Admission audit - manual override of audit results

Hello -
Not sure if this is a config issue on our side or an SAP issue. When the users use the GUI to manually override a particular requirement from the original audit results  ex:  from 'not met' to 'irrelevant' and save, it works.  However, as soon as an audit is executed again (which we want it to do a lot in case that last piece completes it) the manual overrides are wiped out and the original results are returned. 
Did any one else have this issue?  If yes, how did you fix it?  Is there a way to keep our manual overrides?  We followed the audit cookbook for our config. 
thanks,
Denise

Hi Denise,
As Prabhat said this is the design of the framework, it checkes rules during the assessment run and is used as a bases to decide if there is a pass or fail on the rules. There is no hidden IMG entry to enable the overriding elements in the admission audit. This only works if you are intending to approve the admission directly after you override a rule (first save before you approve!).
We also encounter this requirement at Dutch universities and the need for manual override of rules too. There we used an automatic admission audit assessment run during the night which manual overriden the rules (got back to 'red' again, hence fail).
We 'solved' this by conducting a thorough investigation on the rules (content) and a re-design of rules to make them more rigid
OR more flexible. Plus for rules which really needed override capabilities we created a seperate tab in the Student File which provided the flexibility to overrride particular rules per open admission.
Due to this minor development effort we could keep the standard strenghts of the audt framework and we provide flexibility or overriding rules
br
Rob

Similar Messages

  • Manual override option for Unit selling price in Order line level.

    In OM R-12
    Our client wants manual override option for Unit selling price in Order line level.
    But there is no solution available to fulfill this requirment. To be able to manually override the price on a Sales Order line you
    must have defined a manual modifier that qualifies for the Sales Order line in question. Without a suitable manual modifier the price cannot be changed.
    This is current standard functionality.
    Anybody can give some suggestion/workaround to override selling price in Order header level without using the modifiers.
    regards,

    Hi Kashif,
    I'm finding it little difficult to buy Oracle Support's feedback with regards to R12 functionality for direct List Price update without using any modifier (manual or whatever). After all it is Oracle's product and they should know better. But test results in Solution Beacon's Vision 12.0.6 instance (http://www.solutionbeacon.com/tools_r12vision.htm) and documentation updates in R12 (R12.0.4) OM user guide & implementation manuals potray a different picture.
    After your last post, I did a test in Solution Beacon's Vision 12.0.6 instance with following details:
    OM: List Price Override Privilege = "Unlimited Access" at user level
    OM: Discounting Privileges = "None" at user level
    No manual modifiers defined and Order status = "Entered"
    I could display the "List Price" field from folder under Line Items >> Main tab, override the list price to a new value and save. The unit selling price showed the new value based on updated List Price as soon as I tabbed out of the list price field after overriding. After saving it showed the new selling price. _Please note that under Line Items >> Pricing tab there is another "List Price" field and that is not editable_. For such overrides "View Adjustments" (from Line >> Actions) will not show any adjustment details as it is a direct update of list price.
    Also please note that, if "Enforce List Price" checkbox is selected for the order type, the list price cannot be overridden even if the profile option is set to "Unlimited Access".
    Document References:
    Oracle® Order Management User's Guide
    Release 12, Part No. B28099-03, September 2007 >> R12.0.4
    Page No. 10-74
    +Note: Note: If any order line for an order has the Calculate Price Flag value equal to Partial Price or Freeze Price new order level adjustments will not be applied or allowed to be overridden. _The profile option OM: List Price Override  Privilege controls your ability to override the unit list price. If you have this profile set to Unlimited, you may modify the unit list price by editing the current value displayed_. The original list price is saved in a hidden folder field, so you can display it if necessary+.
    Page No. 10-94
    User Procedures
    _A new profile option, OM: List Price Override Privilege controls whether or not you can update the List Price_. It is enabled and updated at the application, responsibility and user level. It is not user visible and updatable. The values include+:
    - View Only: This is the default value. If set to this value, the current behavior is retained, which means unit list price field is protected.
    - Unlimited Privilege: If set to this value, you can override the unit list price field from the main tab and immediately see selling price adjusted accordingly.
    To use Override List Price:
    +1. Navigate to the Sales Orders/Quick Sales Orders window.+
    +2. Enter the header and line information, including the ordered item and quantity, then tab to the next field. The Selling Price and List Price display+.
    +3. If the profile is set to Unlimited Privilege, you can enter a new list price in the List Price field. You can either proceed to the next line or save your work+.
    +4. You can see the new, entered list price, and if there are automatic discounts applied, they will be based on the new list price+.
    +5. If the folder has been modified to show the Original List Price, the original list price displays+.
    +6. To change the List Price again, go to the list price field and enter a new value, replacing a previously entered value. If Audit Trail is enabled for List Price and a reason is required, a window appears to enter a reason and optional comments+.
    Note: Subsequent overrides of the List Price, after the order line is saved, can be captured by Audit Trail, depending on the setup of Audit Trail (entered or booked state) and any processing constraints that have been set up.
    In the OM Implementation Manual also there are notes related to this.
    OM Implementation Manual
    Release 12, Part No. B25975-03, September 2007 >> R12.0.4
    You can refer to page no. 2-59, C-4 etc.
    Thanks
    Supro

