Admins: What changed with this FAQ I posted?

When I initially composed and posted the FAQ for the Photoshop/Mac section at the following link...
http://forums.adobe.com/thread/421402?tstart=0
...I coded it to include the full size version of the following image, with the direct link just below it for the benefit of those pesky text-only participants ():
I coded it to display the full-size (492pxW) image because the Jive image-shrinking routine was doing some bizarre distortion to the reduced version...where parts of the image looked smeared, as though a wet sponge had been dragged across a watercolor marker drawing. NOT the whole image, only parts of it! Never saw anything like it before.
But now, I see that the image doesn't appear at all, and the link to the image doesn't work, either. I'd be happy to edit it so it works, but I 'm curious about why it worked properly for a day or two, and now it doesn't?

Phos±four dots wrote:
When I initially composed and posted the FAQ for the Photoshop/Mac section at the following link...
http://forums.adobe.com/thread/421402?tstart=0
...I coded it to include the full size version of the following image, with the direct link just below it for the benefit of those pesky text-only participants ():
I coded it to display the full-size (492pxW) image because the Jive image-shrinking routine was doing some bizarre distortion to the reduced version...where parts of the image looked smeared, as though a wet sponge had been dragged across a watercolor marker drawing. NOT the whole image, only parts of it! Never saw anything like it before.
But now, I see that the image doesn't appear at all, and the link to the image doesn't work, either. I'd be happy to edit it so it works, but I 'm curious about why it worked properly for a day or two, and now it doesn't?
Phos±,
I'm quoting your post in its entirety in the expectation that your image will sooner or later be replaced by a dead link.
Here's what experience has shown me during the last two weeks in these confounded forums:
If I use the camera icon and then use the "From your Computer" tab, my embedded images stay.
If, on the other hand, I use either the "Uploaded images" or "From the Web" tab, then my embedded images get replaced with a dead link, sometimes within a minute or two, sometimes after a few hours.  Same thing happens with images in quoted posts.

Similar Messages

  • I cannot install iTunes updates as of today.  Does anyone have any idea what changed with iTunes?

    The question apparently needs to be typed in twice...  good work.  Here it is again:
    I cannot install iTunes updates as of today.  Does anyone have any idea what changed with iTunes?

    Is this a distinct issue from the 42404?
    If so, are you getting an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

  • EZ100 16gb what's with this thing????

    %[ Okay, bought one of these the other day to replace my iPod 4gb nano, not that there was anything wrong with it, I just want a new player with bigger storage capacity and I went for the Mozaic EZ00 because Argos were selling it for ?69. So, I get it home, charged it up, updated it to the latest firmware and then piled on the music. This is were it seems to go so wrong!!! I'm not impressed at all with the sound quality of this thing, and I was using my expensi've in ear earphones, also the quality of photos and album art is just atrocious, and this is the killer punch...it just keeps on sticking and skipping during playback of every single track!!! I went into recovery mode, did a disc clean up, even reformatted it and again put the music on only this time it only plays the tracks fine when the unit is locked!!!! So, what's with this thing?? This is my first experience of a Creative product and I fear it may be the last, not impressed, will be taking it back to Argos. Anyone else had similar problems?

    (seasons) greetings all!
    so out of the blue I get a nano for Christmas (it's blue ;-)) and the person who bought it is in windows but new I ran mac.
    unfortunataly he did not know i needed a mac newer than my 3 year old ibook. after years of hearing my boasts of superior macs i hesitate to tell him i cannot use my new gift until i buy a new ibook/macbook... whatever.
    i don't really have a question for this post but just wanted to add my comments. what a scam that to get the latest in a music listening gadget your get sucked into the itunes 7 mandantory hence osx.3 mandantory hence your 3 year old still viable and beloved ibook is impotent.
    can't believe this may force me to buy a new laptop when there is no other reason. mac products should not have a lifetime of just a few years.
    hope everyone else can enjoy their wonderful new mac holiday gifts... i cannot

  • What wrong with this?

