Administrator (Configuration Wizard)??
Hello all,
I was doing the BI configuration wizard step and came to an error in the task. This error came with a link, that I assume went to some configuration portion that was concerned with whatever that step was trying to do. After clicking on the link a new browser popped up and asked me to logon as "Administrator (Configuration Wizard)".
I tried the only user that I have set up on the system right now, which is the Administrator, and it failed and immediately and locked my Adminstrator user, which I then had to unlock by using the emergency user :S
(I found it strange that my Administrator user isn't the user that it wants, but it's locking that user for failed login attempts. Strange...) Anyway, I was wondering if anyone knew what or who this "Administrator (Configuration Wizard)" user actually is?
I ran into the same problem when following the Additional Notes section of note 983156; going to host:port/index.html -->Web Dynpro --> Content Administrator --> Maintain J Co Desitnations asked me to login as the same user.
Anybody have any ideas about this?
Thanks so much!
Hello.
Testing.
1.-
se37
LCR_GET_OWN_BUSINESS_SYSTEM
what error???
2.-
Check the SLD -> Technical System and Business System.
Check the CACHE -> SXI_CACHE; refresh cache of repository, and runtime directory.
Restart Machine.
Similar Messages
-
Error while configuring the database connection in sharepoint configuration wizard.Sharepoint 2007.
System
Provider
[ Name]
SharePoint
Products and Technologies Configuration
Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-11-06T02:03:00.000Z
EventRecordID
11054
Channel
Application
Computer
HZNTPMSWSMOS001.NEO-DIAGEO.com
Security
EventData
Failed
to create the configuration database. An exception of type
System.SystemException was thrown. Additional exception information: The trust
relationship between this workstation and the primary domain failed.
System.SystemException: The trust relationship between this workstation and the
primary domain failed. at
System.Security.Principal.NTAccount.TranslateToSids(IdentityReferenceCollection
sourceAccounts, Boolean& someFailed) at
System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
sourceAccounts, Type targetType, Boolean forceSuccess) at
System.Security.Principal.NTAccount.Translate(Type targetType) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GetMachineRelativeSecurityIdentifier(SPServer
server, Boolean& isMachineAccount) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityAccessToDatabase(SPProcessIdentity
identity, SPDatabase database) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityDatabaseAccess()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update() at
Microsoft.SharePoint.Administration.SPWindowsService.Update() at
Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder
administrationContentDatabase, IdentityType identityType, String farmUser,
SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
IdentityType identityType, String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at
Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()Hi,
This issue seems to be a machine Issue. From message is seems that your Computer is not properly connected to Domain. use the steps in the below link and try doing your steps again.
https://support.microsoft.com/kb/162797?wa=wsignin1.0
Regards -
OutOfMemoryError when running Oracle BPM Enterprise's Configuration Wizard
Hi,
I was trying to configure Oracle BPM Enterprise via Oracle BPM Admin Center. I left most of the settings to their respective default values; only adding in passwords for the Directory, Engine, etc. However an error was encountered when it is trying to deploy the '01-eng-bpmengine' EAR file. A 'OutOfMemoryError: Java heap space' was logged after running the configuration for a while. Below is the full error log:
AdmCenterConsole.log
FuegoLauncher.main()
fix classpath: C:\OraBPMwlHome\bin;C:\OraBPMwlHome\bin\lax.jar;
new classpath: C:\OraBPMwlHome\bin\lax.jar;FuegoLauncher.main() - 2
arg[0] = C:\OraBPMwlHome\bin\obpmadmcenter.properties
StreamLogOutput: No log file specified in property 'fuego.log.admcenter.file'.
Defaulting to System.err.
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\Java\JDK16~1.0_1\jre\bin;C:\Java\JDK16~1.0_1\bin;C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Java\jdk1.6.0_10\bin;C:\apache-ant-1.6.5\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] Your environment has been set.
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar
[<I> 03/03/09 20:54:13]
[<I> 03/03/09 20:54:13] Initializing WebLogic Scripting Tool (WLST) ...
