understand and have seen implemented on many sites but 2 seems bogus to me. While I suppose one can separate Administrative and Operational responsibilities there must be a large overlap between these and more to the point I fail to understand why anyone would want to create domains along these lines.
</p>
<p>
Can anyone explain what the thinking behind this is?
</p>
<p>
Hussein Badakhchani,</br>
www.orbism.com
</p>

Hi,
Operational Reporting:
Involves OLTP systems like a SAP R/3 System
Your reporting needs are mostly informational
You do 2 dimensional analysis here
Systems are write optimised. so, reporting is limited in nature
For day to day operations
Ex: You view revenue and you have customer & region as references
Analytical Reporting:
Involves OLAP systems like a SAP BW System
Your reporting needs are for processing
You do multi dimensional analysis here
Systems are read optimezed. so, reporting is flexible in nature.
For Long term informational requirements / decision support
Ex: You view revenue & you can have many characteristics as references
Regards,
Habeeb

Similar Messages

  • What will be the netweaver administrator's daily responsibilities?

    Hi, My company is recently moving to SAP and I will be the SAP netweaver administrator. Can you give me some basic idea what is the netweaver administrator 's daily task ? What kind problem I will face and solve? I need a general guideline for what responsibilities of the admin? Thanks,

    You can get the completed information from below links.
    http://help.sap.com/saphelp_nw70/helpdata/en/45/dc863f455f3417e10000000a114084/frameset.htm
    Administration
    Thanks,
    Mahendra

  • What would be SharePoint Administrator's job responsibilities ?

    Hi,
    Could you please describe in details. Do not say it depends. 
    I would like to know as per the best practice in a Medium large organization (10000 Employee), what should be SP Admin job responsibility? Also need to know what does not belong to? 
    As per my understanding, SP Admin is supposed to be involved in Infrastructure Management Activities ( Like Farm, Central Admin, and aware of OOB functionalities) but not in Custom code /Template fixes.
    Because sometimes it creates confusion Employer hires people as a SP Admin and later due to BAD code practice or development activities, they are being forced to resolve custom code related issues?  My question is this fair as per the Microsoft Recommended
    Practice?    
    Thanks
    srabon

    Hi Srabon,
    I'm always wary of these sorts of questions in technical forums as each answer given is entirely subjective and based on each poster's experiences.
    I'd agree with both John and Alex. You can question ANY SharePoint job description as soon as it's given to the market.  Boundaries get blurred and expectations on what an admin / developer / IT professional / whoever should be doing gets obsecured.
    Lets turn this round.  What angle are you approaching this from?  Someone with an SP Admin job, or someone that's applying for one?
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • OAS  System Administrator (Full-time job) - Santa Monica, CA

    Greetings,
    I am a hiring manager at a successful e-commerce company based in Santa Monica, CA who is looking for talented system adminstrators with Oracle Application Server experience.
    Our company has created a complete business-to-business e-commerce application built upon Oracle's complete suite of products. We are looking for two positions to support this envrionment, one senior one junior. Training and/or relocation is available for the right candidate.
    If you are interested in applying for this position please feel free to email me your resume to [email protected] include "Unix Systems Administrator - Application Operations EIS" in the subject line.
    Thanks,
    Jeremy Przygode
    Director of Application Operations & Support
    Edmunds.com
    The job description follows:
    Major Responsibilities
    * Help architect, design, implement and document all production and pre-production application environments. Work with application architects and software engineers to define requirements and standards. Develop and implement plans for deploying new services in a highly automated environment.
    * Ability to design and build tools to support a dynamic production website
    * Provide day to day operational support for all production and pre-production applications
    * Play leadership role in project planning, design and implementation of new services and applications
    * Work with teams to improve manageability of internally developed applications
    * Be knowledge expert on various third party applications (especially Oracle Application Suite)
    * Release internally developed applications across many environments
    * Work with teams to investigate and improve security as it relates to applications and processes
    * Participate in 24x7 on-call support for the company’s production systems
    * Actively participate in the development and improvement of a monitoring system(s)
    * Maintain effective working relationships with other IT Staff members, internal customers and technical staff at collocation providers
    * Mentor junior staff on technology and best practices
    * Ability to anticipate and proactively manage issues before they become major problems
    Required Skills
    * In-depth system administration experience with Linux or Solaris operating systems running e-commerce applications
    * Experience maintaining and deploying environments with Oracle Application Suite and Oracle database servers
    * Strong knowledge of Unix shell scripting
    * Production website operational experience
    * Experience working with ticketing systems and change management processes
    * Ability to be a member of a close-knit team that shares responsibilities for all areas it supports
    * Excellent verbal and written communication skills, including the ability to produce usable and maintainable documentation
    * Demonstrate problem solving abilities and initiative
    * Ability to deliver projects on schedule
    * Strong knowledge of networking as it relates to systems, security and availability
    * Ability to provide a professional interface to internal and external customers and vendors
    Preferred Skills
    * Extensive Oracle Application Suite experience (Oracle OID, BPEL, Portal, Toplink, OC4J, OEM)
    * Strong scripting and automation experience
    * Light Oracle database administration experience
    * Linux certification or Linux expert
    * Network Operations experience
    * Operational experience with Oracle 9i and 10g databases on Linux
    * Knowledge of networking and HA technologies, like F5 Labs BigIP?
    * Windows application knowledge and familiarity with Windows Server (AD) infrastructure
    * Must understand risk management practices and how they apply to service level agreements
    * Experience with ITIL processes

