Adobe Acrobat X PDF Printer not printing to Network Share

Until recently we have been able to print to PDF onto a network share/drive without an issue.  Now it does not work, and we are not sure if it is an antivirus blocking it or perhaps an Adobe update, or even a combination of the two.
We can print to PDF fine to a local drive, or with an older version of Adobe Acrobat (8 or 9), just not with X.
Has  anyone encountered this issue, or have any insight on what might be a solution to our problems?
I have tried disabling all the antivirus services, but that had no change.
I also reinstalled Adobe Acrobat X to see if it would work.
Lyle

I have just tried this, i.e.,  printing to a network shares (in this case a network share many miles away over a wireless internet connection from a hotel on Windows 7 64-bit and Windows Server 2008 64-bit), and have not been able to reproduce the problem.
Please provide the particulars of your network shares. For what it is worth, the Adobe software simply creates and writes the file to whatever location you point to. It doesn't even know if the destination is local or remote or anything to do with the network topology if remote.
You might also want to check any firewall software you might have installed to make sure that it is not blocking these remote file operations from Acrobat or any of its components.
          - Dov

Similar Messages

  • Adobe acrobat 9 pdf files wont print wirelessly using Snow Leopard

    I am unable to print wirelessly adobe acrobat 9 pdf files using Snow Leopard.  Yet I have no problem printing word documents wirelessly.  Adobe techs haven't been able to assist.  Hoping someone out there might have a fix.
    Jeff

    Jeffrey Livingston wrote: 
    I am unable to print wirelessly adobe acrobat 9 pdf files using Snow Leopard.  Yet I have no problem printing word documents wirelessly.  Adobe techs haven't been able to assist.  Hoping someone out there might have a fix.
    Jeff
    I am able to use Acrobat using a wireless router.
    Try the following:
    Get the latest update from Manufacturer. Then go to printer setup utility and remove the current version. ( Do this anyway even if the same version).
    Next plug Printer into a direct USB Connection. Now install Driver. Go back to Printer Setup Utility. and add Printer.
    Now print a document, to verify printer works.
    Now quit application, then shut down Computer.
    Now switch usb printer connector from USB connector on computer to USB connector on your router.
    Restart Computer.
    Now open an application that uses a printer and open a document. go to Printer and Look for the Following:
    Disregard the printer I have listed here that's my printer. If you see a Printer like this add to list by choosing the printer.
    Now go to Printer Setup verify it has been added. Make it the Default printer.
    Now Acrobat "should" be able to print from you printer.
    (Please note information is given by an Experienced User of Acrobat. I am not an employee of Adobe.)

  • Adobe Acrobat Pro text box not printing and is hidden under box highlight.

    Adobe Acrobat Pro 10.1.13.  I am completing a form with text box throughout the document. I can no get the text box to printing and the text is hidden under box highlight.  I have tried printing with the print feature 'Comments & Forms/ Document and Markups' with no luck.

    It's doing that because you have field highlighting enabled. YOu can either turn it off or make the field read-only (if it's only used for display and not entry).

  • Adobe acrobat-create pdf addon not compatible for firefox 37.2

    after I installed firefox 37.2, the previous adobe acrobat reader, viewer and pdf creator are suddenly unable to use. the error message is "incompatible with firefox 37.2. If so, please ask adobe whether they are able to tell me where to install the compatible addon.
    I would like to know how to update such addons. Or, maybe I should downgrade my firefox version to older ones just so I can use the addon. If so, please advise how to downgrade the firefox version.
    thank you.

    I can't tell what version of CreatePDF you have, but version 2.0 should still be working. I think version 1.2 stopped working a while ago.
    Your Adobe Acrobat plugin has a peculiar version number, according to your More System Details, of 15.7.20033. The expected value is 11.0.10.32.
    Could you investigate that further by typing or pasting '''about:plugins''' in the address bar and pressing Enter. This should load a long page listing details about your plugins. If you use the Find feature (Ctrl+f) to look for '''nppdf''' can you find an entry with that version number? Is it in an odd location? The normal location for Adobe Reader would be similar to:
    * C:\Program Files (x86)\Adobe\Acrobat 11.0\Reader\browser\nppdf32.dll
    * C:\Program Files (x86)\Adobe\Acrobat 11.0\Reader\Air\nppdf32.dll
    What do you find?

  • Adobe Acrobat X Pro will not print .pdf on HP printer

    Help!  I have not been able to print a .pdf file from my HP Officejet J6480. Each time I sent the file to the printer it acts as if its going to print and then I get a paper jam error but there isn't a paper jam. I am using an HP TouchSmart 610 with Windows 7.

    Several things to consider. You might try to print as an image. There have long been problems with the HP printer drivers also, so you might try to be sure you have the latest. One characteristic of a lot of HP printers is that the page size must match the paper in the printer, or the printer waits for you to fix the paper issue. So be sure the paper size stated in the printer is the same as your PDF, or at least the paper selection made in the printer menu.

