Adobe AIR dynamic sound and recording delay issue

I'm writing mobile application with Adobe AIR. The application use AIR Microphone API to record sound to file and later replay it.
The problem manifest only on mobile devices, not simulator. Specifically only on iOS devices, android devices seem to work OK.
Sometimes the recorded sound is missing samples. I know this because I use iFunBox to copy the recorded file to another application that replay it. The dropped frame manifest during playback as very fast audio because only part of the samples were recorded.
Sometime the playback is to slow which manifest as very slow audio. I know this because when the recording is fine and the other application play the sound right or when I take a file I recorded in the simulator (which run on my MacBook) and it only play slow on the mobile device.
How can I make sure the sound is good even when the application is a bit busy?

A little bump.
I still haven't found any solution to this.

Similar Messages

  • Adobe AIR Error - Uninstalling and Re-installing does not work?

    I keep getting this error everytime I turn n my laptop.  I have uninstalled and re-installed Adobe AIR several times and still keep getting this error after it tells me it has been installed successfully.  "This installation of this application is damage.  Try re-installing or contacting the publisher for assistance."  What is wrong with this program?  I cannot keep uninstalling and re-installing  this program and it is not installing properly.

    Pat has a great point and asks a good question.  In addition to identifying the AIR application that is causing you problems you may also want to review Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.html.

  • Include Adobe AIR in apk and app file.

    Is there any way to include a Adobe AIR in apk and app file (Android and iOS), that the user dont have to download it and install separtely?
    Is it possible to be  done in Flash Builder 4.5 (ActionScript Mobile Project)?

    See Captive Runtime
    http://tv.adobe.com/watch/adc-presents/adobe-air-with-captive-runtime-support-for-mobile/

  • Adobe AIR Runtime Redistribution and Native Installer

    Will there be new instructions for Adobe AIR 2.0 Runtime Redistribution? In particular, I'm looking for instructions on how to use the runtime redistribution installer to perform a "side-car installation" of AIR 2 alongside an application that uses the NativeProcess API (and so must be built into a native installer instead of a .air file).
    Thanks!

    Thirded!
    On a test deployment using SCCM and the supplied Adobe AIR Runtime Installer files, we have managed to install our application with the 1.5.3 Air Framework with no major issues other than having to disable the Auto Update feature that doesnt really work in a corporate environment.  Everything was absolutely fine until the release of AIR 2.  Now, the test machines are prompted to install the updated Adobe Air 2 framework once a week, see an excerpt from an Adobe blog post below:
    "In addition, once a week AIR apps check to see if an AIR update is available, and if so, users are presented with the option to update to the most up‐to‐date version, helping to ensure that end users get the benefits of improved security and performance."
    That sounds great right?  Except my users (like many other corporate users) don't have Admin permissions on their machines (hence the use of SCCM), with the result being resultant error messages when a user attemptes to install the AIR framework update without the necessary permissions.
    All of the above would be fine if the Adobe AIR Runtime Installer files were updated to include the latest version of the runtime.  This of course hasn't been done yet - does anyone know when this may happen?  Can anyone help me with this or offer any advice?
    I hope the above makes sense and I would really appreciate any help or advice!
    Thanks!

  • Problem with Adobe Audition 2.0 and recording from a 1212m.

    I bought a brand new machine and have be configuring it all week. Everything has been going well, except getting Adobe Audition 2.0 (the new version) to “hear” sound from the 1212m.
    The intel 975 motherboard has an integrated HD sound system already on board and I have been able to get adobe audition to recognize it and record from it. This is what I have Windows XP Pro set to as my default sound card.
    I installed the 1212m and I have gotten my monitors to work by using the XLR jacks on the monitors to the ¼ inch jacks on the 1212m using a VST (NI’s Kontakt 2) as the audio source. So it works.
    What I can’t seem to get to work is getting Adobe Audition to “hear” the sound coming from the 1212m.
    Patchmix seems to be working ok. The audio bars jump each time I hit a note on the keyboard.
    I have configured Audition by going to Audio Hardware Setup and setting it to EMU ASIO and tried every combination of INPUT and OUTPUT, but when I hit the Record button in Audition it just flat lines..
    I was hoping that once the audio made it from the VST though the 1212m and out to the speakers, that getting Audition to record it would be easy, but that hasn’t been the case.
    The Intel 955 Extreme Edition and the 975 motherboard are brand new and I’m worried that being on the bleeding edge of technology, that one of the drivers isn’t working correctly and causing me hours of debugging a problem that is unworkable from my end.
    Hopefully the problem is just some small stupid thing that I’m doing or failing to do (like normal).
    Any ideas would be helpful.
    thanks

