Adobe Acrobat 9 Pro Printer Drivers does not pass windows logo testing.

Issue:
I'am using the Acrobat Wizard tool to customize Adobe Acrobat 9 Pro to run create Adobe installed to run siliently within our network but I recieve the following hardware prompt to complete the install.
During the install of the Adobe Acrobat 9 Pro I recieve a Hardware Installation prompt:
The software you are installing for this hardware:
Printer
Has not passed Windows Logo testing to verfiy its compatibility with Windows XP.
Continue your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
Is there any way I can download the drivers before I run the installation or is there a patch for Adobe Acrobat Pro 9.
Thanks
John T

When I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
That sounds like the GEAR drivers that iTunes uses for burning and importing aren't going in properly. (or there's damaged GEAR drivers for an old install stuck on the PC.
Perhaps manually uninstalling and reinstalling the GEAR drivers can get you past this. There's instructions for that on the GEAR wiki:
[DRIVERS: Windows - Updating, removing, 64 bit versions, etc|http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:Windows_-_Updating%2C_removing%2C_64_bit_versions%2Cetc]

Similar Messages

  • Itunes does not pass windows logo testing to verify CD/DVDrom drives, Why?

    Hello All,
    When I try to install Itunes 9.2 on my XP 32bit machine, I get the error message "Itunes does not pass windows logo testing to verify CD/DVD rom drives this software will not be installed. Contact your administrator" I am the owner & my account has administrator rights. When I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
    Thanks
    Lacanox

    When I start itunes i get the message "Itunes was not properly installed if you wish to burn Cds you will need to reinstall itunes" Any ideas what i should do anyone?
    That sounds like the GEAR drivers that iTunes uses for burning and importing aren't going in properly. (or there's damaged GEAR drivers for an old install stuck on the PC.
    Perhaps manually uninstalling and reinstalling the GEAR drivers can get you past this. There's instructions for that on the GEAR wiki:
    [DRIVERS: Windows - Updating, removing, 64 bit versions, etc|http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:Windows_-_Updating%2C_removing%2C_64_bit_versions%2Cetc]

  • Acrobat Pro 9 has not passed Windows Logo testing??

    Bought download of Acrobat Pro 9 today. Installation on Windows XP Pro seemed to proceed well. The a pop-up window said The sortware you are installing for this hardware  Printers has not passed Windows Logo testing to verify its compatability with Windows XP. then a link to "why this is important" and further warning "Continuing your installation of this software may impari ro destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing."
    Choices are Continue Anyway  or STOP Installation
    What does this mean? What do I do to get this upgrade installed and functioning correctly?

    try downloading and saving a fresh copy of the installer to your hard drive. (run the install from there rather than online.) switch off antispyware and antivirus applications prior to the install.
    iTunes 7.0.2.16 Installer
    if you get the message again with the fresh installer, perhaps try checking through the following Microsoft Knowledge Base document:
    (MS) You cannot install some updates or programs

  • Drivers do not pass windows compatibility testing

    MSI K7N2G Motherboard
    Athlon 2400 xp
    Seagate 80 GB SATA Hard Drive
    I am building a new computer and whenever I reinstall Windows or am installing windows xp for the first time, I get warnings that the drivers do not pass windows logo compatibility testing.  This happens for the Promise SATA drivers that I had to install to install windows xp in addition to pretty much all of the nforce2 and nvidia drivers.  Are these drivers okay and just aren't recognized by windows or are there problems?  Thanks

    mmlemay,
    It just means you have drivers that the Microsoft Techs have not finished playing with. When it comes to nVidia Drivers, I would not worry if they have not been approved by MS yet. nVidia has one of the Driver Coders on the market.
    Take Care,
    Richard

  • "Not passed Windows logo testing" message

    I just download iTunes 8 and partway through the install got a message that said "software has not passed Windows Logo Testing" and that this could compromise my system.
    The older version of iTunes worked just fine, is there anywhere I can download the older version?

