Administrator Access ACS V4.2

I have just reimaged one of my ACS appliances as it was completely corrupted.
Now I have done this I have connected it to the network via DHCP so I can patch it from v4.2 to the latest version.
The machines is now on the same VLAN as my workstation. When I try to login I get the message
"This machine cannot be used for administration"
The box is a vanilla install with only the passwords set on the machine - my workstation has its local firewall turned off and is not using a proxy server.
Any suggestions - as I can't log into the gui I can't change any settings there?
Thanks
Giles

Pablo,
He is running acs for appliance and not acs for windows so access to the box isnt possible.
Giles what version browser are you using? If you are using IE8 you may want to install Mozilla as IE8 isnt supported. If you arent using IE8 you may want to check which version of java you are also using.
Hope this does the trick,
Tarik

Similar Messages

Administrative access to AP1200 via TACACS+ authentication

Can anyone tell me if it is possible to set up authenticate admin access to an AP1200 running the 12.00T code.
I'm using ACS ver 3.1
All other devices (routers switches, VPN 3000, etc..) all authenticate properly.
Thanx

You can authenticate the admin access to AP1200 using RADIUS protocol but not using TACACS.. TACACS option is reserved for future enhancements..
Using RADIUS, You need to use cisco AV-Pair attribute for admin users with following syntex
aironet:admin-capability=write+ident+admin+firmware
Here is the procedure for the admin user you to define the Cisco AV pair Attributes .
a) On acs select the interface configuration and go to the advance option ,
selct "per-user Tacacs/ radius attribute " click on submit .
b)On ACS , Select network configuration ,
1) check if you have configuration >> Radio ( IOS /PIX available ) on the ACS
if not add NAS type Radius IOS/PIX , note that this needed for IOS / PIX attribute
2) After adding IOS/PIX device , select interface configuration >>Radius ( IOS / PIX )
Enable [026/009/001] "cisco av-pair" option , again make sure that you enable
at user and group level click on submit
3) Add a user ( User setup >> ADD/EDIT ) to restrict administrator access control
1) enable and configure cisco 09\001 cisco av-pair using
aironet:admin-capability=write+ident+admin+firmware

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

Looking for some best practice regarding Content Administrator access

Hi. I am looking for some best practice or rule of thumb from SAP or from different companies how they address Portal Content Administrator access in Production environment. Basically, our company is implementing portal to work with SAP BW. We are on SP 9. Basically, I am trying to determine if we should have 1-2 Portal Content Administrator in Production with 24/7 access or we should limit them from NOT having this. Can you share with me some ideas of what is right? and what is not?
Should we have access in Production? Or Should we have this access but limited? By the way, our users are allow to Publish BI reports/queries into Production.

Hello Michael,
Refer to this guide about managing initial content in portal.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bfbf7c-7aa1-2910-6b9e-94f4b1d320e1
Regards
Deb
[Reward Points for helpful answers]

I-Cal: I need to grant administrative access to my assistant...

I need to grant administrative access to my assistant so that she can make scheduling edits to my i-Cal. I still need to have full administrative access to the calendar as well. How does one grant dual access?

Try booting into safe mode.
http://support.apple.com/kb/HT1564

Severity: 3 Administrative access denied, and lost wireless connection

What does that mean? I am currently watching my Logs file update every other second with a new line that looks like someone is trying to access my Airport.
The date is wrong too, says Dec. 31 when it's May 31. Line is as follows:
Dec 31 19:03:15 Severity:3 Administrative access denied to fe80::21e:c2ff:fec0:4f0d%mirror0/49925.
The original reason why I was looking at the Log was because I got bounced off my Airport again. It happens now and then, when there are a bunch of wireless connections in the building, I can see them listed, but when it happens, my own Airport is missing from the list.
The other issue is that I am not interested in paying for someone else's internet access. I have it password protected, but the person I *think might be trying to hack it, is a computer genius/programmer who's built systems, so I'm a bit worried because I don't know anything about this stuff.
Is there any way I can make sure I'm not bounced off my connection again, and that noone else gets to use my connection?
Thanks!

