Administrator Not able to login Into Portal

Hi,
Adminitsrator not able to login into Portal system. I could access succesfully in visual admin .
Other users can enter in portal screen. I have reset administrator password even then not able to login..
- Kritene

Hi Kristene,
The admin user can get locked due to numerous unsuccessful logon attempts. To correct this situation, you have to use an emergency user SAP*. In the SAP Library, use the following path: "SAP Library -> SAP NetWeaver Library -> SAP NetWeaver by Key Capability -> Security -> Identity Management -> User Management Engine -> Administration of Users, Groups, and Roles -> Activating the Emergency User".
Log on to the Visual Administrator using the emergency user and unlock the Administrator user. Afterwards, deactivate the emergency user.
Regards,
Pooja.

Similar Messages

Administrator Not able to login into EP

Hi,
Adminitsrator not able to login into Portal system. I could access succesfully in visual admin .
Other users can enter in portal screen. I have reset administrator password even then not able to login..
- Kritene

Hi Kristene,
The admin user can get locked due to numerous unsuccessful logon attempts. To correct this situation, you have to use an emergency user SAP*. In the SAP Library, use the following path: "SAP Library -> SAP NetWeaver Library -> SAP NetWeaver by Key Capability -> Security -> Identity Management -> User Management Engine -> Administration of Users, Groups, and Roles -> Activating the Emergency User".
Log on to the Visual Administrator using the emergency user and unlock the Administrator user. Afterwards, deactivate the emergency user.
Regards,
Pooja.

Framework page error not able to login into portal

Hi,
we are using EP 6.0 and it's working fine today i'm trying to login into portal but it's gives me the following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.layoutPortal1_Framework
Component Name : com.sap.portal.layouts.framework.framework
i didn't understand what happened, we are not doing any change in portal.
regards,

Have you tried looking at the LogViewer service in Visual Admin? defaultTrace.trc may contain more information which can help solve the problem. If you can post the error messages you see for the time you log in, we may be able to help more.
Regards
Darren
<a href="http://www.fortybeans.com/">Read my blog</a>

Not able to login into portal

Hi,
from today morning our user facing problem,
no one can login into portal, when use enter user id and password in logon page then press to login, the logon page appear agains without any message?
what could be the reason?
EP version 7.0
database : SQL 2005
regards,
kinjal

HI,
look like problem with keystorage.
open J2EE visual Admin tool from following location
<drive:>\usr\sap\SID\JC<inst_no>\j2ee\admin\go.bat
connect it.
expand server -> services -> click on Key Storage -> under view select TicketKeystore
delete SAPLogonTicketKeypair and SAPLogonTicketKeypair-cert and create it again with CN=SID,OU=SAP Web As,O=SAP Trust Community,C=IN
C= your country
restart the portal server.
regards,
kaushal

Able to login into Portal with http but not https

NT4
8.1.6.3 DB
9iAS 1.0.2.2
Oracle Portal 3.0.9
I have been following Note 136153.1 to configure Oracle Portal to use HTTPS.
I am able to login into Portal using http(e.g) http://machinename.net/pls/portal30. I have configured http.conf asdescribed in
136153 and used the ssodatan script to associate the login server with https.
I am able to connect to https://machinename.net and can see theSecurity
Certificate. I am also to login into
https://machinename.net/pls/portal30/admin_/gateway.htm?schema=portal30 and see
the Gateway configuration. It is only when I go to
https://machinename.net/pls/portal30 I receive the error message -
Error: Timeout
occurred whilst retrieving page meta data.
If I revert the settings back toPort 80 in http.conf back to Port 80 and
re-run ssodatan using http://machinename.net/pls/portal30 etc then I am able to
succesfully log intoPortal
Can anyone help with this?
null

Hi Arun,
Most of the times unable to login to portal causes due to network problems
Please ensure in backend system all application servers are up in SM51
if it is happening every day same time check java patches

Could not able to login into Oracle

Hi ,
I am using Oracle 9i as Database .
I am not able to login into Database please help .
when i tried with system and admin it displays : Invalid username/password ; logon denied
when i tried with scott/tiger : It displays account is locked.
Please help how can i resolve .