  • Need help!  Adobe Acrobat 9 Standard will not print to printer, only want to print to prn file.

    I have done a repair on the file,  I have installed the lastest updates, and nothing works.  My next step would be to uninstall and reinstall the program.  Does anyone have a fix for this?  I have always been able to print PDF files and this just started this week.
    Thanks for any help!

    Nothing is broken, and uninstalling will probably not help.
    You have an option PRINT TO FILE in the print dialog and you must turn it OFF.

  • Adobe Acrobat 9 Pro do not open when printing a pdf document. Can anyone help?

    Adobe Acrobat 9 Pro do not open when printing a pdf document, instead I open it with Adobe Reader X to be able to print.
    Can anyone help?

    Hi Edna,
    It sounds like Adobe Reader X is your default PDF file handler. Launch Adobe Reader X.  Choose Edit > Preferences > General.  Click the 'Select Default PDF Handler' button at the bottom and choose Acrobat 9 from the drop-down menu.  Click Apply, then OK.
    Restart your computer.  Acrobat 9 should now be your default PDF file handler again.
    -David

  • Help!  PDFs are not printing because adobe reporting that postscript conversion needed?

    Help!  PDFs are not printing because adobe reporting that postscript conversion needed?  Can someone help me?  Please?

    Please give us the complete error message, every word. This is not a familiar symptom.
    Also: What software and version are you printing from? What system do you have?

  • Adobe Acrobat - Create PDF 11.0.7 plugin | extension is not working at all in Google Chrome

    - I enable it on chrome://plugins/
    Adobe Create PDF - Version: 11.0.07.47
    Adobe Create PDF plug-in for Chrome
    - I enable it on chrome://extensions/
    Adobe Acrobat - Create PDF 11.0.7.52
    The icon is still on/light in the bar but when I click on it and select "Convert Webpage to PDF...." nothing happens...
    Google Chrome Version 37.0.2062.124 m
    Abobe Acrobat Pro 11.0.07
    Windows 7 64bit
    (Firefox plug-in is working fine)
    Message was edited by: July Z

    I have the same problem for a couple of months, and I had to use a plug-in in Firefox to print a web page. I really need the web page address in the footer for reference purposes which Chrome print (Ctrl+P) does not produce.
    The error message is: A supported version of Acrobat could not be found. Please install or update Acrobat to 11.0.9 or higher."
    After updating to Acrobat 11.0.10 and repairing the installation the problem did not go away.
    Deleting and re-installing the extension did not help either.

  • Adobe Acrobat Reader 10.1.2 Print Issues - Windows Crash Error (2 Sided)

    Have recently had issueswith our upgrades from 10.1.1 to 10.1.2 in regards to the following:
    When printing 2 sided on a Fuji Xerox Firefly C4400 Atheros, application crashes after printing first 4 pages.
    Thus, have tried the patch fix that was recommended on cpsid_92870 however this has not fixed the problem.
    Have also tried the solution with the duplexing but still same issue, Windows crashes.
    Have also tried solution to remove Windows patch KB4332667 and still same issue.
    Screen shots will be provided upon request with the errors.
    Currently running:
    Windows XP SP3
    Adobe Acrobat Reader 10.1.2
    Printer Drivers are the latest and over 500 users on network. 485 are working on 10.1.1 which do not have this issue.
    Is there any solution or 10.1.3 patch release that will address this issue?
    Last Adobe user to work on this was Atul.

    Sonal2890, thanks for your inquiry and I will try to provide as much information as possible.
    1. What happens if inspite of using 'Print on both sides', you check Duplex setting from Properties dialog (As you do previously)?
          The Adobe Reader X Shuts down and is unable to print and displays a message stating it has incurred a problem. Please note, we are running IE7.
    2. What happens if you print with any other application (Word/notepad)
         The documents print fine. IT is only when you print this particular document which is enabled in protected mode and double sided. Have tried the patch and the resolution of unticking the duplex methodology and the issue still persists.
         Crash Logs have already been submitted already. Have added the SEnd Error Report that was provided when the error occurs. The PDF stopped printing after page 6 of a 236 page document and provided the error above.

  • PDF's not printing to Epson R1900

    Posted problem awhile back. PDF would not print to my Epson R1900. Downloaded umpteen different drivers. I am on a G5 Intel Dual Core running OS 10.5.6 or 10.5.7 since yesterday. Adobe very little help, Epson likewise, although I talked to an Epson Tech for about 45 minutes one day.
    Decided I had to fix this myself. When in the Print window Click on "Advanced", check mark "Print as Image". This enables printing the PDF.
    Adobe has a note about this on their website now.

    Thank you!!!
    I recently noticed that when using the Gutenberg drivers on my Epson Stylus Photo 380, it was shrinking the pages slightly.
    So I decided to update the Epson drivers, and use them instead.
    After updating, I could no longer print over my network. It was making my crazy. I tried everything that I could think of.
    I saw your post & tried it. Perfect, worked like a charm!
    And such a simple solution.
    Thank you.

