Adobe as a print option,any one help?

having trouble using adobe as a print option can any one help?

Hi jencsm52,
I would be happy to help. Are you trying to use the Adobe CreatePDF Desktop printer to print to PDF? If so, have you installed and configured this printer yet? (If not, it's available only on Windows, so please let me know what OS you're using.)
I look forward to hearing back from you.
Best,
Sara

Similar Messages

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6.

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

When i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?

when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?

I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback.

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

PATIENTNLIST CAN ANY ONE HELP

Can any one help to correct my errors.I tried to run this program but I coudn"t.
Thanks in advance.
import javagently.*;
import java.io.*;
import java.util.*;
class PatientMenu {
/* Example that uses the JG3 Display class to set up
a simple menu driven program.
Caution pressing close on ANY display ends the program!!!
public static void main(String[] args) {
Display menu=new Display("Main menu");
boolean running=true;
menu.prompt("option",0);
do {
menu.ready("select option, then press ready bar");
int sel=menu.getInt("option");
menu.hide(); // this removes the main menu from the screen
switch(sel) {
case 1: option1(); break;
default: running=false; // any entry other than 1 or 2 will end program
} // of switch
menu.show(); // get main menu window back
} while(running);
menu.println("End of program, please finish by pressing close");
void displayMenu(){
System.out.println("Patient List Menu");
Sustem.out.print();
Sustem.out.print("1) Add a patient to the list");
Sustem.out.print("2) Treat patient from the list);
Sustem.out.print("3) Show all patients in the list(in order of priority)")
Sustem.out.print("4) Update truma level);
Sustem.out.print("5) Show incremental time);
} // of main

THANK YOU FOR YOUR REPLY. BELOW IS YOUR MY REPLY.

HI, I downloaded and used illustrator last night, but today it crashes on opening? can any one help?

I downloaded and used illustrator last night, but today it crashes on opening? can any one help?
The only reason I download from Creative Cloudd is because my previous software copy is no longer supported, feeling very frustrated!

Tabitha,
Many still use unsupported ealier versions, and there is no real need to upgrade unless there is a real need.
Unless you have done something like installing new fonts or made other changes, it may be releavnt to look at the following list.
Or you can try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Can any one help me in this code

Hi all,
I have created a selection screen and my aim is to display some fields or some block dynamically by choosing some radio button is it possible.
can any one help me in this.
REPORT z_g_test.
TABLES: spfli,sbook,sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF BLOCK 1.
PARAMETERS:rad1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
           rad2 RADIOBUTTON GROUP g1 DEFAULT 'X' .
SELECTION-SCREEN BEGIN OF SCREEN 001 as subscreen ."WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
DATA ok_code LIKE sy-ucomm.
INITIALIZATION.
START-OF-SELECTION.
SELECT * FROM spfli WHERE carrid IN s_carrid.
ENDSELECT.
END-OF-SELECTION.
WRITE:spfli-carrid.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'US1'.
*      call screen 001 starting at 55 40.
ENDCASE.
Is i am going on the right way
Regards,
Lisa.
Message was edited by: Lisa Roy
Message was edited by: Lisa Roy
Message was edited by: Lisa Roy

This is what I meant. Copy this and try as it is and see if it serves your purpose.
REPORT ztest1 .
TABLES: spfli, sscrfields, sbook.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 4 LINES.
SELECTION-SCREEN TAB (25) tabs1 USER-COMMAND ucomm1
                     DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (25) tabs2 USER-COMMAND ucomm2
                     DEFAULT SCREEN 002.
SELECTION-SCREEN END OF BLOCK tabb1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE abc.
PARAMETERS: p_date LIKE sy-datum.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN .
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN .
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF SCREEN 002.
INITIALIZATION.
tabs1 = 'Search by flight date'.
tabs2 = 'Search by flight number'.
abc   = 'Some other parameters'.
AT SELECTION-SCREEN OUTPUT.
CASE sscrfields-ucomm.
    WHEN 'UCOMM1'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 001.
      tabb1-activetab = 'TABS1'.
    WHEN 'UCOMM2'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 002.
      tabb1-activetab = 'TABS2'.
ENDCASE.