[<I> 03/03/09 20:54:13]
[<I> 03/03/09 20:54:19] Welcome to WebLogic Server Administration Scripting Shell
[<I> 03/03/09 20:54:19]
[<I> 03/03/09 20:54:19] Type help() for help on available commands
[<I> 03/03/09 20:54:19]
[<I> 03/03/09 20:54:19] t3://SN-06-SHENGYUEN:7001
[<I> 03/03/09 20:54:20] Connecting to t3://SN-06-SHENGYUEN:7001 with userid weblogic ...
[<I> 03/03/09 20:54:22] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'oft'.
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Warning: An insecure protocol was used to connect to the
[<I> 03/03/09 20:54:22] server. To ensure on-the-wire security, the SSL port or
[<I> 03/03/09 20:54:22] Admin port should be used instead.
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Location changed to edit tree. This is a writable tree with
[<I> 03/03/09 20:54:22] DomainMBean as the root. To make changes you will need to start
[<I> 03/03/09 20:54:22] an edit session via startEdit().
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] For more help, use help(edit)
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Starting an edit session ...
[<I> 03/03/09 20:54:22] Started edit session, please be sure to save and activate your
[<I> 03/03/09 20:54:22] changes once you are done.
[<I> 03/03/09 20:54:22] creating mbean of type JMSServer ...
[<I> 03/03/09 20:54:22] creating mbean of type JMSSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type SubDeployment ...
[<I> 03/03/09 20:54:22] creating mbean of type Queue ...
[<I> 03/03/09 20:54:22] creating mbean of type Topic ...
[<I> 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[<I> 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[<I> 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSServer
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type SubDeployment
[<I> 03/03/09 20:54:22] setting attributes for mbean type Queue
[<I> 03/03/09 20:54:22] setting attributes for mbean type Topic
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCXAParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] Saving all your changes ...
[<I> 03/03/09 20:54:22] Saved all your changes successfully.
[<I> 03/03/09 20:54:22] Your edit session is not stopped, you can continue your edits.
[<I> 03/03/09 20:54:22] Activating all your changes, this may take a while ...
[<I> 03/03/09 20:54:22] The edit lock associated with this edit session is released
[<I> 03/03/09 20:54:22] once the activation is completed.
[<I> 03/03/09 20:54:23] Activation completed
[<I> 03/03/09 20:54:23] Creating a user ...
[<I> 03/03/09 20:54:23]
[<I> 03/03/09 20:54:23] User already exist
[<I> 03/03/09 20:54:23] Deploying application from C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets AdminServer (upload=true) ...
[<I> 03/03/09 20:54:23] <Mar 3, 2009 8:54:23 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear], to AdminServer .>
[<I> 03/03/09 20:54:27] .Completed the deployment of Application with status completed
[<I> 03/03/09 20:54:27] Current Status of your Deployment:
[<I> 03/03/09 20:54:27] Deployment command type: deploy
[<I> 03/03/09 20:54:27] Deployment State : completed
[<I> 03/03/09 20:54:27] Deployment Message : no message
[<I> 03/03/09 20:54:27] Deploying application from C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear to targets AdminServer (upload=true) ...
[<I> 03/03/09 20:54:27] <Mar 3, 2009 8:54:27 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear], to AdminServer .>
[<I> 03/03/09 20:54:43] Failed to deploy the application with status failed
[<I> 03/03/09 20:54:43] Current Status of your Deployment:
[<I> 03/03/09 20:54:43] Deployment command type: deploy
[<I> 03/03/09 20:54:43] Deployment State : failed
[<I> 03/03/09 20:54:43] Deployment Message : java.lang.OutOfMemoryError: Java heap space
[<I> 03/03/09 20:54:43] weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[<I> 03/03/09 20:54:43] No stack trace available.
[<I> 03/03/09 20:54:43] This Exception occurred at Tue Mar 03 20:54:43 SGT 2009.
