Adobe Acrobat XI Miniaturseiten einbetten?

Hallo,
wir erstellen PDF-Dateien-Zusammenstellungen aus verschiedenen Quellen, zumeist Pläne, die gescannt oder vektorisiert sein können.
Diese Dateien können schon des Öfteren 500MB bzw. 100 Pläne überschreiten.
Über die Seitenminiaturen kann man einzelne Seiten auswählen, allerdings ist der Aufbau dieser Minuaturseiten extrem schleppend.
Man hat zwar die Funktion "Alle Miniaturseiten einbetten" zur Verfügung, aber irgendwie passiert nichts.
Habe ich was übersehen?
Vielen Dank im Voraus für Hinweise.

Thanks for the advice.
The problem is not solved. This is what i have tried.
Attempt 1.
Log-in as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
"Repair" Adobe Acrobat XI Pro installation.
Same failure as described earlier.
Attempt 2.
Log-in as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
Uninstall Acro XI Pro.
Run : acrobat_ittools_cleaner_p1_040612.zip
Log of "cleaner" shows deletion of very many, but ot all, Registry Acro-associated keys.
At end of uninstall and cleaner processes, re-start machine.
Log-in again as Administrator via "CRTL-ALT-DEL" twice at the Welcome window.
Disable Norton 360 and Webroot Secure Anywhere prior to Acro XI Pro installation.
Re-install Acro XI Pro (this time, for "Default" choice, as opposed to "Complete" in previous installs.)
Outcome: NO Adobe PDF printer. HOWEVER, both during the "Repair" and re-install processes, a message did flash: "Creating the Adobe PDF Printer".
Both Repair and re-install: The Adobe PDF printer is not listed under "Manufacturer" when "Add Printer" is executed (see image below).
Proceeding via "Have Disk", C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf, yields the failure to install the driver previously described, for all ten (10) instance of the Adobe PDF Converter options.
Thanks for any insights.

Similar Messages

Adobe Acrobat 9 Pro mit Darstellungsfehlern

Hallo zusammen,
wir haben in der Firma vermehrt Darstellungsprobleme mit dem Adobe Acrobat Pro 9.4.4. Dies äußert sich wie in dem angehängten Scrennshot mit verzerrten, "verschluckten" Schriften. Ein Error wird dabei nicht generiert und unsere User starten das Programm dann neu - bis der Fehler eben wieder auftritt.
Eine Neuinstallation der Software hat leider keinen Erfolg gebracht.
Bin für jeden Rat dankbar! Eventuell hatte jemand genau dieses Problem schonmal und weiß die Lösung dazu.
MfG
Michael Müller
Theo Förch GmbH & Co. KG

Ich würde mal sagen, ihr habt eher ein generelles Problem mit Schriften auf euren Systemen.... Der Fehler sieht genau nach dem Szenario "Lokale Schriften verwenden" in den Voreinstellungen aus, aber ihr verwendet vermutlich eben irgendwelche uralten TrueType/ PostScript Type 1 Schriften, die Unicode-Probleme verursachen. Zumindest stimmt mich bei meinem Testguck das Auftauchen von "ArialMT" etwas betrüblich und bestärkt mich in meiner Meinung. Außerdem könnten hier Dinge wir Systemspracheinstellungen eine Rolle spielen, um so mehr, wenn ihr vielleicht noch zwischen WinXP, Win Vista/7 und Mac hin- und herhüpft. Längerfristig wird sich das nur durch Vereinheitlichung des Schriftbestandes lösen lassen, also eine umfassend ausgebaute OpenType Schriftfamilie lizenzieren und diese auch sauber in die Dokumente einbetten.
Mylenium

How do you deploy adobe acrobat xi from creative cloud for enterprise?

Hello,
We purchased Creative Cloud Enterprise and our new supervisor wants adobe acrobat on all computers. I downloaded the package through Creative Cloud and used the customization wizard to customize the msi in the exceptions folder just like the instructions said. I followed the steps and deployed it out using Dell Kace. When a user tries to open Acrobat, it tells them they have a trial version and they must register the product. The instructions for the customization wizard said not to put the creative cloud serial number into the customization tool. Is there something I'm missing with deploying adobe acrobat and creative cloud?
Thanks,
Michael

I'm not a CC expert, but I think normally admins configure Acrobat and then deploy everything via the Creative Cloud Packager. Acrobat certainly needs to be licensed, so when you only have a CC license, it's best to deploy in a standard way so that Acrobat get serialized with the license you have.
19 Creative Cloud Packager Installs — Enterprise Administration Guide
hth,
Ben

Can I create PAdES signature using Adobe Acrobat 8.0 or 9.0?

