Adobe Acrobat Pro Extended | Print Option | Enable Flash Object Issue

Hi,
We are facing some problems with Adobe Acrobat Pro Extended Print Option.
We had a requirement to embed interactive Flash graphs in the PDF file, user will interact with these graphs and whatever graph he plotted, the data for it will be saved in PDF text field, so that on the next launch we can fetch the data to the flash from PDF text fields, so that user can see what changes he did last time. This works great, we are able to successfully comminicate from PDF to flash and then from Flash to PDF.
Please note that, PDF can have multiple graphs on different pages.
The issue we are facing is when we interact with the graphs and then try to print the PDF, in that case only the currently active graph or flash file (The page on which user is currently on) will be seen enabled in the print, the graphs on the other pages, which are not currently visible are seen in disabled state hence the data on it does not get printed.
We have also used the "RMA.activated = true;" command, still no success. Please refer to the screen shots below to understand the issue in more detail..
Flash Embed Options:
In the Print Option, it looks disabled:
The required/desired output is as follows:
We want all Graphs to get printed in enabled state and with the data user had entered. Please do let me know, if there is any workaround to achive this functionality.
Thanks,
Ajit Danve
Sr Developer
Aptara, Pune.

Which version. I think it is a minimum of AA9.2 that is needed for X64. Anyway, you should probably either open Acrobat and do the update (help menu) or download all of the updates from Adobe>downloads>updates and install them in order. The current version is AA9.3.4.

Similar Messages

Problem with Adobe Acrobat Pro Extended version 9.3.4 reading Inventor 2009

I would like to be able to generate 3D PDF files from Autodesk Inventor CAD models (e.g. .iam files) using Adobe Acrobat Pro Extended. I am constrained to use Inventor 2009. When I originally installed Acrobat Pro Extended, I was able to make this work after installing the IMPORT3D update at:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4073
Recently (9/5/2010), I updated Acrobat Pro Extended to version 9.3.4. I believe that following that update, I lost the ability to read in Inventor 2009 files. Acrobat Pro Extended now gives the error messages:
"Exception has been raised" followed by:
"Acrobat could not open 'file' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
This is exactly what happened when I first installed Acrobat Pro extended and before I installed the IMPORT3D update mentioned above. I tried re-installing that update but now the installer gives the error message:
"No qualifying products found to apply this update."
Note that Inventor 2009 does allow one to "Save Copy As" to PDF format, but this just creates a 2D PDF snapshot of the current model view -- same for print to pdf.
I suppose one thing to try is removing Acrobat Pro Extended and then re-installing without the 9.3.4 update, but with the IMPORT3D update -- but if that is necessary, then I won't be able to take advantage of any further updates (e.g. security updates) to Acrobat, which seems like a bad situation.
Has anyone else had this problem? Or is it just me?

I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF. After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files. For example a .ipt file (part file) seemed to convert fine. I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked. Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default. In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

Secunia & Adobe Acrobat Pro Extended 9.3.1

Hi,
According to Secunia, my updated version of Adobe Acrobat Extended Pro 9.3.1 is insecure.
I have clicked on the Download Solution button on Secunia to obtain the latest Adobe Acrobat Version. After loading the latest version, I still have the following information.
Secunia points to the following file: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.dll
And reports that my version is: 9.3.0.148
Yet, when I fire up my Adobe Acrobat Extended and then go Help | About, I see the version is 9.3.1.
When Adobe updates Acrobat, does it leave insecure files behind? Is there anything I can do to ensure that my version of Adobe Acrobat is completely secure? How do I get Secunia to recognize my updated and, I hope, secure version?
Sincerely,
Kevin

Hi Bill,
I suspect that its latest version 9.3.1 is secure, at least for now.
My concern is that, for whatever reason, Secunia continues to think I have a prior version (9.3.0.148).
I had a similar problem with Flash. To solve my Adobe Flash problem, I used an Adobe uninstaller to completely remove Flash and then reinstall the latest version from Adobe web site.
I can't do that with my Adobe Acrobat Pro Extended. I need to get incremental upgrades through the upgrade process.
I have a hunch that the upgrades don't remove all the prior detritus from prior versions and that is tripping up the Secunia security.
I am hoping someone else has encountered the same issues and has found a solution.
Sincerely,
Kevin

How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which makes a PDF of a web page interactive, to work in Firefox 4.0.1?