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[<I> 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[<I> 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[<I> 03/03/09 20:54:43] at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
[<I> 03/03/09 20:54:43] at org.python.core.PyMethod.__call__(PyMethod.java:96)
[<I> 03/03/09 20:54:43] at org.python.core.PyObject.__call__(PyObject.java:248)
[<I> 03/03/09 20:54:43] at org.python.core.PyObject.invoke(PyObject.java:2016)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx17.deploy$8(<iostream>:223)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx17.call_function(<iostream>)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:404)
[<I> 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:184)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:623)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:256)
[<I> 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:169)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.f$0(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:738)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyCode.call(PyCode.java:14)
[<I> 03/03/09 20:54:43] at org.python.core.Py.runCode(Py.java:1135)
[<I> 03/03/09 20:54:43] at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43] Exiting WebLogic Scripting Tool.
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLST.main(WLST.java:129)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[<I> 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[<I> 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[<I> 03/03/09 20:54:43] at weblogic.WLST.main(WLST.java:29)
[<I> 03/03/09 20:54:43] <Mar 3, 2009 8:54:43 PM SGT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
Is there any way that I can increase the heap size of the Configuration Wizard? If not, is there any solution to this problem?Hi,
It seems to be a Weblogic OOM (OutOfMemory).
Why don't you try increasing the weblogic memory (you have to modify your domain scripts)
I guess that after increasing your WLS domain memory settings you will be able to configure it using the config wizard.
Hope this helps,
Ariel -
Office 2013 license pack does not allow me to activate key within configuration wizard
Hello,
I have a KMS host running Office 2010 activations for our client computers which is running fine. I installed the Office 2013 license pack on the same host. However, in the configuration wizard it doesn't allow me to activate the product key. Is there
a way around this?
My client laptop isn't activating against the KMS host, and I have Office 2013 installed on my laptop. This is what I get when I run
cscript ospp.vbs /act on my client laptop
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd c:\
c:\>cd program files
c:\Program Files>cd microsoft office
c:\Program Files\Microsoft Office>cd office 15
The system cannot find the path specified.
c:\Program Files\Microsoft Office>cd office15
c:\Program Files\Microsoft Office\Office15>ospp.vbs /act
c:\Program Files\Microsoft Office\Office15>cscript ospp.vbs /act
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
Installed product key detected - attempting to activate the following product:
SKU ID: b13afb38-cd79-4ae5-9f7f-eed058d750ca
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
Last 5 characters of installed product key: 92CD4
ERROR CODE: 0xC004F038
ERROR DESCRIPTION: The Software Licensing Service reported that the product coul
d not be activated. The count reported by your Key Management Service (KMS) is i
nsufficient. Please contact your system administrator.
---Exiting-----------------------------
c:\Program Files\Microsoft Office\Office15>Hi,
Please check if your KMS host key for Office 2013 is valid and you can try to activate the KMS host by telephone.
To get the key for the Microsoft Office 2013 KMS, sign in to Microsoft Volume Licensing Service Center.
On this page, don’t choose the Key Management Service Host Key. Choose the Office version you are licensed for instead, and look for the KMS key for that version.
http://technet.microsoft.com/en-us/library/dn385356.aspx
To activate an Office KMS host by telephone
http://technet.microsoft.com/en-us/library/dn385356.aspx#BMK_ToactivateanOfficeKMSbytelephone
KMS activation of Office 2013
http://technet.microsoft.com/en-us/library/ee624357.aspx
If issue persists, it is recommended to post the question in Office forums for further troubleshooting.
http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro&filter=alltypes&sort=lastpostdesc
Hope this helps.
Jeremy Wu
TechNet Community Support -
Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm
Hi All,
I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
Failed to create the configuration database.
An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information: The given key was not present in the dictionary.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
Any ideas why this is happening?Hello together,
I get the same error mentioned above while running the configuration wizard.
My Serverenvironment:
- MS Server 2008 R2 Enterprise
- Virtual Machine (Host Machine also R2 Enterprise)
- SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
- Prerequisites installed without error (and current versions)
Error information:
"Failed to create the configuration database"
"An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
The given key was not present in the dictionary"
The logfile has the following entry:
7/2009 10:52:48 9 ERR Task configdb has failed with an unknown exception
12/07/2009 10:52:48 9 ERR Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Any suggestions?
