Administrator Log no letters

Hi everyone...
i has been installing new software at my imac(2011), but, in my administrator log i cant see anything...
What i can do?
See: https://dl.dropbox.com/u/95497203/2013-02-05%2018.32.48.jpg
Thx for any reply ^^

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
Mac 101: Font Book
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case only, after running Font Book, launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo atsutil databases -remove
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. After running the command, reboot as usual.

Similar Messages

No TACACS+ Administration Logging on ACS

I can get a csv file created for a TACACS+ Administration log/report [configured in Interface Logging of the ACS] but that log file is is empty. Help states that aaa accounting commands start-stop TACACS+ must appear in the access server or router configuration file in order to capture this day but my ASA 5520 will only allow;
aaa accounting command <server group> or <privilege>.
How do I get this ASA and Windows ACS to collect TACACS+ administration?
Note: My TACACS+ accounting does collect data on users ssh into the ASA.

It's quite possible that you might be experiencing a know bug ( CSCsg97429 ) in ACS version 4.1.
Get this Patch: Acs-4.1.1.23.5-SW.zip. It fixes the TACACS+ Administration log/report problem.
You rigth in regards to the command. It is needed for your NAS to send accounting information to the ACS.
Here's an example of the commands:
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
Hope it helps.

Unable to view Administrator Logs

Hello,
I am trying to view the Netweaver Administrator Logs to Troubleshoot a Runtime Error on Production Portal. But when I goto http:<host>:<port>/nwa -> Monitoring -> Logs And Traces , then I select Default Trace Option or Last 24 Hours Option in the Dropdown, it displays the Message : ' No records to display '. The same when I do for QA Portal it displays the Logs fine. What is missing for Prod. Portal which is not allowing to view the Logs.?
Any help would be highly Appreciated.
Thanks.

Pls check with your basis team whether the configuration to write the logs and traces were configured. It will be st by default but there might be a chance to set it to "OFF". In that case you will not get any traces or logs.
Thanks,
Mahe

I forgot my administrator log in to my macbook air os 10.7.5

I forgot my administrator log in to my macbook air os 10.7.5

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

Portal Netweaver Administrator Logs

Hello,
I want to view the Administrator Logs on the Portal for which I am going to http://<host>:<port>/nwa, but then it says 'Select systems before proceeding' and no logs are displayed.
Please help.

Hello,
Please check whether your sld is started or not, and technical system is created.
to check sld go to http://host:port/sld, configure sld and create technical system.
Thanks,
Sagar Pande

Can administrator log out a user from application

Hi
My application has functionality to display all the logged in users of the application. This screen ia available to only administrators of the application. Now can the administrator logout any of the logged in users from his own screen? If yes then how?
Could you please give me some pointers?
Thanks & Regards
Inder Jeet Singh

there are several ways an administrator can do that. but that depends on the way you manage your sessions.
how are you getting the list of logged users? if it is from the database based on some field in some table then you can give the functionality to administrator to set that value to the logged out status(or whatever you are using).
but that depends on the way your application is keeping trak of the logged users.

Tacacs+ Administration log Auditing

Hello ,
I am working as internal Auditor in Bank and i am having doubts about something on the logs generated by TACAS+ looking for someone assist on this.
My cocern is about Firewall changes which triggered on the Tacacs+ Administration, It shows you in terms of adding an IP address as Source to specifc group ( objects) as destination. What if I need more details about the destiation objects prviliages which I am adding this source to ,how can i identify these changes?

Hi Mahmoud,
You can send accounting messages to the TACACS+ accounting server when you enter any command other than show commands at the CLI.
To enable command accounting, enter the following command:
hostname(config)# aaa accounting command [privilege level] server-tag
and you do have this command in your configuration. Now if command accounting is not working in your case then you need to tell me what version of Cisco ACS are you running on, if it is ACS 4.1.1.23 then there is a defect that has been fixed in patc 5
The issue that you are facing could be due to,
CSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23.
aaa-server AuthOutbound protocol tacacs+
aaa authentication http console LOCAL
aaa authentication enable console TACACS+
aaa authentication serial console TACACS+
aaa authentication ssh console TACACS+
aaa authorization command TACACS+
aaa accounting command TACACS+
How to configure command accounting on ASA
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/mgaccess.html#wp1059882
Hope this helps.
Let me know if you need further help on this.
Regards,
Jatin
Do rate helpful posts~

Visual Administrator logs

Dear Experts
I am working in SAP XI and need to see some error logs. I know we can access it using SXMB_MONI, but I need to see it in Visual Administrator.
Can you please tell me where to find Visual Administrator?
Do I need an admin right to access it?
Points will be rewarded to satisfactory answers.

