Adobe Acrobat Pro XI vs X Accessibility Checks

I have a Adobe Acrobat Pro XI. My client has Adobe Acrobat Pro X. In XI, my documents are completely accessible, but when they run the accessibility check in X they show errors. The client will send documents back to us as non-compliant due to these errors and ask that we fix them. Unfortunately, we are not able to see these errors on our side, so it is very hard to try and fix. Is there a way to run the X accessibility check in XI, so that we make the document as compliant as our client is expecting?

When you run the Accessibility Check in XI, are all of the Checking Options selected, other than "Tables must have a summary"? What specific errors are being flagged in X but not XI? (it might be helpful to ask your client to create and send an Accessibility Report)
Another approach would be for you and your client to agree to standardize on one of the free PDF Accessibility Checkers from the Swiss foundation Access for All: PAC 1.3 for WCAG 2.0 compliance or PAC 2 for ISO 14289 (PDF/UA - Universal Accessibility) http://www.access-for-all.ch/en/pdf-lab/pdf-accessibility-checker-pac/downloading-pac.html.
Both PAC checkers are much more thorough than the checkers built into Acrobat X and XI.

Similar Messages

  • Adobe Acrobat Pro 9.1

    I updated two machines to 9.1 as prompted yesterday. On both machines nothing happens when I try to access
    Help / about Adobe Acrobat 9 Prom Check for updates, About adobe Plug-ins
    Any suggestions welcome

    Sorry I think you have misunderstood. In Adobe Acrobat 9 I ran check update and it proposed download and install of 9.1. I did this on several machines but now when I go to help, and then "about Adobe Acrobat pro" nothing happens, same with check update, no action occurs at all.

  • Attempt to Access Invalid Address - Adobe Acrobat Reader XI or Adobe Acrobat Pro XI

    My spec's:
    - OS: Win 7 Ultimate SP 1 64 bit
    - currently have Adobe Acrobat 9 Pro v 9.0.0 (works fine) - (AA9P)
    - Profile I am installing is an Administrator account
    - All A/V is turned off to include MS Security Essentials real time protection
    - MS EMET is turned off
    I have tried upgrading to Adobe Acrobat Reader XI (AARXI) or the trial version of Adobe Acrobat Pro XI (AAPXI), and keep getting the same debug message "attempt to Acess Invalid Address"
    I have UNINSTALLED AA9P, and THEN rebooted. I then tried to install AAPXI = same debug message. No errors were present during the installation and I also verified the MD5 checksum on the download, so that I getting a complete install package
    I then UNINSTALLED AAP XI, then rebooted.
    I INSTALLED AAPRXI, and received no errors during installation. Again, all installs are ocurring under a ADMINISTRATOR account with all security software disabled. Tried opening AAPRXI and get the same debug message.
    My OS has every available patch installed for both Microsoft and Third Party.
    Any suggestions on how to correct this installation?

    Still no solution to this problem. I went ahead and purchased Adobe Acrobat Pro XI thinking I could always get refunded but maybe it was the trial version?
    I have since taken a number of steps to verify my computer was clean before I installed AAPXI
    -- remotely ran sweeps across my computer using Retina and Tenable Nessus = clean and all available/critical patches installed
    -- running Win7 Ultimate SP1
    -- running latest versions of all third party software (Java, Flash, etc.)
    -- Ran Sysinternal procmon to see if what was going on (will upload to adobe...tons of "NAME NOT FOUND")
    ---- in procmon, I filtered out most of the noise...just need an assist from Adobe Tech
    -- I used the tool above that Claudio Gonazlez identified and removed everything, even my entire Adobe CS4 installation =(
    -- Rebooted
    -- Double checked that all security software is disabled
    ** installed AAPXI with NO installation errors
    -- tried opening AAPXI but get the same error " C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe    Attempt to access invalid address"
    Any help from the community or Adobe? Been trying off an on for two weeks to fix this. Thanks

  • I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. W

    I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. When directed on Adobe's site to access the serial number, it takes me to an outside 3rd party site, which I tried but it does not actually work. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hey beccac85068042,
    Adobe will provide you the serial number only if you are a registered user.
    Please refer the following link to know more on registration for Adobe products:
    Adobe product registration FAQ
    You might Contact Customer Care and seek help on the same.
    Regards,
    Anubha

  • We have adobe acrobat pro installed on our computer  - we have changed the password - but it is still not giving us access to update our adobe reader. The name is showing as Marriner. Is this linked to our account?

