Adobe Acrobat Pro 9, "This document could not Printed" then "No pages were selected"

Windows 7, Adobe Acrobat Pro 9 (latest update)
I have been researching this issue for days and can't find a solution. I am using Acrobat not Reader, there is not an option to uncheck the "enable protected mode" in Arcobat. The only error Adobe says I can have printing is different from the one I'm getting. Can anyone answer this?

Hi Josh ,
Try re installing the printer subsystem and see if that works.
Regards
Sukrit Dhingra

Similar Messages

Document could not print because no pages were selected to print

I have indicated page 151-200 to print. receive the error above

With the limited amount of information you have provided, its virtually impossible to find the reason behind this issue.
Please provide some more information as below:
1. Your OS
2. The version of Adobe Reader on your system (Help > About Adobe Reader)
3. The printer model being used.
4. Is the issue specific to a certain PDF or all PDFs in general. Does it happen with: http://helpx.adobe.com/content/help/en/acrobat/release-note/release-notes-acrobat-reader/_ jcr_content/main-pars/download/file.res/Acrobat_Reader_ReleaseNote_10.1.4.pdf

I am trying to use Barcode function on Adobe acrobat pro version..I could not figure out..how can i

I am trying to use Barcode function on Adobe acrobat pro version..I could not figure out..how can i autopopulate forms using Barcode from one PDF document( form) to next PDF document( form)..i am missing something in between those?

I have no idea what you are asking - can you be a little bit more clear formulating your question.
Anyway, this is the Adobe Reader forum; you should probably ask in the Acrobat forum.

Adobe Acrobat Pro 9.5.0 will not print SRA3 size paper

I created an Adobe InDesign file 320x450mm (SRA3) and saved it as a a High Quality PDF. However, when I print from Adobe Acrobat Pro 9 with SRA3 paper size settings, it defaults to A4 and the printer will not register the SRA3 paper size request. The tech from Canon updated the printer driver which increased print dialog options such as Paper Handling, Paper Source etc. (which I didn't have before) and spent over an hour running tests. We both agreed there was a software issue since there were not issues from other software:
I can print SRA3 files from InDesign and Microsoft Word, but not Adobe Acrobat Pro.
This is an ongoing problem since I often receive artwork in PDF format at this size.
My workaround is to place the PDF into InDesign, line up the crops by eye and print to SRA3 paper which works fine until I need to do a double sided print which becomes slightly innacurate and often time consuming.
Canon printer driver specs:
V2.0
iR-ADV C5045/5051 PS (UK)

What happens if you select other paper sizes? Also ensure that 'choose paper source by PDF page size' is not checked at your print dialog.
Kindly let us know your results and if possible please forward us your pdf at [email protected]
Looking forward to help you out.
Thanks
-sonal

The document cannot be printed. No pages were selected to print.

I am suddenly getting this message when tryin g to print pdf files. I have tried (Brother) printer driver updates. I have the latest version of Acrobat Reader (11.0.02). I am using Mac OSX 10.6.8
Can anyone help?
Thanks
Robert

I am suddenly getting this message when tryin g to print pdf files. I have tried (Brother) printer driver updates. I have the latest version of Acrobat Reader (11.0.02). I am using Mac OSX 10.6.8
Can anyone help?
Thanks
Robert

When I try to save a form as "Reader Extended PDF" in Acrobat Pro, I get an error message "This document could not be reader enabled".

Hello,
When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
The steps I’m following are described below:
1. Insert electronic signatures
- In Tasks, click on “Add New Field -> Digital Signature”.
- Move the square to the place where you want to put the signature and click.
- Fill in the “field name” with the name of the person who has to sign here.
- When it is done, click anywhere on the screen.
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
2. Save the Form
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
Here's a screenshot of the problem.
Thanks a lot.
Gael

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!

I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Cannot save error, "This document could not be saved. There was a problem reading this doc...(8)"

Cannot save file. Get error message, "This document could not be saved. There was a problem reading this document (8)". What does this mean and how do I fix it? The file opens normally, so how is there a problem reading this document?

Hi MarkStabler,
It appears that your document gets corrupted, try printing the file through Adobe PDF printer and then check the issue.
Regards,
Anoop

How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

What is your operating system? Reader version?
You get this error when doing what?