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

Please help i started my project video format 720HD resolution 12x720 rate 25p at last when i finish and burn to dvd the edges are cut off any one help please i am really in trouble

please help i started my project with video format 720HD, resolution 12x720, rate 25p. at last when i finish and burn to dvd the edges are cut off and my logo cut off the screeen aswell any one help please i am really in trouble. thanks

Sorry, but I don't know anything about that app.
I did go to their Web site and I see they have a support link. Perhaps you can get help there or in their forum.
If you are OK with a DVD with a basic menu, you could try the Share>DVD option in FCP.
Good luck.
Russ

Hey, I had met a problem with installation. Can any one help me?

Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Thanks

Re: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

Please any one Help me

Hi,
I am prasanna.Please any one help me how to write case statement in dashboard prompt sql results.
Thanks inadvance
prasanna Undapalli

Hi,
While creating the dashboard prompts, you should be able to see 'Show' option which would have 'All Values' as Default. Change to SQL Results-
For example- I have taken Customer Status from the samplesales RPD . So the result would come as -SELECT "D1 Customer"."C2 Cust Status" FROM "Sample Sales"
Now modify the SQL as per requirement.
For Example- SELECT case when 1=1 then 'YTD' else "D1 Customer"."C2 Cust Status" end FROM "Sample Sales"
union SELECT case when 1=1 then 'QTD' else "D1 Customer"."C2 Cust Status" end FROM "Sample Sales"
union SELECT case when 1=1 then 'MTD' else "D1 Customer"."C2 Cust Status" end FROM "Sample Sales"
This is the syntax and in the 'Default to' put the 'YTD' as specific value so that the report shows the report for the 'YTD'.
And dont forget to add presentation variable and refer them in the intermediate reports.
Hope this should solve your problem.
Regards
MuRam

I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me

I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me and i am new to I pad

If it's not showing on the left-hand sidebar of your Mac's iTunes (if you are on iTunes 11 then you can enable the sidebar via option-command-S) under Devices then see if this troubleshooting article helps : http://support.apple.com/kb/TS1591

Can any one help? "Windows cannot repair this computer automatically."

I have a laptop satellite L455-S5000.
And when I try and trun on my computer a black screen comes on that says "windows is loading files..."
and after it loads a window pops up saying "startup repair is checking your computer for problems..."
and after that gets done it says "Windows cannot repair this computer automatically" so I click "Send information about this problem (recommended)" and then I click "finish" then it shuts down. when I try turning it back on it does the same thing over. Please can any one help me fix it? Im really clueless about computers and I have know Idea what is wrong with it, or how to even go about fixing it. thanks.

_Ashley_
Turn the laptop off, hold down F8, turn the laptop on and let go of F8 when you see the Advanced Boot Options.
In here, choose Repair Your Computer then press enter, follow the prompts, choose System Restore and restore your laptop to a point before the problems started.
If the laptop cant get you there, a system recovery starts the laptop from it's factory state but you loose your programs and files doing that. Holding the "0" beside "9" while you turn the laptop on boots the laptop from its recovery partition if you accept data loss.

I AM NOT GETTING THE TAX TAB CAN ANY ONE HELP ME

HELLO      I AM NEW TO SAP SD WHILE CREATING THE CUSTOMER I HAVE NOT GOT THE TAX OPTION CAN ANY ONE HELP ME

Hi
1.Go to OVK4(check tax relevancy data for customer master) and put your tax calculation type eg. MWST-0(tax exempted)
                                                      MWST-1( full tax)
2.Go to OVK3(check tax relevancy data for material master)
and put your tax calculation type eg. MWST-0(tax exempted)
                                                      MWST-1( full tax)
3.Now goto OVK1 and assign country IN to this condition type.
4.Goto OX10 and assign your plant for tax determinaton.
hope it helps out
plz. drop poins in success.
krishan kumar rai

Adobe as a print option,any one help?

Similar Messages

Maybe you are looking for