  • Need to manually override vbup-lfsta for fully invoiced order

    We have two sales orders in production that have been fully invoiced, but due to an old bug in our shipping point determination logic, the shipping point was accidentally cleared in the sales order, thereby showing it as incomplete (which is correct).    Because these documents have fully delivered and invoiced, we cannot update the shipping point but need a way to manually change VBUP-LFSTA from A to C (something similar to VL_complete, but for a sales order).      I am basically looking for the OPPOSITE of program SDVBUK00, which corrects incorrect VBUP and VBUK settings.     I need to manually override the settings since these are very old documents, cannot be reversed, rejected or changed and are not needed to show on the incomplete orders report because they were shipped and billed.
    Thank you in advance for your time!
    Regina
    Edited by: Regina DeMita on May 13, 2010 4:59 PM

    Hello Regina
    I have the following suggestions for you.
    1) The only way these docs may be bothering you is by showing up on the incomplete orders report. If you eliminate them in that report,  then you should be fine I guess. So my workaround is use Tcode V_ UC and create a variant excluding these 2 documents from the list (using the Sales Document field in the General doc data section and the option to exclude single values) and make this variant the default for all users.
    2) Use Z-code to change the status. See OSS notes 1177165 and 617501, the second one particularly because it has Document # in the selection criteria. They are meant to correct the Revenue Recognition status of sales documents and may be you can copy and adapt one of them to suit your situation. Or best ask SAP to provide one as they have done program from note 1177165 based on customer request.
    Hope this helps.

  • Enterprise Mode site list and manual override

    I have a small question / issue when using Enterprise Mode.
    We have enabled it using GPO by specifying both a site list and the Enable settings for manual override. This works fine but I don't know how to reset the manual override if somebody flicks the EM mode for a specific site.
    I just want to tell IE to forget all manual overrides and apply the sitelist as delivered.
    I tried to look in the registry, in the %AppData% fodler, even cleared the IE cache but IE still remembers the user overrides.
    Any help will be really appreciated.
    Thanks, Nic.

    Hi Nic,
    As the official documents said, this registry key [HKEY_LOCAL_MACHINE\SOFTWARE\ Policies\Microsoft\Internet Explorer\Main\EnterpriseMode] “Enable” = “” | {URL:port} can also be used to collect manual overrides. By configuring the “Enable” key with a
    valid URL and port, Internet Explorer will initiate a simple POST to the supplied address whenever a user enables or disables Enterprise Mode. This effectively helps customers crowd-source lists of compatible Web apps from their own users, which may decrease
    triage and testing costs.
    Approximately 65 seconds after Internet Explorer 11 starts, it looks for a properly formatted site list. If a new site list is found, with a different version number than the active list, Internet Explorer 11 loads and uses the newer version.
    This is designed by default, and we cannot reset the by preventing the changes.
    We may try to logon script to re-deploy the original site list to reset the site list settings.
    Kate Li
    TechNet Community Support