    I have a video that has sound, I brought it into afteraffects, made a composition and made some changes. I exported the composition (rendered it) for quick time to edit in photoshop - the video is about 7 minutes.
    Playing the video there is no sound....why?
    Bringing the video into photoshop for editing with content aware fill creates 500+ frames......is that normal?
    also whats the easiest way to move between aftereffects and photoshop in terms of editing frames? can I make changes in photoshop and watch it update in after effects?

    What wrong with this?
    Everything! Sorry, it's simply the most ill-conceived workflow I could imagine.
    Playing the video there is no sound....why?
    http://forums.adobe.com/thread/426347?tstart=0
    Bringing the video into photoshop for editing with content aware fill creates 500+ frames......is that normal?
    Yes. All video editing in PS is limited to 500 or 1000 frames, repsectively. There is no way to extend that range. Read the PS help!
    also whats the easiest way to move between aftereffects and photoshop in terms of editing frames?
    You don't. What you have in mind won't work, anyways. Content Aware Fill only works per frame and has no temporal stabilization, so each frame will have a different pattern and the resulting animation would flicker and wobble.
    can I make changes in photoshop and watch it update in after effects?
    That's what use File --> Reload Footage for or simply close and reopen the project.
    Mylenium

  • CAN ANYBODY TELL ME WHAT WRONG WITH THIS RSS FEED IT WONT WORK

    CAN ANYBONE TELL ME WHATS WRONG WITH THIS FEED BECAUSE IT WONT WORK AND ALSO HOW DO I GET A LINK TO THE PODCAST RSS FEED FOR THE SUBMIT PODCAST PAGE ON ITUNES,
    ANY HELP WILL BE MUCH APRECIATED
    <?xml version="1.0" encoding="UTF-8"?>
    <rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
    <channel>
    <title>DJ Hybrid Coventry Drum n Bass Podcast</title>
    <link>http://www.djhybridcoventry.com/podcast.htm</link>
    <language>en-us</language>
    <copyright>℗ & © 2007 DJ Hybridb& </copyright>
    <itunes:subtitle>DJ Hybrid Drum n Bass Podcast brings you all the latest and greatest from the Drum n Bass scene, updated every two weeks</itunes:subtitle>
    <itunes:author>DJ Hybrid</itunes:author>
    <itunes:summary>The DJ Hybrid Coventry Drum n Bass Podcast will showcase a selection of the latest and greatest tunes that are getting rinsed on the scene, mixed down with sharp cuts and nasty double drops by Dj Hybrid the podcast will also feature other DJ's and Mc's on different shows. Updated every two weeks this is guarenteed to be an original style of drum n bass mashup, for more info check www.djhybridcoventry.com</itunes:summary>
    <description>DJ Hybrid Drum n Bass Podcast brings you all the latest and greatest from the Drum n Bass scene, updated every two weeks</description>
    <itunes:owner>
    <itunes:name>DJ Hybrid</itunes:name>
    <itunes:email>[email protected]</itunes:email>
    </itunes:owner>
    <itunes:image href="http://i100.photobucket.com/albums/m8/djhybrid/PODCASTLOGOBLUE.jpg" />
    <itunes:category text="Music">
    <itunes:category text="Drum n Bass"/>
    </itunes:category>
    <itunes:category text="music"/>
    <item>
    <title>DJ Hybrid Podcast - 1st Show 03/6/07</title>
    <itunes:author>DJ Hybrid</itunes:author>
    <itunes:subtitle>The first show of the new drum n bass podcast from DJ Hybrid</itunes:subtitle>
    <itunes:summary>Welcome to the 1st show from DJ Hybrid because its the first show im goin to play what tunes i think represent me as a DJ aswell as my favourite drum n bass tunes at the moment for tracklistings check www.djhybridcoventry.com</itunes:summary>
    <enclosure url="http://fs06n5.sendspace.com/dl/603942da730253766c5157920e810d3e/46771dd931 3f824d/v3adp4/DJ%20Hybrid%20Podcast%201%20%20-%20%203rd%20June%202007.mp3" length="8727310" type="audio/x-m4a" />
    <guid>http://fs06n5.sendspace.com/dl/603942da730253766c5157920e810d3e/46771dd9313f824d /v3adp4/DJ%20Hybrid%20Podcast%201%20%20-%20%203rd%20June%202007.mp3</guid>
    <pubDate>Sun, 03 Jun 2007 20:00:00 GMT</pubDate>
    <itunes:duration>53:36</itunes:duration>
    <itunes:keywords>DJ, Hybrid, Podcast, Drum, Bass, Jungle, Coventry, Double Drop, Latest, Tunes, Vinyl, Liquid, Rave, Reggae, Urban</itunes:keywords>
    </item>
    </channel>
    </rss>

