Adobe Acrobat 9 Pro...bad installation?

I recently installed the entire CS4 Design Premium onto Vista OS.
The program itself seems to open fine. But after installing this, everytime I right-click on any icon or file (even if all I want to do is check properties or somehting), an installing window appears and acts like the Acrobat program is trying to install. The green progress bar just repeatedly starts and stops until I hit cancel. Once I hit cancel, I can continue either opening the file or checking its properties.
Do I have a bad install or is this a Vista issue?
Anyone else had tis problem and what can be done to correct it?
Any help is greatly appreciated!

This happens when I right click on ANYTHING at all, I can even just right-click on the desktop and that install window comes on!
The program itself opens fine separately. I 'll be honest, I haven't used it much as I am just learning all the programs, so if it is actually working correctly I don't know. I do know that I tried to used the "covert to pdf" button while on Internet Explorer and it would not work. Don't know if the problem is related or not...
I have that idiotic UAC off - it drove me crazy...

Similar Messages

  • Adobe Acrobat Pro 8 Installation Problem

    I've had Adobe Acrobat Pro 8 running fine for several years on XP Pro.  Our company rolled out upgraded hardware with a new image about a year ago, and I cannot successfully install 8 on any of the units.  Most recent issue, using CD, install went up to accepting end user license. I accepted and then installation froze and I had to End Program.  When I try to launch now, Getting Started splash screen comes up then program freezes and terminates.  It seems like a permissions/security issue, can anybody assist?

    I assume the new system is Win7 and most likely a 64-bit system. If so, you may just have to upgrade to AA XI. Folks have gotten AA8 to work on a Win7 32-bit system. You might be successful if you download the updates for AA8 and install those. I think it took at least AA8.1 to work with a 64-bit XP.

  • Adobe Acrobat Pro XI - Installs in Slovenian and Not In English Even Though English Selected At Inst

    Hello:
          I have downloaded, installed, opened, closed, removed, cleaned registry and reinstalled Acrobat Pro XI three times and each time it installs in Slovenian and not ENGLISH (North American). English was the language that I down loaded from the Adobe website and it was the language that was clearly selected for the INSTALL.  Unfortunately, it always loads Slovenian.  Is there a registry hack or some simple way to change the language to ENGLISH (North American), since I cannot read Slovenian?
    Thanks!
    Doug

    Hi dshuck,
    Please let us know if you are using Windows or Mac. If you are using Mac then you can try this step to fix the issue
    Open System Preferences. 
    Choose View > Language & Region or click the Language & Region icon.
    In the Languages pane, remove all other language leaving English (US). If you don't see your language, click the Add Language button.
    Regards,
    Abhijit

  • Cannot print doc to pdf after online adobe acrobat pro 7 installation

    downloaded CS2 from adobe website, installed successfully, can read pdf file, but cannot save words or excel doc to pdf, please help!

    There is no chance that Acrobat 7's PDF printer can work in 64-bit systems. This PDF printer is used in converting Word and Excel documents to PDF.
    So it is time to upgrade Acrobat along with upgrading Windows.

  • Trouble with Adobe Acrobat Pro installation from Creative Cloud

    When I attempt to install Adobe Acrobat Pro from Creative Cloud, it will always fail on the first attemp. If I retry, it installs it. Then, when I open a pdf document, the application quits in seconds. I get a modal window with the license agreement. However, it is blank and the pull downs are empty. I hit a dead end.
    This is so aggravating; especially when Adobe is charging me for my membership every month.
    What gives? Can someone help with this?
    Brian

    Brian which operating system are you using?  Do you receive any specific errors during the installation process?  If you are using a Windows operating system then please uninstall Acrobat using the Programs and Features control panel.  Once done then please try using the Acrobat Cleaner Tool available at http://labs.adobe.com/downloads/acrobatcleaner.html.
    Also you mentioned that the EULA window is blank you may also want to see Blank EULA screen appears on Acrobat XI launch - http://helpx.adobe.com/acrobat/kb/blank-eula-screen-appears-acrobat.html.  Solution 2 is not likely to be relevant unless you are using an operating system not currently supported by the Creative Cloud Desktop application.

  • Adobe Acrobat Pro 9 - I have serial #, lost installation cd, cannot find downloadable files.

    I have a license for Adobe Acrobat Pro 9, however, I've lost my installation disc. I was able to download files from Abobe, but when I entered my serial number from my account, it says invalid. I noticed it may be because it says it is the 9 Pro Extended version.
    Is this why my serial number is not valid and if so, where can I get the files I need for version 9?
    Thank you!

    The only public download is for 9 Pro, not Extended. If you are talking about the latter you will have to see if one of the staff will provide the link to you. If you are looking for Pro, it is at http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html.

  • Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050

    Hi,
    On trying to run a failed update from Adobe, my Adobe Acrobat Pro X became corrupt and failed to open.
    I am now trying to reinstall the software, but the software does not install successfully with Exit Code: 6 and the following key warnings and errors:
    WARNING: DW022
    WARNING: DS013
    ERROR: DW006
    ERROR: DW050
    The full error message is as follows:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ... WARNING: DS013, DW022 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 6 warning(s)
    WARNING: DW022: AdobeCode {AC76BA86-1033-F400-7760-000000000005} NonAdobePayload Acrobat Professional 10.0.0.0 with version (2012-03-05 05:30:16.288604) already installed with incompatible version (2011-03-17 01:56:17.451315)
    WARNING: DS013: Payload {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed
    Please help! I uninstalled the corrupt version X before this installation attempt.
    I also still have Acrobat Pro 9 on my machine as backup (for this precise reason) but don't believe this is the problem as they have co-existed without a problem for near a month now. The corruption in version X occured after this morning's failed update from Adobe.
    Many thanks,
    K

    Thank you! That did indeed do the trick
    Must have been a font or something causing the problems, as opening in safe mode allowed the software to install correctly.
    Thanks again!!
    K
    Date: Fri, 31 Aug 2012 05:28:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050
        Re: Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050
        created by techkid123 in Downloading, Installing, Setting Up - View the full discussion
    Hi.
      The error message as displayed in the above error log is EXIT CODE 6.
    Please try and follow the below mentioned KnowledgeBase Doc
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Hope it Helps
    Thanks
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4662988#4662988
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4662988#4662988. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Help, my Adobe Acrobat Pro installation stops!

    I have created a package with "Creative cloud packager" with Adobe Acrobat Pro inside.
    Once I download it and run the installation, after some minutes the progress bar stops and go back to the beginning, and nothing is installed.
    Do you know what can be failing?
    Thanks!

    Hey Amit,
    Are you facing any specific error message with this installation?
    Try downloading the installer package from this link ( Download Acrobat products | Standard, Pro | XI, X ) and then try installing the software.
    Hope that helps you!!
    Regards,
    Rahul Tyagi

  • Bought new Adobe Acrobat Pro XI tried to install but got message installer encountered an error that caused installation to fail

    Bought new Adobe Acrobat Pro XI tried to install but got message installer encountered an error that caused installation to fail, can anyone help with this?  I am stuck.

    Hello Joe,
    did you purchase your product from these firms like Amazon? If yes, this is not a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
    The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
    Hans-Günter

  • Problem with Adobe Acrobat Pro XI after installation on Mac

    I just installed Adobe Acrobat Pro XI on my Mac. My Mac has the correct version of OS and Safari yet I can not launch Adobe. When I launch it, an error box comes up and says a problem has been reported to Adobe.  That's as far as it gets. Has anyone had this problem before?

    Hi lsgahan,
    Please try the following steps and let me know.
    Delete all the files from following folders:
    Library/Application Support/Adobe/SLStore
    Library/Application Support/Adobe/SLCache
    And, delete all files from following folder except cache.db
    Library/Application Support/Adobe/Adobe PCD
    Launch Acrobat and enter the serial number when prompted and check.
    Regards,
    Rave

  • Downloaded Adobe Acrobat Pro XI.  At a certain point, the installation stalls and starts "running back."  Then the message shows:  setup interrupted.  Have tried 7 times.

    What do I do after trying to download Adobe Acrobat Pro XI seven times and getting message:  setup interrupted?

    if win os, run the cleaner and retry - Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

  • How to activate Adobe Acrobat Pro?--this is installation on 2nd computer--I logged into Adobe ID successfully but no luck

    I have student edition of Adobe Acrobat Pro successfully installed and in  use for about a year. I downloaded a trial version of Adobe Acrobat Pro for Adobe student site.. the software is working but thinks I am working off a 30 day trial instead of seeking to activate...How do I get software to activate?

    Hi unc_gatech_plus,
    Thank you for posting on the Adobe forums, you need a serial no. to get the software activated.
    Kindly find below few links related to student and teacher edition softwares.
    Education FAQ
    Find your serial number quickly
    Thanks,
    Vikrantt Singh

  • How do I set customized changes in Custom Toolsets during deployed installation on Adobe Acrobat Pro XI?

