Administrator Forward Exit or BADI

Hi all,
I need to find an exit or a BADI (or where to plug and implicit enhancement) at the moment the administrator clicks on the Administrator Forward button and selects the new agent.
At that moment I need to trigger a custom code. I need to compare the 2 agents (the old agent and the new agent that is being set up by the Administrator)
Thanks!!!
Matias

Hello Matias,
there's no BADI: you'd have to create in implicit enhancement point at the end of
Function module SWL_WI_DIALOG_FORWARD
inspecting the internal table recipients. If not allowed, raise also exception POPUP_CANCELLED to avoid the forwarding.
You should also enable a check, that your coding is only enabled on...
IF sy-tcode = 'SWIA'.
as this function module may also be called when normally forwarding the workitem. (There're two other references on this function module).
Best wishes,
Florin

Similar Messages

  • User Exit OR Badi for MK01 transaction (used for saving vendor amster data)

    Hi All,
    I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
    For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit  'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
    So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
    Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
    Looking forward to your advise and thanks in advance.
    Best Regards,
    Mamta

    Hi ,
    I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
    so problem is solved now
    Thanks,
    Mamta

  • VA02 (SO) exit or badi after saving SO data - urgent

    Hi experts,
    Please let me know the user exit or BADI after SO data saved and commited, but before all internal tables refreshed.
    Advices will be rewarded.
    Thanks,
    Shaik Bhasha

    Hi,
    Check all these userexits.
                                                                                    Exit Name           Description                                                                               
    SDTRM001            Reschedule schedule lines without a new ATP check              
    V45A0001            Determine alternative materials for product selection          
    V45A0002            Predefine sold-to party in sales document                      
    V45A0003            Collector for customer function modulpool MV45A                
    V45A0004            Copy packing proposal                                          
    V45E0001            Update the purchase order from the sales order                 
    V45E0002            Data transfer in procurement elements (PRreq., assembly)       
    V45L0001            SD component supplier processing (customer enhancements)       
    V45P0001            SD customer function for cross-company code sales              
    V45S0001            Update sales document from configuration                       
    V45S0003            MRP-relevance for incomplete configuration                     
    V45S0004            Effectivity type in sales order                                
    V45W0001            SD Service Management: Forward Contract Data to Item           
    V46H0001            SD Customer functions for resource-related billing             
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan   
    Regards,
    Sonika

  • Custom exit or badi for changing the user fields in operation of process order

    Hi all
        I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
        I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
        I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
        Do you have any solution for this question?
    Thanks

    Do a Implicit Enhancement at the PBO of this subscreen.

  • Need a Exit or BADI  For Changing Validation Class  (PRUEFKL) during  EL28

    need to change the Validation Class Validation Class  (PRUEFKL)  or send it blank in order to remove all valdition during Meter read uplaod  , Can any one suggest a BADI or user exit or anything where in i can change the Validtion class before validation take place at the time of meter read uplaod .  As validtion class we do not pass in EL28 it usually get filled with 001 ans 002 . 
    Thanks in advance . 
    regards
    rajeev

    Thank for the response however my question was , can we change the Validation Class throght code  any exit or BADI  during el28  not  by config as config will be done for every thing as this we need to do only for a paticlular program .
    So in short i m looking for any enhancement point ( Exit /BADI ) which willl trigger during el28 and i will be able to send emply validation class in initial stage to avoide validation .
    Regards
    Rajeev
    Edited by: rajeevkohli on Aug 3, 2011 2:25 PM

  • Exit or Badi to prevent MIGO Goods Receipt on PO with Inbound Delivery

    Hi,
    I am hoping that someone can provide me with some direction on how to prevent the use of MIGO for GR when the PO being received is (or should be) linked to an inbound delivery.
    For purchase orders with a confirmation control key an inbound delivery is to be created and the goods receipt needs to be done from the inbound delivery. This scenario also includes the case of stock transport orders whereby an inbound delivery is created form the outbound delivery. On the other hand for purchase orders without a confirmation control key no inbound delivery is created and the MIGO transaction is to be used to post the goods receipt.
    Since both processes are possible, I would like to prevent people from posting the GR using MIGO if certain conditions pre-exist.
    Can anyone suggest a means to accomplish this goal? Is there an exit or badi in MIGO that you would suggest using?
    Thanks,
    Paul

