Adobe Application Manager terminates with Error Code A12E1

After downloading the new AAM from the Creative Cloud website and running it I get the following Error:
The last lines of the log file look like this:
Fri May 11 10:01:00 2012
[INFO] OPM - Build Version - 6.0.309.0
Fri May 11 10:01:00 2012
[INFO] OPM - Logging Level verbosity Set to 4
Fri May 11 10:01:00 2012
[INFO] OPM - Schema version and schema compatibility version are same or greater than current
Fri May 11 10:01:00 2012
[INFO] OPM - No Record found for the input fields
Fri May 11 10:01:00 2012
[INFO] OPM - Released OPM refrence successfully
Fri May 11 10:01:25 2012
[INFO] Setup - Build Version - 6.1.76.0
Fri May 11 10:01:25 2012
[INFO] Setup - Logging Level verbosity Set to 4
Fri May 11 10:01:25 2012
[INFO] Setup - TimeLog: Bootstrapper Start
Fri May 11 10:01:25 2012
[INFO] Setup - Launch Path set to /Volumes/ASU
Fri May 11 10:01:25 2012
[INFO] Setup - Found 7 packages in setup manifest
Fri May 11 10:01:55 2012
[FATAL] Native-Utils - Error Failed to close all Non Deployment Workflows ...
Fri May 11 10:01:55 2012
[FATAL] Setup - Error closing notification workflows. Cannot Install.
Fri May 11 10:01:55 2012
[INFO] Setup - ================= Exiting Installer with Code: -3 =================
I have killed all AAM* processes but always get the same error. Also downloaded multi times ... same effect.

"5.saurabhGupta1403,
May 11, 2012 9:32 PM in reply to Michael Carvin
Report
Try using the cleaner tool : http://www.adobe.com/support/contact/cscleanertool.html
Clean only AAM from the system. It should solve the problem."
This is what worked for me!

Similar Messages

When downloading Adobe Applicantion manager- I get Error Code: A12E1?

When downloading Adobe Application Manager (Error Code: A12El) appears?

Hi Chris,
Please try the suggestions mentioned under the below article and check if that helps.
http://helpx.adobe.com/creative-cloud/kb/download-error-403-launching-aam.html

Adobe Application Manager gives me Error Code A12E6. What does that mean? What do I do next? I am trying to Uninstall Photoshop CS5.

HELP!
After a disk crash, I need to uninstall Photoshop CS5 and then reinstall it. I don't know how to do that.
Thanks,
Doug Davis
[email protected]

Hi Uninstall Photoshop Error,
Please refer to the help documents below for the process for uninstallation and reinstallation of Adobe CS5 application:
UNINSTALL: Uninstall Creative Suite | CS5, CS5.5
INSTALL: Install Adobe Creative Suite 5
Hope this helps!
Regards,
Sheena

What do I do with error code: A12E1? I am trying to download CS6 CC.

What do I do with error code: A12E1? I am trying to download CS6 CC.

Hi BeckyTexas,
Please refer the steps mentioned thread: http://forums.adobe.com/thread/1272698 .
If still the isue persists then try downloading CC apps from the direct link: http://prodesigntools.com/adobe-cc-direct-download-links.html .
Kindly follow the very important instruction before download.
Regards,
Romit Sinha

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How do I open photoshop? I have it downloaded and only the Adobe Application manager shows with the

How do I open photoshop? I have it downloaded and only the Adobe Application manager shows with the list of other software. I clicked on photoshop, but not responding.

Nobody can know. Your information is far too vague - no system info, no other details. Just saying that it doesn't work is not conducive to providing assistance...
Mylenium

Adobe Application Manager install gives error message

I tried to install Application Manager and an error message came up telling me that it was a counterfiet. Not a genuine Adobe product. I've downloaded 3 programs before with no problems. Has something changed that I missed. Any help would be appreciated.
Carlton

The steps outlined at this link will resolve the issue http://helpx.adobe.com/creative-suite/kb/genuine-verification-failure.html

Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continues

Yes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Adobe Application Manager issues

Having an issue installing the Adobe Application Manager updates. Error code: A12E1.

There are multiple threads on this issue on Adobe forums. Refer to them. A few examples:
http://forums.adobe.com/message/4602195
http://forums.adobe.com/message/4724836
http://forums.adobe.com/message/4402616
http://forums.adobe.com/message/4396330
Let us know if you need more help on any specific issue.
Thanks
Nikhil

Error at update of Adobe Application Manager

During the installation of an update for Adobe Application manager appears the error message: U49M1P1
What is todo for resolution of this problem?

Did you EVER find out the solution to get this working?

Updating CC Desktop app always gives Error code: A12E1

Ok, this is getting really old. The fifth release of Adobe Cloud desktop app has come out since I purchased CC last December. Every time, the installer fails with error code: A12E1 (see attached). Again, I followed all the instruction regarding renaming the OOBE folder, first as admin user—then as root. The installer always shuts down and crashes the desktop application. I have a MacBook, Intel OS Lion 10.7.5.
Is Adobe ever going to fix this issue? I am tired of re-installing my Adobe Apps and presets every time the desktop app updates.

Hi
Try the steps mentioned in given document :- http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
Also, share the update on the resolution.
Sarika

Cannot install Adobe Application Manager

When I install this, I first get an error saying another instance is already running. The installation then proceeds and goes through the motions installation but at the then, I get an error saying "Adobe Application Manager failed to install". I've combed through my Windows Task Manager for things like "PDApp.exe" and "setup.exe" but I couldn't find any. I have a bazillion processes running and I don't have time to go through each one trying to figure out which is the right one. How do I install the Application Manager? It seems like all the CC apps needs the updated version of Adobe Application Manager in order to install.

Problem resolved. I called the 800 # and spoke with a technical support person in India. The steps to resolve were to rename the directory paths (2 of them) that pointed to the old Adobe Application Manager, then download the Adobe Cleaner Tool and use it to remove the Adobe Creative Cloud Desktop App. I logged off and then logged back in and re-downloaded the Creative Cloud Application manager and I was able to download (finally) Photoshop CC.
The old Adobe Application Manager came with my CS6 installation. It was probably running but it did not show up in the Windows Task Manager as either an application, process, or service. It also could be be uninstalled through Control Panels without having to remove CS6 altogether.

When downloading adobe muse trial from adobe application manager

adobe muse trial from adobe application manager im getiting error, 12152

Some users have reported issues with Internet Explorer 9 although it does not appear to be consistent. It is likely due to the security settings, install add-ons, or plug-ins which are causing the download button to not be available.

Hi, my "adobe application manager" files are damaged, can't download

Hi, my "adobe application manager" files are damaged, when I try to download an adobe application it just won't start because of that damaged "adobe application manager", I tried to find how to (re-)download/install "adobe application manager" but with out success and I realy need to download it tonight

uninstall whatever cs version you need to replace, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe Application Manager terminates with Error Code A12E1

Similar Messages

Maybe you are looking for