    My Craigslist post expired so here are the contents.
    I am currently accepting new contracts for my consulting business. I
    offer an extensive range of services oriented around the LabView
    software and National Instruments hardware. Circuit design for
    integration of external transducers and control units is also
    available. I can do PCB layouts and fabrication for professional
    quality circuit construction. Signal processing and data analysis are
    also my forte.
    I am employed full-time so the scope of the project must be such
    that my participation is limited to weeknight evenings and weekends. I
    live in the East Bay and willing to travel during the weekends.
    I have a PhD in bioengineering from UC Berkeley and roughly 8 years
    of experience within the services I offer. I will give you an honest
    judgment if the project scope is within my ability and if your time
    frame is achievable with a nights & weekends effort.
    My services are offered at a competitive market rate.
    bnjohnso
    at
    socrates
    dot
    berkeley
    dot
    edu

  • Different applications context in iStore

    Vi have implemented severel minisites in iStore and have a question regarding using different context for different minisites.
    Is it possible to configure the iStore in a way that different minisites can have different applications context?
    For instance:
    Insted of using common URL like
    http://server.domain.com/OA_HTML/ibeCZzpHome.jsp?a=b
    We wnat to use
    http://server.domain.com/OA_DOGS/ibeCZzpHome.jsp?a=b
    http://server.domain.com/OA_CATS/ibeCZzpHome.jsp?a=b
    So OA_DOGS always refer to a perticular miniSite (minisite=10020)
    and OA_CATS always refer to another miniSite (minisite=10021)
    Thanks Mayu

    you were not asking for a seperate ministed for different users instead ur asking for a different applications under one single domain.
    but we can have any number of minisites to address your need, just need to create them using iStore Admin responsibility, if you want to restrict some of the users to access to some of the minisites only then go for responsibility key / operating unit differentiation or see CRM Administration - Roles and Responsibilites to implement the requirement.
    there you can define 2 different responsibilities like IBE_CUSTOMER_DOGS who can only access the sites you allow him in iStore Admin, IBE_CUSTOMER_CATS allowed to see only minisites meant for CATS .
    thanks
    Praveen Reddy

  • ISE 1.2 Guest Report based on specific Guest IP Address

    Hi
    I have a simple requirement which I am not able to find the way. Maybe someone can help me out.
    I have a WLC / WiSM2 (7.5) Guest Controller and ISE 1.2 (Patch5) in production with only CWA for Guest Access.
    Since I should create a query based on the Guest's IP Address, I tried to find a way to do so. But the "Guest Activity" report is empty (I do not have a cisco ASA with URL logging in place).
    If I do a "Guest Accounting" Report, I am able to see the IP Address attribute per user (so the data is there). But there is no way to filter on that coloum (neither thorugh the filter button which only allows to filter on Endpoint ID and/or Identity, nor is there an option like in ACS 5.x to do an Interactive search).
    Any help?
    The Authentication tab would do the job as well, but there are no filterable time ranges....
    Thanks!

    If anybody get into the same isse, I got an answer from cisco to this, what I found out as well as a possible, but not very handy way:
    "A workaround is to configure a remote syslog target to capture logging category Administrative and Operational Audit and filter and parse the logs accordingly."

  • Installing Office Web Apps Server 2013 fails with app-crash during install.

    Hi Folks,
    I am trying to install Office Web Apps Server 2013 with SP1 on Server 2012 R2.  The installation gets half way through then crashes (it just says a problem has occurred).
    The Event log only contains the message:-
     MsiExec.exe version .5.09....
    Faulting module name: Kernelbase.dll
    Exception Code 0x306d7363, Faulting process id: 0x774.
    Does anyone know how to install this product on Server 2012 R2?

    Hi,
    I’m afraid that this case is off-topic in this forum, About installation of Office Web Apps Server 2013, I suggest you posting your case to
    SharePoint 2013 - Setup, Upgrade, Administration and Operations .
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Analysis Authorization not working - Empty demarcation

    Can someone help me on this Analysis Authorization? I read many threads in SDN, it seems that I followed the correct steps. The restriction on S_RS_COMP is working well but the restriction on the Analysis Authorization is not working. Surely I'm making some mistake, but can't find what's wrong.
    I'm a User (say USER_00) in a test system, assigned to a Role (say Z:BI_USER). This is a broad role:
    - S_RS_COMP and S_RS_COMP1 have full authorization (*) to all the fields,
    - S_RS_AUTH has the BIAUTH field with Name of Authorization = *.
    Also I have an InfoArea (ZIA_TEST) and an InfoCube (ZIC_TEST). The IC has some characteristics and key figures. The only authorization relevant characteristic is ZCA_CLI (client). The IC has only 5 lines, one for each client ("CLI_01" to "CLI_05").
    Also there's a query (ZQR_TEST) on this IC, with an Authorization Variable (VAR_AUTH_CLI) restricting the characteristic ZCA_CLI.
    I'm trying to create a new User and restrict him to this IC and only to the data of client "CLI_01". If it works I'll apply to a production system.
    What I did:
    1) With tcode SU01 created a new User (USER_01) with no Role neither Analysis Authorization.
    2) With tcode PFCG copied the Role Z:BI_USER as Z:ROLE_TEST then made some changes:
    a) S_RS_COMP
    - Activity = 03 and 16
    - InfoArea = ZIA_TEST
    - InfoCube = ZIC_TEST
    - Type of report component = *
    - Name of report component = *.
    b) S_RS_COMP1
    - Kept * to all fields.
    c) S_RS_AUTH
    - I inactivated and deleted this Authorization Object.
    (I don't want to keep characteristic values restriction inside the role. The idea is to associate different users to the same role, allowing them to see the same ICs and execute the same queries. And differentiate wich characteristic values each one can see by manually associating different analysis authorization to each one.).
    3) With tcode RSECAUTH I created an Analysis Authorization (Z_AA_CLI_01) to restrict access only to client "CLI_01":
    - ZCA_CLI = "CLI_01"
    - 0TCAACTVT = "03"
    - 0TCAIPROV = "ZIC_TEST"
    - 0TCAVALID = "*".
    4) With tcode PFCG I assigned User "USER_01" to the Role " Z:ROLE_TEST" and made Complete Comparison.
    5) With tcode RSU01 I manually assigned Analysis Authorization " Z_AA_CLI_01" to User "USER_01".
    It seems to me that these steps are enough. But:
    a) When I log as USER_00 and go to tcode RSRT2, searching by InfoAreas I can see all the InfoAreas and all the InfoCubes, select and execute the query. That's OK.
    b) When I log as USER_01 and go to RSRT2, searching by InfoAreas I can see only ZIA_TEST and under it I can see only ZIC_TEST. That's OK. Then I select and execute the query.
    Wich means that S_RS_COMP is OK and each user is assigned to the correct Role.
    c) The problem is that in both cases the query brings data from all Clients.
    Under Information and Variable Values (when I run with HTML display) the message is "Empty demarcation".
    I changed the variable to be Ready for Input, just to see wich values it brings. In both cases (as USER_00 and as USER_01) in the Variable Screen it brings all the 5 Clients from the IC and I can select and execute any value.
    So the problem is with the Analysis Authorization or with the Variable, but I can't find what's wrong.
    Any help will be very appreciated.
    César