    I'm just saving it into a file in "My documents" on the internal hard drive. It's a computer in the office which has been used my other people before me and I have my own file which I was always able to save Adobe sound files into before, so I don't think it's anything to do with me not being allowed or read-only.
    I've also been trying to save it onto USB hard drives. This works when I save it under a different name, but not when I'm just trying to update a file i've been working on. Basically I have to create a new file everytime I add something, so like "myaudit1", "myaudit2", "myaudit3" etc etc, even though it's the same piece of work just updated.
    Hope that makes sense!

  • Adobe Air 2.5 and AIR Debug Launcher (ADL) from AIR 1.5.3 SDK

    I am having some issues with the differences between running my Air Desktop application with the ADL from within my IDE and actually running it as an packaged air application that is installed. Everything functions as it should in the IDE when run with ADL, but once it is packaged the drag and drop functionality no longer works correctly.
    I was able to get this to work when Adobe Air 1.5 runtime was installed, instead of 2.5. I am aware that there were a lot of changes made with this last update, but I am unsure of how to proceed, as I am unable to debug the packaged air application to see what is actually happening.
    One solution that I could see would be to install the Adobe Air 2.5 SDK and use that to debug with.
    If anyone has any insight to why drag and drop works in the ADL and the runtime, your feedback would be much appreciated.
    Also, I am using Flash Builder 4, with the Flex 3.5 SDK

    Hi,
    We have same problem. On AIR 2.0.4 the drag&drop works correctly but with version 2.5.1 is problem. Do you found some solution for it?
    Thanx

  • Adobe Air stopped working and will not install on my macbook

    Hello, i have been having an issue with adobe Air for several hours where it will not launch any applications that use Adobe Air and then when i try and install a new version of Adobe air it will not lets me install the new version and gives me the error message
    "This application requires a version of Adobe AIR which cannot be found.
    Please download the latest version of the runtime from
    http://www.adobe.com/go/getair,
    or contact the application author for an updated version."
    Now i have been looking for an answer to my problem all night, i tried several solutions to no avail these solutions include turning off automatic graphics switching, uninstalling all my adobe softwares and trying to reinstall Air, Downloading the Adobe Air with Firefox, Safari, and Google Chrome. None of these solutions worked and this is very frustrating.
    Please can anyone give me a solution to my problem.

    JacobEPhillips please try the steps listed in Troubleshoot AIR installation | Mac OS - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-mac-os.html.

  • Adobe air sony vaio tablet pc delaying problem..

    hi,
    i am created an app for our agency with adobe air..
    app is working fine with pc, mac and etc. but, app isn't working with sony vaio i5 -win8 tablet pc.
    problem is , delaying. when use application with mouse , no problem. but, if you are using the app with finger, it's doing very delaying.. what can i do?
    error video :
    http://lp-digitalprojects.com/tabletpcSorun.mp4

    Hi
    Make sure we loged in as admin and then we need to first remove the temp files first then we need to unregister the installer and then we need to register the installer so the steps are....
    to delete the temp files we need to hold the windows key+R,
    We will get the run window then in the box we need to type the %temp% you will get the new window on that window we need to sellect all the files and then press delete
    after this we need to try to install the program.
    if this works good to go or we can try these steps
    Choose Start > All Programs > Accessories > Run.
    In the Open box, type "msiexec /unreg" and then press Enter. THAN
    Choose Start > All Programs > Accessories > Run.
    In the Open box, type "msiexec /regserver" and then press Enter.

  • Uninstall of Adobe Air leaves folders and files

    We have a server which had Adobe Air installed.  This was removed but there are still program file folders with files inside.  Why hasn't the uninstall removed these files ?
    Is there a tool or a way to do it properly or do we just have to delete the folder paths as I know Registry entries will also be existing.