Thank you.
i opened a cmd prompt and ran your command
It displayed all these , sorry i dont know what to eliminate so posting the full .
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\sai>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\sai\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=GECE-8403C670A1
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\sai
JSERV=D:\oracle\ora90/Apache/Jserv/conf
LOGONSERVER=\\GECE-8403C670A1
NUMBER_OF_PROCESSORS=2
OLAP_HOME=D:\oracle\ora90\olap
OS=Windows_NT
Path=D:\oracle\ora90\bin;D:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\
Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys
tem32\Wbem
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\sai\LOCALS~1\Temp
TMP=C:\DOCUME~1\sai\LOCALS~1\Temp
USERDOMAIN=GECE-8403C670A1
USERNAME=sai
USERPROFILE=C:\Documents and Settings\sai
windir=C:\WINDOWS
WV_GATEWAY_CFG=D:\oracle\ora90\Apache\modplsql\cfg\wdbsvr.app
C:\Documents and Settings\sai>sqlplus
SQL*Plus: Release 9.0.1.0.1 - Production on Sat Jan 2 22:56:31 2010
(c) Copyright 2001 Oracle Corporation. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
With the Partitioning option
JServer Release 9.0.1.1.1 - Production
SQL> select * from v$version
2 ;
BANNER
Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
PL/SQL Release 9.0.1.1.1 - Production
CORE 9.0.1.1.1 Production
TNS for 32-bit Windows: Version 9.0.1.1.0 - Production
NLSRTL Version 9.0.1.1.1 - Production

I m not able to login into VIBGYOR kid website via ipad

I m not able to login into parents login at VIBGYOR kid website via ipad. I m using google chrome to visit the website.

try another browser and see if that helps. Can you log in to that site on your computer?

Not able to login into CUCM web administation page

Hi team,
          I have changed the CUCM hostname and ip address using CISCO unified communications answer file genarator tool. After that i am able to login into CUCM console using new credentials but when i tried to login into CUCM administation page it is throwing "Database Communication error" ,please check the attached image.
           So is there any workaround or solution for this.
Note: I am able login into OS administration successfully..
Thanks in advance.
Sasikumar.

Hi Chris,
     When i tried to check the Db replication status it is showing as "no values are returned" .
     command Used:      admin: show perf query class "Number of Replicates Created and State of Replication"
     O/p:     no values are returned
     Need help on this.
Thanks in advance,
Sasikumar.

Not able to login into the systems even though providing the correct credentials

Hi
not able to enter into system as it is stopping me at login page.
I am providing correct credentials still not able to login.
thanks
swathi

The username and password for BAM is system/manager.
Chris
Adobe Enterprise Developer Support

Could not able to login into HU6 PI 7.1 ES Workplace

Hi,
I have registered for the ES workplace systems . And got the approval and user details for logging.
I could not able to login to the PI 7.1 system with the details provided.I have tried logging into HU2 ERP 6.0 and worked fine I could log into it.Please suggest me how to go with it.
Thanks in anticipation.
Regards,
Sharath

Hi
Not able to login means that the usename and password is not valid or the user has not been created for the particular system.
Raise a support ticket for the same.
Regards
Monika

Not able to login into hyperion Workspace.

Hi,
We have upgraded from Essbase from 9.3.1 to 11.1.1.3 sucessfully. I have also done the reconfiguration sucessfully. I have started all the services of essbase withou any problem. I am able to login into shared services howerver when i login into workspace i am getting the error.
1) I have restarted the HFR and Workspace many times and reconfigured many times but still the same problem.
2) when i say netstat -an | grep 6800 the port 6800 is not listening. Is there any service 11.1.1.3 to start this service. The other ports like 8200 and 8299 are listening.
Attached are the screenshots from my blog. http://hyperion-consulting.blogspot.com
Kindly help me out.
Regards,
VJ

Here are details about starting the workspace agent - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s03s05.html
workspace web app - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s03s17.html
script to start all epm services running on a machine - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s01.html
Cheers
John
http://john-goodwin.blogspot.com/

Not able to login to portal links

Hi,
I am not able to login to any link from index.html page except system information page.
When I try to access any other link and enter user name and password, only page is getting refreshed and it is not logging in.
Error from default trace:
#1.5 #00188B34FD33006C0000002800007AC8000461B1DE2BD2F2#1233316471589#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_ADMIN#2018##mysapbw_BW7_23635150#J2EE_ADMIN#c13b1ba1eec411dd9cbb00188b34fd33#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Server/WebRequests#Plain###application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: java.lang.NoSuchMethodError: com.sap.security.core.wd.umeuifactory.wdp.IExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
Exception id: [00188B34FD33006C0000002600007AC8000461B1DE2BCF03]#
#1.5 #00188B34FD33005F000004A300007AC8000461B1E07DB217#1233316510512#com.sap.engine.services.security.authentication.logonapplication#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.authentication.logonapplication.doLogon#J2EE_GUEST#0##n/a##d88d4300eec411dd9ac900188b34fd33#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###doLogon failed
[EXCEPTION]
#1#com.sap.security.core.logon.imp.UMELoginException
     at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949)
     at com.sap.security.core.logonadmin.ServletAccessToLogic.logon(ServletAccessToLogic.java:208)
     at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.doLogon(SAPMLogonLogic.java:914)
     at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.uidPasswordLogon(SAPMLogonLogic.java:578)
     at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.executeRequest(SAPMLogonLogic.java:158)
     at com.sap.security.core.sapmimp.logon.SAPMLogonServlet.doPost(SAPMLogonServlet.java:60)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Please help me in resolving this issue.
Regards,
Nallasivam.D

