Adobe and large 16 bit files scanned from 35mm

Just noticed that Adobe Photoshop does better Auto job of the above file type that Lightroom. Has anybody noticed this or does Lightroom not really support 16bit properly. PS it rejects files larger than 150mb by the way.
Thanks in advance

There is a limit of 10,000 pixels in each direction, regardless of the bit depth.

Similar Messages

  • LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

    LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

    Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

  • I have a new iMac and want to transfer files etc from my old iMac with an ethernet cable

    i have a new imac and want tot ransfer files etc from my old imac using an ethernet cable

    Connect them together with Ethernet cable and use Setup Assistant.

  • Newbie question: How to share large QT movie files exported from FCP X?

    Well, I've navigated through FCP X for the first time and I now have 16 QuickTime movie files I have exported from FCP X. Each file is a song from a live band performance. The files are:
    - Apple ProRes 422
    - 1920 x 1080
    - 24-bit
    - Frame rate 29.97 fps
    Now I need to share these files with the band members. They will use them for two purposes:
    - Watch, as feedback on their performance. In this case, I'd like to preserve the quality as much as possible
    - Put some of the movies on YouTube, where quality will be lost, of course. They may post only short clips from the songs.
    These 16 .mov files total 115GB. The smallest is 6.5GB, the largest is 13.9GB.
    The quality of the movies is fantastic, both video and audio. I cringe to think about degrading the quality............but I have the practical problem of how to get the files to five different band members.
    I normally distribute audio files I've mixed in Pro Tools via DVD-R discs, but the files are much smaller.
    What are my options for sharing the files?
    Do I need to use an application like Compressor to compress the files (ugh) to get them onto multiple DVD-R's?
    I would assume this is a common problem that all FCP X users deal with.

    I strongly recommend you to use Compressor. It is easy to use and there a lot  of presets.

  • Header and footer in PDF files generated from Business Publisher

    Hi All,
    Is there any out of box feature to include Header and Footer of our choice in the Pdf file of Process Model generated from Business Publisher (from Print function in the publisher explorer)
    Thank you all in advance.
    regards,

    Hi Raja,
    Does this mean that you have been sucessful in generating the PDF from the BPublisher?
    If yes, could you please share how you achived this. Platform .. version ect. you have.
    I am trying to create the PDF , but my IE popup just ... well ... just disappears..
    thanks
    regards
    Sanjiv

  • Updated adobe and can't open files - have a macbook pro lion- help?

    I saw something about plug ins - have no idea what that means - can someone give me specific steps - thanks

    can someone give me specific steps - thanks
    If we only knew what you want...

  • I just purchased a macbook air and want to transfer files from my macbook (5 years old!). Can I transfer any of my software from one to the other?

    Help!  Can I transfer my SPSS software to my new computer? How about End Note?
    I just purchased a macbook air and need to move files, etc., from my old MacBook. 

    Use Setup Assistant and a Time Machine backup of your old system. Details are described here.
    http://pondini.org/OSX/Setup.html

  • How to allow user to select pdf file on local machine and populate field with file name only

    Folks,
    I have a project requirement that I am stumped on.  I am admittedly a novice, so forgive questions that may seem obvious.
    My requirement is a form running on a client system where the user can click a button and select a PDF file name from a PDF on their local machine and then populate a form field with that file path & filename.  The file names vary between all machines, so there is no static list.  Note that the PDF is not embedded, nothing is executed, I simply need the file name.
    There are several of these on a form (20+), so manual name entry is too error prone.   I would like to use a 'browse' type dialog, but can not figure out how to implement it.
    I've looked at app.browseForFile, but the users can not install a javascript file in their adobe folder or any other files;  the functionality has to be integral with the original PDF. 
    Functionally, this is no different from the image object file browse, except that I need a PDF instead of an image file, so there doesn't seem like there should be a security issue that is any different from those surrounding the image object.
    I've been stumped on this for the entire week, and I have a deadline rapidly approaching, so any examples or suggestions (please remember I'm a novice) would be greatly appreciated! 

    Thanks for the reply Paul - do you have any sample code of how to attach the PDF?  Or how the user can select a PDF to open?  I might be able to attach it, retrieve the file name, and then un-attach it.
    Alternatively, do you know how to retrieve the file name from the imagePath object?  It will let you select PDF files, but I can't find info on how to retrieve the file name.   It should be the way you would retrieve the file name for an image.
    As a novice in this, thanks for your help and patience!

  • I was informed i need to purchase standard 11 or standard 12 (?) in order to make word files converted from pdf editable. how do i do this?

    i was informed i need to purchase standard 11 or standard 12 from adobe in order to make files converted from pdf to word using the recently bought and installed adobe pdf exporter file. how/where do i do this?

    Currently the Acrobat version is "XI" (no "12").
    With Acrobat XI installed:
    "File - Save As Other"  --- from here you pick the supported file format for the export.
    If a PDF has content that is the output of a scanner then that output (as is the case for All scanners' output) is a picture of text and not real text.
    During an export all that can be processed is the picture. As a picture of text is not text it is understandable why Word (or other word processors) cannot edit the content.
    So, for such, prior to export run Acrobat's OCR and save.
    The export will be of the OCR content.
    Do expect to do clean of the text, spelling, punctuation, layout etc.
    This may be minor. This may be major. But, there will be some.
    Adobe as some online subscription services that can take a "proper" PDF (NOT all are eh) and export to supported file formats.
    Two are "ExportPDF" and "PDF Pack".
    Be well...