  • Value - based Auditing vs. Continuous Auditing

    Hi, I just learned about auditing in Oracle. Can anyone help, what is the difference between value - based auditing and continuous auditing?
    Thanks in advance

    KyroolYoung wrote:
    Hi, I just learned about auditing in Oracle. Can anyone help, what is the difference between value - based auditing and continuous auditing?
    Value based auditing is actually to capture the changes done over the actual values and is done using triggers . Using trigger's old and new keywords, one can capture the value changes and push them to a table for the record.
    I have never heard about something called continuous auditing. May be you meant the standard auditing which is essentially to capture the statement type being executed. This kind of auditing merely would tell you that these many number of DML's(for example) got executed over the table.
    HTH
    Aman....

  • Strange New Console Messages _spotlight: audit warning: expired /var/audit/ {string of numbers}

    For several days I have been having difficulties having the MacBook Pro (Lion) complete shutdowns. Eventually I have to hard reset it.
    On reboot almost always Spotlight starts building its index again. (I even gave it 2 full days once in case the indexing not completing was the issue but the laptop had just stayed hung). Disk Utility and even the otherwise pathetic Tech Tools Pro 6 report no errors in directories or structures,
    Today, I just noticed a strange new series of messages, while I was not using the computer all day and no apps were running....
    They are shown below (I narrowed the search to Spotlight in Console)
    1/2/12 10:41:27.008 AM SystemUIServer: /SourceCache/SpotlightUI/Spotlight-627.20/menu/Models/MDQueryWorker.m __+[MDQueryWorker startQuery:withOptions:]_block_invoke_1 Can't execute query '(* = "phon*"cdw || kMDItemTextContent = "phon*"cdw)': Device not configured
    1/2/12 8:47:36.476 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/2/12 9:47:38.467 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/2/12 10:47:34.807 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/2/12 11:47:35.295 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 12:47:34.539 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 1:47:34.667 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 2:47:35.032 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 3:47:34.591 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 4:47:35.409 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 5:47:35.105 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 6:47:35.180 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 7:47:36.245 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 8:47:35.742 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 9:47:35.213 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 10:41:10.965 AM _spotlight: audit warning: closefile /var/audit/20120103085828.20120103154110
    1/3/12 10:41:10.988 AM _spotlight: audit warning: expired /var/audit/20111212030845.20111212031014
    1/3/12 10:41:10.999 AM _spotlight: audit warning: expired /var/audit/20111213155825.20111213161344
    1/3/12 10:41:11.000 AM _spotlight: audit warning: expired /var/audit/20111212102108.20111213154106
    1/3/12 10:41:11.038 AM _spotlight: audit warning: expired /var/audit/20111213161413.crash_recovery
    1/3/12 10:41:11.039 AM _spotlight: audit warning: expired /var/audit/20111215005701.crash_recovery
    1/3/12 10:41:11.039 AM _spotlight: audit warning: expired /var/audit/20111214002110.20111215005627
    1/3/12 10:41:11.039 AM _spotlight: audit warning: expired /var/audit/20111213235632.20111214001848
    1/3/12 10:41:11.042 AM _spotlight: audit warning: expired /var/audit/20111215010125.20111215144053
    1/3/12 10:47:35.648 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 11:47:36.445 AM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 12:47:36.145 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 1:47:35.532 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 2:47:36.216 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 3:47:35.993 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    1/3/12 4:47:35.945 PM mds: ERROR: _MDSChannelInitForAFP: AFPSendSpotLightRPC failed -1
    The following all occurred in a row. Only ongoing activity I can recall is that a Time Machine hourly update completed successfully.
    1/3/12 5:23:41.880 PM _spotlight: audit warning: closefile /var/audit/20120103154110.20120103222341
    1/3/12 5:23:41.977 PM _spotlight: audit warning: expired /var/audit/20111215144053.20111216050915
    1/3/12 5:23:42.000 PM _spotlight: audit warning: expired /var/audit/20111216051546.crash_recovery
    1/3/12 5:23:42.004 PM _spotlight: audit warning: expired /var/audit/20111216052146.20111216085704