    OK Marc, it worked.
    Sorry for not answering earlier, but I could get back to this front only some days ago, then began testing your suggestions.
    1) Security Concept
    Authorization Mode was set to "Obsolete Concept with RSR Authorization Objects" (it would never work with this setting).
    I changed to "Current Procedure with Analysis Authorizations".
    Anyway, what's the function of this setting? Do old Reporting Authorizations work with "Current Procedure with Analysis Authorizations" setting?
    2) Variable Representation
    With "Multiple Single Values" it really led to problems.
    With "Selection Option" it worked well.
    3) 0TCAKYFNM
    I don't understand why, but if the AA doesn't have the char/dimension 0TCAKYFNM, when the User tries to run the query (tcode RSRT2) it accuses "You do not have sufficient authorization".
    Info Cube ZIC_VE95 has two KFs (ZKF_QTL95 and ZKF_VLT95). These KFs are used only on this IC (also in the KF Catalog, but it doesn't impact). This IC is used only on Query ZQR_VE95 (also in Transformation and DTP, wich doesn't impact).
    Well, I inserted 0TCAKYFNM and it worked, either with CP, "*" or with EQ, the two KFs.
    4) Authorization Policy Definition
    The situation I'm working on is very typical. Ex.: Some users are Administrators, Managers, Operator 1, Operator 2 and so on. Each Role needs authorization to access some queries. At the same time, they can access information only of the Cost Centers to wich they are related.
    There are many ways to implement it (I tested some of them and they worked well). My point is to define a most practical way, easy to understand and to maintain.
    I'm now sympathetic to this way:
    a) Create functional Roles (ex.: "Administrator", "Manager", "Operator 1", "Operator 2" and so on) defining only the Queries (or Info Areas, Info Providers, etc) each Role needs. No S_RS_AUTH definition.
    b) Create Char Value Roles (ex.: "CC_100_to_199", "CC_200_to_299", etc), only with S_RS_AUTH definition, each one associated with a corresponding AA (ex.: AA for CC 100 to 199, AA for CC 200 to 299 and so on).
    c) Create Composite Roles associating functional and char value Roles. Ex. Composite Role "Administrator for CC 100 to 199", composed of the Roles "Administrator" and "CC_100_to_199".
    d) Associate Users to the Composite Roles.
    Anyway, I'd appreciate if you could indicate some literature (blogs, articles, etc) on this theme.
    Well, thank you very much for your answers. Now I can go on with my studies on this subject.
    César Menezes

  • What are the importent transaction codes in edi

    what are the importent transaction codes in edi

    hi,
    =>sale - ALE Customizing
    =>bale - Distribution Administration (ALE)
    =>wedi - IDOC Type and EDI Basis
    =>shdb - BDC (Transaction Recorder)
    =>lsmw - LSMW
    =>bapi - BAPI
    =>spau - Display Modified DE Objects
    =>spdd - Display Modified DDIC Objects
    =>sara - central idoc archiving
    =>stms - Transport Management System
    =>wedi - IDOC Type and EDI Basis (IDOC Configuration)
    =>bd21 - Analyze change pointers - create IDOC from change pointer
    =>bd10 - Send Material Master
    =>bd12 - Send Customer Master
    =>bd14 - Send Vendor Master
    =>bd50 - Activate Change Pointer for Message Type
    =>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
    =>bd54 - Maintain Logical Systems
    =>bd71 - Distribute Customer Model
    =>bd87 - Process Inbound IDOCs
    =>bd88 - Process Outbound IDOCs
    =>bdm2 - Cross-system IDOC Reporting
    =>bdm7 - ALE Audit - statistical analyses
    =>bdm8 - ALE Audit - sending confirmations
    =>bd61 - Activate Change Pointer generally
    =>bmv0 - Direct Input Data Transfer Administration
    =>rz04 - Operation Mode
    =>rz12 - RFC Server Group Maintenance
    =>sar3 - Archiving object customizing
    =>s001 - SAPoffice Inbox
    =>s010 - Standards Texts (SAP Script)
    =>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
    =>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
    =>se78 - Administration of Form Graphics (Import Graphics into SAP System)
    =>se84 - ABAP Repository Information (search for SAP objects)
    =>su01 - User Maintenance (Security)
    =>su02 - Maintain Authorization Profiles
    =>su03 - Maintain Authorizations
    =>sm36 - Background Job Scheduling
    =>sm37 - Background Job Monitoring (display batch jobs)
    =>sm31 - Table Maintenance
    =>sm30 - Calling View Maintenance
    =>sm35 - Batch Input Monitoring (Error Logs)
    =>sm50 - Process Overview
    =>sm58 - Transactional RFC Monitoring
    =>sm59 - Maintain RFC Destinations (Define RFC Configuration)
    =>snro - Number Range Objects (for IDOCs)
    =>we02 - Display IDOC
    =>we05 - IDOC lists
    =>we07 - IDOC statistics
    =>we12 - Inbound processing of outbound file - convert outbound to inbound file
    =>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
    =>we15 - Outbound IDOC from NAST - message control
    =>we16 - Inbound File
    =>we18 - Generate status file
    =>we19 - Test tool
    =>we20 - Add new Message Type to Partner Profile
    =>we21 - Maintain Port Definition
    =>we30 - IDOC Type development
    =>we31 - IDOC Segment development
    =>we41 - Process Code Outbound
    =>we42 - Process Code Inbound
    =>we46 - IDoc Administration
    =>we47 - Status Code Maintenance
    =>we57 - Assign function module to logical message and IDoc type
    =>we63 - IDOC Type for Parser Output
    =>we82 - Assign IDOC to Message Type
    =>we60 - IDOC Documentation - IDOC Types
    =>we61 - IDOC Documentation - IDOC Record Types
    =>we81 - Create new IDOC Message Types
    =>we82 - Assign IDOC to Message Type
    =>pa20 - Display HR Master Data
    =>pa30 - Maintain HR Master Data
    =>bd59 - Create and assign Filter Object Type for Message Type
    =>bd64 - Maintenance of ALE or any other Distribution Model
    Hope this helps, Do reward.