    Just to establish a good base line I am going to have you uninstall and reinstall the printer from our website rather than the CD-ROM that came with the machine. 
    First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    Then follow this link to download the full feature software and drivers for the printer: 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5061073&
    Install that using the USB >> Wireless setup wizard and establish a static IP (video below on that) : 
    Assigning a Static IP Address to Your Wireless HP Printer - Windows 7 - YouTube
    Have a great day!

  • Software CD has not passed Windows Logo testing???

    This is what it showed when I was installing the softwares from the CD which came with my N73 music edition... "...has not passed Windows Logo testing"
    I still clicked on "continue anyway" tab and went ahead... But now the data cable doesn't connect to the softwares. For transferring music, I clicked on media player option and it said messaging is using my memory card, so first change settings in messaging. On clicking Nokia PC suite option, it keeps on detecting the device but nothing happens...
    My PC has Windows XP only, the CD's cover shows its compatibility with XP... what can be the problem then??

    you can generally ignore the error message if you are using trusted software ie from nokia etc as it just means your operating system is unable to verify its authentisity (sp) but for transfering data your better to select data transfer when connecting the usb and then dragging and dropping the files into the handset.
    go to my computer then open the icon called removable disk, there will be a folder called music or something similar -this is your phones mass memory, drop the songs into here.
    hope this helps

  • Pop Up: The software you are installing for this hardware has not passed Windows Logo testing - AntiVirus

    When deploying Endpoint Protection with SCCM 2012, some workstations are getting a popup saying:
    The software you are installing for this hardware has not passed Windows Logo
    testing and it references "Antivirus". Upon clicking continue anyway it finished installing.
    I'm not able to duplicate it on command and not sure why it's happening. Anyone else see this or have ideas on how to troubleshoot?

    Without a real screenshot (and maybe even being there), it's hard to say. IME this is not normal behavior and my first thought is that this is actually some malware causing this.
    Jason | http://blog.configmgrftw.com
    Sorry it took a while, was waiting for it to happen again. Here is an actual screen shot. I'm leaving it until I hear back from you guys. This client actually shows that the endpoint protection deployment state failed with this message:
    Description: 0x8004FF03.                                   
    InstallUpgradeOrUpdateInProgress=4.1.509.0

  • "Software has not passed Windows logo testing"

    My sister just bought a new 30G Ipod. During the installation a window popped up saying
    "The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP"
    However my dad also has a 30GB Ipod that he's had for a few months now and its working just fine. So I guess my question is
    (1)Is there a difference in the systems or something that the new one isn't compatible?
    (2)Is there anyway to perhaps have it tested somehow by the computer or some other solution to get past this?
    (I myself don't know much about Ipods or Apple products so I apologize if this is a doofy question!)
    Compaq 9500   Windows XP  

    try downloading and saving a fresh copy of the installer to your hard drive. (run the install from there rather than online.) switch off antispyware and antivirus applications prior to the install.
    iTunes 7.0.2.16 Installer
    if you get the message again with the fresh installer, perhaps try checking through the following Microsoft Knowledge Base document:
    (MS) You cannot install some updates or programs

  • Itunes 7.6 update not passing windows logo testing for compatibility

    I have tried to update itunes 3 times. It downloads fine but when it gets to the installation part, I get a warning from windows saying that this software has not passed the windows logo test for compatibility and that if I proceed with the installaton, The system may get impaired. So I stop installation, but eventually I have to update itunes. My ipod gets updated but itunes is not. Lately I've been having problems with my ipod acting buggy. Is this familiar to anyone? Why is this happening and what do I need to do? Thanks!

    With that particular message, it might be worth checking through the techniques from the following Microsoft document:
    (MS) You cannot install some updates or programs

  • Need software that has passed windows logo testing

    can not install the wireless Officejet 6500.  The 6500 is installed on the network.  Message while do installation is "windows logo testing failed to verify compatibilty with windows XP"  installation will not go beyond this point.  The odd part of this is that I had it installed at one time and then the installtion failed.
    I have tried your XP solutions and here is the message I received  "an error ocurred during installation.  The driver can not be installed because it is either not digitally signed or not signed in an approtriate manner"
    Where do I go from here?