    First...Stop screaming. It's rude.
    Next...there are some minor problems with your feed. "Drum n Bass" is not a iTunes category. Stick with <itunes:category text="Music" /> remove the others.
    Not required, but recommend to add an <itunes:explicit> tag with a Y or N depending on what suits your podcast. The iTunes staff will remove your feed if it isn't tagged properly.
    MP3 audio files should have a type="audio/mpeg".
    Keep the Podcast spec handy...the categories and other info listed in the spec.
    Test your feed with http://www.feedvalidator.org it will point out problems with your feed.
    The bigger problems stem from your podcast enclosure, specifically the URL.
    The URL you have listed to the podcast mp3 apparently has changed so iTunes can't download the file. It also appears that you are using a "free download" kind of service that uses web page based downloads, which might account for why the URL keeps changing. Don't think that iTunes will be able to properly download the file.
    Erik

  • Whats wrong with this query.can anyone help me......

    select CASE WHEN TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'DDMMYYYY HH24:MM:SS'),13,2))>0 AND TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)) <14
    THEN TO_DATE(CONCAT(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)||'00',SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MI:SS'),16)||'00'),'DD-MM-YYYY HH24:MI:SS') end
    from table;
    i have written this query.whats wrong with this query..........
    the error is "literal does not match format string"
    Reegards soumen

    Why does your date_format loose, ununify and not fix ?
    And what is your exact requirement?
    >>
    CASE WHEN
    TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'DDMMYYYY HH24:MM:SS'),13,2))>0
    AND TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)) <14
    <<
    This is
    CASE WHEN TO_CHAR(START_TIME_TIMESTAMP,'MM') between '01' and '13'
    >>
    THEN TO_DATE(CONCAT(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)
    ||'00',
    SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MI:SS'),16)||'00'),
    'DD-MM-YYYY HH24:MI:SS')
    <<
    This is
    TO_DATE(
    TO_CHAR(START_TIME_TIMESTAMP,'MM"00"SS"00"),
    'DD-MM-YYYY HH24:MI:SS')
    Obviously, format is not matching !
    SQL> select to_char(sysdate,'MM"00"SS"00') from dual;
    TO_CHAR(
    06004900
    SQL> select to_date('06004900','DD-MM-YYYY HH24:MI:SS') from dual;
    select to_date('06004900','DD-MM-YYYY HH24:MI:SS') from dual
    ERROR at line 1:
    ORA-01861: literal does not match format string

  • The PWR MGMT LED on the front panel of the sup720 is off. What happen with this?

    The PWR MGMT LED on the front panel of the standby sup720 is off (But the active engine is on). We check the switch guide which states "The SYSTEM and PWR MGMT LEDs on a redundant supervisor engine or RSP are synchronized to the active module.". What happen with this? Thanks!

    HI @bingxiong.feng,
    This is not a cause for concern as Cisco says in the following link:
    http://www.cisco.com/c/en/us/support/docs/field-notices/200/fn28695.html
    HTH.
    Rgrds,
    Martin, IT Specialist

  • Does ANYONE know whats wrong with this program?!?!

    Hey(again),
    Does anyone know whats wrong with this program?:
    public class FloatingNumbersTest
    public static void main(String args[])
    float float1 =50.0f;
    float closeFloat=0.001f
    float farfloat=100.0f
    if (float1<=closeFloat)
    System.out.print("Float1 pretty close to zero");
    if (float1>=closeFloat)
    System.out.print("Float1 is near 0");
    if (float1>=farfloat)
    System.out.print("Float1 is not even close to zero!"0
    }There has seemed to be 5 errors!

    public class FloatingNumbersTest
    public static void main(String args[])
    float float1 =50.0f;
    float closeFloat=0.001f
    float farfloat=100.0f
    if (float1<=closeFloat)
    HERE        System.out.print("Float1 pretty close to zero");
    if (float1>=closeFloat)
    System.out.print("Float1 is near 0");
    if (float1>=farfloat)
    System.out.print("Float1 is not even close to zero!"0
    }you're missing the opening { for the first if.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • TS4062 For some reason my Ipod will not connect to Itunes store nor will it sync.whats up with this?

