ADOBE 3.0 HELP PRETTY PLEASE !!!

Hello,
I know I am using a relect, but ATM I have no choice and am mid project. I recently and randomly have lost the ability to adjust my amplitude on the Edit screen. Usually I would just highlight my selection and then with my L mouse button adjust. Now there is the letter "L" next to my Time Selection Tool and I can no longer adjust. Please help me.

Nothing wrong in still using AA 3. It still works very well. I am not sure what has gone missing from your workspace but perhaps you mean the On-clip UI which appears at the top of the waveform with a volume knob icon when you make a selection. If so it is turned on or off in the View menu or by using the keyboard shortcut 6 (as in the numbers at the top of your keyboard).

Similar Messages

Tracks 17 onward not working can someone help pretty please?

Created a 32 track composition and recently backed it up to a separate hard drive to make room on my mac, and when I opened it again on Logic Express Track 17 to 32 aren't working.
The WAVE files are there and when double clicked they work, but not as part of the composition.
In the mixer the said tracks do not even show the EQ's!
Can anyone please help me understand how to make logic play the tracks?

I'm found solution here:
http://www.cydiaios7.com/back-camera-not-working-after-ios-7-update-solution.htm l
Solution 4 help me:
1. Try a different camera app instead of the stock one – download Camera Awesome, free of charge, from the App store
2. Install and both cameras should work properly.
Some times camera not work again. Need to restart Camera Awesome, switch front/rear camera and camera work again.
This appears to be a definite software issue, not hardware, despite the fact that not all devices are fully supported with all the new features in iOS 7.

ITunes iMatch playlist question/help - Pretty Please!

I need help! I currently use iTunes iMatch and have all my playlist setup but now I only want to have some (like 5) of those playlists to sync to my iPhone 5, how do I do that?! I cannot figure it out! Please help me! Thank you!

Hi! Thank you for the reply. This is going to sound really lame ... but what do you mean "remove playlists from the cloud"? I don't want to remove the playlists, I just don't want them to sync to my iPhone 5. I only want certain playlists to play on my iPhone and everything (even the playlist i want sync'd to my iPhone) to stay on iTunes and all my other devices. Now that I write it out, I'm not sure if that even makes sense to me. Geez.

Using adobe DNG convert help me please!!!!!

I have Adobe CS5 and have just bought a panasonic FZ200. Rawimages cant be opened from this camera in CS5 so I have downloaded the DNG converter. All is well on my laptop but on the PC which is where I would really like to edit my images I keep getting an error message 'the source folder doesnot contain any supported camera raw files'. They are the same files! I have copied them on to both machines so why does the converter not see them? My laptop runs windows 7 and the PC runs Vista - is this significant? I am really fed up with this , have been trying to get these images edited all day!!!!

I think the problem you are having is that, when browsing using the DNG converter, you are opening the folder that contains your raw images. Notice that the prompt asks for the FOLDER that contains your raw images. Choose that folder, but don't open it. Then the DNG converter should convert the images that are in that folder. If you only want to convert one or two images, drag/drop them onto the icon that you use to start the DNG converter.

Problems to install Adobe premiere cs3.Help me Please

Hi!
I have once installed Premiere on my machine and a few days later I have uninstall it. Now I am trying to install and at the end of the initialization of the installation when it is at the end I get a message saying that there is another adobe´s installation going on at the moment and I should finish it first but there is no other installation. I have looked at the programs I have installed on my computer and there it is one instance of adobe premiere. If I click it to uninstall it doesnt do anything.
I have try to go to regedit and delete it from /microsoft/windows/currentverion/uninstall but I still cant install it.
What should I do ?
thank you
Eduardo Tavares

There are several
installation troubleshooting documents available, however, since installation support is free, contact Adobe directly as Harm suggests.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Nokia 5000 help pretty please!

The screen of my nokia 5000 has broken though the phone is working and I'm stuck without any numbers (and I've just moved away from all my friends!) Could someone talk me through the menu options, into the phonebook and how to save all my numbers onto the simcard so i can get them? You would do me a massive favour.
Thanks, Joyous

rahul, use ovi suite on computer to do the backup..
Regards,
Dr. Shoubhik

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

I bought photoshop elements 8 a few years ago. I had to reinstall my computer, and I can't find this PSE 8 on Adobe. Only the 12 is available, but I've paid a serial for the 8. Can you help me please ?