As long as you're passwords are strong, I wouldn't worry about it. There is always someone somewhere trying to gain access to a router, to get internet access or what have you.
More then likely if someone did try and access your routers, and got denied, they just moved on to the next router he could find and try to access that one.
Just make sure you're passwords are strong enough.
If you're concerned that your password isn't strong enough, or to common, check out this website.
https://www.grc.com/passwords.htm
Hope that helps,
AL

How can i add an administrator access so the admin can edit his webpage on the web browser?

How can i add an administrator access so the admin can edit his webpage on the web browser?

A content management system or CMS is software usually on the server that allows client's to log-in and edit content from any web browser with an internet connection. These web pages are typically built with server-side programming (PHP) and databases (MySql).
CMSs come big and small. The right one for your project depends on
     a) your programming skills,
     b) project requirements,
     c) budget.
COMMERCIAL CMSs:
Cushy CMS (watch the video to see how it works)
No PHP or databases required. Editing is performed on their web site.
http://www.cushycms.com
Perch ($59 license per site)
PHP & MySql required
http://grabaperch.com/
WebAssist Power CMS Builder - Extension for DW
PHP & MySql required
http://www.webassist.com/dreamweaver-extensions/powercms-builder/
Adobe Business Catalyst (full subscription includes CMS & web hosting)
http://www.businesscatalyst.com/
OPEN SOURCE CMSs:
Get Simple CMS
PHP & XML required.
http://get-simple.info/
e107 CMS
PHP & MySql required
http://e107.org/
WordPress
PHP & MySql required
http://wordpress.org
Joomla!
PHP & MySql required
http://joomla.com
Drupal
PHP & MySql required
http://drupal.com
Concrete 5
PHP & MySql required
http://www.concrete5.org/
Nancy O.

Log - Administrative access denied....

I'm seeing numerous "Administrative access denied to xxxx::xx:xx:xx....." statements in my log.
Do I have a problem?

NO.
When you first try to access you Airport using the Airport utility. It will check for a password. It will deny access until the correct password is entered.
If you look at the line after "denied" in the log, you'll see access granted (after the password has been entered) to the machine you are accessing from.

Administrator access required to use a new printer?

Hello.
Does connecting a new printer connection require administrator access in Mac OS X (e.g., 10.5.8)? I gave a client an non-administrator account so he cannot change settings and stuff for security reasons.
Thank you in advance.

Kappy wrote:
They can use a printer, but they cannot make changes to Print & Scan preferences nor install a new printer. That would require the admin user. Unless, of course, you've banned them from even using a printer.
Yeah, but I don't want to ban the user from everything. Hmm, I wonder if it is possible to allow printers only.

Mac wakes up for Ethernet network administrator access, goes to sleep again

I'm running Mac OS X 10.4.6 on an iMac G5, and the OS is set up such that it presents a login prompt after the Mac is witched on from standby mode. If one does not start to type in a password, the machine goes back into standby mode after a dozen seconds or so, which is helpful e.g. in case I have hit the keyboard by accident.
However, there are situations when I don't want this to happen. For instance, I own a SqueezeBox v5 device, which will wake also the Mac when I turn it on via its remote control (I assume via "Wake for Ethernet network administrator access"). However, since I do type on the Mac keyboard in this case, but use the Squeezebox remote control instead, the Mac decides to turn itself off again. I'm also facing this with utilities that try to wake up my Mac at a certain time to perform their functions (e.g. with Audio Hijack Pro).
So my question is, is there any way to tell Mac OS X not to fall back into standby mode when woken up by another mechanism than normal keyboard typing, via some configuration file or similar. Turning off the keyword prompt entirely is not a tolerable option for me in this case.
Thanks for any help on this,
Christian
iMac G5 Mac OS X (10.4.6)
Mac OS X (10.4.3)

The 'wake for ethernet network administrator access' does not mean 'wake on any old ethernet traffic you like'.
In other words you can't just try to hit any service you choose - if the machine is asleep then it doesn't even have an IP address that's going to listen to your hit.
How it works is via a special broadcast protocol sent from another machine on the LAN. The packet is sent to the machine's hardware MAC address (and therefore doesn't need any services to be running on the machine). When the hardware detects the packet it wakes up the machine.
There are a few utilities that will send the relevant packets to wake a machine. Apple Remote Desktop has it, but so do free utilities like WakeOnLAN.