    1/3/12 5:23:42.034 PM _spotlight: audit warning: expired /var/audit/20111216085704.20111216085842
    1/3/12 5:23:42.040 PM _spotlight: audit warning: expired /var/audit/20111216085842.20111216090207
    1/3/12 5:23:42.043 PM _spotlight: audit warning: expired /var/audit/20111216090409.20111216090706
    1/3/12 5:23:42.043 PM _spotlight: audit warning: expired /var/audit/20111216090207.20111216090409
    1/3/12 5:23:42.045 PM _spotlight: audit warning: expired /var/audit/20111216090706.20111216092708
    1/3/12 5:23:42.057 PM _spotlight: audit warning: expired /var/audit/20111216092708.20111216093022
    1/3/12 5:23:42.060 PM _spotlight: audit warning: expired /var/audit/20111216093022.20111216093207
    1/3/12 5:23:42.071 PM _spotlight: audit warning: expired /var/audit/20111216093420.20111216093709
    1/3/12 5:23:42.072 PM _spotlight: audit warning: expired /var/audit/20111216093709.20111216094209
    1/3/12 5:23:42.073 PM _spotlight: audit warning: expired /var/audit/20111216093207.20111216093420
    1/3/12 5:23:42.075 PM _spotlight: audit warning: expired /var/audit/20111216094209.20111216094709
    1/3/12 5:23:42.089 PM _spotlight: audit warning: expired /var/audit/20111216100711.20111216100800
    1/3/12 5:23:42.102 PM _spotlight: audit warning: expired /var/audit/20111216095710.20111216100211
    1/3/12 5:23:42.107 PM _spotlight: audit warning: expired /var/audit/20111216095209.20111216095710
    1/3/12 5:23:42.107 PM _spotlight: audit warning: expired /var/audit/20111216094709.20111216095209
    1/3/12 5:23:42.107 PM _spotlight: audit warning: expired /var/audit/20111216100211.20111216100711
    1/3/12 5:23:42.130 PM _spotlight: audit warning: expired /var/audit/20111216101212.20111216101712
    1/3/12 5:23:42.140 PM _spotlight: audit warning: expired /var/audit/20111216100800.20111216101212
    1/3/12 5:23:42.140 PM _spotlight: audit warning: expired /var/audit/20111216102358.20111216102633
    1/3/12 5:23:42.141 PM _spotlight: audit warning: expired /var/audit/20111216102213.20111216102358
    1/3/12 5:23:42.156 PM _spotlight: audit warning: expired /var/audit/20111216101712.20111216102213
    1/3/12 5:23:42.156 PM _spotlight: audit warning: expired /var/audit/20111216102633.20111216102713
    1/3/12 5:23:42.188 PM _spotlight: audit warning: expired /var/audit/20111216103248.20111216103414
    1/3/12 5:23:42.189 PM _spotlight: audit warning: expired /var/audit/20111216102713.20111216103213
    1/3/12 5:23:42.194 PM _spotlight: audit warning: expired /var/audit/20111216103213.20111216103248
    1/3/12 5:23:42.196 PM _spotlight: audit warning: expired /var/audit/20111216103714.20111216103843
    1/3/12 5:23:42.197 PM _spotlight: audit warning: expired /var/audit/20111216103414.20111216103502
    1/3/12 5:23:42.201 PM _spotlight: audit warning: expired /var/audit/20111216103502.20111216103714
    1/3/12 5:23:42.202 PM _spotlight: audit warning: expired /var/audit/20111216103843.20111216104214
    1/3/12 5:23:42.205 PM _spotlight: audit warning: expired /var/audit/20111216104214.20111216104714
    1/3/12 5:23:42.217 PM _spotlight: audit warning: expired /var/audit/20111216104714.20111216105215
    1/3/12 5:23:42.228 PM _spotlight: audit warning: expired /var/audit/20111216105215.20111216115220
    1/3/12 5:23:42.228 PM _spotlight: audit warning: expired /var/audit/20111216115720.20111216193003
    1/3/12 5:23:42.230 PM _spotlight: audit warning: expired /var/audit/20111216115220.20111216115720
    1/3/12 5:23:42.236 PM _spotlight: audit warning: expired /var/audit/20111216193003.20111216193503
    1/3/12 5:23:42.241 PM _spotlight: audit warning: expired /var/audit/20111216193503.20111216193602
    1/3/12 5:23:42.248 PM _spotlight: audit warning: expired /var/audit/20111216193602.20111216200004
    1/3/12 5:23:42.262 PM _spotlight: audit warning: expired /var/audit/20111216200004.20111216200505
    1/3/12 5:23:42.262 PM _spotlight: audit warning: expired /var/audit/20111216200505.20111216201005
    1/3/12 5:23:42.265 PM _spotlight: audit warning: expired /var/audit/20111217183803.20111217183833
    1/3/12 5:23:42.265 PM _spotlight: audit warning: expired /var/audit/20111216201005.20111217183803
    1/3/12 5:23:42.283 PM _spotlight: audit warning: expired /var/audit/20111217223900.20111217223930
    1/3/12 5:23:42.288 PM _spotlight: audit warning: expired /var/audit/20111217183833.20111217183903
    1/3/12 5:23:42.289 PM _spotlight: audit warning: expired /var/audit/20111217183903.20111217223900
    1/3/12 5:23:42.293 PM _spotlight: audit warning: expired /var/audit/20111217224000.crash_recovery
    1/3/12 5:23:42.294 PM _spotlight: audit warning: expired /var/audit/20111217223930.20111217224000
    Any thoughts on what these are all about and how to get rid of these problems?
    Thanks and Happy New Year.
    Imran