    For some reason my IPOD touch will not connect with the Itunes store nor will it sync with my PC. Whats up with this?

    How To Fix 0×80090318 and related errors – Windows 7, XP & Vista
    Also Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Contest: Guess whats wrong with this code!

    Can you guess whats wrong with this code snippet? Perhaps its too easy...
    private void clearDefaultTableModel( DefaultTableModel dtm) {    
            int  rowCount  = dtm.getRowCount();
            for(int i =0;  i < rowCount; i++) {
                dtm.removeRow(i);  
        }- Karl XII

    Can you guess whats wrong with this code snippet?
    Perhaps its too easy...
    private void clearDefaultTableModel(
    DefaultTableModel dtm) {    
    int  rowCount  = dtm.getRowCount();
    for(int i =0;  i < rowCount; i++) {
    dtm.removeRow(i);  
    it should be
    private void clearDefaultTableModel(DefaultTableModel dtm) {    
       int  rowCount  = dtm.getRowCount();
       for(int i =0;  i < rowCount; i++) {
         dtm.removeRow(0);  
    }or another way
    private void clearDefaultTableModel(DefaultTableModel dtm) {    
      while(dtm.getRowCount()>0){
         dtm.removeRow(0);  

  • What's with this "stay connected" pop up message?

    Hi all,
    I just got a new G5 Intel iMac and have had great success transfering all of my setting and data from my old g4 iMac via the Migration Assistant and Target Disk Mode to the new machine. No problems at all. It was a breeze!
    However, now that the new machine is up and running I periodically get this message: "This is your reminder that your connection is still active. Do you wish to remain connected?" Then it offers two buttons: " Disconnect" and "Stay connected" I remember that with an older version of OS 10, either Panther or Jaguar, I would get such messages but there was a System Preferences panel in which you could shut this message off and stay permanently online without having to hang around during long downloads and punching the "Stay connected" button. This message never appeared on the old G4 iMac even though I was running the very same version of Tiger (10.4.8) on it that I now have on the new iMac. Apparently the setting to turn off this message didn't transfer over and, what's worse, there is nowhere I can find in the Tiger System Preferences where I can shut it off.
    Does anyone know how to do this?
    Thanks everyone.
    Rick

    Hi Steve,
    Thanks for the quick response! I looked at the "about this Mac" in the Apple menu and here's what it states:
    "2 GHz Intel Core 2 Duo"
    I tell you this because I originally posted this question in the iMac G5 forum and they told me to post it over here in the Intel Mac forum. I'm starting to get even more confused.
    Also, I looked again at the Network setting in System Preferences and there is no PPP or Options choice anywhere. Instead it just tells me this:
    "Built-in Ethernet is set up to use PPPoE." and "You are connected to the internet via Built-in Ethernet."
    And I am indeed connected via the ethernet port to a DSL modem. I do remember in previous versions of OS 10 doing exactly what you suggested in your post to get that blasted pop-up message to stop annoying me and, like you said, "Problem [was] gone". This message never bothered me on my old iMac g4 (which was a power PC Mac) but now, maybe because of this new chip it's baaaaaack So with this further information do you have any other ideas?
    Thanks again,
    Rick

  • What changed with sleep between 10.8 and 10.9?

