Administrator Login & Issue with Weblogic Admin Server Console
I recently applied a PeopleTools patch to a test environment. I will be doing this to production soon, and as I was going through my screenshots of what I did in test, I ran across an area that may cause me an issue when I apply it to production.
There is a screen which prompts you for the administrator login and password for the weblogic domain. I wasn't sure of this when I did it in test, but in the PeopleTools install doc, it said the default is system/Passw0rd
This worked fine in test. However, the person who set this up in production may have used a different password. I don't want to get halfway through the patch and have to abort because I don't know the password.
I did some research and read there was a file with this info. I think it was boot.properties, but it was encrypted.
I then started the Weblogic Admin Server Console in test and was able to login with system/Passsw0rd so that verified a way of confirming the password in test.
I tried to do the same in production, but the Weblogic Admin Server Console page does not come up. The webserver is running, and if it wasn't, my phone would be ringing. Why does the console not come up?
However, the screen that comes up during the patch that prompts you for this asks you to enter your password, and re-enter it on the next line, so maybe its setting the password, not verifying that you know it. Is this true, I could make it whatever I want?
The WebLogicAdmin_weblogic.log file has not been updated in months. This may have been when we did the last upgrade.
Can you tell me how to determine/verify this password?
Thanks,
Roger
I'm not sure if there's an easy way to verify this. If I'm not mistaken you'll have batch file called startweblogicadmin.bat in the bin directory. You have to start this to get the administrator console running. It will be running on port :9999 by default if you haven't changed this.
Similar Messages
-
Cannot access weblogic admin server console
All,
I am not able to access https://<myhostname>:7001/console URL after sucessfull installation of web logic server on linux. During installation I also created base_domain.
Here is the log during the AdminServer startup :-
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:20c:29ff:fe28:8f5b:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.119.129:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Production Mode>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
From the above it looks like there was no issue in starting up the admin server. But when I try to access the weblogic admin server url, it does not show up.
Can you please help me to resolve the issue if any so that I can access the admin console?
THanks,
Amithey, same here...
this is what i get when starting up the console
<May 4, 2010 12:52:51 PM WIT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on xxx.xxx.xxx.xxx:7777 for protocols iiop, t3, ldap, snmp, http.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7777 for protocols iiop, t3, ldap, snmp, http.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "xxxxxDomain" running in Production Mode>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but when i go to the browser
http://xx.xx.xx.xx:7777/console..
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
xx.xx.xx 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
i still try to fix this.. -
WebLogic Admin Server Console: Is it secure?
Hello,
I've attended both WebLogic classes (Basic and Advanced) and have never heard my instructor state that the Admin console is unsecure as opposed to WLST. I asked spcifically durin the Advanced class about this and was told all that was needed was to change the console name and port.
Another indiviudal who attended the first class with a different instructor told me his told him the console was not secure because everybody would have access to the console and could make changes, and that a lot of companies were not using it according to blogs.
The problem is he is telling a lot of people this, when I don't believe it.
Whose right?
ThanksHi,
You are right. You need to provide a user name and a password to access the Console so it is secure.
Default SSL is not used so some might argue the it is not secure since user name and password is send in clear text and can be sniffed. But in most situation the Weblogic installation are placed in a special network segment with a DMZ in front of it so I don't see the need for using SSL. But if needed you can just enable SSL for the Console and then it is more secure.
Also using the default port is fine since you have to provide a user name and password. On production systems I tend to not use weblogic as the default administrator user name. Then a hacker has to not only guss the password but also the user name.
Regards Peter Lorenzen
Edited by: Peter Lorenzen on Jun 21, 2011 4:17 AM -
Cloned OMS - WebLogic Admin Server not available....
Greetings,
We are working our way through an active active R4 OMS setup, and we just successfully cloned oms1 to oms2 via cloud control, and executed the post install steps. We now need to access each of the OMSs WebLogic Admin Server Console to confirm LDAP settings, and the oms2 WebLogic Admin Server Console is unavailable. The oms2 clone has the same WebLogic Admin Server details as oms1 (see below).