I just installed (on my Windows 7 Ultimate (64 bit) operating system/Intel i5 CPU M560 2.67 GHz) and am now using as my default browser Firefox 4.0.1 because Internet Explorer 9 was giving me so much trouble--lack of display of web content, lack of PDF reproduction when web content displayed, screwball formatting display, etc., all of which has been remedied by the mere installation of Firefox 4.0.1.
How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which converts a web page to an interactive PDF, to set up and work on Firefox 4.0.1?

You can not do that using Adobe Acrobat 9. Adobe never made a create PDF add-on for Firefox for use with Adobe Acrobat 9. They created a Firefox add-on for use with Acrobat X, but currently that one does not work with Firefox 4 though Adobe are working on an update.

Adobe acrobat pro extended 9 language issues

Hi!
Is there any conflicts/obstacles that may arise using an English version of this software for documents or purposes in other languages or does it support other languages?
If not, is there any way that I can convert an English language version of Adobe Acrobat Pro extended 9 to Swedish language?
The reason I ask is that I'm considering buying a used copy of Acrobat pro extended 9, but before doing so I need to know if I would be better off buying a dedicated Swedish version of this software.
Thanks in advance
Anders

Thanks AbhigyanModi!
What I would like to do with acrobat pro extended 9 is for instance to convert a two-column glossary into Excel keeping the table format. Not sure if using English version will affect the text in the Swedish translation column or not. I've used Acrobat (Swedish version) to a minor extent at work so I'm familiar with some of its benefits, such as the "Copy as table" function.
I think ibuying this software straight from retail is quite pricey for my needs and that's why I considered buying a used English version of Acrobat Pro extended. But I'm not sure it's worth buying an English version if it will limit the useability for my needs.
Cheers!

Why can't i install the adobe acrobat pro extended 9 which i just downloaded?

why can't install the adobe acrobat pro extended 9 which i have just downloaded?

Nobody can know without some system info and a better explanation of what exactly you do...
Mylenium

Adobe Acrobat Pro Extended: Revoke

hi all,
I have got this copy of Adobe Acrobat Pro 9.0 Extended that I installed on computer A. One day this computer A is totally crashed and I can't even switch it on anymore, most likely the motherboard is overheated. So my boss decides to buy me a new computer B, which is of course much better than computer A. I re-installed the same copy of Acrobat Pro 9.0 on to this new computer and got the error of an invalid serial number (attached phiotos). I have rang Adobe and they told me that i need to contact my reseller to issue me another serial number. My reseller told me that the only way is to fix computer A, de-activate the license, and activate it on computer B.
The problem is computer A is totally crashed. it won't even allow me to boot into windows. and now on computer B, the 30 days trial is expired and i cannot use the PDF facility anymore, is there anyway i can do to resolve this? can someone from Adobe please help me out?
contact me if you need more information

You need to select the Activate over the phone option, call the number that appears on the screen and explain the situation to the Adobe representative.
Only they can help you out with this.

Adobe Acrobat Pro Extended Will Not Install

I have the Adobe Master Collection CS5 installed, but needed to use some Acrobat features which I understood were only available in the Pro Extended version, so am trying now to install Extended onto the PC.
The installation however keeps stopping saying I "already have a more functional product installed" ... Acrobat on this PC is the Pro version, but is not Extended ... is there a way to get it to install without removing the current version and all its settings?

Since you have CS5 master collection installed- it comes with Acrobat 9.3 and Acrobat Pro Extended,
that you are trying to install is version no. 9.0. So when you launch the installer, you get the message that you have
more recent product already installed.
For installing Acrobat Pro Extended 9.0, you'll have to deactivate and uninstall Acrobat 9.3 and then install Acrobat Pro Extended.

Adobe Acrobat Pro Extended File Type Support

Is there a list of file types that Adobe Acrobat 9 Pro Extended supports. Looking specifically for cad stuff like microstation, autocad and esri files.
Thanks

Thanks AbhigyanModi!
What I would like to do with acrobat pro extended 9 is for instance to convert a two-column glossary into Excel keeping the table format. Not sure if using English version will affect the text in the Swedish translation column or not. I've used Acrobat (Swedish version) to a minor extent at work so I'm familiar with some of its benefits, such as the "Copy as table" function.
I think ibuying this software straight from retail is quite pricey for my needs and that's why I considered buying a used English version of Acrobat Pro extended. But I'm not sure it's worth buying an English version if it will limit the useability for my needs.
Cheers!