  • When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

    When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
    I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
    WGC

    What's the name of the file you are attempting to open?  Is it "ScreenFlow_4.5.2.dmg"?  If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension.  Adobe Reader opens PDF files an not any other file type.

  • Adobe Acrobat -Create PDF 1.0 does not work in FireFox 4.How do i directly convert pages to PDF??Why is that your products are not backward compatable.U people are in the IT industry and should know this.Shame on You people.learn somthing form the IE team

    While Updating to Fire Fox 4. It said Adobe Acrobat -Create PDF 1.0 is not supported.How come 3.6 supports but not 4. I believe you people have never heard of the term "Backward Compatibility" .U people will loose your customer/support base if every new version doesn't support some existing stuff.

    '''Problem Solved FINALLY !'''
    Solution:
    I just updated my '''Adobe Acrobat X Pro''' to '''Version 10.1.0'''.By the way, I have to complain, Adobe is really slow in solving this problem...
    Here is the official link for the Adobe Acrobat update.[http://www.adobe.com/support/downloads/detail.jsp?ftpID=5135 <click me!>http://www.adobe.com/support/downloads/detail.jsp?ftpID=5135<click me!>]
    After update, the extention changed from "Adobe Acrobat -Create PDF 1.0" into "Adobe Acrobat - Create PDF 1.1". And the '''"Adobe Acrobat - Create PDF 1.1" is compatiable with the firefox 4.0.1'''. A screenshot is attached as a proof.

  • My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

    I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

    Mylenium
    Thank you for the suggestions.
    I checked the WIndows log files. It reported the following error:
    The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 4770
    Start Time: 01d0079a09bba381
    Termination Time: 13
    Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
    Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
    I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
    Thank you.

  • PDF Files not printed

    Dear all,
    r12.0.4.
    solaris 5.10
    bash-3.00$ which pdf2ps
    /usr/bin/pdf2ps
    I can able to print text files in the printer properly. When am printing PDF files am getting
    the error :
    PDF Files not printed
    128mb Of Memory Is Required To Enable Direct Printing
    For which, I followed the note :
    128mb Of Memory Is Required To Enable Direct Printing- 742579.1
    As per the note, file pasta_pdf.cfg is changed to
    bash-3.00$ diff pasta_pdf.cfg pasta_pdf.cfg_orig_Mar17
    122c122
    <         #preprocess=pdftops {infile} {outfile}
    preprocess=pdftops {infile} {outfile}124c124
    <          preprocess=pdf2ps {infile} {outfile}
    ; preprocess=pdf2ps {infile} {outfile}Made the following change in arguments of PASTA_POTRAIT
    FROM
    -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIESTO
    -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfgBounced concurrent managers, still we are getting the same error.
    Any idea ?
    Kai
    Edited by: KaiS on Mar 18, 2009 3:13 AM

    Kai,
    Do you have pdf2ps presented in the PATH of applmgr user?
    Did you run the concurrent program with (number of copies = 1)?
    Regards,
    Hussein

  • Adobe Acrobat Pro X will not open PDFs

    Hello,
    My Adobe Acrobat Pro X will not open PDFs.  This happens twice a month and is becoming extremely irritating.  I have tried uninstalling, reinstalling, repairing and a system restore.  What can I do to make this problem go away?
    Thank you.

    To check that it is an Acrobat problem, open Acrobat from the programs list and try to open a PDF from the file menu. I suspect this will work fine from what I read into your post. I suspect that somehow your OS is changing file associations. In that case, right click on a PDF and select Open With>Select Default Program and then select Acrobat. Be sure the check box for default program has been checked.

Maybe you are looking for

  • How to store numbers in a stack....

    hello guys...i ve got the following assignment: Write a Java program that reads and evaluates a fully parenthesised arithmetic expression. The purpose of this program is to illustrate a fundamental use of stacks. Implement the stack using Linked List

  • Cracked my 13inch macbook pro screen

    The other day, I had a migraine (another story) and due to my unclear vision i stepped on my silver macbook pro 13 inch. Now I remember hearing a crack but being completely delusional and in huge amounts of pain I didnt acknowledge anything. Now late

  • Storing data in the cloud

    Is there a good reliable website for storing a large number of photographs in the cloud but with a database search facility?

  • How can I flash my Windows Mobile 6.5.3 ROM to Firefox OS?

    Hello. I am the very last user running Windows Mobile 6.5.3, the old and abandoned operating system by Microsoft. As a Mozilla's enthusiast, I am really interested in using Firefox OS, however I can't find any ways to install such OS into my phone. M

  • PSE8 Organizer won't start - no message.

    I get welcome screen and click on Organizer.  A few flashes on Hard disk but nothing happens.  I clicked on Editor and it comes up fine.  Clicked on top right Orgnizer button in Editor and it gives no response, no hard disk lights or nothing.  Do I h