  • Oracle 9.0.1 with RH9.0  ./runInstaller

    Hi!!
    I am trying to install Oracle 9i with RH9.0 but I have a problem when I execute ./runInstaller
    Itializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait...
    /tmp/OraInstall/jre/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Unable to initialize threads: cannot find class java/lang/Thread
    Could not create Java VM
    What can I do, please??
    My machine is
    - 512Mb Ram
    - 40Gb Disk space
    - java version "1.3.1"
    Java(TM) 2 Runtime Environment, Standard Edition (build Blackdown-1.3.1-FCS)
    Java HotSpot(TM) Client VM (build Blackdown-1.3.1-FCS, mixed mode)
    Thanks

    Hi,
    I found alike problem in Metalink:
    From: CESAR AUGUSTO RENGIFO 01-Jun-03 23:53
    Subject: problem intalling Oracle 8.1.7 in Red Hat 9
    problem intalling Oracle 8.1.7 in Red Hat 9
    hi, i am tried to install Oracle 8.1.7 Standard Edition in Red Hat 9, but the installer dont initialize.
    the error when i run runInstaller is:
    "Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
    [oracle@localhost Disk1]$ /home/oracle/Disk1/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/linux/native_threads/libzip.so: symbol errno,
    version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Unable to initialize threads: cannot find class java/lang/Thread
    Could not create Java VM"
    the machine characteristics are:
    "Linux localhost.localdomain 2.4.20-8smp #1 SMP Thu Mar 13 17:45:54 EST 2003 i686 i686 i386 GNU/Linux"
    i had search through the installed packages for the glibc librarys and this is the result:
    "glib-1.2.10-10
    glibc-common-2.3.2-11.9
    glibc-2.3.2-11.9
    glib2-2.2.1-1
    glibc-devel-2.3.2-11.9
    glibc-kernheaders-2.4-8.10"
    thanks in advance,
    andrew
    From: Yonatan KOPEL 02-Jun-03 13:58
    Subject: Re : problem intalling Oracle 8.1.7 in Red Hat 9
    Ther is compatibility problem that happend with broken binaries
    errno shouldn't show up with binary or library compiled against glibc 2.1+
    You can use LD_ASSUME_KERNEL=2.4.1 (or 2.2.5) in the broken apps env
    to work around this.
    Jonathan Kopel
    From: RUDINEI RUFA N/A 10-Jun-03 22:11
    Subject: Re : problem intalling Oracle 8.1.7 in Red Hat 9
    May I can help you.... try to download a JRE latest version, install on /usr/local/java, and edit '/install/oraparam.ini', change the JRE location, and run the 'runInstaller' from '/install/linux'.
    Regards,
    Mauricio.
    [email protected]
    Support Analyst
    RH9 isn't certified for Oracle9i !!!
    Note:201370.1
    LINUX: Quick Start Guide - 9.2.0 RDBMS Installation
    Quick Start Guide Oracle9i Release 2 (9.2.0) RDBMS Installation Linux Operating System PURPOSE ======= This document is designed to be a quick reference that can be used when installing Oracle 9.2.0 on the Linux platform. It is NOT designed to take the place of the Installation Guide. It is recommended that users READ the installation guide. Instructions to locate that document are contained in Appendix A. A familiarity with the Linux Operating System is assumed. If Installation guide information is needed, please see the Appendix A at the bottom of this document for additional resources. Each step should be done in the order that it is listed. These steps are the bare minimum that is necessary for a typical install of the Oracle9i RDBMS. Verification of Version Certification: ====================================== Currently, Oracle 9.2.0 is certified ONLY on the following Intel Based Server Linux distributions: - Red Hat Advanced Server 2.1 - Suse SLES7, SLES8 - United Linux 1.0 For the latest certification and other related information, use the "Certify & Availability" link in Metalink. Installations on distributions and versions not listed in the Certify link is not supported. Pre-requisite Requirements for System Administrator: ==================================================== The following steps are required to verify your operating system meets minimum requirements for installation, and should be performed by the root user. For assistance with system administration issues, please contact your system administrator or operating system vendor. Use these steps to manually check the operating system requirements before attempting to install Oracle RDBMS software, or you may choose to use the convenient "Unix InstallPrep script" which automates these checks for you. For more information about the script, including download information, please review the following article: Note:189256.1 UNIX: Script to Verify Installation Requirements for Oracle 9.x version of RDBMS Users must have /bin/utils installed for the operating system. This is part of the developers option on RedHat Advanced Server 2.1. The Following Steps Need to be Performed by the Root User: 1. Configure System Resources: Ensure that the system has at least the following resources: ? 400 MB in /tmp * ? 512 MB of Physical Memory (RAM) ? Three times the amount of Physical Memory for Swap space (unless the system exceeds 1 GB of Physical Memory, where two times the amount of Physical Memory for Swap space is sufficient) * You may also redirect /tmp by setting the TEMP environment variable. This is only recommended in rare circumstances where /tmp cannot be expanded to meet free space requirements. 2. Create a Software Owner and Group: Create a Unix user and group that will own the Oracle software. (Typically user = oracle, group = dba) You may use a GUI tool for this if your distirbution provides one, or the 'useradd' and 'groupadd' command line utilities. Please make sure the user and group you use are defined in the local /etc/passwd and /etc/group files rather than resolved via a network service such as NIS. 3. Create a Software Mount Point and DataFile Mount Points: Create a mount point for the Oracle software installation (at least 2.5 GB, typically /u01) Create a second, third and fourth mount point for the database files, control files, and log files to be created (typically /u02, /u03, /u04). ? The oracle user should own these mount points and all of the directories below the mount point. 4. Test the Permissions: Ensure that the oracle user can write to the new mount points ? As a test, change directories to each of the new mount point directories as the oracle user and create a file or directory. Example: % touch /u01/test 5. Configure Kernel Resources: The following kernel parameters related to shared memory and semaphores will require tuning:      SHMMAX = 2147483648      SHMMIN = 1      SHMMNI = 100      SEMMNS = 1000      SEMMSL = 250      SEMMNI = 100      SEMOPM = 100 6.On Linux kernel parameters can be set dynamically or can be written in a shell script to be set at boot time. Kernel parameters should be set as the root user. They are set as follows 1.     