    Prior to Mavericks, sleep mode made sense to me. Hit the button and my iMac went to sleep almost right away. Hit the button again or hit a key on my keyboard and it would wake up almost right away, too. In between those two events, the machine would stay asleep.
    WIth Mavericks, sleep seems to me to be baffling, random, and inscrutable. I cannot make any sense of how it works. The button puts the machine to sleep only if you're logged in. At the login screen you can only click on "Sleep" with the mouse. When you put the machine to sleep it can take several seconds, sometimes almost a minute, before it actually goes to sleep. (It also takes mystifyingly long for logout to complete.) Once the machine is asleep, it can wake up again without me doing anything, sometimes after after only a couple of seconds, other times sometime overnight.
    I have searched around for what is going on, and most of the information I find talks about the reasons why OS X might wake up. That is not my question. My question is: What changed between 10.8 and 10.9 with regard to sleep? I didn't change any settings at all when I upgraded from 10.8 to 10.9, so why did the behavior change (and for the worse, I might add)? Why do I need to go review the half dozen or so settings that are possible causes for spontaneous wake? I had them set the way I like in 10.8. Is there official Apple documentation about how sleep is supposed to behave in Mavericks?
    Thank you for any help you can give me.

    This is always due to a process keeping the system awake, but determining which is the challenge.
    A first simple step is to create a new, temporary user account. Log out of yours and log into the temporary one. Determine if it sleeps then. If it does then you have a login item that is preventing sleep. System Preferences > Users & Groups > Login Items.
    Whenever you suspect a problem related to power, including sleep, an SMC reset is also recommended.
    Active Spotlight indexing will prevent sleep. Wait for it to complete.
    Check your Sharing preferences for anything that could permit an active network connection.
    Energy Saver "Wake for network access" can prevent sleep, but unchecking it will prevent the ability to remotely access a sleeping Mac over a network.
    A normally functioning Mac will sleep according to Energy Saver, but will wake periodically for network access, after which it will return to sleep according to the settings in Energy Saver.
    Check Energy Saver > Power Nap. Whatever its setting happens to be, change it. Power Nap itself does not prevent sleep, but a corrupted Power Nap setting might. Changing its setting might correct it.
    Unfinished print jobs will prevent sleep. If a print job is queued, but if the printer is off or the connection to it is lost, the Mac will stay awake forever waiting for the printer to return.
    Safari pages that periodically refresh themselves are very common. This will prevent sleep.
    Frequently checking for new mail may prevent sleep. Change Mail's preferences to check for new mail less frequently.
    iTunes and iPhoto sharing will prevent sleep.
    Active Bluetooth devices will prevent sleep.
    Active USB or Thunderbolt devices will prevent sleep. Disconnect them to help isolate the cause.
    Using Time Machine over a network may prevent sleep. Time Machine using a Time Capsule will not.
    There are plenty of third party utilities designed to prevent sleep. One may not have been completely uninstalled.
    Quit the process with the name powerd in Activity Monitor. It will re-launch on its own.
    Any number of "anti-virus" utilities can prevent sleep, along with other miseries. Get rid of them.
    ... Is there official Apple documentation about how sleep is supposed to behave in Mavericks?
    Read Mac OS X: Why your Mac might not sleep or stay in sleep mode

  • What changed with create from clipboard?

    Hi guys. Sorry if I do not sound technical on this but something has occured which might be how mavericks handles clip board contents now or photoshop.
    In illustrator I might create something that I copy then in photoshop, create new from clipboard. It used to be if I set a highish resolution the resultant vector paste would be nice and large, for arguments sake I might have a full sfreen zoomed to 50%
    Now when copying and crating from clip board even on high resolutions the size of the image is always the same, from A4 barley 500 pixels wide. which when experoting for a web or what ever makes it very small.
    As I say I am not technical and do understand there are differences between resolution, pixels, dpi etc etc, but never the less something changed with CC or mavericks and I prefered how it was before!
    Any ideas?

    Somebody mentioned a bug along those lines just recently.  I don't know for sure it is the same issue, but it sounded just like that.

