Adobe Active X will not work with my Windows 7. Suggestions?

My Adobe Reader 9.xxx was replaced with Active X, which will not work for me. I keep getting a box message that says perhaps the Adobe.com site is too busy at the tine. I would rather have my Adobe reader 9.xxxxx back as it worked very well for me. I have it on my other computer and it work fine. I am using Windows 7. Any suggestions?

Mike Garin wrote:
After making changes to Internet Explorer, per Adobe's instructions, Adobe Reader is now working. Thank you for your patience and your help.
Regards,
Mike Garin
From what I understand from this message, it would seem that your Reader passed from "not working" to "now working", whatever you may mean by these two expressions. I am glad.
May I suggest that next time you have a question, please try to state it clearly and also give enough and accurate details about your problem?
It would also be useful if you coud mark this question as Answered.

Similar Messages

Adobe Flash Player Will Not Work with Safari Mac OS 10.9.2

I have tried numerous times to install Adobe Flash Player for Mac OS 10.9 and get Plug-in error when I try to run it. Before the suggested update, Flash Player ran fine. I would not have tried the update except the files on the web site that I am usinf had a symnbol statiing that the later version of Flash Player was required for it to run.
I did what Adobe suggested and removed the plug-in and then reinstalled it. Still does not work. When is Adobe going to fix it? I think it was not well researched before the release, and it definately has compatibility issues with Mac OS 10.9 Mavericks
Thanks,
Fred

Hi Mike M,
Thanks for the quick response. It worked OK after I did this, and I alerted other users in my MUG just in case they have a similar aged Macs. I hope that the fix for this will be automatic in the next update.
Fred Crowder

Why is it that Adobe CS2 software will not work with Mac OS Mountain Lion? What do I do?

Why is it that I must pay more money to upgrade my Adobe software so that it will work with Apple Mac OS Mountain Lion. Is it that Adobe wants to wring every cent out of me in order for me to use there products? Or should I just delete the Adobe software from my system and forget about Adobe and find something else?

Waynjer61 please see the system requirements for Creative Suite 2 listed at http://forums.adobe.com/thread/1195856.
The largest issue which is preventing you from utilizing Creative Suite 2 on your current computer is the switch which was made from PowerPC processors to Intel processors. This coupled with Apple dropping Rosetta support, http://en.wikipedia.org/wiki/Rosetta_(software), which previously allowed Intel processors to utilize applications coded for PowerPC processors is the main cause of Creative Suite 2 no longer functioning under newer operating systems.

Adobe ID login will not work with Mozilla SeaMonkey

Having not logged in for many years it came as no surprise to find I had forgotten my password. But it turned out more complicated, Using my favourite browser from Mozilla SeaMonkey I could not get past the "reset password".. or subsequently log in. I get a file sent to me called create_account.do or login.do and SeaMonkey does not know what to do with this..
I appreciate that this section of the forum does not deal with the workings of the Adobe forum web site, but perhaps.. as this forum is sort of related to browser compatibility.. this problem could be passed on to higher authorities by someone..

I use Mozilla Firefox as my default browser. But some parts of the Adobe site don't perform as well as they should with ad blocking and other add-ons enabled.
My first suggestion is to disable ad blocking and any other optional add-ons you may have working in Sea Monkey.
My second and only other suggestion is to switch to Google's Chrome browser. When the going gets tough, Chrome usually works when all the other browser don't.
Nancy O.

Home Sharing will not work with my Windows 8 64bit with new itunes. All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App. They all did before. Only thing that has changed is new PC/itunes. Any Ideas?

Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

The latest version of iTunes will not work with my windows platforms. It cannot access the windows runtime library.

The latest iTunes can't access my windows (including Vista 32 & 64bit, nor Windows 7 64 bit and 32 bit versions) "Runtime" library. I've tried reloading the windows suggested .dll as well as doing a system restore and also downloaded the iTunes update and load it manually, but nothing will work. Is Apple aware of the problem and planning to release a fix, or do I have to abandon iTunes and my iPod?

Hello there, Enantiomer.
The following Knowledge Base article provides some recommendations for troubleshooting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Adobe reader will not work with games

adobe reader will not work with games

That is correct. Adobe Reader is intended for viewing PDF files, not for playing games. Perhaps you are thinking of Adobe Flash Player?

TS1538 Ipod Classic will not work with Windows 8. Is there a fix?

Itunes will not work with Windows 8. I have the latest version of itunes!
When will the fix be available?
When I try to Sync my ipod, nothing happens.

Hi,
You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version.

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

PSE13 trial version and it will not work with Windows 7

I have downloaded PSE13 trial version and it will not work with Windows 7

I have been using PSE 13 for 3 months with no problems. When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

Adobe download assistant will not work on my machine?

Adobe download assistant will not work on my machine. When i try to start it i get a message saying "Sorry an error has occurred. This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance." Any ideas what to do

Are you using Mac OS? If so please try removing the Adobe Download Assistant from your Applications folder and try again. This issue is documented in the Known Issues section of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html.

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Adobe Active X will not work with my Windows 7. Suggestions?

Similar Messages

Maybe you are looking for