    We have adobe acrobat pro installed on our computer  - we have changed the password - but it is still not giving us access to update our adobe reader. The name is showing as Marriner. Is this linked to our account?

    What is your operating system?
    To install/update Adobe Reader or Acrobat you need to supply your computer's Administrator password.

  • Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.

    Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.
    Exact error below:
    error 1321: the installer has insufficient privileges to modify the file C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\I386\[dll file]
    Thanks in advance!

    My first thought is to not just apply permissions to the folder but be sure to apply them to all objects inside them. It would be interesting to see if you can rename this file, then rename it back to its original name; this would test permissions nondestructively.

  • Issue with Adobe Acrobat Pro XI Version 11.1.10

    Using Adobe Acrobat Pro XI version  11.1.10 when I try to delete a page I get an error message, "one or more pages are in use and cannot be deleted". I would like to delete the pages?

    Hi Frank,
    This type of error usually occurs when two or more than two programs are accessing the same file at a point of time.
    Does this issue occur with that specific pdf or with other pdfs too?
    How about if you make a copy of that pdf and then try deleting pages from that copied pdf? Do let me know if that works.
    If possible...Can you mail me that pdf file at [email protected] so that i can check this issue at my end?
    Regards,
    Rahul

  • Problem installing Adobe Acrobat Pro 9

    I have an HP Pavilion dvd6-3033 with Windows 7 Home Premium operating system. Some time ago I purchased and installed the Adobe Creative Suite 5 Web Premium system which included a disc with Adobe Acrobate Pro 9. Everything installed just fine. Recently my hard drive went bad and I had to install a new one. After reinstalling Windows 7 Home Premium I reinstalled the Creative Suite 5 just fine, but the Acrobat Pro 9 installation, after running for a while, produces Error 1311 (Source file not found: F:\Acrobat 9\Data1.cab  Verify the file exists and that you can access it.) I checked the Acrobat9 folder on the installation disc and Data1.cab is there, but apparently the installer for some reason doesn't recognize it. Any suggestions on what to do?

    use the below link:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Does Adobe Acrobat Pro or Reader mount all listed network folders in Mac OS X 10.6?

    I administer several Macintoshes on a managed network. Recently, we migrated most machines to Mac OS X 10.6. Now, when users navigate to a network folder to open a document from Acrobat Pro 9, Acrobat Pro X or Acrobat Reader X, any folder shown in the "Open" window from Acrobat is mounted on the user's desktop. The protocol doesn't matter - the server could be accessed via smb or afp. If the file is held in a network folder near the bottom of the alphabet, all folders that are exposed in the "Open" window mount. Not only does this create clutter and confusion for the user, but sometimes it crashes Acrobat.
    This behavior is present only in Acrobat Reader, Adobe Acrobat Pro 9 and X. No other application, Adobe or not has this affect navigating through the open file function.
    This behavior is present after complete uninstall/reinstalls of the applications.
    This behavior is present in any account – local or network.
    This behavior is present on any Macintosh running Max OS X 10.6.
    This behavior is NOT present in OS X 10.5.
    Can anyone else in this forum duplicate or explain this behavior?

    Hi Onewizard,
    I tried and checked this on different version of Acrobat and Reader however not able to replicate this behavior. I am on MAC 10.6.8

  • Can't open pdf created with Adobe Acrobat Pro

    I can't open a pdf (that was created with Adobe Acrobat Pro) using Reader 11. However, the file will open with an older version of Reader (10.1.4) on another workstation. Is there any way to resolve the problem?