Is that by design, i.e. only one WebLogic Admin Server Console with two load balanced OMSs?
Which files do we need to edit on oms2 to get oms2's WebLogic Admin Server on-line?
oms1:
/u01/app/oracle/product/middleware_r4/oms/bin/emctl status oms -details
WLS Domain Information
Domain Name : GCDomain
Admin Server Host : oms1.mastec.com
Admin Server HTTPS Port: 7102
Admin Server is RUNNING
oms2:
WLS Domain Information
Domain Name : GCDomain
Admin Server Host : oms1.mastec.com
Admin Server HTTPS Port: 7102
Thank you,The WLS admin server only exists on the first OMS host. Usually an SLB is used for load balancing.
For information on HA (High Availability) solutions, see:
http://docs.oracle.com/cd/E24628_01/install.121/e24089/ha_intro.htm#EMADV9611
Regards,
- Loc -
Does the Weblogic Admin server need to be running after initial Connection?
Initially, I require a login to the Weblogic Admin Server.via my code
I am using JMX to monitor weblogic and all works great..I am trying to close the Admin Server and code blows up. Do I need the Admin Server running all the time?
Do you know of a way to connect initially to the Admin to get all Nodes, thendisconnect from Admin and monitor Nodes only? Thank you.I notice you didn't get a response when you asked this two weeks ago, either. You'd probably get a better response if you asked this on a WebLogic forum.
-
Weblogic Admin server restart issue
While restarting Oracle Weblogic Admin server, it is not running after below log.
INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver.
Mar 12, 2015 7:33:07 PM oracle.security.jps.internal.idstore.util.LibOvdUtil pushLdapNamesToLibOvd
INFO: Pushed ldap name and types info to libOvd. Ldaps : DefaultAuthenticator:idstore.ldap.provideridstore.ldap.Hi,
These messages are Info Message Can you please post the complete Error stack for the same
Check the below threads which have similar issue reported
Integrated JDeveloper Weblogic 12C issues
Weblogic server not starting due to OutOfMemory
SOA Suite 12c Integrated Weblogic / Coherence Issue
Unable to run my application
Hope it helps -
Not able to start the weblogic admin server
Hi,
I am getting the error while starting the weblogic admin server of OAM console.
Below is the stack trace of the error
####<Sep 18, 2013 4:47:14 AM IST> <Info> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834234> <BEA-000000> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
####<Sep 18, 2013 4:47:14 AM IST> <Info> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834387> <BEA-000000> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
####<Sep 18, 2013 4:47:14 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834847> <BEA-000000> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.10-b01 from Sun Microsystems Inc.>
####<Sep 18, 2013 4:47:15 AM IST> <Info> <Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459835526> <BEA-000000> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
####<Sep 18, 2013 4:47:16 AM IST> <Critical> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459836980> <BEA-000000> <Could not decrypt the username attribute value of {AES}MCSBg4hMfpsECc7LXYV6gR52kLO5DHUWyo9I1UZXMaE= from the file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
####<Sep 18, 2013 4:47:16 AM IST> <Critical> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459836980> <BEA-000000> <Could not decrypt the password attribute value of {AES}1hgzo9/RGaCoWQyFXIJEbYMqmz5gg9LQzjQ/J6DxbQM= from the file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849081> <BEA-000000> <Server state changed to STARTING>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WorkManager> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849088> <BEA-000000> <Initializing self-tuning thread pool>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849138> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <Log Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849208> <BEA-170019> <The server log file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Log Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849213> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Diagnostics> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849260> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849305> <BEA-002622> <The protocol "t3" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849305> <BEA-002622> <The protocol "t3s" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849306> <BEA-002622> <The protocol "http" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849306> <BEA-002622> <The protocol "https" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849307> <BEA-002622> <The protocol "iiop" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849307> <BEA-002622> <The protocol "iiops" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849308> <BEA-002622> <The protocol "ldap" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849308> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849310> <BEA-002622> <The protocol "cluster" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849311> <BEA-002622> <The protocol "clusters" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849313> <BEA-002622> <The protocol "snmp" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849314> <BEA-002622> <The protocol "admin" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849314> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <RJVM> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849325> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address :7003
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Sep 18, 2013 4:47:29 AM IST> <Critical> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849347> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:175)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: weblogic.security.internal.encryption.EncryptionServiceException
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:139)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:187)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849410> <BEA-000365> <Server state changed to FAILED>
####<Sep 18, 2013 4:47:29 AM IST> <Error> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849410> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849411> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849412> <BEA-000236> <Stopping execute threads.>
Kindly help me to solve this issue.