  • HELP PLEASE - WHATS WRONG WITH THIS CODE

    Hi. I get this message coming up when I try to compile the code,
    run:
    java.lang.NullPointerException
    at sumcalculator.SumNumbers.<init>(SumNumbers.java:34)
    at sumcalculator.SumNumbers.main(SumNumbers.java:93)
    Exception in thread "main"
    Java Result: 1
    BUILD SUCCESSFUL (total time: 2 seconds)
    I am not sure whats wrong with the code. Any assistance would be nice. The code is below.
    package sumcalculator;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class SumNumbers extends JFrame implements FocusListener {
    JTextField value1;
    JTextField value2;
    JLabel equals;
    JTextField sum;
    JButton add;
    JButton minus;
    JButton divide;
    JButton multiply;
    JLabel operation;
    public SumNumbers() {
    SumNumbersLayout customLayout = new SumNumbersLayout();
    getContentPane().setFont(new Font("Helvetica", Font.PLAIN, 12));
    getContentPane().setLayout(customLayout);
    value1.addFocusListener(this);
    value2.addFocusListener(this);
    sum.setEditable(true);
    value1 = new JTextField("");
    getContentPane().add(value1);
    value2 = new JTextField("");
    getContentPane().add(value2);
    equals = new JLabel("label_1");
    getContentPane().add(equals);
    sum = new JTextField("");
    getContentPane().add(sum);
    add = new JButton("+");
    getContentPane().add(add);
    minus = new JButton("-");
    getContentPane().add(minus);
    divide = new JButton("/");
    getContentPane().add(divide);
    multiply = new JButton("*");
    getContentPane().add(multiply);
    operation = new JLabel();
    getContentPane().add(operation);
    setSize(getPreferredSize());
    addWindowListener(new WindowAdapter() {
    public void windowClosing(WindowEvent e) {
    System.exit(0);
    public void focusGained(FocusEvent event){
    try {
    float total = Float.parseFloat(value1.getText()) +
    Float.parseFloat(value2.getText());
    sum.setText("" + total);
    } catch (NumberFormatException nfe) {
    value1.setText("0");
    value2.setText("0");
    sum.setText("0");
    public void focusLost(FocusEvent event){
    focusGained(event);
    public static void main(String args[]) {
    SumNumbers window = new SumNumbers();
    window.setTitle("SumNumbers");
    window.pack();
    window.show();
    class SumNumbersLayout implements LayoutManager {
    public SumNumbersLayout() {
    public void addLayoutComponent(String name, Component comp) {
    public void removeLayoutComponent(Component comp) {
    public Dimension preferredLayoutSize(Container parent) {
    Dimension dim = new Dimension(0, 0);
    Insets insets = parent.getInsets();
    dim.width = 711 + insets.left + insets.right;
    dim.height = 240 + insets.top + insets.bottom;
    return dim;
    public Dimension minimumLayoutSize(Container parent) {
    Dimension dim = new Dimension(0, 0);
    return dim;
    public void layoutContainer(Container parent) {
    Insets insets = parent.getInsets();
    Component c;
    c = parent.getComponent(0);
    if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+48,128,40);}
    c = parent.getComponent(1);
    if (c.isVisible()) {c.setBounds(insets.left+256,insets.top+48,128,40);}
    c = parent.getComponent(2);
    if (c.isVisible()) {c.setBounds(insets.left+408,insets.top+48,56,40);}
    c = parent.getComponent(3);
    if (c.isVisible()) {c.setBounds(insets.left+488,insets.top+48,152,40);}
    c = parent.getComponent(4);
    if (c.isVisible()) {c.setBounds(insets.left+128,insets.top+136,72,40);}
    c = parent.getComponent(5);
    if (c.isVisible()) {c.setBounds(insets.left+248,insets.top+136,72,40);}
    c = parent.getComponent(6);
    if (c.isVisible()) {c.setBounds(insets.left+368,insets.top+136,72,40);}
    c = parent.getComponent(7);
    if (c.isVisible()) {c.setBounds(insets.left+488,insets.top+136,72,40);}
    c = parent.getComponent(8);
    if (c.isVisible()) {c.setBounds(insets.left+176,insets.top+48,56,40);}
    }

    Thank you. How do i amend this? I have defined value1though.Yes, you did - but after the call to addFocusListener(...). It needs to be before it.
    BTW, you did the same thing with "value2.addFocusListener(this)" and "sum.setEditable(true)" on the next two lines. You're attempting to call a method on an object that doesn't exist yet (i.e., you haven't called new yet).

  • Whats wrong with this sql statement ??