    Reader 11 is not available for general release. If you participated in the beta program, there is a place for this discussion which you have been provided. If you did not participate in the beta program, then you should not yet have access to Reader 11. I have just checked the Adobe website and it is not available to download from there.

  • Unable to print with Adobe Acrobat Pro - latest version 10.1.10

    Hi,
    I have installed Adobe Acrobat Pro on my mac book air version 10.9.2. but am unable to print. When I print a PDF, it shows up in the printer icon as complete but when I go to the printer, nothing is there? Can someone help?

    Hi Frank,
    This type of error usually occurs when two or more than two programs are accessing the same file at a point of time.
    Does this issue occur with that specific pdf or with other pdfs too?
    How about if you make a copy of that pdf and then try deleting pages from that copied pdf? Do let me know if that works.
    If possible...Can you mail me that pdf file at [email protected] so that i can check this issue at my end?
    Regards,
    Rahul

  • Problem with Adobe Acrobat Pro XI after installation on Mac

    I just installed Adobe Acrobat Pro XI on my Mac. My Mac has the correct version of OS and Safari yet I can not launch Adobe. When I launch it, an error box comes up and says a problem has been reported to Adobe.  That's as far as it gets. Has anyone had this problem before?

    Hi lsgahan,
    Please try the following steps and let me know.
    Delete all the files from following folders:
    Library/Application Support/Adobe/SLStore
    Library/Application Support/Adobe/SLCache
    And, delete all files from following folder except cache.db
    Library/Application Support/Adobe/Adobe PCD
    Launch Acrobat and enter the serial number when prompted and check.
    Regards,
    Rave

  • How do I customize Adobe Acrobat Standard DC or Adobe Acrobat Pro DC to do what I'd like?  Actually this a multiple-question inquiry.

    Note, I was unable to find a "How TO", Tutorial, or FAQ relevant to the following questions.
    For instance, how do I easily append to an existing PDF with minimum clicks (which I could do with an earlier version of Acrobat Standard)?
    I'm using a 30-day trial of Adobe Acrobat Pro DC to scan documents and in certain situations, append to existing PDFs.
    I'd prefer to trial the Adobe Acrobat Standard vs. Pro DC because that's what I intend to purchase.  I'd prefer to not get accustomed to Pro if Standard is very different.
    1.  After selecting Edit > Preferences and specifying certain defaults, most take effect as suspected but some do not, like the one's I'm going to elaborate on below.  Why?
    2. Alternatively, is there a Tool or a way to create a local customized Profile and default to that Profile to avoid having to repeat the following steps?
       This should not be confused with the online Profile (or Communities Profile) whereby one states one's Name etc.
    File
    > Create
       > PDF from scanner
         > Custom scan
           > Color Mode: Black and White
           > Append to existing file
             > Browse
               > Select file
                 > Scan
    This is a cumbersome task to repeat each time I'm ready to scan.  Using an earlier version of Acrobat Standard, I'd simply double-click the PDF I wished to append to,
    Acrobat would default to the appropriate scanner, and know that I wished to append to an existing file without me having to select that option.  Presently it doesn't appear to be that easy/simple.
    Perhaps it is (or can be with guidance).  Please assist.
    3. Please find attached the following snapshots/images... CORRECTION, IF ADOBE SUPPORT CONTACTS ME ABOUT THIS, I'LL GLADLY FORWARD SCREENSHOTS.
       Meaning, there does not appear to be a way to include screenshots on Forums.
    3a See Error.  Is there a way to get a more accurate description of the error (i.e., turn on debugging etc.)?
    3b When Creating a PDF, the prompts still seen after clicking "Configure Presets" and changing Color Mode from AutoDetect to Black and White.  Why?
    3c Custom Scan Input, where I changed Color Mode from AutoDetect to Black and White and why I must also tell Acrobat to append AND to browse to a pre-defined default location?
    4. Must I be "Logged in" to use the product?  The first time launching it, I was prompted to login using the credentials used to create the account and download the product.  Now when using the product it appears to be automatically "Logged in" or online.  I would prefer to use it in an "offline mode" if there is such a thing.
    5. Once the product is purchased, what are my support options?  Can questions be answered or issues resolved with a phone call or are they limited to the Acrobat Forum(s) and/or Adobe Communities?  Even after clicking "Ready to contact us?  Start here." I'm only given the Forum option (over and over) vs. Chat vs. Email Support etc.
    If I've posted these inquiries to the wrong Forum or Discussion, if prudent, please collectively relocate them.  Regardless, please advise.  Thanks!