    I am trying to set settings in the Custom Toolsets, specifically Protection\Redaction Properties - Example:  Changing highlight color and enabling text overlay.  Is there a way to modify the settings for a deployment?  I am unable to find a way through the Customization wizard and am having trouble finding documentation on deploying customized settings to toolsets. 
    Issue:
    Customizing Toolsets as part of Adobe Acrobat Pro XI Deployment
    Environment:
    For deployment I am using the Adobe Customization Wizard and SCCM 2012 to distribute and install Adobe Acrobat Pro XI.
    Environment has both Windows 7 and Windows 8.1
    Adobe Acrobat Pro XI
    Thank you,
    Mike

    It's in the ETK:
    3   Pre-Deployment Planning — Enterprise Administration Guide
    3.7.4   Tool Sets
    Acrobat 11.0 introduces a streamlined way to create and manage custom tool sets across the enterprise. A Customize button in the upper right-hand area of the toolbar allows users to create new tool sets, manage existing tool sets, and choose any existing tool set.
    This feature helps organizations standardize task-specific tool views, reduce training costs, and improve employee efficiency by grouping related tools into a common view. This feature allows:
    End users to easily create or import custom tool sets.
    Easy switching between different tool sets.
    IT to create, distribute, and otherwise manage tool sets across the enterprise.
    _images/toolsetmenu.png
    3.7.4.1   Tool set file locations
    Tool set files reside in two locations:
    A local user directory (full access): Files which are stored and imported by the current user are placed in the default current user’s directory. For example:
    C:\Users\<username>\AppData\Roaming\Adobe\Acrobat\11.0\UICustomization\<anyname>.aaui
    A local, product directory (read only): Files in this directory are visible to any user on the machine. For example:
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\UICustomization\<language>\<anyname>.aaui
    3.7.4.2   UI overview
    To work with tool sets:
    Choose Customize > Manage Tool Sets.
    Perform any needed action.
    Note When creating a new Tool Set, you can choose any available tool in any desired order.
    Managing tool sets
    _images/Toolsetpanel.png

  • Problem with Adobe Acrobat Pro Extended version 9.3.4 reading Inventor 2009

    I would like to be able to generate 3D PDF files from Autodesk Inventor CAD models (e.g. .iam files) using Adobe Acrobat Pro Extended.  I am constrained to use Inventor 2009.  When I originally installed Acrobat Pro Extended, I was able to make this work after installing the IMPORT3D update at:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4073
    Recently (9/5/2010), I updated Acrobat Pro Extended to version 9.3.4.  I believe that following that update, I lost the ability to read in Inventor 2009 files.  Acrobat Pro Extended now gives the error messages:
    "Exception has been raised" followed by:
    "Acrobat could not open 'file' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).  To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
    This is exactly what happened when I first installed Acrobat Pro extended and before I installed the IMPORT3D update mentioned above.  I tried re-installing that update but now the installer gives the error message:
    "No qualifying products found to apply this update."
    Note that Inventor 2009 does allow one to "Save Copy As" to PDF format, but this just creates a 2D PDF snapshot of the current model view -- same for print to pdf.
    I suppose one thing to try is removing Acrobat Pro Extended and then re-installing without the 9.3.4 update, but with the IMPORT3D update -- but if that is necessary, then I won't be able to take advantage of any further updates (e.g. security updates) to Acrobat, which seems like a bad situation.
    Has anyone else had this problem? Or is it just me?

    I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF.  After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files.  For example a .ipt file (part file) seemed to convert fine.  I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked.  Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default.  In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

  • Problem installing Adobe Acrobat Pro 9

    I have an HP Pavilion dvd6-3033 with Windows 7 Home Premium operating system. Some time ago I purchased and installed the Adobe Creative Suite 5 Web Premium system which included a disc with Adobe Acrobate Pro 9. Everything installed just fine. Recently my hard drive went bad and I had to install a new one. After reinstalling Windows 7 Home Premium I reinstalled the Creative Suite 5 just fine, but the Acrobat Pro 9 installation, after running for a while, produces Error 1311 (Source file not found: F:\Acrobat 9\Data1.cab  Verify the file exists and that you can access it.) I checked the Acrobat9 folder on the installation disc and Data1.cab is there, but apparently the installer for some reason doesn't recognize it. Any suggestions on what to do?

    use the below link:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Adobe Acrobat Pro in Windows 7 w/ Autocad in XP Mode- not working

    I'm running Autocad Arch Desktop (ADT) in Windows XP Mode within Windows 7, and have Adobe Acrobat Pro installed in Windows 7.  Unfortunately, no "Adobe PDF"  pulldown was created within ADT once Adobe Pro was installed, and there isn't any sign of Adobe in ADT (normally, Adobe automatically installs pulldowns within ADT once installed).  Adobe and ADT function normally otherwise.  Does anyone know how to get Adobe Acrobat Pro in Windows 7 to recognize and work with ADT in Windows XP Mode?

    Can you tell me how to set the defaults to Courier 10pt font?  I tried select all and it's grayed out, but that was after the
    fact.  Where are the original default presets?
    Thank you in advance.

Maybe you are looking for