Thanks
Christoph -
Hi Friends,
I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
in Central administration like adding new WSP, Updating WSP , I get same error.
Does any one have any Idea?
Regards
Gireesh PainulyPosted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl -
SharePoint 2013 Configuration Wizard failure while joining a WFE to the existing server farm.
Dears,
I've been troubleshooting an issue while trying to join a new WFE server to an existing SharePoint 2013 farm.
Issue Description:
When we run the wizard it runs for almost 30 to 45 minutes on the step 3 itself and eventually fails at the end with an error message "Failed to connect to the configuration Database..... Value doesn't fall within the expected range"
First I thought this is a connectivity issue with the config DB and monitored the complete operation very closely after checking the permissions and SQL server connection and happened to see that the server was able to connect to the farm and all the web
applications and the related solutions were pushed to the server and apparently the failure of the Wizard at below point: Followed by the error, all web sites and solutions were retracted and a complete roll back happens.
Can someone pls help me here at the earliest as I'm stuck ???
0
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.62 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx75
Unexpected Reached the retry limit for committing IIS configuration changes, the operation must be rerun.
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology eru1
Medium Released mutex 'Global\Microsoft.SharePoint.SPIisProvisioningLock'
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology aj4j4
Unexpected Joining Farm failed. The exception is Value does not fall within the expected range. StackTrace is at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.CommitChanges()
at Microsoft.Web.Administration.Configuration.CommitChanges() at Microsoft.Web.Administration.ConfigurationManager.CommitChanges() at Microsoft.Web.Administration.ServerManager.CommitChanges() at Microsoft.SharePoint.Administration.SPIisServerManager.CommitChanges(ApplyChanges
applyChanges) at Microsoft.SharePoint.Administration.SPIisProvisioningAssistant.ProvisionApplicationPool(String name, SecurityIdentifier sid, String password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisManager.ProvisionApplicationPool(String
name, SecurityIdentifier sid, SecureString password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool.ProvisionLocal(SPIisWebServiceApplicationPoolProvisioningOptions options)
at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.ProvisionApplicationInstance() at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision() at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 88ah
High Unjoining the farm.
BR,
MukeshHi Pradeep, this wasn't due to any permission issue.. I was trying with the farm account which is a local admin group member as well as being a member of IIS_WPG.. on a continues investigation happened to find that the IIS config file was corrupted and which
encountered issues in the creation of app pool.. I had to tweak around some settings with the config file by considering the other WFE as a reference.. this actually fixed the issue..
BR,
Mukesh
Regards Mukesh -
Service Pack 2 Update - Configuration Failed in Step 5:Products Configuration Wizard (Login Failed)
THIS IS FOR THE TEST ENVIRONMENT, THERE IS ONLY ONE SP SERVER/ONE SQL SERVER
The previous admin before me had already installed OWA Sp2/September 2014 CU on this box without Project Server Sp2 being installed along with it. I am now just updating Project Server to Service Pack 2. I downloaded the file from Microsoft, and installed
the files on the box. I now am running the Products Configuration Wizard to complete the update.
note: the config database version is 14.0.7132.5000 (because of the OWA Sp2
and September cumulative update installed, it does not say Service Pack 2 anywhere)
Please see photos to see the error I am getting. I cannot access the central administration anymore, it is giving me a HTTP Error 503. I need to fix this ASAP! I have tried using another account that should have had permissions but still no dice.
04/13/2015 11:23:43 13 ERR Exception: System.Data.SqlClient.SqlException: Cannot open database "SharePoint_AdminContent_9ddeb31a-419b-4852-b9b5-da18ee2fb7ca" requested by the login.
The login failed.
Login failed for user 'domain\user'.