    To the best of my knowledge, the CaptiveNetworkSupport daemon has to do with WiFi and networking.
    Some things to try:
    Visit ~/Library/Caches <–Trash everything in this folder (it will rebuild after reboot)
    Reboot your Mac. | Empty the Trash. | Reboot your Mac.
    You cannot empty the trash until after you reboot because the files are still in use. When you reboot the second time, after you have emptied the trash, it is to ensure that none of the files are in use, and the new caches are rebuilt successfully.  You may notice it's a little slow at first, that is because it is rebuilding the caches.
    Rebuild the Spotlight Index.
    This is simple. Open up Spotlight in System Prefs, drag your Mac HD into the Privacy section, then remove it. It rebuilds the spotlight database.
    Repair Disk Permissions for good measure as well.
    See if that helps anything.

  • Manual override

    Could there be provision for manual override ?
    I can override body/lens.
    I'd like to be able to check correction
    for variable aperture/focal length.
    ( I have a bunch of scans and it would be great
    to adjust the parameters to the best fit)

    I am not sure I understand your request. In PS CS5, from the LC filter dialog, you can select a profile, right-click (windows) or Ctrl+click, you can access the cloest subprofiles present in the currectly selected lens profiles. There you can manually override the default subprofile selection. The functionality is not available in ACR. I am not sure if this is what you are asking for.

  • Error while trying to start Audit Collector on the Audit Vault Server 10g

    Hi,
    We are trying to build a demo environment for testing Oracle Audit Vault 10g but we are having some trouble.
    Our environment is like this: Oracle Audit Vault Server is installed on Windows Server 2003 SP2, while the Audit Vault Agent is installed on an Oracle 10g Release 2 database which resided on Windows server 2003 SP1. This two Windows Server machines are both installed as virtual machines.
    We have successfully created the Agent and the Collector on Audit Vault Server and the Agent starts successfully while when we try to start the collector we get an error which says " Http Communication error: Http Communication error: 500" and the collector does not start.
    We are new to the Audit Vault Software so we would really appreciate some help on how to resolve this issue because we have got stuck here and can not go on with our work.
    Thanks in advance for your time
    Best regards
    Engrid