"This document could not be checked out." SharePoint 2010 checkout action using IE8

I am setting up a two-server farm, and most everything works, except the checkout action for a document. This problem occurs in both site collections, one of which requires checkout, and the other does not.
Here are the options I've tried:
Snow Leopard, Firefox 3.0.1 - works
Snow Leopard, Safari - works
Win 2003, IE 7 - works
XP, Firefox - works
XP, IE 8 - "This document could not be checked out. You may not have permission to check out the document or it is already checked out or locked for editing by another user."
In IE8, I am able to open a document as read only then use the button presented by Word to check out the document. I cannot use that as a workaround, as not all users have a version of Office that will allow checkout in that way.
Checkin works fine. I need to resolve the checkout error.

I was having the same problem mentioned here. I noted that this problem only appears when I use the FQDN in the URL ex 'http://hostname.domain.com/default.aspx'. If I access the Sharepoint site using the URL 'http://hostname/default.aspx', then
I do not have any problems checking files in or out.
I ran into this same error pattern when trying to do a document edit (library is set to force a check out), or do a direct check out via the ribbon menu or item context menu. Oddly enough when we would use the 'Edit Properties' ribbon button (which forces
a check out) we did not get an error and the document's status would change to 'checked out'. Below are the two messages we would receive when trying to do a check out:
IE error message - "This document could not be checked out. You may not have permission to check out this document or it is already checked out or locked by another user." - Click OK
IE Error message - "The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document." - Click OK
After trying several different suggestions I realized that I wasn't having the problem when I was accessing the site locally via FQDN but only when I was using the Public Site URL (via https). Turns out we were getting the error because we did not have
an AAM currectly setup. Once I changed our AAM for the Internet zone with the Public URL value instead of the FQDN the error went away.
Hope this helps anyone else trying to track this down. Oh and this was SP2010 w/SP1 (Patch version 14.0.6106.5001) on Win2008 R2 with clients running both Win7 and WinXP using IE8.

This document could not be registered. It will not be possible..... (MS Word) Windows 7 MS 2010

Recently anything typed in Word is no longer retreivible (randomly). 15 minutes after typing a document, I get:
"this document could not be registered. It will not be possible to create links from other documents to this document."
Sometimes the document has links within in it sometimes not... either way have I select each of the three options and the protected view disappears, and a blank MS Word page comes up. After three times, (with various documents) the program reports,
"Word stopped working and is looking for a solution..."
My research found that I should looking at DCOM Server Process Launcher - making sure that it is in under the General Tab, Startup Type be changed to Automatic...
It is and has been in automatic (and I cannot change it) this is were my problem does not match what I was finding for corrections.
I can change other services and make changes in most tabs, BUT I CAN CHANGE NOTHING IN DCOM SERVER PROCESS LAUNCHER.
Please advise - soon

Check the following article on the error: "this document could not be registered. It will not be possible to create links from other documents to this document."
http://sharepointknowledgebase.blogspot.in/2012/08/this-document-could-not-be-registered.html
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice.
Microsoft does not guarantee the accuracy of this information.)
Refer to the link below on How to troubleshoot problems that occur when you start or use Word:
http://support.microsoft.com/kb/921541
In addition check the following thread:
http://social.technet.microsoft.com/Forums/office/en-US/ade00dbd-4dc1-49ba-89e2-d43af5c85356/word-2010-could-not-create-the-work-file-error-message-when-opening-word-email-attachments?forum=word
Tylor Wang
TechNet Community Support

How do I resolve a "This document could not be signed" error?

How do I resolve a "This document could not be signed" error? I received this error when trying to sign a document with multiple signature boxes. This particular box locks down most of the document. It's normally not an issue, but periodically we have a copy of this same form that does not work.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

This document could not be opened.

Hi,
I have Created a Crystal Report File in VS2005 not when I open VS2012, gives the following error
Crystal reports ver:10.2.3600.0 references are added in the project.
SAP Crystal Reports ActiveX Designer
C:\Users\SHAKIR~1.JAM\AppData\Local\Temp\{67505EDA-9101-4A10-8927-05811521BF36}.rpt
This document could not be opened.
While VS2005 is still opening this file.
Please help.
Best Regads,
Shakir

Hi Shakir,
CR 10.2 is not supported in VS 2012. To update to a supported runtime go to this page and download the first link to integrate into the VS IDE:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
Other links are for redistributing the runtime only, DO NOT install them on your DEV PC.
Only issue is the update wizard may not replace all of the references in the config files so you may have to edit them manually. Or you may have both, replace them with the version 13.x.x.x versions.
Don

Adobe Acrobat Pro 9, "This document could not Printed" then "No pages were selected"

Similar Messages

Maybe you are looking for