Hi,
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/68/f4bc3deaf28d33e10000000a11405a/frameset.htm
Its built with SAP J2EE Web Application Server.
Its basically used to administrate the SAP J2EE WAS(Administration tool).
we can adimistrate SAP J2EE WAS in different ways.
this is one of the GUI tool used to administrate.
J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster, all cluster elements, and all modules running on them. It provides remote monitoring and management of managers, services, libraries, and interfaces working on each element in a single GUI.
this is described in detail in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/23/fa1f1e5f6841cf92c64dc19d79f290/content.htm
USMM Equivalent thru Visual Administrator
Thanks
Swarup

Creating a disclaimer when users / administrator logs onto the PC / servers

Hi there,
I would like my administrators / users to see a security disclaimer banner when they log onto Windows regardless server or PC. All of our servers / PC are joined to a domain so is it possible if I can set the banner on the domain level so that all of the member
servers / PCs will automatically take effect?
The disclaimer banner is something like "The system is for use for authorized users only, anyone using this system without authority is subject to bla bla bla bla".
So each time they log onto their system via their windows domain ID and password, this banner is prompted to them first before they go into their desktop.
My domain controller is on W2K8 and some still on W2K3.

you can configure the interactive logon message through GPO.
check this KB http://support.microsoft.com/kb/310430/en-us

Bought from a friend, have apple account how do I run executable files when I cannot find the administrator sign in . I mean where in system file do i open administrator log in?

Am wanting to run executable files where in system is the administrator sign in?

If you are talking about .exe files, macs can't run those. Look for a .dmg version.

Show administrator logged on /your account has been disabled please see your system administrator

Thanks

Hello mixima1,
I see that you are having a log in problem with your HP computer. I would like to help with this issue but I need some information.
Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
How long have you been having this issue?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

ACS 3.3 Administration Logs

Hi
I am logging executed commands locally to my ACS, however the csv seems to only be a day old. How can I view all the csv's in multiple day by day files, like you can with the failed attempts loggs?
Thanks

First you need to check the following:
Go into "System Configuration" then into the "Logging" section. Select one of the logs that isn't working.
Scroll to the bottom of the page and check that:
a) The Log file management is set to Generate a new file every day
b) If the 'Manage directory' option is turned on, make sure the settings allow files to remain for more than one day.

Photosmart 7520 Embedded Web Services Administrator log in and password

I have a Photosmart 7520 and I am trying to use Embedded Web Services to modify some settings.
When I do so a screen pops up asking me to enter the User and Password. I dont recall setting this up.
I have tried:
1. User: admin password: [blank]
2. User: admin password: admin
3. User: admin password: password
I repeated the same but typed in Admin instead of admin for the above 3 options.
None of these work. I have searched everywhere for a solution but nothing.
I then tried to see if I could reset the printer into a state that is was in when I first unboxed it to start again. The only guidance on this for my printer is to turn the printer off by pushing the off button, unplugging it, waiting for a minute and starting again. That did not solve the issue either. The printer did not fully reset to the default when it was first unpacked and none of the above user password options worked.
There is nothing in the user manual on this.
Extremely frustrated having spent 3 hours of a Sunday trying to resolve this. Very poor!
This question was solved.
View Solution.

I am facing the same issue with my 7520. If you could send me that information I'd appreaciate it.

Can't log in as an administrator

My administrator log in will not work, even though I know I am using the right name and password. Because my log in won't work I cannot add many programs or even watch dvds. Unfortrunately I am past the 90 days of support, so I have been trying to fix the problem myself, but I can't even reload my mac software without the log in.

What about enabling 'root'??
That would give you another option. Now here's the bad thing...you have to have an admin account/password to enable it. In 10.5.x you go to Applications/Utilities/Directory Utility.
Then from the pull down menu, click on Edit, Enable Root User.
Keep in mind that this is an all powerful account. If you're logged in as 'root', you can do anything and it won't ask for confirmation. Now you might thinking that's a good thing but you then also remove all the safeguards that are in place to prevent root kits/viri/trojan horses from being installed.
That is while you're logged in as 'root'.
Message was edited by: oil_fan

ACS Tacacs administration report Log Analyzer

The logs in ACS are in .csv format. My system is generation huge logs due to more than 1000 devices configured in ACS. Is there any tools available to analyze the Tacacs administration logs ?
Regards
Hitesh Vinzoda

Hi Hitesh,
The only option you have is to download the .CSV files and import it into spreadsheets by using most popular spreadsheet application software. You can also use a third-party reporting tool to manage report data. For example, aaa-reports! by Extraxi supports ACS.
To download a CSV report:
=========================
# click Reports and Activity.
# Click the CSV report filename that you want to download.
# In the right pane of the browser, click Download.
# You can easily analyse the logs in Microsoft excel
How to filter and analyze logs ( with Regular Expression Syntax Definitions):
========================================
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp632961
For downloading third party application
http://www.extraxi.com/
For more info, you can download the user guide:
http://www.extraxi.com/PDFs/aaa-reports%20sales%20proposal%20-%20customer.pdf
HTH
Regards,
JK

Administrator Log no letters

Similar Messages

Maybe you are looking for