    Hi,
    Thanks again for all of your replies but now we are getting another error with the OSAUD collector. We are able to add the collector successfully by using the avorcldb all_collector command.
    Source database is 10g R2 (10.2.1) and we configured it for collecting the audit records in the OS audit trail by using the following statement: ALTER SYSTEM SET AUDIT_TRAIL=OS SCOPE=SPFILE;, and the SHOW PARAMETER AUDIT command returns the following values :
    NAME TYPE VALUE
    audit_file_dest string C:\ORACLE\PRODUCT\10.2.0\ADMIN
    \<db_name>\ADUMP
    audit_sys_operations boolean TRUE
    audit_trail string OS
    We don't know if the values set for the audit_file_dest is correct but after we start working on the database and execute some statements Oracle is not creating any files on this destinations while for the same statements when the Audit_trail=DB, EXTENDED the audit values for these statements are written in the appropriate table.
    So we do not know if this is the cause but when we try to start the OSAUD collector defined on the Audit Vault Server it can not start and gives us the follwing error: "could not start collector OSAUD_Collector for source <source name>, directory access error for C:\ORACLE\PRODUCT\10.2.0\ADMIN\<db_name>\ADUMP".
    Sorry for the message being so long but we really need some help with this issue.
    thanks in advance.
    Engrid

  • How to check audit setting and read audit data?

    I enable auditing for ase and then check information for sysaudits_xx table like:
    select * from sysaudits_02 order by eventtime desc
    and got same data like:
    event
    eventmod
    spid
    eventtime
    sequence
    suid
    dbid
    objid
    xactid
    loginname
    dbname
    objname
    objowner
    extrainfo
    16
    45
    1
    130
    05/15/2014 1:49:03.353 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    17
    45
    1
    170
    05/15/2014 1:49:03.320 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    18
    45
    1
    84
    05/15/2014 1:49:03.283 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    19
    45
    1
    82
    05/15/2014 1:49:03.243 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    20
    45
    1
    141
    05/15/2014 1:49:03.210 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    21
    45
    1
    80
    05/15/2014 1:49:03.170 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    22
    45
    1
    71
    05/15/2014 1:49:03.133 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    23
    45
    1
    52
    05/15/2014 1:49:03.096 PM
    1
    38
    5
    [NULL]
    [NULL]
    mylogin
    mydb
    [NULL]
    [NULL]
    ; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
    what kind of event monitored for with this data? how to stop monitoring on this event?
    Also how to check all auditing setting is on. For example, if I turn on audit on disk like:
    sp_audit "disk", "all", "all", "on"
    then how to know how many auditing event is on in the future(maybe set by someone else)?

    Hi Kent,
    In general sp_displayaudit will show you what audit options are currently on.
    The function audit_event_name  will help you decode the audit event numbers.
    1>
    2> select audit_event_name(45)
    3> go
    Login
    (1 row affected)

  • Spectral Editing Techniques in Adobe Audition for the Mac | Audition Feature Tour | Adobe TV

    In this tutorial, Sr. Worldwide Evangelist Jason Levine walks you through the techniques for using the Spectral Frequency Display in the Adobe Audition for Mac beta. Learn about when to use subtractive vs. spectral decay-based noise reduction methods, remove hiss & hum visually, and even remove individual sounds using familiar Adobe Photoshop tools like the Marquee, Lasso and Spot Healing Brush.
    [Download the Audition for Mac beta | http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_audition]
    http://adobe.ly/zczHsz

    Windows users: don't be put off by the "for the Mac" in the title. It's an excellent tutorial on using spectral display for editing, and it's not Mac specific at all. I learned a lot!

  • Preserve Manual Overrides

    Hi All,
    I have a script which find  all the paragraph styles in myFind Array and change all the paragraph styles as per in the name of myChange Array.
    Request:
    Changing Paragraphs Styles without clear overrides or preserve local overrides like manual bold, italic etc....
    script:
    var myFind = ["H1", "H2", "H5"]
    var myChange = ["a_H1", "a_H2", "a_H5"]
    for(var i=0; i<myFind.length; i++){
         app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
         app.findGrepPreferences.appliedParagraphStyle = myFind[i];
         app.changeGrepPreferences.appliedParagraphStyle =myChange[i];
         app.activeDocument.changeGrep();
         app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
    Could anyone give solution for preserve clear overrides.
    Thanks in advance
    Beginner