    Hello all, I am trying to run the below query out of persheet(tanel poder) performance excel chart...but i get below error...db is on 9.2
    what is wrong with this sql statement ?
    http://blog.tanelpoder.com/2008/12/28/performance-visualization-made-easy-perfsheet-20-beta/
    select * from (
    with fsq as (
      select /*+ materialize */
       i.dbid
        , i.instance_name
        , i.instance_number
    --    , trunc(s.snap_time, 'DD')     DAY
    --    , to_number(to_char(s.snap_time, 'HH24'))  HOUR
    --   -- , to_char(s.snap_time, 'MI')    MINUTE
    --    , 0           MINUTE
        , trunc(
          lag(s.snap_time, 1)
          over(
           partition by
          v.dbid
           , i.instance_name
           , v.instance_number
           , v.event
         order by
          s.snap_time
          , 'HH24'
         )           SNAP_TIME
        , v.event_type        EVENT_TYPE
        , v.event          EVENT_NAME
        , nvl(
        decode(
         greatest(
          time_waited_micro,
          nvl(
           lag(time_waited_micro,1,0)
           over(
            partition by
             v.dbid
              , i.instance_name
              , v.instance_number
              , v.event
            order by v.snap_id
           , time_waited_micro
         time_waited_micro,
         time_waited_micro - lag(time_waited_micro,1,0)
         over (
          partition by
           v.dbid
            , i.instance_name
            , v.instance_number
            , v.event
          order by v.snap_id
         time_waited_micro
           , time_waited_micro
         ) / 1000000         SECONDS_SPENT
        , total_waits         WAIT_COUNT
      from
       (select distinct dbid, instance_name, instance_number from stats$database_instance) i
        , stats$snapshot s
        , ( select
         snap_id, dbid, instance_number, 'WAIT' event_type, event, time_waited_micro, total_waits
        from
         stats$system_event
        where
         event not in (select event from stats$idle_event)
        union all
        select
         snap_id, dbid, instance_number,
         case
          when name in ('CPU used by this session', 'parse time cpu', 'recursive cpu usage') then 'CPU'
          when name like 'OS % time' then 'OS'
          else 'STAT'
         end,
         name , value, 1
        from
         stats$sysstat
    --    where      name in ('CPU used by this session', 'parse time cpu', 'recursive cpu usage')
    --    or  name like('OS % time')
    --    or 1 = 2 -- this will be a bind variable controlling whether all stats need to be returned
       ) v
      where
       i.dbid = s.dbid
      and i.dbid = v.dbid
      and s.dbid = v.dbid
      and s.snap_id = v.snap_id
      and s.snap_time between '%FROM_DATE%' and '%TO_DATE%'
      and i.instance_name = '%INSTANCE%'
    select * from (
      select
       instance_name
        , instance_number
        , snap_time
        , trunc(snap_time, 'DD')  DAY
        , to_char(snap_time, 'HH24') HOUR
        , to_char(snap_time, 'MI') MINUTE      
        , event_type  
        , event_name  
        , seconds_spent
        , wait_count  
        , ratio_to_report(seconds_spent) over (
    --      partition by (to_char(day, 'YYYYMMDD')||to_char(hour,'09')||to_char(minute, '09'))
          partition by (snap_time)
          ) ratio
      from fsq
      where
       snap_time is not null -- lag(s.snap_time, 1) function above will leave time NULL for first snapshot
      -- to_char(day, 'YYYYMMDD')||to_char(hour,'09')||to_char(minute, '09')
      -- > ( select min(to_char(day, 'YYYYMMDD')||to_char(hour,'09')||to_char(minute, '09')) from fsq)
    where ratio > 0
    order by
        instance_name
      , instance_number
      , day
      , hour
      , minute
      , event_type
      , seconds_spent desc
      , wait_count desc
    Error at line 6
    ORA-00604: error occurred at recursive SQL level 1
    ORA-00972: identifier is too long

    Hi Alex,
    Subquery factoring a.k.a. the with-clause should be possible on 9.2:
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_103a.htm#2075888
    (used it myself as well on 9.2)
    @OP
    I recall having problems myself using PL/SQL Developer and trying to get the with clause to work on 9.2 some years ago.
    A workaround might be to create a view based on the query.
    Also, your error message is "ORA-00972: identifier is too long"...
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e900.htm#sthref419
    Can't test things currently, no 9.2 available at the moment, but perhaps tomorrow I'll have a chance.

Maybe you are looking for