  • Seperating file name from the path

    Hi,
    im trying to validate the file path and trying to seperate file name from the path.
    for eg.
    if the path is f:\sapfilepath\doc\ext.txt
    need to get f:\sapfilepath\doc  im looking for a dynamic way of doing this.
    your help will be appreciated.
    Regards,
    ravi.

    Hi,
    Use the function module
    SO_SPLIT_FILE_AND_PATH
    Thanks,
    Naren

  • Scan From String White Space

    i all,
    I'm trying to use Scan From String in order to parse some data coming in from UDP. 
    Input String: ASCII [00 01 02 03 ... FF]
    What I want: s[00 .. 30]  d[12], d[34], d[56] leftover s[37 38 39 ... FF]
    ATTEMPT1
    Format String: %49s%2d%2d%2d
    What I get: s[00-09] RUNTIME ERROR!
    ATTEMPT2
    Format String: %49[^]%2d%2d%2d
    What I get: Only allows first output. Will error out if I use any additional outputs from Scan From String
    ATTEMPT3
    Format String: %49[^(0xFF)]%2d%2d%2d Value in () is ASCII character FF.
    What I get: s[00 .. 30] d[12], d[34], d[56] leftover s[37 38 39 ... FF]
    It appears as though when I use %##[^] it thinks I'm looking for the ENTIRE string so it will not let me add any more Formatting.  If I add a delimiter other than ^ it will run, and it will work presuming that character isn't within the first 49 characters... and I can't guarentee that it won't.
    I'm aware I can parse my string using subsets and whatnot... but Scan From String is so elegant.  It would be great if %S allowed for white space... or if $##[^] would simply take the first ## characters and allow me to Format after that.
    Is there a simple, elegant way to do this?  I wish my dataset was only 3-4 outputs. It'd be ideal if I could.  Thanks.
    Edit:
    It might be more helpful if I provide a less abstract example:
    I have an ASCII Header (Finite Length String), a Sender IP (Finite Length String), a Timestamp, a Message ID (Finite Length Decimal), A Message in ASCII ( '1' actually means 0x31, not 0x01)  And for some ungodly reason... no delimiters.
    So I was HOPING %##s%##s%<%H:%M:%s>t%##d   (With leftover string to be my message)  would work, but if any white space is contained within there... it messes up. 

    I cannot provide exact strings because the string is actually ASCII characters, most of which aren't displayable. 
    I have a string where I have:
    24 ASCII Characters representing 6x U32 Header Data
    13 ASCII characters represening the sender IP (string)
    12 ASCII Characters representing the name of the message (String)
    12 ASCII Characters representing 3x U32 Data
    12 ASCII Characters represneting the name of packet (String)
    12 ASCII Characters representing 12x U8 Data
    256 ASCII Characters represening 256x U8 Data
    etc...
    It would be ideal to simply Scan from the string and output the data with the appropriate data types already assigned instead of splitting string and type casting each individualy.  But if, for example, my header starts with an ASCII representation of a U32 of 2560(decimal) it would look like this:  [00][00][0A][00].  ASCII 0A is considered white space.  So my header would only contain 2 ASCII characters instead of the desired 24.

  • Interesting scan from string error

    Got an interesting (and hopefully easy) issue with scan from string. VI and back panel image attached. Open it or make it and try to run it and let me know if you get an error too. Am I doing anything wrong?
    (BTW, ignore the %d in the scan from string. You can change those to %f or %g and it still burps)
    Message Edited by mlang on 07-21-2008 09:04 AM
    Attachments:
    ScanFromStringError.JPG ‏27 KB
    ScanFromStringError.vi ‏14 KB

    "JB" <[email protected]> wrote in message
    news:[email protected]..
    > Wiebe@CARYA a écrit:
    > Try "%[^,],%d,%d,%d". %[^,] scans all characters that are not ",".With
    this unique format specifier for Format Into String and Scan from String, an
    error will appear if the input string contains a comma or is empty (the last
    case is also true with the original code). Distinct specifiers may be needed
    to avoid this.
    Yes, comma's might not be the best seperator. It will also fail if the
    numbers use "," as seperators (as is often the case in Europe)...
    But the same can be said for any seprator... If you use tabs as seperator,
    the parsing will fail if the string contains tabs...
    Regards,
    Wiebe.

  • Canon d1320 I can't print or scan from my computer

    I have Canon D1320. the problem I can't print or scan from my computer until i choose the printer mode first. and then i print or scan from my computer

    Hi Ibrahim!
    So that the Community can help you better, we will need to know what Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x).
    Any other details you'd like to give will only help the Community better understand your issue!
    If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
    Thanks and have a great day!

  • Stopping anti-virus and anti-malware scans from scanning diasabled user files?

    Using Windows Server 2008
    If I only disable old user profiles, does anti-virus and anti-malware still scan their profiles and all files contained there within? Is this something that will happen regardless of the old users status and during a "whole computer" scan?
    And if so, are computer resources still being used for these old profiles?
    Thanks!

    Hi LaEmperor,
    From my experience with different AV softwares, I can say that they continue scanning them as part of the filesystem, despite of being disabled.
    I am not sure about your question for the resources, but I´ll give two shots:
    1. From the system perspective: basically affects the space that the files from that profile are using. The leave also some information on the Registry hive, on .USERS\ but unless it is a large numbre, I will not be concerned.
    2. From the Antivirus perpective: Well, as usual, Disk I/O, RAM, CPU, etc...; so as much as disabled profiles, as much they will add to the usual amount of resource comsumption.
    Hope you find this informative.

  • Good afternoon ladies and gentlemen!   My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

    Good afternoon ladies and gentlemen!
    My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
    Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
    The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

    <moved from Adobe Creative Cloud to Bridge General Discussion>

Maybe you are looking for