Hi
Can I create PAdES (PDF Advanced Electronic Signatures, Technical Specification ETSI TS 102 778) signature using Adobe Acrobat 8.0 or 9.0?
ETSI Technical Specification (TS) 102 778 contains five parts:
• Part 1: PAdES Overview – a framework document for PAdES
• Part 2: PAdES Basic – Profile based on ISO 32000-1
• Part 3: PAdES Enhanced – PAdES-Basic Electronic Signatures and PAdES-Explicit Policy Electronic Signatures Profiles
• Part 4: PAdES Long Term – PAdES-Long Term Validation Profile
• Part 5: PAdES for XML Content – Profiles for XAdES signatures of XML content in PDF files
All five parts were published on 31 July 2009.
Thanks for answer.
Dragan

Hi,
The short answer is yes.
Acrobat 8 and later support all of requirements of PAdES such as serial signing, long term validation (time stamping and embedded revocation responses) and signatures in the PKCS#7 format.
Steve

Why is default scan in Adobe Acrobat 9.3.1 legal size

I have HP LaserJet with new software. I scan directly from Adobe Acrobat 9.3.1 (Windows 7, 64 bit). The only scanner I can find in dropdown is WIA. I do not see the twain driver - even though I can scan with twain driver in the HP scanning application. The problem i am experiencing is that when I scan directly from Acrobat (using the only dropdown available - WIA - ) the scan is "legal size" and not "letter size." The only option for paper size is to select paper size automatically.
I would very much like to be able to scan directly from Acrobat and have letter size documents appear as letter size documents. Please help.

Try this, it worked for me in Acrobat v.8
Start an Acrobat scan.
In "Acrobat Scan" window select "Scanner Options"
In "Scanner Options" window select "User interface: Show Scanner's Native Interface"
Click OK on "Scanner Options" window
Click Scan on "Acrobat Scan" window
Next you will be asked to save the PDF file. After this a window should open that gives you an option to select paper size and document type.
I found locations in my HP Printer/Scanner to set paper size but I don't think the information is passed from the printer to Acrobat. I suspect it is an HP problem but they are total dolts about doing anything but pointing the fingure at Adobe.
Hope this works for you. It is very cumbersome but it yields the right results.

Saving a Form created in Adobe Acrobat 9 Pro

We create forms for the company to use with Adobe Acrobat 9 Pro, but because others do not have Acrobat 9 Pro they can not save the document after they have filled out the form. This is causing a big issue for us. Does anyone know a way that we can create a Form in Acrobat 9 Pro that allows others to fill it out using just the plain version of Adobe (guessing they only have Reader) and then they can save it to their desktop?

You need to apply the Extended Reader Rights to it from the Advanced menu in
Acrobat.

Getting overprint preview preference in Adobe Acrobat 9

Hello,
yesterday I installed the Adobe Acrobat 9 Trial and I tried my plugin.
Does anyone know how to get the overprint preview setting?
In older version of Adobe Acrobat I'm using following code:
AVAppGetPrefBool(DSAVSettings[prefNumber].m_section, DSAVSettings[prefNumber].m_name, (ASBool)DSAVSettings[prefNumber].m_requiredValue_9);
m_section is "Originals" and m_name is "OverPrintPreview".
In Adobe Acrobat 9 it always returns the default value m_requiredValue_9 which means that the setting can not be found?
Do I have to change the value of m_section or m_name or do I have to use an other method?
Thanks for your help!
Christian Wiesbauer

I'm having a problem with securing specific fields. Not sure if that can be done. I have a form that I created in LiveCycle Designer and the forms contains fields that create a basic calculation for example (Qty+Price=Total). I want those fields to be field out by our sales people and I want them to save the form with the info. field in and email to customer as a quote basically, but I don't want the customer to be able to change those numbers, but I do want the customer to fill in other portions of the field. Having a problem doing this cause Acrobat is only letting me secure the whole form and not just portions. Is there a way to only secure portions of a form. Please help ASAP.
Thank You

AutoCAD Revit Architekture 2010 in Adobe Acrobat 9 Pro Extended

Hallo,
wer kann mir weiter helfen?
Wie bekomme eine AutoCAD Revite Architekture 2010 Datei in Adobe Acrobat 9 Pro Extended?
Ich möchte eine 3D PDF herstellen!
Vielen Dank im Voraus.
Beste Grüße
Jörg P.