Administrator access is broken! Help please?

at some (very much unknown) point, I have apparently broken my core administrator access to ColdFusion MX7. We are in the process of upgrading to Coldfusion 8, and as I went to review some information in the older system, I have found that I no longer have access to the Core site. I'm running the Enterprise edition in a Multi-Server configuration on Solaris.
I have absolutely no idea what is wrong and obviously no clue as to how it may have been broken. I used it several weeks ago, it worked fine. Now when I attempt to access the site via http://myhost.mydomain.name/CFIDE/administrator , I get a coldfusion error page that states "unexpected error #360 32"
That is meaningless to me, but hopefully someone out here has seen this and can send me some advice as to "how" to get this repaired and get back into operation.
Thanks to any and all help,
Howard

Hmmm....
This is not my Coldfusion admin pages for the servers - this is THE coldfusion administrator for the entire jrun system (and all hosts within coldfusion)...that's the puppy that's "down" or unavailable. I looked and see no evidence of a "cfclasses" folder in that part of my installation. I just followed the directions was I did the initial installation, selected an external web server for the install, and on completion, I copied the CFIDE and cfdocs folders into that external web server's root directory. Looking through my backups, I don't see any evidence of a cfclasses folder ever having been in the root area.
Thanks

Administrator access only

I am going to be taking my Mac Pro to an Apple authorize repair dealer. I have files on my hard drive that I want to keep private so I have file vault turned on. I have two users configured on my Mac. One is the administrator that has full access to my computer. The second user that does not have administrator access (can't have access to my files). When I drop my Mac off at the Mac dealer to have a new battery installed, install more ram memory, diagnose why my computer is not starting properly when I push the start up button on computer, and find out why my computer is not awaking from sleep. Will the technician be able to do these proceeders logged on as an user of my computer, who does not have administrator access to my computer?

They might need admin access. If you do a backup of your computer, turn File Vault off, and remove the files, the techs will be able to work much easier.

Administrator Access

I am attemting to add additonal iTunes U administrators however I cannot find any way to do this. The manual states the following "Click Edit Apple ID Administrator Access in the Tools area". However, when I log into the admin site I have no "Apple ID Administrator Access" in my tools area.
Am I missing a step/not understanding the instrcutions?

Sorry, for the delay. Is this still an issue?

No Administrator Access

I am the administrator of my machine and have my user + one more created, however for some reason I do not have administrator access. The secondary user does not have administrator access either.
When I log into the System Preferences / Accounts, the "Allow user to administer this computer" option is not available. The padlock shows as locked and when I select it a pop-up appears asking for the name and password of the administrator. I know that the password is correct and have tried entering multiple combinations of the user name but nothing works
iBook G4 Mac OS X (10.4.4)

only managed to get the 'Invalid Path' message even when trying the alternative commandIt isn't an alternative.
So, the first nicl command gives you "Invalid Path"? That usually means there is no "groups" category, or "admin" group, in the NetInfo database. The purpose of the 2nd and 3rd nicl commands is to create that entry, so that you then repeat the first command. What did it say to the 2nd and 3rd commands?
If it really messed up, we may need to start you up again with a default NetInfo database. Don't worry, it's not too difficult. But first, run the following commands using Terminal, not in Single User, and copy/paste the output here.
Open the Terminal (from /Applications/Utilities) and copy and paste the following into the Terminal window, one line at a time, with a return after each line:
nireport . /users uid gid name realname home | awk '$1>500 {print $0}'
nireport . /groups name gid users | egrep "admin|staff"
ls -ln /UsersThis will allow me to help you get your NetInfo database back in shape.

Help - Administrator Access

I have recently tried to update my MacBook and have been unable to as I seem to have lost administrator access!!
I have tried a number of times and keep on getting locked out. Is there anyway you can 'start again' and reset administrator user name and password - I have all original discs etc. The problems seems to have happened since I installed Leopard.
Any help gratefully received!!

Thank you for the link to the article - I managed to get to the reset password link, however every time I clicked on it it partly opened and then defaulted back to the original problem stating there was a problem.
Do you have any other ideas please?

Administrator Access ACS V4.2

Similar Messages

Maybe you are looking for