Is anyone had faced this issue.....Hi,
I had tried by putting the username and password in boot.properties but we are getting the same issue.
we tried by editing the config.xml file of the domain.
i.e. by
Before: <credential-encrypted>{AES}b3I7UhWtRyj4DuKMIDVtW4Ln2nzH+HiYRhhQw1H2qpU0qJMOaDlK8iFZ+LvlJu+iZs6pptFJgWz8ryyudL1Zyvf00Rg11z9Iib7hoDC8covMFuig8wx7iOGK88zeKH7U</credential-encrypted>
After: <credential-encrypted>MyCredentialInPlainText</credential-encrypted>
and restarted the admin server but shows the same error.
kindly suggest us... -
Problem while starting Managed Servers from Admin Server console
I am facing a problem while trying to start the managed servers in wlp8.1 portal from the admin server console.
<Dec 7, 2004 4:52:14 PM IST> <Info> <NodeManager@*.*:5555> <Starting Server orbitPortalDomain::orbit_ManagedServer1 ...>
<Dec 7, 2004 4:52:16 PM IST> <Info> <NodeManager@*.*:5555> <Server orbitPortalDomain::orbit_ManagedServer1 started, process id = 1,832>
<Dec 7, 2004 4:52:17 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.4.2_04-b05 from Sun Microsystems Inc.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://10.6.0.212:7001 to check if there exists a running admin server at this URL.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic XMLX Module 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973 >
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://10.6.0.212:7001 to retrieve the initial configuration.>
<Dec 7, 2004 4:52:21 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\bea_turner\weblogic81\common\nodemanager\orbit_ManagedServer1\orbit_ManagedServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/bea/wsrp/util/debug/Debug
at com.bea.wsrp.security.WSRPIdentityAsserterProviderImpl.<clinit>(WSRPIdentityAsserterProviderImpl.java:45)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.createSecurityProvider(SecurityServiceManagerDelegateImpl.java:232)
at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:939)
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:257)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.java:698)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:731)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:874)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:717)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
Reason: com/bea/wsrp/util/debug/Debug
pls advice
Thanks
SasankaHello,
There is a lot of stuff on this thread:
http://forum.java.sun.com/thread.jspa?threadID=567363&messageID=2801617
these guys are trying to run weblogic with JBuilder.
Looks like your classpath is incorrect, can you go to your admin console-->server-->remote start
copy the classpath and post it here.
Check for spaces in your classpath, missing jars or directories and miss spelt paths.
Has this problem been occuring as soon as you installed WLP or not?
Cheers,
Hoos -
WebLogic Admin server fails to start after reboot
Hi Gurus,
Weblogic Admin server won't start up after a server reboot. Note that weblogic was gracefully shutdown before the restart.
