Adobe Acrobat Updater said there was an update.
I accepted and it has stalled. It opened a dialog box called Repair setup that says there are missing components and had a check beside a box that says it will reconfigure the Adobe pdf printer. Now everything is stalled. I can't cancel the update or the Repair setup dialog box. It won't quit. There is no option for a force quit. I can't restart the computer because Adobe cancels the restart. What do I do?
Try the Adobe forum area, since it is their product you are having issues with.
Similar Messages
-
I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?
Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh -
hi, i purchased and downloaded the lr6 desktop app (updating from lr5, paid 80. for the update), and used my serial number from the email from adobe sentbut it said it was only eligible for lr5. thanks, rich
If you purchased an upgrade from LR5 to LR6 then after you enter your LR6 serial number, you will need to enter your LR5 serial number, unless LR6 finds LR5 on the computer. This also assumes that you've purchased the perpetual license of both LR5 and LR6, not a cloud license for LR5 which doesn't use a serial number for licensing. If entering a LR6 then LR5 serial number into LR6's serial-number area isn't working, then is there something special about the LR5 that would make it ineligible for an upgrade?
-
okay I'll tell you the whole story; okay, I had this "1" on my settings icon and in my updates, it said there was a new software, I read a bit about it, and it said I needed 50% and needed Internet connection, so I turned on our "wifi" box. it said I can install so I pressed it. and then the Apple logo came up in the middle of the black screen with a loading line below it. so I left it for about 1 hour or so, and came back and it was half way, so I left it again of the same amount of time, and when I came back it had the computer side of the white cord that you get with your IPod and an arrow pointing towards the ITunes Icon, so I guessed that I had to go to ITunes so I did, and it told me to restore my iPod, I didn't know what that meant so I clicked Restore and Update, and up the top of the screen it said it was "extracting" and then a alert came saying there was an error, so I I clicked "ok" and then my IPod went to a black screen and the Apple Logo appeared in the middle of the screen again, I left it for 1 hour and came back it hadn't changed, so I left it over night on charge and in the morning it hadn't hanged, so I took it off charged for the rest of the day, and it said it needed charge, so the black screen and the apple logo must have taken away charge, so as soon as I plugged it into the computer again, it went back to the black screen with the apple logo, so now it wont even let my reset my iPod, so now I have to see if it is fixable, if it is not I blame the instructions IOS resolving thingy, and get a new iPod or spend a lot of money fixing it, I would trade it, but I doubt my folks would let me, so thanks a lot, if you know any way of fixing my iPod please "please" PLEASE! help me, it would be greatly appreciated, if I don't get it working I may loose friends, because my iPod was for some of my best friends the only way I stay in contact with them. Thanks so much for reading.
Do you memeber the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My Ipad said there was an update. It asked for a network name and i typed my e-mail network name and password. Now I have a locked frame where it says Another network - name (my network name) safety - WPA2 password - my internet password. Now it is frozen - when i press button it says Ipad not adjusted - continue? and nothing happens alt all. I can't get away from this screen. Please help
Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally. -
I went to back up my iPhone4 and it said there was an update. So I clicked on 'update and backup' (or something close to that.) It took FOREVER...way longer than usual. When it was done, it showed the power cord w/an arrow to iTunes. ***??? I restarted my computer and tried the whole process again and still...the power cord with an arrow to iTunes. And I know this means I have to go to Apple and get another phone and will lose anything that wasn't backed up. Anyone else have this happen or have a solution so I don't have to do a restore???
Reboot your computer.
Disable your antivirus and firewall.
Connect the phone to a USB port directly on your computer, not to a hub. If your computer is not a laptop and has ports on both front and back use a port on the back.
If iTunes does not recognize the phone when you connect it see: http://support.apple.com/kb/HT1808
If it STILL doesn't work open a command window and type:
netsh winsock reset
Then try again. (It seems that a recent Microsoft Windows update may have corrupted network settings; this restores them to the factory default).
BTW, was there an error number associated with the failed update? -
I need help, I pluged my iphone to itunes and got a message that said there was an update to download and update, I did but when itunes was rebooting and updating I got an error message. and now the phone is telling me that it cant be activated, to plug it in to itunes or to contact support care.
That message usually indicates that your phone was hacked to unlock it from the original phone carrier, then when you updated or restored it locked back to that carrier.
-
I Was trying to update my apps when i got a sign in required alert,
i signed in and it took me to my account settings ]it said there was a prob with a previous purchase and i havent purchased anything?http://support.apple.com/kb/ht1808
-
I started the download for the itunes update, but before it completed, it said there was an error. I then went to open itunes, and the message came up that itunes was not installed on my computer. Did I lose everything?
Hello llblake,
Fortunately, the process of installing or updating iTunes should not affect your library. The following articles can help with getting iTunes properly updated and stabilized.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?
Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60) -
Dear Sir/Madam,
Adobe acrobat claims that there is an update.
However the update process is very flaky and unreliable.
Very poor service, with useless update prompts.
System report is attached.
Please fix the update, before advertising useless prompts for updates, for paid versions.
ThanksNothing is attached.
You should also be aware that there are a number of scams and malwares claiming fake updates.
Please post your report and tell us exactly what product and exact version you have.
And be aware you aren't talking to Adobe. -
I plugged in my iPod and it needed an update. Before the update could complete it said there was an error and then closed the window. Now my iPod is stuck in the loading screen and won't register in iTunes. Please Help.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I was in the middle of the new update and it said there was a error and now my ipod touch will not turn on or off or anything it is just a picture of the apple.
thank you
KristyError 11 is a strange one...if you search the discussions for error 11 you will get a number of hits but none with a real resolution other than getting the iPod to restore, which you have done. And one person indicates this does not appear in the support data base...already found that out.
If you have restored, have a backup and can restore from that, you might try the update again, or wait for the next update whenever that comes out.
Not a very satisfactory answer but if it is working again... -
Whilst synching to my PC it said there was a software update for the iPhone.
It is now stuck with a message saying connect to iTunes. I've tried resetting it in various ways but it still comes back to Connect to iTunes, but it won't.
Help!See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work.
Maybe you are looking for
-
How to create a inline message for report region...
Hi, Can any one pls tell me the document link for to create a inline error message for report region? im trying to do a dynamic validation for report region.i've manually created a report region with apex item. im searching it for long time, im cant
-
How to use Automatic Row Fetch programmatically ?
Hi I like to use Automatic Row Fetch (AFR) of APEX to populate data into a DML form page by clicking a button with a defined where_clause, and like to update the record accordingly as we did in Oracle forms execute_query procedure. I prefer Oracle pr
-
Simple Question, Easy Solution?
Ok, i need help doing one thing. I have created a file with about 500 images in it. The problem is that I put the wrong images and some are duplicated. hence, I want to replace all of the images with images that I now have. Ultimately, is there ANY w
-
I want to know how to increase the size again?
-
Downloaded the latest version of itunes now i am getting a runtime error R6034
I downloaded the latest version of itunes and now when I try to open it I am getting a Runtime error R6034. What can I do to fix it?