Vermutlich gar nicht, soweit ich die Infos überschaue. Bestenfalls als DWG exportieren und dann in Acrobat importieren. Da ADesk aber das Format jedes Jahr erweitert/ ändert um allen anderen den Spass zu verderben, gibt's dafür keine Garantie. SAT könnte auch funzen. Ansonsten gibt's sicher irgendwo ein schnuckeliges Export-Plugin für sowas zu kaufen...
Mylenium

Centering Headers and Footers in Adobe Acrobat 9

I've read past posts about the inability to center a multi-line header or footer in Adobe Acrobat 9, and the fact that it was not fixed in Acrobat 9. Is anyone working on a fix, other than manually entering spaces to center the header or footer? The frustrating thing about attempting this manual fix is that the preview one sees while entering the header/footer information DOES center the text, so that one does not have an accurate view of what will show on the page. I know that one of the suggestions is to add this information before converting the document to Adobe Acrobat. However, this occurred in a document I scanned using HP software, in which I requested that it be immediately converted to a PDF. Unfortunately, as far as I can find, HP does not keep the original scan (unlike PaperPort), so I'd have to re-scan the document. In the future, I will convert to Word, add the header, and then convert to PDF.
Thanks!

You can use the Watermark feature.

Working with percentages in Adobe Acrobat 9 Pro

So, I have a quick question. I am new to working with forms in acrobat, and am having a hard time figuring this part out. If anyone can help me, I would greatly appreciate it!
So I have a form that I've created in acrobat 9 pro. Below I have listed "individual 1:" and then "percentage allocation". The "percentage alloctions" are the different form fields for the percentages I've created. For each form field, I limited the values to not exceed 100%. I want individuals filling in this form to be able to fill in the percentages by each of the names without the TOTAL percentage value (of all three together) going over 100%. But...the trick is, I don't have a separate "Total" form field, there's no room for one. So is there a way to make it so the total of the three equals 100% without having a "total" form field?
individaul 1: percentage allocation
Individual 2: percentage allocation1
Individual 3: percentage allocation2
Please let me know if this makes sense,

Try67,
Thank you for sending me that reference guide, that will help. This is extremely frustrating for me. Thank you for the field visible or hidden script...I did end up finding those yesterday, just didn't know how to incorporate them to become visible if the total number is less than 100.
I ended up creating another text field right next to the total, and called it "statement". I marked this field as "hidden" through the general properties option in the adobe acrobat dialog box. And , I set up default text to read, "Total value must not be less than 100%". All of this, I did through the properties dialog box.
Individual 1: 30
Individual 2: 20
Individual 3: 10
Total: 60%             "statement" text field is here.
I figured what I could do is add another "if statement" to the validation script I put in for the "Total" text field I already had (below)..don't know if that was a stupid thing to do or not, but didn't know how else to do it. And where it says getField, I added the "statement" text field (the one that is hidden), thinking it would just get that field, but it's not working, what did I do wrong?
var total = Number(getField("individual1").value) + Number(getField("individual2").value) + Number(getField("individual3").value);
if (total>100) {
    app.alert("The total of the beneficiary fields must equal 100%");
    event.rc = false;
if (total<100) {
this.getField("statement").display = display.visible;

Creating Back navigation in Adobe Acrobat 9 Standard

I have a huge pdf - actually an e-book - of more than 350 pages. Each page contains a health therapy with certain words hyperlinked which go to an explanation in the glossary, which is towards the end of the document. This means that the reader could click off page 9 to find themselves in page 320, and then after they've got their explanation, they will want to return to their original page (9).
So how do I get them back easily?
On Acrobat 7, there was a way of doing this. And it is explained here in this tutorial:
http://library.queensu.ca/webir/e-theses/word-to-pdf-etd_tutorial.pdf
The way to do it is found in Lesson 4, Section 3. It says:
* In the Actions pane select the "Execute a menu item" then click on the "Edit" button.
* The Menu Item dialog box presents itself. Select, from the menu, "View>Go To> Previous View.
My problem is that none of these navigation titles such as Actions, or Bookmarks Properties, or Execute a Menu Item appear in my Adobe Acrobat 9 Standard.
And I'm not even sure whether Adobe Acrobat 9 Standard can perform this navigation tool, or whether it is only available in Adobe Acrobat 9 Professional. I rang Technical Support, but they didn't know. So they referred me to Customer Services, but they didn't know. So Customer Services referred me to Sales, and they didn't know ...
So please can anyone here help? I would be very grateful.
Thanks for listening!