    So, from my understanding of uninstallers, there is an install log which documents all the files that was installed.  When the uninstaller runs, it removes all of these files and then deletes the folder.  However, in this case, it does not remove the bin file and so does not remove it, and then when it checks the folder it sees there is a file still located in it so it does not remove the folder.
    I was unable to locate a way to change this in the LabWindows/CVI distribution.  An option might be to include the bin file in the installer.  However, I'm not sure exactly what this bin file does and if this would cause any future issues.  Another option would create a bat file that is distributed with the uninstaller that uninstalls the program and then deletes the folder.
    Jesse S.
    Applications Engineer
    National Instruments

  • Adobe AIR Installer.app and Comcast ID

    Has anyone had trouble with installing the Adobe AIR Installer.app in order to have a comcast ID on your computer and TV?

    If you need it for the usage meter, instructions here  > http://usagemeterapp.comcast.net/air.html
    Repair permissions prior to installing Adobe Air.
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click: Repair Disk Permissions
    This process can take a few minutes.
    Quit Disk Utility when it's finished then try installing Adobe Air.
    FAQ's for >  Xfinity Usage Meter Application

  • Adobe AIR on RedHat and SUSE Linux

    Hi,
    I am trying to install AIR 2.5 runtime on RedHat Linux and SUSE Linux . When I try to do it on RedHat, I get the following error:
    error while loading shared libraries: libpangocairo-1.0.so.0: cannot open shared object file: No such file or directory
    Can anyone help me fix it. I assume I will get something on the same lines on SUSE as well? Also, has anyone successfully done what I am trying to do? I can see that Adobe AIR page doesn't mention RHEL and SUSE (but openSUSE) supported, but still.
    Thank you!
    -Amit

    The only version that works on RHEL 5 is 2.0.4. Check this thread for more details:
    http://www.cherpec.com/2010/12/adobe-air-2-5-1-glibc_2-7-error/
    It works as I tested on RHEL 5. But to ship AIR heelp to customers, this is for sure not a solution.

  • Maximum file size for Adobe air for Androind and iOS compiled apps

    Hi All
    I am working on a project which has a few videos which I need to bundle into my mobile app for an Ipad app I am creating using Adobe Air for iOS. My question is simple is there a maximum file size limit on apps compiled using Adobe air for iOS? And if so what is it? Any help would be great.
    regards Mike

    Hi.  Im not a 100% sure this is correct.  I am able to make a large .IPA file (200+Mb) and it will go onto my iPad 1, but it does not work - Just quicts after a few secs.  If I run the same IPA on my iPad 2 it works.
    When I take out some of the assets so its a smalelr size then it does run on the iPad.

  • Adobe Air - HTML, Javascript and Threading

    Hello,
    I am developing an application using Adobe Air - HTML and
    Javascript. What I am trying to do is to implement threading in
    Javascript. I am using implementing threading in Javascript as per
    this Neil blog.
    Click
    Here. It clearly says that this threading works only in Firefox
    2.0 and I am trying to use this in with my Adobe Air, but when I
    try to refer a function , it gives me error saying "unable to find
    it".
    I was wondering if this is the best way to go for threading
    in Adobe Air HTML application or there is some other way also.
    Thanks,
    Jaikishan

    Hi jjalan,
    The yield and generator functionality is only available in
    Firefox's javascript execution engine. When you are executing
    javascript in AIR, it is done by the webkit and squirrelfish. Take
    a look at
    http://webkit.org/blog/189/announcing-squirrelfish/
    If you can find a javascript library that works on safari /
    webkit, chances are high that it may work in AIR.
    Also, you can always do pseudo-threading via the age old
    setTimeout()