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory
connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection()
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData
monitoringData, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command)
at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.GetVersion(SPDatabase database, Guid id, Version defaultVersion,
SqlSession session, SPDatabaseSequence sequence)
at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.get_SchemaVersion()
at Microsoft.SharePoint.Upgrade.SPSequence.get_IsBackwardsCompatible()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.IsBackwardsCompatible(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_IsBackwardsCompatible()
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility()
at Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request)
at Microsoft.SharePoint.SPWeb.InitializeSPRequest()
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.get_Count()
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.get_HealthRules()
at Microsoft.SharePoint.Administration.Health.SPHealthAnalyzer.RegisterRules(Assembly assembly)
at Microsoft.Office.InfoPath.Server.Util.HealthAnalyzerRegistration.RegisterHealthRules()
at Microsoft.Office.InfoPath.Server.Administration.FormsService.Update()
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInConfigDB(Boolean provisionTheServiceToo, String
serviceRegistryKeyName)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()Build number hasn't changed since I updated to Sp2. It still is 14.0.7132.5000. Is this supposed to be this way?
Previous admin before me had:
Service Pack 2 for Microsoft Office Web Apps (KB2687470) 64-Bit Edition
14.0.7015.1000
Installed
on all languages (arabic, english, french, german, russian, spanish) but we do not use any of them here.
Also, there are several hotfixes like this (not all show in photo, there are more)
Hotfix for Microsoft Project Server 2010 (KB2883006) 64-Bit Edition
14.0.7132.5000
Installed
Please see photos. -
PI 7.1 Configuration Issue - Configuration wizard -StringIndexOutOfBounds
Hi ,
I have installed the PI 7.1 EHP1 and started configuring it . The Configuration wizard step ( NWA-> Scenarios -> Configuration Wizard --> Initial Configuration (dropdown menu) -> NetWeaver Initial Setup ) is failing , I am getting the following error message . Can you please let me know if you have any thoughts on this issue ?
The initial exception that caused the request to fail, was:
java.lang.StringIndexOutOfBoundsException: String index out of range: 10
at java.lang.String.charAt(String.java:571)
at java.util.regex.Matcher.appendReplacement(Matcher.java:704)
at java.util.regex.Matcher.replaceFirst(Matcher.java:848)
at java.lang.String.replaceFirst(String.java:2001)
at com.sap.tc.lm.ctc.metamodel.util.StringUtil.decryptPasswords(StringUtil.java:48)
... 83 more
See full exception chain for details.
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
For further information about the Web Dynpro error page, error analysis and a description of well-known error situations, see SAP note 1113811.hi kris
You can connect to different SLD also. just you need to configure
follow the installation guide for PI7.1
https://websmp105.sap-ag.de/instguidesNWPI71
https://websmp105.sap-ag.de/instguidesnw
regards
sandeep -
OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB
I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfullyWhenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin -
Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1
Windows Server 2012 with latest updates and SharePoint 2013 with latest updates:
I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error:
Error in Configuration Wizard
Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information
located at {0}, fix the problem, and run this configuration wizard again.
Leaving function StringResourceManager.GetResourceString
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_55_49_686_1872915373.log, fix the problem, and run this configuration wizard again.
In event view I see this two errors:
1) First error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135580
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Failed to initiate the upgrade sequence. An exception of type System.MissingMethodException was thrown. Additional exception information: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object,
System.String, Microsoft.SharePoint.Upgrade.SPLog)'. System.MissingMethodException: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object, System.String, Microsoft.SharePoint.Upgrade.SPLog)'. at System.RuntimeTypeHandle.GetTypeByName(String
name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError,
Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) at System.Type.GetType(String typeName) at Microsoft.SharePoint.Utilities.SPTypeSerializer.DeserializeType(String typeName,
Guid classId, Boolean bResolveMissingTypes) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.ResolveObjectAndClassVersions(SPLog log) at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags) at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
2) Second error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
100
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135581
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server
Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_41_9_710_572545016.log, fix the problem, and run this configuration wizard again.
Please advise on next steps.
How can I successfully install SP1?
Thanks,
Alexcould you please share the upgrade log file, so that we understand the error?
did you reboot your server after the installation of SP1?
also try to clear the Config cache on the servers and then try again?
you can run this command on the server its failing
Get-SPProduct -local
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Workflow Manager Configuration Wizard is not working with USER ID
Hello everyone,
I
have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine that is hosting Sharepoint 2013. I attempt to go into the Workflow Manager Configuration. That comes up and asks me if I want to Create
new farm with Default Settings, New Farm with custom settings, or existing farm. I've tried both Default settings AND Custom settings.