I bought photoshop elements 8 a few years ago. I had to reinstall my computer, and I can't find this PSE 8 on Adobe. Only the 12 is available, but I've paid a serial for the 8. Can you help me please ?

Download Photoshop Elements products | 9, 8, 7
Mylenium

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe Content Viewer problem. Please Help me...

Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
thanks

Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
Thank you for your patience.
Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
Re: Adobe Content Viewer problem. Please Help me...
created by Bob Levine in Digital Publishing Suite - View the full discussion
As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
Bob
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When i install the new os my fcp,motion and many adobe software not working so please help me out.

when i install the new os my fcp,motion and many adobe software not working so please help me out.
there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.

You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
It would also be nice if you could include which model MacBook Air you're using.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Pretty Please Help me - Context Menu

PS... this is not only a AS3 question, but also AS2 would work just fine...
This is going to be a hard one to communicate, so I will have example files attached...
How can I right click on a MC and have a custom menu, WHEN another movieclip is on a higher layer and overlapping that original MC (and this second movieclip does Not have a context menu)
Thank you so very much for your time and help on this issue,
two files are attached, first is the most basic way I can show this issue.
The second is a better example of Why I NEED to figure this out.
http://rapidshare.com/files/380919381/contextexample.fla.html
http://rapidshare.com/files/380919537/contextexample2.fla.html
Thanks so very much for your time on this issue... in the mean time I will try and help others while I wait for an answer...
-GK

bump... looked all over the internet and back, been to a dozen forums...
I just cant belive this is impossible....
pretty please help!
-GK

Adobe Fireworks cs6 is not opening .Saying internal eror occured help me please

Adobe Fireworks cs6 is not opening .Saying internal eror occured help me please :

For me the Fireworks stopped when it got to "Intializing Tab Windows", then a crashed and displayed "Could not complete your request. an error occurred" and would never load. Basically dead. I couldn't use it at all. My whole workfow came to a stand still.
BACKGROUND
Just before this happened, I was trying a new feature from within Dreamweaver. While inside Dreamweaver, I could double-click an image file and it opened in my Fireworks to be edited. I thought . . . Wow, this is really cool. I edited that image and closed it and continued on my work. Since then, that "Connection" between applications has become permanent. Fireworks "THINKS" it is still connected to Dreamweaver. Later Fireworks would NOT open/load at. I would always get the above error.
PARTIAL SOLUTION
BTW: I had to do this twice, because the first time, I missed a file somewhere.
I had to completely uninstall all ADOBE applications. I mean everything! I had CS3 & CS4 and Adobe Readers on my system.
Since I'm on the mac, I went through the "Application Support" both user and system and the "Preferences" for both user and system and deleted everything that had either "adobe" or "macromedia" in it. There was also a file in the "Launch Agent & Daemons".
I emptied the trash and did a power off restart. Then I reinstalled CS6. Now Fireworks at least loads and I can use it again, but it still isn't the same.
OBSERVATION
Fireworks and Dreamweaver are still "Connected". It won't save an existing PNG file as itself, it displays an error, "That file is open in another application", which is NOT true. I have to use the "Save As" option, and use the Finder to rename that file. I also notice an extra file labeled ex:0000056 which looks like the file I tried to save.
So at least I can use my Fireworks again although it is irritating. I don't know how to "CUT" the connection between applications. Uninstalling & reinstalling did NOT reset this, the only option left would be a backup, wipe and fresh install of my entire laptop. I just don't have time to do that right now. Hope that helps someone else.
Arlene

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

Premere and After Effects are missing from Cloud Adobe Application Manager... please help ASAP

Premere and After Effects are missing from Cloud Adobe Application Manager... please help ASAP

Short and to the point: If they don't show up, your system doesn't support them. Refer to the Tech Specs on teh product pages and make up your mind...
Mylenium

ADOBE 3.0 HELP PRETTY PLEASE !!!

Similar Messages

Maybe you are looking for