Also note that the following files were accidentally deleted after the reboot (but I don't think that should cause an issue..):
/opt/shared/apps/hyperion/Oracle/Middleware/user_projects/domains/EPMSystem/servers/AdminServer/data/store/default/_WLS_ADMINSERVER000000.DAT
/opt/shared/apps/hyperion/Oracle/Middleware/user_projects/domains/EPMSystem/servers/AdminServer/data/store/diagnostics/WLS_DIAGNOSTICS000000.DAT
Looking at the AdminServer.log:
*####<Oct 11, 2012 11:27:53 AM EDT> <Critical> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969273846> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: weblogic.management.provider.EditFailedException:*
java.lang.AssertionError: weblogic.management.provider.EditFailedException:
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:79)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:83)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: weblogic.management.provider.EditFailedException:
at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1754)
at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:76)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:83)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: org.xml.sax.SAXParseException: Premature end of file.
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:1059)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284)
at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at weblogic.management.provider.internal.ConfigReader.convert(ConfigReader.java:106)
at weblogic.management.provider.internal.ConfigReader.<init>(ConfigReader.java:70)
at weblogic.management.provider.internal.ConfigReader.<init>(ConfigReader.java:64)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(EditAccessImpl.java:1917)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTreeFromPending(EditAccessImpl.java:1807)
at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1740)
at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:76)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:81)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:232)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:154)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:26)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
####<Oct 11, 2012 11:27:54 AM EDT> <Notice> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274051> <BEA-000365> <Server state changed to FAILED>
####<Oct 11, 2012 11:27:54 AM EDT> <Error> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274053> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Oct 11, 2012 11:27:54 AM EDT> <Notice> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274069> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274138> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.domainruntime .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274140> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.edit .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274141> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.runtime .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebService> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274146> <BEA-220028> <Web Service reliable agents are suspended.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebService> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274153> <BEA-220029> <Web Service reliable agents are shut down.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <MessagingBridge> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274318> <BEA-200001> <The messaging bridge service has successfully shut down.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274426> <BEA-040308> <JMS service is suspending.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274506> <BEA-040107> <Undeployed 8 default connection factories.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274510> <BEA-040015> <JMS shutdown is complete.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274530> <BEA-001144> <Force Suspending the JDBC service.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274536> <BEA-001146> <Force suspend of the JDBC service completed.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274538> <BEA-001147> <Shutting down the JDBC service.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274552> <BEA-001149> <Shutdown of the JDBC service completed.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274694> <BEA-000236> <Stopping execute threads.>
Kindly guide me with this. Thanks!
Edited by: Kent Pawar. on Oct 11, 2012 8:51 AMIssue is :
Caused By: weblogic.management.provider.EditFailedException:
One probable reason can be some change made to the config.xml file . If you have previous backup for the config.xml file then try to replace the config.xml file and restart the server .
Another reason for this exception may be that there were some changes made to configuration through the Admin Console which were not activated completely and Admin Server was restarted . under this scenario weblogic will create a /pendig dir and have a config.xml file created there with the un-activated changes .
some workaround you can try to restore the Admin Server :
Under domain dir ,
\pending directory -- take backup and delete the dir .
Under Admin Server Dir :
data\store --- take backup and delete the dir .
thanks,
Sandeep -
WebLogic admin server not starting.
Hi all,
I have a problem with my WebLogic Admin server not starting. Following a VM reboot last week our admin servers are no longer starting. On this particular server we have 3 admin servers serving 3 separate environments.
Theserver seems to be getting stuck right at the very start. I have tried removing tmp, cache and ldap directories. Searched for and removed all .lok files. I have manually turned on full debug to try and flush some extra information through standard out but no luck. It is very peculiar. When we have exported the domain to another box and started the admin server it has come up successfully.
This is the output from the logs - this is literally as far as it get before it hangs and does nothing. As far as I know the next thing WebLogic is doing is checking the version. Has anyone any ideas what the problem could be? It is server wide as all 3 admin servers on the same box are suffering the same problem.