    Dear Trevor/Jump_Over,
    I want to preserve locat format (i.e., maintain manual bold, italic etc...)
    Trying Trevor script. But please find the screenshot
    var myFind = ["H1", "H2"]
    var myChange = ["a_H1", "a_H2"]
    for(var i=0; i<myFind.length; i++){
         app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
         app.findGrepPreferences.appliedParagraphStyle = myFind[i];
          myFind[i].applyParagraphStyle(app.activeDocument.paragraphStyles.itemByName(myChange[i]), false)
    //~      //app.changeGrepPreferences.appliedParagraphStyle =myChange[i];
    //~      //app.activeDocument.changeGrep();
         app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;

  • Auditing...without auditing....????

    Hi,
    very strange title... but....
    I have an application developed in Oracle Forms10g. The end-users connect via a custom login form to the database as application users... I mean two or more end-users (each one is related to an application user , let's say "john b","stella k",...e.t.c.) connect to the database via a db user called db_user_a.... whereas another group of end-users are connected to the database via another db user called db_user_b.... e.t.c....
    In this situation , i cannot audit each enduser's actions in the database.... since with the same db user(db_user_a,db_user_b) are connected more than one end-users...
    So , presumably... i can relate the v$session with a table located in the application's dataschema and by comparing the logon_time(of v$session) to date_in/time_in of my table the sid of the v$session can be picked up....
    Having this sid column of the v$session is there any manner to record what the user have done insert(s),update(s)...e.t.c.... in one table of my application...????
    I use Oracle10g....
    Many thanks,
    Simon

    Hi Simon,
    >>Is FGA included to the Oracle10g Standard Edition....?????
    No, only in EE. Check out this link:
    "http://www.oracle.com/database/product_editions.html"
    HTH
    Zack

  • Statement AUDIT SELECT TABLE also audits update, delete and inserts

    Hi,
    Database Oracle 11g.
    After turning on AUDIT with these 2 statements:
    SQL> ALTER SYSTEM SET audit_trail = "DB_EXTENDED" SCOPE=SPFILE;
    SQL> AUDIT SELECT TABLE BY ACCESS;
    then insert, update and delete statements are recorded in sys.aud$ as well as select statements.
    My expectation was to see only select statements in sys.aud$.
    Please clarify :-)
    Best regards
    Erik

    it should not record other action apart from select,can you crosscheck audit configuration by
    select * from DBA_OBJ_AUDIT_OPTS;
    SELECT * FROM ALL_DEF_AUDIT_OPTS;

  • Can't load ASIO driver / device could not be opened error in Audition CC but not Audition CS6

    I have a M-Audio Fast Track Ultra USB 2.0 that I use for audio.  I installed Audition CC and it wont let me use the ASIO driver for it.  I get the device could not be opened error.  On the same system I have Audition CS6 which works with the ASIO driver fine.  Also have Vegas, Premiere, etc - all on the same machine and no problems with the M-Audio driver.  I can load the Blackmagic ASIO driver but don't use that for audio mixing.  Changing Use Machine Specific Device Defaults and Force Hardware to Sample Rate does nothing.   Running Windows 7 64 bit.

    M-Audio 64-bit driver is apparently troublesome, but the 32-bit one works fine - which explains why CS6 works and CC doesn't. As far as I can find out, you aren't the only person with this problem - have a look at this Reaper forum thread - you may get some useful information from it (no promises!)
    http://forum.cockos.com/showthread.php?t=127129

  • How can I open old audition files in New Audition Program?

    Help, I had to do a RESTORE on my New Computer , I saved dozen of songs and sessions as well as  My Audition 1.5 {Program) on an external HD. When I reinstalled Adobe Audtion on my Computer again, it opens. But when I try to open any of the "songs (seesions) I saved on my external HD, the files do NOT open up in Audition, instead Audition opens up as a New Session., with no Hint of the recorded file. When I insert the files thru Audio, they all come in at the beginning of the tracks, some slower eetc, NOT they way they werfe originally recorded in Audition... what can I do?...thanks./..victor

    Check the folder for the songs on your external hard drive.  Is the session file still contained in each one?  The session file's the one with the .ses ending.

Maybe you are looking for