Thank you for your swift response,
The problem is that the form has to be filled out and then submitted via email, as you mentioned the email clients have trouble, I do not have a problem with the amount of submissions as I do not think I will ever hit the max on the form.
I have been doing some digging, can I use "Extend Forms Fill-In & Save In Adobe Reader" function on the form so the users can fill out the form and then save it? And if so are you also able to have the "submit Form" function with this or can it only be one or the other?
Thanks in Advance
Laig007

Flash Video Arrives in Adobe Acrobat 9

Adobe has released Acrobat 9. The newly released version now allows Flash Video contents, which makes it more powerful for business presentation.
Actually, the concept of using multimedia files in PDF documents is nothing new. In the previous versions of Acrobat, you are able to embed QuickTime video and other formats into a PDF file. But you need an external media player installed on your computer for playing the video. Now in Adobe Acrobat 9, video can be played within a PDF document with no need to have any media player installed. Thus makes it more convenience to share.
This is a challenging feature which will affect its surroundings. As we know, the similar program for business presentation, PowerPoint, now only supports video and SWF import. If you want to import an FLV file, you must convert the file to WMV, AVI, or MPEG, etc. which can be perfectly done with our product, Moyea FLV to Video Converter Pro 2.
The following passages are some notable features related to video import:
The powerful business version Adobe Acrobat Pro Extended provides more favorable features.
Deliver a compelling branded experience using PDF Portfolios
Create interactive, on-demand presentations with Adobe Presenter
Easily share video in PDF files
Share 3D designs and PDF maps
With Acrobat 9 Pro, you can insert FLV or H.264 video for direct playback in Adobe Acrobat® and Adobe Reader. New Adobe Acrobat 9 Pro even enhances Creative Suite 3.3 which is the indispensable toolkit for professional design and print production.
The Extended version provides even more powerful functions:
Easily adding audio, video, and quizzes to your PowerPoint slides and create rich, interactive presentations with Adobe Presenter (included)
Convert a variety of video formats to FLV for playback in PDF
Embed video in Microsoft Word or PowerPoint and convert to FLV in PDF
Convert 3D content to PDF for cross-platform sharing and collaboration
Combine multiple CAD formats in one assembly and save as PDF with Adobe 3D Reviewer (included)
Convert 2D and 3D designs from major CAD applications to PDF for use by extended teams without expensive CAD or viewer software
Create PDF maps by importing geospatial files that retain metadata and coordinates
In a word, Adobe 9 will totally change the communication and association of electronic files.
more information:
http://www.video-to-flash.com/
hope it can help u.

Clay Aiken announces he's gay.
(FILE UNDER: news that isn't news, even if it is news)
(REFERENCE: Adobe Clip Notes, Creative Suite CS2, 2005)

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

Update automatically under which circumstances, exactly?

Error 1500 in Adobe Acrobat 9 Pro Install

I have Windows 8.1, and I am attempting to download Adobe Acrobat 9 Pro from the content disc provided when I purchased Creative Suite 5 some time ago. During installation, I received the Error 1500 message. No existing forum is solving my problem. I have tried unregistering, then re-registering my Windows Installer. There are also no mid-installation processes in my registry. Also, the fact that I can only get customer support over a forum is unpleasant to me. That seems a little consumer elitist, don't you think? Anyway, I digress. If you can, please help.

Hi athoopes,
We apologize for the inconvenience, we would try to help you with this issue.
I would like to inform you that there could also be an issue with the compatibility between Acrobat 9 pro and windows 8.1 as it was not tested on win 8.1.
Check system requirements System requirements | Acrobat family of products
Kindly check if the log files(.GZ) for acrobat is getting created on the below mentioned location.
C:\Program Files\Common Files\Adobe\Installers
Thanks,
Atul Saini

Testing plugin in Adobe Acrobat 9.0 Pro

Hi,
I am trying to use Adobe Acrobat 9.0 Pro to test a plug-in I have created.
I have previous loaded and tested this plug-in in Adobe Acrobat 9.0 Pro Extended and it works.
Is there something I need to do to load this plug-in in Acrobat 9.0 Pro?
Thanks,
Jesse Perry

Bernd,
I have a test box with Adobe Acrobat 9.0 Pro Extended installed which I have used for testing with this plug-in for 3 months. I developed this code using Visual Studio 2005. The plug-in works on this system. I loaded Adobe Acrobat 9.0 Pro on another test machine and copied the same plugin to the plug_ins directory of this machine from the Pro Extended plug_ins directory on the previous machine. When I start Acrobat 9.0 Pro, I don't see the menu that I created for the plug-in as I do on the original test machine.
Is it wrong to test it on a different machine from where it was compiled?
Jesse Perry

Adobe Acrobat XI Miniaturseiten einbetten?

Similar Messages

Maybe you are looking for