This is Weblogic 10.3.2 on a Solaris vm
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/lib/tools.jar:/apps/Oracle/Middleware64/utils/config/10.3/config-launch.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.jar:/apps/Oracle/Middleware64/modules/features/weblogic.server.modules_10.3.2.0.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/webservices.jar:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/apps/Oracle/Middleware64/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/apps/Oracle/Middleware64/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/xqrl.jar
PATH=/apps/Oracle/Middleware64/wlserver_10.3/server/bin:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/jre/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin:/usr/bin:/usr/sfw/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin/java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/apps/Oracle/Middleware64/wlserver_10.3 -Dwls.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
<09-Jan-2013 18:32:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-21-133393-1.6.0_20-20100512-2127-solaris-sparcv9 from Oracle Corporation>Just a wild guess (as you have restarted the physical servers), it could be related to the entropy of the machine.
What you can try to do is edit the java.security file in the $JAVA_HOME/jre/lib/security directory.
Find the entry securerandom.source and edit the value to file:/dev/./urandom (instead of file:/dev/urandom) -
Need to write start up scrits for weblogic admin server on Linux
Hi,
I am new to weblogic i have Installed wls1035 on Linux Created Managed servers,but i want write start up and stop scripts for weblogic admin server please let me know how to write.
My weblogic server is Running on Linux..please help me its very urgent for me.....Put something like this into a startAll.py file (excluding the ---):
startNodeManager(verbose='false',NodeManagerHome=localWlsHome + '/common/nodemanager',ListenPort=5556,ListenAddress=localhost)
nmConnect('weblogic','password','localhost','5556','domain_name')
nmStart('AdminServer','/path-to-domain-dir')
nmStart('my_server_1','/path-to-domain-dir')
nmStart('my_server_2','/path-to-domain-dir')
nmDisconnect()
exit()
source /path-to-domain-dir/bin/setDomainEnv.sh
$JAVA_HOME/bin/java weblogic.WLST startAll.py
Similar for stop (stopAll.py):
nmConnect('weblogic','password','localhost','5556','domain_name')
nmKill('my_server_1')
nmKill('my_server_2')
nmKill('AdminServer')
stopNodeManager()
exit()
source /path-to-domain-dir/bin/setDomainEnv.sh
$JAVA_HOME/bin/java weblogic.WLST stopAll.py
You might have issues with the Nodemanager having an autogenerated username and password. That can be fixed like this:
In the AdminServer console, click on Lock & Edit
In the AdminServer console, go to <domain> -> Security -> General -> Advanced and update the Node Manager username and password to use the same values as the WebLogic server.
In the AdminServer console, apply the changes.
Start WLST: $WL_HOME/common/bin/wlst.sh
Connect to the AdminServer: connect('weblogic','password','t3://<adminserver-hostname>:<adminserver-port>')
Enroll: nmEnroll('/path-to-domain-dir')
Exit WLST: CTRL^D
You might also look into customizing the nodemanager's property file:
Edit $WL_HOME/common/nodemanager/nodemanager.properties
StopScriptEnabled=true
CrashRecoveryEnabled=true
StartScriptEnabled=true
For further reading, please take a look at: http://docs.oracle.com/cd/E15051_01/wls/docs103/config_scripting/reference.html
Edited by: 925121 on Apr 3, 2012 2:16 AM -
Admin server console forbidden
Hi,
in weblogic 11gR , in user projects, base-domain when click on Admin server console, in browser I will have HTTP 403 Forbidden. And in cmd box of start Admin server I have :
<30 avr. 2010 13 h 37 CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30 avr. 2010 13 h 37 CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30 avr. 2010 13 h 37 CEST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on
<30 avr. 2010 13 h 37 CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30 avr. 2010 13 h 40 CEST> <Error> <org.apache.beehive.netui.pageflow.internal.AdapterManager> <BEA-000000> <Servl
etContainerAdapter manager not initialized correctly.>Thank for help.If you have Configuration Auditing enabled ( Domain -> Archive Configuration Count value greater than 0 )
- "The number of archival versions of config.xml saved by the Administration Server each time the domain configuration is modified." -
you would have older / backup copies of the config.xml created ( in the domain_home / configArchive.