Processing HTTP request to servlet dispatcher finished with error.
Check std_dispatcher.out for errors.
com.sap.security.core.logon.imp.UMELoginException
Check your UME setting using configtool
Regards
Juan

Could not able to login into APEX Application

Hi All,
Finally with the help of Jes and Anthony, I am bale to see Apex login page and Apex Admin login page.
But there are some issues in that, images are not properly displayed and also i could not able to login to admin page and even apex login page...It is showing some Javascript errors.
How shall I resolve them and work on APEX Application.
Thanks & Regards
Vishwanath GNV

Vishwanath,
Is this linked to one of your other posts? If it is a related problem then please try and keep it in one thread because it makes it much much easier for people to follow the flow of 'conversation'. By starting a new thread it makes it difficult to see what has already been tried etc.
Ok...so images and javascript are not working...so the obvious questions are -
1) Did you copy across all the Javascript, images etc as directed in the installation/upgrade guide?
2) Have you tried clearing your browser cache?

Users are not able to login to portal

Hi,
In our NWDI server, none of the users able to login. I can able to login to Visual administrator and checked the user status which is unlocked.
It is not showing any error messages even.
Any suggestions?
Regards,
Kalainila B

Have you renewed your portal certificate recently? We had an strange issue, once you putted the user and the correct answer it simply disappeared and the screen was showing the login screen ....
The problem was that when we recreated the ticket in the visual admin we had made a mistake and the SAPLogonTicketpair was written with one capital letter in wrong place. The result: nobody can log in, even with the SAP* user.
The solution was simple, regenerate the portal certificate with the correct name .....

Not able to login into presentations server

Hi,
I have installed OBIEE in my local machine. As a part of report creation I have created an rpd file and changed the NQSConfig.ini file as mentioned in
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html.
Then I have re-started the OC4J server and all the OBIEE services. Then I open the Presentation Services, I am not able to log in. The error shown is
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 12008] Unable to connect to port 9703 on machine . [nQSError: 12010] Communication error connecting to remote end point: address = ; port = 9703. [nQSError: 12002] Socket communication error at call=: (Number=-1) Unknown (HY000)+
I have checked the Log file (NQServer.log file in /OracleBI/Server/log folder). The Entries in the Log file are like this
2009-10-27 18:00:42
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-27 18:00:42
[14055] Loading subject area: EventHub ...
2009-10-27 18:00:42
[14056] Finished loading subject area: EventHub.
2009-10-27 18:00:42
[43030] :     Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
2009-10-29 14:09:42
[nQSError: 12002] Socket communication error at call=send: (Number=10038) An operation was attempted on something that is not a socket.
2009-10-29 14:29:23
[43031] :     Oracle BI Server shutdown.
2009-10-29 14:29:26
[14058] Unloaded all subject areas.
2009-10-29 15:01:55
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-29 15:01:55
[14055] Loading subject area: EventHub ...
2009-10-29 15:01:55
[14056] Finished loading subject area: EventHub.
2009-10-29 15:01:55
[43030] :     Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
I have already gone through the forums which are already logged reporting the same error. But I dint get any pointers to the solution.
Please let me know what might have gone wrong and how I can login to the Presentation Server and continue with report creation. Please let me know if you need further information on this .
Thanks in advance for your time,
Raj Kumar

Hi,
The following is the NQSConfig.ini file.
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star     =     EventHub.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE     =     NO;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS     =     "C:\OBIEE\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE     =     "English-usa";
SORT_ORDER_LOCALE     =     "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS     =     "C:\OBIEE\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
MINIMUM_PASSWORD_LENGTH     =     0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
#AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME     =     "C:\OBIEE\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH     =     "C:\OBIEE\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME     =     "C:\OBIEE\OracleBI\server\Log\OraDimExp.Log";
One more thing is that I have kept the BI server (OC4J server) runnung.
Does the time of the error in NQSServer.log match with when you try to login to Presentation Services?
I donot see any error matching the time of loginto presentation services.

Administrator Not able to login Into Portal

Similar Messages

Maybe you are looking for