    Hi callison11,
    On the Software Installation screen with the 'Windows logo testing ' error, click Continue Anyway .
    NOTE:You might receive more than one prompt about the software not passing Windows logo testing. Click Continue Anyway each time you receive the prompt.
    Windows logo testing is part of Microsoft's WHQL (Windows Hardware Quality Lab) program, which helps customers identify products that are compatible with the Windows operating system. WHQL certification is not related to product functionality. You can still install and use the HP printer and software without the WHQL certification.
    2.  Follow the on-screen instructions until you get to the Found New Hardware Wizard screen. This screen might include a list of products and prompt you to Please select the best match for your hardware from the list below . Leave the selection at the default, and then click Next .
    3.  Continue following the on-screen instructions to complete the HP software installation.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Ei just paid for Adobe Acrobat Pro and I can not download the program, verytime i go to down load it tells me it doesn't download in my language which is english?why is this program I ordered not letting me download

    i just paid for Adobe Acrobat Pro and I can not download the program, every time i go to down load it tells me it doesn't download in my language which is English? why is this program I ordered not letting me download

    http://www.howtogeek.com/120277/how-to-install-flash-on-the-nexus-7-and-other-jelly-bean-devices/
    You do not need a Beta channel build of Firefox (which currently is 32.0b6) to use Flash as the issue was you needed Firefox 27.0 or newer to use the old Flash 11.1 plugin on Android '''4.4'''. after it came out on tablets/phones.
    What Nexus 7 version do you have as there was a 2012 and a 2013 model. A easy way to tell if it is a 2013 is it has a camera on each '''back''' and front while 2012 only has one on front.
    If it is the 2012 then it has a Nvidia Tegra 3 so the old Flash 11.1 Plugin is disabled.
    For reading only as Bugzilla is not a discussion forum or for "me too" comments.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=968219 Bug 968219 - flash does not work on Nexus 7]
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=957694 Bug 957694 - Hang/deadlock with Flash on 4.4 on Tegra3]

  • Adobe Acrobat Pro 10.1.10 not updating - using MAC OS X, v 10.9.5. Help!

    Adobe Acrobat Pro 10.1.10 not updating. Trying to update to version 10.1.13. on MAC OS X, v 10.9.5. All my Adobe CS5.5 Design Premium products update fine.
    First tried automatic updates and go this: Update error:  An error occurred. Please check for updates again later. Error: 1514.
    Then went to Adobe.com to download update.
    Downloaded the 10.1.13 update, started installation but in final stage of installation got this message "The Installation Failed (encountered an error) Contact software manufacturer for assistance.”
    What do I do now? Thanks,

    Hey Marylou Wade,
    We would need the Acrobat installation logs in order to analyze this error. Please follow the below procedure to extract the log :
    - During the installation press Command + L.
    - Installer Log window appears. Now On the top left corner of this window, by default 'Show Errors Only' is selected in drop-down list.
    - Change it to 'Show All Logs'. Now when the installer hangs, copy log from here and send it to us.
    Regards,
    Rahul Tyagi

  • My licensed copy of Adobe Acrobat Pro 9.0 will not load

    My licensed copy of Adobe Acrobat Pro 9.0 will not load - the disk just isn't recognized by our drives any longer. How do I get a replacement disk?  BTW - Adobe support seems to be the worst I've ever experienced from any single company. I am getting no where! It took me forever to find this forum and I am not expecting any results.  Is there a competitor for Adobe Acrobat 9.0?  I need to convert documents to PDF, combine pages, etc.... We are paperless and need these functions.

    Try post 8 in http://forums.adobe.com/thread/1061905.

  • Adobe Acrobat Pro XI download will not install; stalls at preparing files for extraction

    Adobe Acrobat Pro XI download will not install; stalls at preparing files for extraction

    what os?
    what file(s) (name/extension) have your downloaded and is their file size?

  • Adobe reader pro x license does not accept

    adobe reader pro x license does not accept

    Do you have purchased a license?  If so, do you have a serial number?
    Or did you subscribe to your product?  If so, you need to sign in with your Adobe ID.

Maybe you are looking for