If you are only maintaining 1 copy of config.xml, it is more difficult to restore a working version.
Is the console enabled in your config.xml?
<console-enabled>true</console-enabled>
<console-context-path>console</console-context-path>
<console-extension-directory>console-ext</console-extension-directory>
Is your admin server responding to telnet on that IP:Port combination?
Does the console page display at all? Or does it display but you are unable to login?
Is the listen port enabled?
<listen-port>7001</listen-port>
<listen-port-enabled>true</listen-port-enabled> -
Error starting weblogic Admin server
Hi All,
I am not very familiar with Fusion and weblogic but here is my situation:
Background: I am trying to install Fusion Middleware so I can integrate Oracle Transport Management with E-Business Suite (as per note Integrating Oracle E-Business Suite Release 12 with Oracle BPEL in Oracle SOA Suite 11g (Doc ID 1321776.1))
I just installed the following on Oracle Enterprise Linux 64bits
- SOA Suite 11.1.1.7.0
- Weblogic Server 10.3.6
-JDK 1.7.0_25
-Jdev 11.1.1.7.0
When starting the weblogic Admin server using "DOMAIN_HOME/startWebLogic.sh' I get an error:
Starting weblogic with Java version:
Unrecognized option -jrockit
Error: Could not create the Java virtual machine
I found a few thread with similar issue (for different versions of SOA suite) where it got fixed by changing some parameters in the cmd file but I am not sure they apply to my case.
Is the jdk version compatible? (I can start JDeveloper ok) , if not which one is the appropriate version. If i need to change it, can you provide details of how to do it? (I am not expert on SOA/Jdev )
Can you please help me here ?
Thanks in advance!Well, I tested it
java -version and it shows :
1.7.0_25
Java HotSpot 64 bit Server VM
--> So I guess the problem is I don't seem to have the jrockit.
I donwloaded it (Rel 28.7) and installed it. During installation it says "for JDK 1.6.0_45"
Anyway. I let it install anyway and I modified the PATH to point to the Jrockit bin directory. Then run java -version and it now shows JDK 1.6.0_45 and jvm as rockit
Now I tried to start the weblogic server and I get the same error. it still uses the JDK 1.7
So.. again.. is this supported with JDK 7 ?
How can I fix it now that I installed everything using the JDK 7?
Thanks -
Weblogic Admin server - Configuration/Server Start/Arguments ignored?
Hi,
I'm trying to specify a http proxy for a WebLogic Admin Server in order for an application to access external resources. I've placed the settings into the "Server Configuration / Server Start / Arguments", and verified that they have been saved into the config/config.xml file for that domain:
<server-start>
<arguments>-Dhttp.proxyHost=[XXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXX]</password-encrypted>
</server-start>
However, no matter how I start the server, these settings are ignored despite that the documentation states these should be added to the java command line.
starting weblogic with Java version:
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
As a test I created a new managed server in the same domain, specifying the same startup properties, and they were picked up during startup.
If I manually place the settings into the bin/setDomainEnv.cmd batch file for the domain they are also picked up and work.
Is there an undocumented restriction on Admin Servers that they ignore the "Server Start / Arguments" setting, or is there something else I can check as to why this is not working?
Many thanks,
- Micha.Umm... I already pasted the relevant snippet out of the config.xml, but following is the entire file. The startup arguments, as specified in the admin console, are:
-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080
which matches what is saved in the config.xml.