PDFs from Adobe Acrobat Pro not printing with Yosemite

I am unable to print PDFs from Adobe Acrobat Pro 11.0.09 since installing Yosemite 10.10. I have been check-marking "print as image," which worked previous to Yosemite.
I am now printing via the Apple Preview, but despite selecting 1 copy, it is printing 10 of everything.

Hi,
IO must say, it seems to work now without me having to tick the Print as Image box.
This is my version:
Architecture: i386
Build: 11.0.9.29
AGM: 4.28.138
CoolType: 5.11.136
JP2K: 2.0.0.32097

Adobe Acrobat Pro Extended: CSV Export of a 3D-Model doesn´t work

Hello @ all.
I´m using the Adobe Acrobat 9 Pro Extended Tool. Now I want to export a 3D Model in a csv-file. I´ts no problem to export it in a xml-file andnopen it, but if I want to open the exported csv-file, then I see nothing -> an empty excel table :-( If I use a csv-viewer-tool then I became an error, that the tool can´t open the file.
Can anybody help me, or know somebody the solution to this problem?
Maybe have anybody the same problem?
Thanks, Luna :-)
PS: I´m from germany, my english isn´t the best ;-) Nevertheless I hope you understand my problem!

I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF. After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files. For example a .ipt file (part file) seemed to convert fine. I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked. Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default. In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

How do I get Adobe to send me a link to download Adobe Acrobat Pro Extended V 9.x

how do I get adobe to send me a link to down load this version? Adobe pro 9 does not work. I old computer crashed, I lost the hard drive. I have the code, but cannot find the link to download this version. I don't want to spend money for a new version, as this works fine.

I cannot find any download of Acrobat 9 Pro Extended on the Adobe website.
If I were you I would try to find a 3rd-party download site, e.g. via Google. Note that there is no guarantee that 3rd-party downloads are clean or genuine.

Adobe Acrobat Pro extended batch watermarks trouble on 3d PDFS

Hello there
we are very interested in buying a license of your software but we have a few reservations
I cannot get the batch watermark facility to work on a batch of 3d PDF encoded from pro engineer wildfire 2. When i apply the watermark the watermark does not appear at all or behind the object. Attached are screen dumps of the setups from pro extended and the file used maybe you can shed some light on this. This is a essential part of the use of the software and we need to protect our copyright over 1500 pdfs. we are trailing the software at this present moment and looking at buying.
Attached are the following
3d pdf examples from the batch list
CI6019T
AU8001T
AU8005T
BM6017
The watermark
Eecfill7
Screen dumps of the setups (JPG)
Adobedump
Adobe2
The watermark is supposed to be displayed above the 3D PDF, the problem is that it either does not water at all or the watermark is below, any help on this matter would be greatly appreciated.
Kind regards
H Hagley
[email protected]
CAD engineer

You can not do that using Adobe Acrobat 9. Adobe never made a create PDF add-on for Firefox for use with Adobe Acrobat 9. They created a Firefox add-on for use with Acrobat X, but currently that one does not work with Firefox 4 though Adobe are working on an update.

How do I add adobe Acrobat as a printer option in InDesign?

I purchased a new computer (MAC Book Pro) and am working from Adobe CC. I have the option in both chrome and word and I've always had the option in InDesign before so I am not sure how to add it. I have the Postscript option but I would like the ablility to print directly to PDF for those times where it doesn't want to export. - Thanks

Thanks for your response Steve, but Spier is correct I'm looking to add it as a print driver. I can export to pdf fine but sometimes when that isn't working or if I want the file to be compressed further I do File>Print and chose a printer, usually there is an option for Adobe PDF but the only option I currently have is Postscript. Looks like it was taken away. Thanks everyone!

Adobe Acrobat Pro X - Pages options grayed out on PDFs with digital signatures

When we apply a signature to a PDF in Acrobat Pro X, it disables all the options (e.g., rotate, delete, replace, etc.) except for "Extract". This was not an issue with Acrobat v8. Does anyone have a solution to this problem?

That's because all of the operations you mentioned that are disabled, if run, would invalidate the signature. The bug was in version 8 in that we should never allowed the user to modify the signed bytes and break the signature.
Steve

Adobe Acrobat Pro Extended | Print Option | Enable Flash Object Issue

Similar Messages

Maybe you are looking for