cd /proc/sys/kernel 2.     Modify the parameter values by using the following command syntax: a.     # echo 100 32000 100 100 > sem           This sets SEMMSL, SEMMNS, SEMOPM, SEMMNI b.     # echo 2147483648 > shmmax c.     # echo 1 > shmmin d.     # echo 100 > shmmni ================================================================================ These changes are NOT persistent and must be re-set after each re-boot. On RedHat Advanced Server 2.1, these parameters can be entered into the file /etc/sysctl.conf. This parameters in this file are set each time the system is booted. Example:      $ more /etc/sysctl.conf      # Disables packet forwarding      net.ipv4.ip_forward = 0      # Enables source route verification      net.ipv4.conf.default.rp_filter = 1      # Disables the magic-sysrq key      kernel.sysrq = 0      kernel.shmmax=256000000      kernel.shmmin=1      kernel.shmmni=100      kernel.sem= 250 32000 32 128 7. Mount CD-ROM: Depending on your Linux distribution the cdrom device is typically either "/cdrom" or "/mnt/cdrom". Please substitute the appropriate value when "<cdrom>" appears in the examples. # mount <cdrom> Installs can be done from either the CD or by copying the contents of each CD?s to a stage area on the local disk (/stage/Disk1, /stage/Disk2, /stage/DiskN) 8.This is required to run as root: /tmp/orainstRoot.sh First question of oracle installation. If no other versions of Oracle 8i or 9i have been installed before. You will be ask to run /tmp/orainstRoot.sh to create the oraInventory location pointer. Usually found in /etc on Linux Files that are located in /etc are /etc/oratab and /etc/oraInst.loc Installation Steps for the Oracle User ======================================= The Following Steps need to be performed by the Oracle User: This can be done from either a Telnet or an SSH connection. It is NOT recommended to perform installations from a su ? oracle connection. 1. Set Environment Variables Environment variables should be set in the login script for the oracle user. If the oracle user's default shell is the C-shell (/usr/bin/csh), then the login script will be named ".login". If the oracle user's default shell is the Bourne-shell (/usr/bin/bsh) or the Korn-shell (/usr/bin/sh or /usr/bin/ksh), then the login script will be named ".profile". In either case, the login script will be located in the oracle user's home directory ($HOME). The examples below assume that your software mount point is /u01. Parameter Value ----------- ------ ORACLE_HOME /u01/app/oracle/product/9.2.0 ORACLE_BASE /u01/app/oracle PATH /u01/app/oracle/product/9.2.0/bin: /usr/ccs/bin:/usr/bin/X11/:/usr/local/bin and any other items you require in                     your PATH      ORA_NLS33          $ORACLE_HOME/ocommon/nls/admin/data ORACLE_SID Set this to what you will call your database instance. (4 - 8 characters in length)      If you are not on the console, you may need to set the following DISPLAY <ip-address>:0.0 (review Note:153960.1 for detailed information) ENSURE THAT CLASS_PATH IS NOT SET IN THE ENVIRONMENT 2. Set the umask: Set the oracle user's umask to "022" in you ".profile" or ".login" file. Example: umask 022 3. Verify the Environment Log off and log on as the oracle user to ensure all environment variables are set correctly. Use the following command to view them: % env | more Before attempting to run the Oracle Universal Installer, verify that you can successfully run the following command: % /usr/bin/X11/xclock If this does not display a clock on your display screen, please review the following article: Note:153960.1 FAQ: X Server testing and troubleshooting 4. Start the Oracle Universal Installer and install the RDBMS software: Use the following commands to start the installer: % cd /tmp % /cdrom/runInstaller Or cd to /stage/Disk1 and run ./runInstaller Respond to the installer prompts as shown below: ? When prompted for whether orainstRoot.sh has been run by root, enter "y". This should have been done in Pre-Installation step 8 above. ? At the "Welcome Screen", click Next. ? If prompted, enter the directory to use for the "Inventory Location". This can be any directory, but is usually not under ORACLE_HOME because the oraInventory is shared with all Oracle products on the system. ? If prompted, enter the "UNIX Group Name" for the oracle user (dba). ? At the "File Locations Screen", verify the Destination listed is your ORACLE_HOME directory. Also enter a NAME to identify this ORACLE_HOME. The NAME can be anything, but is typically "DataServer" and the first three digits of the version. For example: "DataServer920" ? At the "Available Products Screen", choose Oracle9i Database, then click Next. ? At the "Installation Types Screen", choose Enterprise Edition, then click Next. ? If prompted, click Next at the "Component Locations Screen" to accept the default directories. ? At the "Database Configuration Screen", choose the the configuration based on how you plan to use the database, then click Next. ? If prompted, click Next at the "Privileged Operating System Groups Screen" to accept the default values (your current OS primary group). ? If prompted, enter the Global Database Name in the format "ORACLE_SID.hostname" at the "Database Identification Screen". For example: "TEST.LNXhost". The SID entry should be filled in with the value of ORACLE_SID. Click Next. ? If prompted, enter the directory where you would like to put datafiles at the "Database File Location Screen". Click Next. ? If prompted, select "Use the default character set" (WE8ISO8859P1) at the "Database Character Set Screen". Click Next. ? At the "Summary Screen", review your choices, then click Install. The install will begin. Follow instructions regarding running "root.sh" and any other prompts. When completed, the install will have created a default database, configured a Listener, and started both for you. Note: If you are having problems changing CD-ROMs when prompted to do so, please review the following article: Note:146566.1 How to Unmount / Eject First Cdrom Your Oracle9i Release 2 (9.2.0) RDBMS installation is now complete and ready for use. Appendix A ========== Documentation is available from the following resources: Oracle9i Release 2 (9.2.0) CD-ROM Disk1 ---------------------------------------- Mount the CD-ROM, then use a web browser to open the file "index.htm" located at the top level directory of the CD-ROM. Then proceed to Documentation menu Item on this CD-ROM you will find the Installation Guide, Administrator's Reference, and other useful documentation. Oracle Documentation Center --------------------------- Point your web browser to the following URL: http://otn.oracle.com/documentation/content.html Select the highest version CD-pack displayed to ensure you get the most up-to-date information.
    Regards,
    Ladislav Jurencak