    Hi,
    The following user eixts and badis available for migo transaction:
    Enhancement/ Business Add-in            Description                                                                               
    Enhancement                                                                               
    MB_CF001                               
    Customer Function Exit in the Case of Updating a Art. Doc.     
    MBCF0011                               
    Read from RESB and RKPF for print list in  MB26                
    MBCF0010                               
    Customer exit: Create reservation BAPI_RESERVATION_CREATE1     
    MBCF0009                              
    Filling the storage location field                             
    MBCF0007                              
    Customer function exit: Updating a reservation                 
    MBCF0006                              
    Customer function for WBS element                              
    MBCF0005                              
    Article document item for goods receipt/issue slip             
    MBCF0002                               
    Customer function exit: Segment text in article doc. item                                                                               
    Business Add-in                                                                               
    MB_RESERVATION_BADI                    
    MB21/MB22: Check and Complete Dialog Data                      
    MB_QUAN_CHECK_BADI                    
    BAdI: Item Data at Time of Quantity Check                      
    MB_PHYSINV_INTERNAL                    
    Connection: Core Inventory and Retail AddOn                    
    MB_MIGO_ITEM_BADI                      
    BAdI in MIGO for Changing Item Data                            
    MB_MIGO_BADI                           
    BAdI in MIGO for External Detail Subscreens                    
    MB_DOC_BADI_INTERNAL                 
      BAdIs when Creating an Article Document (SAP Internal)         
    MB_DOCUMENT_UPDATE                    
    BADI when updating article document: MSEG and MKPF             
    MB_DOCUMENT_BADI                       
    BAdIs when Creating an Article Document                        
    MB_CIN_MM07MFB7_QTY                    
    Proposal of quantity from Excise invoice in GR                 
    MB_CIN_MM07MFB7                        
    BAdI for India Version exit in include MM07MFB7                
    MB_CIN_LMBMBU04                        
    posting of gr                                                  
    MB_CHECK_LINE_BADI                     
    BAdI: Check Line Before Copying to the Blocking Tables         
    ARC_MM_MATBEL_WRITE                   
    Check Add-On-Specific Data for MM_MATBEL                       
    ARC_MM_MATBEL_CHECK                    
    Check Add-On-Specific Criteria for MM_MATBEL     
    If it is helpful rewards points
    Regards
    Pratap.M

  • User Exit or BADI on saving of Sales order cost estimate (CK51N)

    Hi,
    Can any one share with me what are the User Exit or BADI that gets triggered on saving of Sales order cost estimate (CK51N).
    Regards,
    Bijay

    Hi
    Check the link
    Need Enhancement Spot or BADI for transaction ck51n
    Regards
    Sanil

  • F110 - Automatic Payment (User Exit, BTE, BADI)

    I have requirement after generating payment document by F110 automatic payment. I need to send data to other system.
    How to get all payment documents? Can I use a BTE, User Exit or BADI? Kindly help me.

    Hi ,
    You can create a DMEE  or genrate Idoc  to another system .
    If you want to send excel file then you can create a dmee file in transaction DMEE with same formt provided by bank/ another system .
    many Thanks

  • User-Exit or BADI for MB51

    Dear all,
    In MB51 report, sale order value is not showing values even though it actually has.
    What could be the reason?
    If the answer is User-exits or BADI, can u suggest me the correct user-exit or BADI.
    I have already tried the following user-exits by placing BREAK-POINT in the includes. But no where the execution is breaking.
    MBCF0002            Customer function exit: Segment text in material doc. ite
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc
    Plz give some suggestions.
    Regards,
    Prem