  • Camera, sound, and general design issues

    I bought an iPod Touch 3G about a year ago. Recently, I sold my 3g and bought a 4g. I am a professional web and interface designer and have been in the industry about 5 years.
    With the iPod upgrade, I got camera functionality. Also, the recent iOS update added a new set of sound options. It appears that you can have the sound muted, but still get notification sounds from mail, facetime, and perhaps other applications as well; a good feature. The multitasking bar also now has a volume slider as well.
    My Proposal (see below for details)
    - Link the camera shutter sound to the regular iPod volume. Or have a setting to turn shutter on and off. Or add a “Ringer and Alert” option to disable shutter sound.
    - Add a “mute all sounds” button in the multitask bar.
    - Remove the sound slider in the multitask bar and replace it with a brightness bar.
    The Camera
    The camera seems to work great. Unfortunately, it isn’t the highest quality, which I heard was not due to cost, but because of size. Really Apple? Because 0.28 inches is just borderline “too thick?” But that is a whole other issue. The issue I am having is that the camera makes a really nasty (and often loud) shutter noise whenever I take photo, even when the sound is muted. Apple did add the “Ringer and Alerts” sound volume, which apparently also is linked to the camera shutter noise. So either I get audio mail alerts with shutter noise or I get no audio mail alerts with no shutter noise. The “Ringer and Alerts” section allows me to disable certain sounds (incoming mail, outgoing mail), but not the shutter sound. Shutter noises are annoying and there are plenty of circumstances where you do not want a shutter noise. And no, I am not talking about perverted circumstances. Say you are in a boring conference reading a magazine and want to send a photo of a page to a friend? Perhaps you are in a retail store doing some comparison-shopping online and are taking photos of bar codes? Maybe I have witnessed a crime and want to capture a photo of the fleeing perp. There is no reason that people within a 3-block radius need to know that you are taking a photo with my iPod Touch (…and yes, the last example was a bit over the top). Since mail alerts are very useful, I tend to leave them on even when the volume is muted. I typically leave my sound muted because often I may be using a sound application (games, youtube, etc) in a waiting room or other situation where there are people around. I like to be courteous to other people, so I leave my phone on vibrate and go to an unoccupied room (when possible) when receiving a phone call. So leaving my sound on is not a good option for me. However, in order to take a silent photo, I have to go into settings, go to sounds, and slide the “Change with Buttons” option to off. Then when I am done taking the photo, I have to slide it back. Very inconvenient and I have to remember to do it if I am taking a silent photo. Why not add a “Camera shutter” option to the list of sounds in the “Ringer and Alerts” section? Or maybe just bundle the camera shutter sound with the regular volume control of the iPod Touch. Or just add a setting to turn shutter sound on or off.
    The Sound
    Why is there no easy way to “mute all sounds,” especially with the new sound options of the iOS? This option should be added to the multitask bar. If you are going into a meeting and do not want audio alerts. When the meeting is over, simply go back to the multitask bar and unmute all sounds; simple to use, easy to add. Why did Apple add a volume control to the multitask bar? You can adjust the volume from any application by using the external buttons! Also, perhaps I just don’t understand the new functionality of the volume buttons, but how come you cannot adjust volume from within some applications (camera and others)? The buttons just don’t seem to do anything in those applications. Why in the world would you do that? Those sound buttons have a specific purpose that users are accustom to. No matter what application you are in, you can easily adjust the sound. If you have some feedback on the new functionality of the buttons, please let me know.
    The Brightness
    Sound and brightness are the two items I change the most. Sometimes I am using my iPod Touch in a dimly lit room, so I like to turn down the brightness. The auto brightness works, but not well in dimly lit rooms. Watching YouTube videos can sometimes be a bit cumbersome with the brightness. If the video is to bright or dark, you can to exit the YouTube app, go to settings, adjust the brightness, go back to YouTube and resume the video. The same goes for the Video application. Some games are brighter or darker than others, so adjusting the brightness after starting a game is a common circumstance. Why not replace the audio controls in the multitask bar with a brightness option. Audio is accessible (or at least should be) from any application thanks to the hardware buttons.

    Welcome to the discussions,
    this is a user to user forum, and Apple does not follow the discussions. But you can address Apple directly using this link: http://www.apple.com/feedback/ipodtouch.html

  • Buffer size and recording delay

    Hi
    I use a Focusrite Saffire LE audio interface, and in my core audio window the buffer size is currently set at 256 and there is a recording delay of 28ms. I don't think I've ever altered these settings since I started to use Logic. I don't know if this is related, but I do notice a slight delay when I monitor what I'm recording -- a slight delay, for example, between my voice (as I'm recording it) through the headphones and my "direct" voice.
    Anyway, are these settings OK, or should they be altered for optimum performance?

    256 samples Buffer size will always give you a noticable amount of latency. If you use Software Monitoring you should try setting your Buffer to 64 samples. With the recording delay slider in the preferences->Audio you can compensate for the latency (of course not in realtime) so that the Audio will be placed exactly there, where it should hae been recorded at. In your case set it to a -value. A loopback test (check the link below) will clarify the exact amount of Latency occuring on your system.
    http://discussions.apple.com/thread.jspa?threadID=1883662&tstart=0

Maybe you are looking for