  • ORA-04030: out of process memory (PLS non-lib hp,pdz2M87_Allocate_Permanent

    i am trying to validate a package body and getting the following error while doing that .
    Any sollution for this
    ORA-04030: out of process memory (PLS non-lib hp,pdz2M87_Allocate_Permanent

    Hi Shakil,
    Error: ORA 4030
    Text: out of process memory when trying to allocate %s bytes (%s,%s)
    Cause: Operating system process private memory has been exhausted
    Action: See the database administrator or operating system administrator to
    increase process memory quota. There may be a bug in the application
    that causes excessive allocations of process memory space.
    *** Important: The notes below are for experienced users - See Note:22080.1
    Explanation:
    The Oracle shadow process cannot allocate memory. The error
    should show the number of bytes being requested and area where
    they are required
    Diagnosis:
    1) Check for a subsequent error, Eg: ORA 7324, to see where
    memory is being allocated.
    2) Check user memory limits and swap space. If these are too
    low you may get the above error.
         Eg: 'limit' or 'ulimit -a' on Unix.
    3) It may help to reduce <Parameter:SORT_AREA_SIZE> if this is large.
    4) Check if using the Parallel Query Option - if an operation is
    being performed in parallel the memory requirements are greater.
    Best regards,
    Rafi.
    http://rafioracledba.blogspot.com/

  • ISE 1.2 rejects RADIUS messages from vWLC

    Hello,
    I have an ISE appliance with the Wireless license. The Cisco vWLC is configured to send Radius traffic to the device, but is getting the error message:
    11054 Request from a non-wireless device was  dropped due to installed Wireless license
    The vWLC is showing up under endpoints as a VMWARE workstation, and not a WLC, and so under the licensing requirements will not allow RADIUS to be received from anything other than a WLC. I tried hard-coding the policy to match a Cisco WLC with a condition of matching its MAC address, and even disabled the VMWARE profile policy, but the endpoint then only matches the "Unknown" policy. Any ideas?

    Check the Cisco ISE dashboard (
    Operations > Authentications
    ) for any indication
    regarding the nature of RADIUS communication loss. (Look for instances of your
    specified RADIUS usernames and scan the sy
    stem messages that are associated with
    any error message entries.)
    Log into the Cisco ISE CLI
    2
    and enter the following command to produce RADIUS
    attribute output that may aid in debugging connection issues:
    test aaa group radius
    new-code
    If this test command is successful, you should see the following attributes:
    Connect port
    Connect NAD IP address
    Connect Policy Service ISE node IP address
    Correct server key
    Recognized username or password
    Connectivity between the NAD and Policy Service ISE node
    You can also use this command to help narrow the focus of the potential problem
    with RADIUS communication by deliberatel
    y specifying incorrect parameter values
    in the command line and then returning to the administrator dashboard (
    Operations
    > Authentications
    ) to view the type and frequency
    of error message entries that
    result from the incorrect command line. For example, to test whether or not user
    credentials may be the source
    of the problem, enter a username and or password that
    you
    know
    is incorrect, and then go look for error message entries that are pertinent
    to that username in the
    Operations > Authentications
    page to see what Cisco ISE
    is reporting.)
    Note
    This command does not validate whether or not the NAD is configured to use
    RADIUS, nor does it verify whether th
    e NAD is configured to use the new
    AAA model.