When
the configuration wizard comes up, I attempt to fill out the necessary information. It seems to connect to the SQL server without a problem. I only run into an issue when setting the USER ID. The program totally freezes up and force closes.
I
have verified that the USERID is in the correct format and tried multiple different formats. The problem is that the moment I move the cursor from the USERID field to ANY other field, the program force closes. I'm not able to hit submit, I'm not
able to change any other options. The moment USERID is manipulated or the cursor LEAVES the USERID field, the program force closes. It won't even allow me to put in a password before it force closes.
Customer
domain is running in Windows Server 2003 Enterprise Edittion SP2.
Any
ideas?
I have installed also cumulative update to avoid crash but still I am getting force to close workflow wizard. I have used users which are already added in administrator groups.
We are using 3 tier architecture for Sharepoint 2013.
Also we have made Alias of Domain controller. Eg:-Alias is "labs" for domain "xyz.ab.com".
And we are using labs\spadmin and labs\spservice for Workflow Manager Configuration 1.0
Is there any issue with Domain Alias "labs" as Workflow gives error "Specified RunAs account is invalid" or "Force close the application".
I
have copied the errors from event viewer below:
APPLICATION
ERROR
Faulting
application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965,
time stamp: 0x506dcae6
Exception code: 0xe0434352
Fault offset: 0x000000000000bccd
Faulting process id: 0x17f8
Faulting application start time: 0x01cddee198ece72e
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
.NET
Runtime Error
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Thanks
Hansraj RathvaCheck to ensure that the user you're running the wizard as has access to the Users and Computers folders in Active Directory. I had trouble with the "specified RunAs account is invalid" message, and when I granted the AD rights, I was able to proceed.
The issue would be that the user executing the wizard isn't able to query AD to look up the specified user. The RunAs account you're specifying is probably fine. -
What tasks I should select in NWA Configuration Wizard for PI component
Hello,
I'm in the stage of setting up the NetWeaver 2004S SR2. I've logged to the Net Weaver Administration console. According to documentation, to properly configure PI component I should execute Configuration Wizard task. The problem is that documentation is not very specific on what exact tasks I should execute, so I would like to get some advise from the community.
All tasks I can see are:
BI_00_This wizard will execute Postinstall steps of technical configuration of BI-Java Initial
DI_Allinone_This wizard run all post installation steps for DI, CBS, CMS and DTR. Initial
DI_CBS_This wizard run all post installation steps for CBS. Initial
DI_CMS_This wizard run all post installation steps for CMS. Initial
DI_DTR_This wizard run all post installation steps for DTR.
DI_This wizard sets the Oracle Parameters as per CSN note: 848708 Initial
MI_00_This wizard will execute Postinstall steps of technical configuration for the NetWeaver Mobile Infrastructures
MI_01_This wizard will create User and Assign Dedicated roles for the NetWeaver Mobile Infrastructure Initial
MI_02_create JCo Initial
MI_03_create TCP/IP
MI_04_register Connection Initial
MI_05_set profile in ABAP Initial
MI_06_schedule MI Job Initial
NWA_01_This wizard will execute configuration for local SLD Initial
NWA_02_SLD system : Connect SLD to CEN (if CEN present)
NWA_03_Creating a connection to the SLD and Setting required authorizations for SLD (CIM client settings)
NWA_04_Creating a connection to the ABAP stack of CEN and Starting heartbeat monitoring Initial
NWA_05_NWA system : Store access data per each managed Java system (optional) Initial
NWA_06_NWA system : Register each managed ABAP system to SLD Initial
NWA_07_creates Destination for Data Supplier Bridge
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Initial
PI_01_This template checks if the necessary services are started Initial
PI_02_This wizard will test the BAPI call to SWF_XI_BPM_AUTO_CUSTOMIZE Initial
PI_03_This wizard will assign the Application roles Initial
PI_04_This wizard will Maintain_Technical_System
PI_05_This wizard will configure the integration server for sld Initial
PI_06_This wizard will create the necessary Destinations in ABAP Initial
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server Initial
PI_10_This wizard will Register_Queues_NA Initial
PI_11_This template services are started
I guess I need to mandatory execute PI_XX tasks, but what about others - do I need to execute anything else (I need only PI component to be installed and configured)? Not sure if that makes any difference, but this is the very first time I get into the NWA, so no previous configuration tasks were executed from the Configuration Wizard.