    Hi ,
    U need to change the layout of MB51 in order to get the SO no.
    goto MB51---> give some inputs ---> in the o/p screen ->click on the variant button-> on the pop screen u, top of it u will get 2 options
    1.Header
    2.Position
    click Position Button ---> here u will get all Fields avail. for this Report O/P , so u can add SO field and save the variant.
    regards
    Prabhu

  • How to find the user exits and BADIS from SPRO

    Hi all,
    please let us know how to find the User exits or BADIS for an application from SPRO.
    Regards,
    Madhavi

    Hi Varisetty,
    Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
    For User Exit:
    Put "/h" in the command box (to start debugging)
    Execute your transaction
    When you enter debugging - put a breakpoint at statement
    CALL CUSTOMER-FUNCTION
    the control will stop at all calls to User Exits
    For BAdi (it's simpler)
    Go to class CL_EXITHANDLER in SE24
    Enter method GET_INSTANCE
    Put a breakpoint in this method
    Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
    Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
    Cheers,
    Adi

  • EXIT or BADI to change FAX number in P O Messages at creation

    Hi all
    Looking for a user-exit or BADI to use to change the fax number of the PO Messages entry during creation/changing.  Using SAPscript.
    I am on SAP R/3 Enterprise 4.7.
    Regards
    Boniface

    Hi boniface,
    You can use User exit : EXIT_SAPMM06E_012, in that there is a I_LFA1 structure and
    field TELFX, change customer fax number here.
    regards
    kallam

  • Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

    Hi All,
    I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
    I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
    Thanks,
    Sudha

    Hi,
    Are you saying first create notification,then service order
    and then Sales order.
    But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
    Thanks & regards,
    chetan.

  • User Exit or BADI for Material,BOM,Customer,Vendor

    Dear All,
    I have requirement where if User A changes a Material X .It should go for approval by workflow.
    When the Material X is waiting for approval no other User should be able to change the material .It should give him a message
    and restrict him from changing the Material.
    Is there any User Exit or BADI to restrict him from changing the material. The exit or BADI should be called as soon as the Material is entered in MM02.
    I need exit or BADI for BOM, Vendor and Customer also.
    Thank you.

    Hi,
    You can go to Transaction SE80 and check in Function Group MATF. There have been two User Exits which are called during MM02 Transaction execution (via Analysis Transaction SE30) - MATERIAL_FIELD_SELECTION_NEW and MATERIAL_FIELD_SELECTION_COMB.
    BAdI called by FM MATERIAL_FIELD_SELECTION_NEW.
    Thanks and Regards,
    Prabhakar Dharmala

  • User exit or BADI for Tcode ME51N

    Hi All,
    My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
    Is there any user exit or Badi for this requirement. Kindly send me.
    Regards,
    Paras

    Hai,
    User Exit:  MEREQ001
    Function exit             EXIT_SAPLMEREQ_001  
                                   EXIT_SAPLMEREQ_002  
                                   EXIT_SAPLMEREQ_003  
                                   EXIT_SAPLMEREQ_004  
                                   EXIT_SAPLMEREQ_005  
                                   EXIT_SAPLMEREQ_006  
                                   EXIT_SAPLMEREQ_007  
                                   EXIT_SAPLMEREQ_008  
                                   EXIT_SAPLMEREQ_009  
                                   EXIT_SAPLMEREQ_010  
    Screen exit               SAPLMEGUI           
    Include tables           CI_EBANDB           
                                   CI_EBANMEM

  • User exit or badi for me52n transaction.

    Hi all,
           i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
    that is from the second row onwards, every plant should match with the first row plant.
    if any part of this issue is unclear, plz let me know so that i can explain it clearly
    this is urgent requirement.
    please let me know the solution as soon as possible.
    points will be awarded.
    thanking u in advance.
    A.srinivas.

    In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in  4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
    Regards

Maybe you are looking for