  • Seeking library with industrial HMI drawings

     
    Hello,
    I am Developing a nice HMI that communicates with PLC;s an d DCS's automation and control systems using visual studio 2008 and NModbus.dll lilbrary. The only thing I am still missing are the libraries for the HMI drawings,
    What I am looking for is for the typical HMI drawings like industrial tanks showing the level of the liquid contained ther, the drawing of a motor in motion or the typical bar indicating temperature or singnaling the value of a pressure signal.
    I know there are some free open source libraries that can be used by visual studio 2008 so I would higly appreciate if somebody suggest me a good open source library with HMI drawings.
    Thanks a lot
    Fausto
    Subject:
    Font Name
    Real font size
    Design
    HTML
    Preview
    Post Options
    This option will split a single thread into a new thread at the specified post. Please include a subject for the new thread, a reason for the split and choose the forum where the new thread should be created. Note: any posts split will lose Proposed Answer or Answered state.
    This option will merge the currently selected thread into a target thread. Note: Answers and Proposed Answers will be removed after moving and this action cannot be undone. Please enter the thread ID to merge to. The thread ID is the portion of the URL after /thread/ which looks something like this: 8138b571-18b6-475a-85d0-63423e506875.
    This option allows the user to change the thread type. Note: changing the thread type will remove any Answers or Proposed Answers from question threads.
    Use the icon to add code.
    Has Code
    Create Thread In:
    .NET Base Class Library
    .NET Framework Networking and Communication
    .NET Framework Setup
    .NET Remoting and Runtime Serialization
    .NET Services - Technical Discussions
    .NET Services and SQL Data Services - On-boarding Issues
    64-Bit .NET Framework Development.
    ASMX Web Services and XML Serialization
    Bug Reporting for Forums Platform (not product support)
    Building Development and Diagnostic Tools for .Net
    Chart Controls for .NET Framework
    Charts & Reports in the Visual Studio 2010 and .NET Framework 4.0 CTP
    Claims based access platform (CBA), code-named Geneva
    Commerce Server 2002 and Earlier
    Commerce Server 2007
    Common Language Runtime
    Connected Services Framework
    Core Coding Experience in Visual Basic and Visual C# in the Visual Studio 2010 and .NET Framework 4.0 CTP
    Core Coding Experience in Visual C++ in the Visual Studio 2010 and .NET Framework 4.0 CTP
    Crystal Reports for Visual Studio
    Developer Documentation and Help System
    Developing Applications with Power Management
    Development with the Windows Sensor and Location Platform
    Documentation on Standards
    File Services
    General Troubleshooting & Support for the Visual Studio 2010 and .NET Framework 4.0 CTP
    Getting Started With Visual Studio Team System
    HealthVault Data Types
    Ink, Multi-Touch, and Other Tablet PC Development
    JScript for the .NET Framework
    Live Framework
    Managed Extensibility Framework
    MDM Business Rules and Workflow
    MDM Data Quality and Profiling
    MDM Entity and Hierarchy Management
    MDM General Discussions
    MDM Integration
    MDM Setup, Configuration and Security
    Microsoft Accessibility Labs
    Microsoft adCenter: Development
    Microsoft Atlas APIs: Development
    Microsoft Codename "Dublin"
    Microsoft Codename "Oslo"
    Microsoft ESP Platform Development
    Microsoft Office Communications Server 2007 SDK
    Microsoft Office Communicator 2007 SDK
    Microsoft Security Development Lifecycle (SDL) - Threat Modeling
    Microsoft Unified Communications AJAX SDK
    Microsoft Unified Communications Client SDK
    Microsoft Unified Communications Managed API SDK
    MSBuild
    MS-Build, Multi-Targeting and WiX in the Visual Studio 2010 and .NET Framework 4.0 CTP
    MSDN and TechNet Search Feedback
    MSDN Online: Future Plans
    MSDN Sandbox
    MSDN Site Feedback
    Network Class Library (System.Net)
    Office Binary File Formats
    Office Development with Visual Studio 2010 CTP
    Office Live Basics, Essentials and Premium
    Office Live Small Business - Business Applications
    Office Live Small Business - General Topics
    Office Live Small Business - Web Site
    Off-Topic Posts (Do Not Post Here)
    Open XML Format SDK
    Parallel Computing in C++ and Native Code
    Parallel Extensions to the .NET Framework
    Pex
    Phoenix
    Ramp Up
    Reference Source Server Discussion
    Regular Expressions
    Server Core Developers
    SharePoint - Accessibility
    SharePoint - Business Data Catalog
    SharePoint - Business Intelligence
    SharePoint - Collaboration
    SharePoint - Community Advancement
    SharePoint - Design and Customization
    SharePoint - Development and Programming
    SharePoint - Enterprise Content Management
    SharePoint - Excel Services
    SharePoint - General Question and Answers and Discussion
    SharePoint - InfoPath Forms Services
    SharePoint - Search
    SharePoint - Setup, Upgrade, Administration and Operation
    SharePoint - Social Computing
    SharePoint - Workflow
    Small Basic
    Small Business Application Development
    Social Bookmarks Discussion Forum
    SQL Data Services (SDS) - Getting Started
    Suggestions and Feedback for the Forums
    Team Foundation Server - Administration
    Team Foundation Server - Build Automation
    Team Foundation Server - General
    Team Foundation Server – Power Tools & Add-ons
    Team Foundation Server - Process Templates
    Team Foundation Server - Reporting & Warehouse
    Team Foundation Server - Setup
    Team Foundation Server - Team System Web Access
    Team Foundation Server - Version Control
    Team Foundation Server - Work Item Tracking
    Team Foundation Server in Visual Studio Team System 2010 CTP - Feedback Forum
    Training and Certification
    Using the Exchange Server Protocols
    Using the Microsoft SQL Server Protocols
    Using the Office Protocols
    Using the Open Specifications
    Using the SharePoint Products and Technologies Protocols
    Virtual Earth: Map Control Development
    Visual Basic General
    Visual Basic IDE
    Visual Basic Interop and Upgrade
    Visual Basic Language
    Visual Basic Power Packs
    Visual C# General
    Visual C# IDE
    Visual C# Language
    Visual C++ General
    Visual C++ Language
    Visual Studio Class Designer
    Visual Studio Code Analysis and Code Metrics
    Visual Studio Debugger
    Visual Studio Editor in the Visual Studio 2010 and .NET Framework 4.0 CTP
    Visual Studio Extensibility
    Visual Studio Guidance Automation Toolkit
    Visual Studio Performance Tools (Profiler)
    Visual Studio Report Controls
    Visual Studio Setup and Installation
    Visual Studio Source Control and SourceSafe
    Visual Studio Team System - Architecture & Design
    Visual Studio Team System - Database Edition
    Visual Studio Team System - Microsoft Solutions Framework (MSF)
    Visual Studio Team System - Testing
    Visual Studio Team System - Web and Load Testing
    Visual Studio Team System Code Name "Rosario"
    Visual Studio Tools for Office
    Visual Studio WPF Designer
    Web Development in Visual Studio in the Visual Studio 2010 and .NET Framework 4.0 CTP
    Web Sandbox - Exploits
    Web Sandbox - General
    Where is the Forum For…?
    Windows Azure
    Windows Communication Foundation
    Windows Live  Spaces: Development
    Windows Live Agents Development
    Windows Live Alerts Development Forum
    Windows Live Controls Development
    Windows Live Data Development
    Windows Live General: Development
    Windows Live ID: Development
    Windows Live Messenger Client: Development
    Windows Live Messenger Web APIs: Development
    Windows Live Search: Development
    Windows Live Writer: Development
    Windows Performance Toolkit
    Windows Presentation Foundation (WPF)
    Windows Protocols
    Windows Web Services API
    Working with Data and XML in the Visual Studio 2010 and .NET Framework 4.0 CTP
    Working with Data in WPF Applications in the Visual Studio 2010 and .NET Framework 4.0 CTP
    Thread Type:
    General Discussion
    Question
    Tags:
    Sticky Until
    Subscribe to Alerts for this thread.
    Alert Me
    Merge to Thread ID:
    Reason:
    Display Name:
    Submit
    Cancel
    Subject must be 1 to 255 characters long.
    A reason is required between 4 and 255 characters.
    Body must be 4 to 60000 characters long.
    Please select a forum for your thread.
    The tag contains illegal characters.
    Sticky Date must be greater than current date.
    Sticky Date format is invalid.
    Invalid Thread ID
    Required Field: Display Name must be between 2 and 32 characters
    Invalid User: The user entered cannot be found or is not a Microsoft Employee
    Related Messages
    faustojc