My full system configuration: NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005.
Thanks in advance.Hi Maxim,
Please follow this procedure:
1) Using Config tool Modify VM setting as per requirement (OS and H/W Dependent) Refer note 723909 Java VM settings for J2EE 6.40/7.0.
2) To set Environmental Variable refer Note 314530 - Number of RFC/CPIC connections for external clients. These parameter should be taken care while installing templates
Set these:
1) gw/max_conn 2000
2) gw/max_sys 1200
3) gw/max_overflow_size 40000000
4) gw/max_shm_req 200 (this is to adjust the memory allocation)
Profile parameters
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
ITS
CPIC_MAX_CONV 5000(Should be taken care that it should be set for <sid>adm user
3) Installing Template
Go to home page
http://hostname:portnumber/webdynpro/dispatcher/
Click Deploy and change
4) After This Click Configuration tab and then click Install
For the next tab select scenario PI
And configure template and finally install
5) In case you face any problem while importing please read these notes for altering parameters
Note 314530 - Number of RFC/CPIC connections for external clients
Note 923359 - Collective Note: Configuration Wizard - Template Installer
Hope it will Help you at this stage at development stage
You need to import SAP BASIS Software Component Version into Integration Repository based on your SP Level & XI or PI.
You need to download it from [service market place.|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ]
Regards,
Gagan Deep Kaushal -
Errors in few of the step while running configuration wizard for PI 7.0
hi all,
i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
now in this i got error in few steps:
STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
the error was: CIM_ERR_FAILED: Object manager is not activated
PI_05_This wizard will configure the integration server for sld.
The error was:
Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
PI_09_This wizard will configure Role of Integration server
Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
What should i do?
Regards,
Priyanshu SrivastavaHi Priyanshu,
"Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
Regards,
Blanca -
How to launch configuration wizard in unix
I have installed Oracle BPM Enterprise for Weblogic on a headless unix machine. I installed from a Text console as instructed in the Installation guide. However, there is no documentation on what to do next - the configuration guide does not address how to run the configuration wizard or the process administrator in this mode. Help!
Hello
Well i don't have it installed on windows
But the path must be similar
You may found the configuration wizard in: <OraBPMwlHome>/bin/obpmconfwizard (to launch the configuration wizard)
and
OraBPMwlHome>/bin/obpmadcenter to launch BPM Admin Center.
Hope this helps
Anyway, you can always use scripts ant to configure and deploy your bpm enterprise
Maybe you are looking for
-
I keep getting a "not delivered" message when I try to send a picture through imessage
Over the last week each time I sent a picture in iMessage it goes out then I get a "Not Delivered" message. The other person gets the picture even though it says not delivered. I've shut iMessage off then back on, I've done a hard shutdown/restart.
-
Overheating Battery sucks Apps suck Phone freezes Phone cuts off Wall charger doesnt work Not good signal ^^ These are all the issues that I deal with this phone!! I HAVE HAD FOUR OF THE SAME PHONES. RIDICULOUS. They all suck the same!! I want to go
-
HT4009 DancePad's iap on sale for $0.99,I wanne buy it,but...something is wrong.
What's wrong???!!! Tell me why!!!~ I can buy other iap&apps except it.
-
Hi all, I copied the standard work flow for PO release staratagy . In my work flow work flow 2 approvers were there. I am using the 20000027 standard rule for agent assignment . Here My problem is Do i copy task 2 times or 1 time is enough. if user r
-
Dears, In PI 7.1 we are getting one error: We are getting an u201CSAPClassNotFoundException:u201D. The reason for this is as I got we need to set the classpath in the PI Server. Please do as below: The following is an example of the CLASSPATH stateme