    uninstall all acrobat/reader versions and retry installing.
    or check your log files for more specific help, Troubleshoot install issues with log files | CS5, CS5.5, CS6

  • PDF files opens in Adobe Reader  9 but not Adobe Acrobat Pro 9

    After one of my users digitally signs a PDF file, and saves it, he cannot open it again.
    He gets either a reference memory error or a Font Capture error.
    I can open the same PDF file with Adobe Reader 9 and Adobe Acrobat Pro 8.
    If  I take the same file to a system with Adobe Acrobat Pro 9 - same error on the same file.
    Happens to my administrator account as well.
    Acrobat Pro 9 version: 9.4.1
    Adobe Reader version: 9.4.1
    Acrobat Pro 8 version: 8.2.5
    Windows XP SP3
    IE 7
    Acrobat Pro 9 has been completely uninstalled, the system rebooted, and the software reinstalled.
    Customer's profile has been rebuilt.
    The error message in the event log are:
    Event Type: Information
    Event Source: Application Popup
    Event Category: None
    Event ID: 26
    Date:  1/31/2011
    Time:  12:56:02 PM
    User:  N/A
    Computer: XXXXXXX
    Description:
    Application popup: Font Capture: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".
    or
    Event Type: Information
    Event Source: Application Popup
    Event Category: None
    Event ID: 26
    Date:  1/31/2011
    Time:  1:13:06 PM
    User:  N/A
    Computer: XXXXXXX
    Description:
    Application popup: Adobe Acrobat Pro: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".

    So the option was already checked when opened the document. I went ahead and unchecked, closed, reopened just to test and it's still not displaying correctly.
    In response to Bill@VT. The image is on top of a white background so I can't tell if there is space there or not, it's just all white.
    She showed me another document that's doing something similar today. This time the pdf was done with a green background and now the background shows as white. It was created the same way with Indesign and it shows fine in Reader and the Windows preview pane just not Acrobat. I'm trying to get the user to find the installation media so I can remove and reinstall, but I'm not sure if she will be able to find it.

  • Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

    Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

    Hi,
    Are you facing the issue with any pdf file?
    Please try updating Acrobat to 11.0.7 and check.
    You might also want to repair Acrobat and see.
    Regards,
    Rave

Maybe you are looking for

  • Which to buy

    hello i want to decide between a 13 inch macbook air and a 13 inch macbook pro.i will play latest games ,browse the net,want it to be portable,want to see hd videos and play music.i have 2tb external hdd so storage is not a problem.i also want to kno

  • Cisco ISE version 1.2 (corporate owned)

    Hi Guys, We are deploying Cisco ISE with version 1.2, one of  our requirement is to identify the corporate and personally owned  devices. Is there a feature in ISE with this requirement? Thanks.

  • Abap oop's

    Hi all, REPORT  zinheritance.       CLASS counter DEFINITION CLASS counter DEFINITION.   PUBLIC SECTION.     METHODS: set IMPORTING value(set_value) TYPE i,              increment,              get EXPORTING value(get_value) TYPE i.   PROTECTED SECTI

  • Add IP Printer through UNIX Command in Remote Desktop 3

    Thanks for reading, I use RD 3 to administer 5 schools in my district. In my elem. schools, I use local logins, and would like to install printers through Command Line I cant find it anywhere online. PLEASE HELP! Do I use the lpadmin command ex lpadm

  • Controlling the Syncing of iTunes to iPad

    I have e-books that I store on an external HD and use iTunes to sync them to my iPad. Once I have them in my iPad I don't need them in iTunes anymore - so I delete them in iTunes - I want to free up this disk space (I don't read these ebooks on my Ma