    Hello,
    This should have been asked in the
    Windows Presentation Foundation (WPF) forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog:http://unlockpowershell.wordpress.com
    My Book:Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Some help required

    HELLO,
       1. WHAT IS OSS.
       2. EXPLAIN THE CONCEPT OF CTS.
    REGARDS
    BALEEQ

    Hi Baleeq,
    <u><b>
    CTS</b></u>
    The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems in your system landscape
    The Change and Transport System offers you the following roles:
    - Transport Administrator
    - Transport Operator
    Also go through these links to know more about the same..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/dfba3692dc635ce10000009b38f839/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/57/9a9838e914a20de10000009b38f8cf/content.htm
    <u>
    <b>OSS</b></u>
    If you meant "What is SAP OSS connection service?"
    The answer is,It is a secure network connection that connect SAP's customer network to SAP support network in Germany to use "R/3 Online Services" over the Internet.
    Go through this link to know more about the same..
    http://www.csloxinfo.com/corporateaccess/saposs_en.asp
    But if you wanna know what you mean by OSS Notes
    Then the answer is, SAP will not support customer modified objects. Having said that, often it is necessary to make such changes to make the system behave as required by the business. The only supported changes are those made when applying OSS notes.
    Also go through these links to know more about the same...
    http://www.sappoint.com/ossnotes.html
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/user/view/cs_msg/6632
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/user/view/cs_msg/6539
    I hope it helps...
    Regards,
    Abhy
    PN: Reward the helpful...
    Message was edited by: Abhy Thomas

  • Error occurred while publishing the content item to the Knowledge Directory

    We are receiving the following error upon publishing non-binary content items to the knowledge directory:
    Error occurred while publishing the content item to the Knowledge Directory. Contact your portal administrator.
    Ironically, in the KD, we call see all content items located in Publisher when we are in Edit mode -- even though they haven't been published to the KD yet. In Browse mode, we can't see any content items.
    Has anyone see this error before? What could be the cause?
    We are using ALUI 6.1.

    Hi,
    If you are seeing the documents in the Knowledge Directory and in edit mode, but not browse mode then check/try the following. What exactly were you doing when you got the error? Were you in Publisher or in the Knowledge Directory and running the Simple Submit task?:
    1. Try to approve the documents in edit mode.
    2. Go to the Administrative->Intrinsic Operations and run the following jobs.
    --> Search Update 1
    3. Make sure you have proper permissions on the folder in the Knowledge Directory and Publisher Folders.
    4. Check the permissions on the Content Source for the Knowledge Directory
    I need a little more information to get your better help.
    tnx
    James

Maybe you are looking for