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>wls_starter</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>wls_starter</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>[XXXXXXXX]</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>-1</max-http-message-size>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>bySize</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-min-size>500</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Trace</logger-severity>
<logger-severity-properties></logger-severity-properties>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Debug</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>false</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine>[XXXXXXXXXX]</machine>
<listen-port>8080</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<frontend-http-port>0</frontend-http-port>
<frontend-https-port>0</frontend-https-port>
<keep-alive-enabled>true</keep-alive-enabled>
<keep-alive-secs>30</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
<post-timeout-secs>30</post-timeout-secs>
<max-post-size>-1</max-post-size>
<send-server-header-enabled>false</send-server-header-enabled>
<wap-enabled>false</wap-enabled>
<accept-context-path-in-get-real-path>false</accept-context-path-in-get-real-path>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<tunneling-enabled>false</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<server-start>
<arguments>-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXXXXX]</password-encrypted>
</server-start>
<server-life-cycle-timeout-val>30</server-life-cycle-timeout-val>
<startup-timeout>0</startup-timeout>
<graceful-shutdown-timeout>30</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>false</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<embedded-ldap>
<name>wls_starter</name>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>[XXXXXXXXXX]</name>
</machine>
<jms-server>
<name>WseeJmsServer</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<jms-server>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<self-tuning>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>AdminServer</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>AdminServer</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_WSEEJMSServer</name>
<target>WseeJmsServer</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<sub-deployment>
<name>[XXXXXXXXXX]</name>
<target>[XXXXXXXXXX]</target>
</sub-deployment>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jdbc-system-resource>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
</domain> -
Errors & warnings when using the Admin Server Console - Help Needed
hi,
i just installed weblogic 12c and created a new domain which contains an adminServer and managedServer under
one cluster.
after finishing the installation, i started the Admin Server and afterwards started the admin server console.
and i got the next warning and errors.
the warning look like this:
<20:00:35 IST 23/03/2012> <Warning> <Munger> <BEA-2156203> <A version attribute
was not found in element "web-app" in the deployment descriptor C:\Oracle\Middle
ware\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_internal\cons
oleapp\jxhze9\console-ext\sipserver-console-ext\WEB-INF\web.xml. A version attri
bute is required, but this version of the WebLogic Server will assume that the l
atest version is used. Future versions of WebLogic Server will reject descriptor
s that do not specify the Java EE version. To eliminate this warning, add an app
ropriate "version=" to element "web-app" in the deployment descriptor.>
the errors look like this:
<20:01:51 IST 23/03/2012> <Error> <netuix> <BEA-423158> <No content found at con
tentUri = /PortalConfig/security/providers/AuthenticatorConfigCommon.portlet.>
what is the problem? anyone knows?If you want to have an weblogic environment with one domain having server spread across different physical machines , then you will have to perform the installations of the weblogic server separately on all the machines . Also make sure that the version of the Weblogic server you are installing is same across the machines and the directory structure is also exactly same.
In short you will have to perform the below steps :
1 : install the weblogic server on all the machines with exactly same version and same dir structure .
2 : Create domain on MachineA providing all the details of the Managed Server and different machine hostnames.
3 : Start the Admin Server on machineA and then shut down it.
4 : execute the WLST pack command on MachineA creating a domain template JAR file.
5 : copy the create jar file on all the Machines ( B , C , D ) you have to distribute your domain.
6 : Execute the WLST unpack command on all the machines ( B , C , D ) .
7 : Execute the WLST nmEnroll () command on all the machines ( B, C , D ).
8 : Start the Managed Servers on all the machines ( B , C , D )
Maybe you are looking for
-
hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx af
-
ACS 3.1: CSTacacs service failure on W2k SP3
Hi all We are experiencing problems with our ACS server, whereby the CSTacacs services fails and the following errors are generated in the 'Event Viewer': 1) From the 'Application Log', in 'Event Viewer': CSTacacs could nto be started. Failed to init
-
Hello, We have a development request that has been asked by several customers: The down payment account is not automatically reconciliated when the real invoice is created on the system. It will be good if this account is automatically reconciliated
-
Is there anyway to keep an incremental counter in an XSLT stylesheet? I would like to append this counter to several element names to maintain uniqueness. Thanks Kathy
-
Restricting query\where in forms 6i
Hi, Is it possible to restrict the users from using Query\Where in forms 6i Thanks in advance.