Adobe Audition 3.0 and Pinnacle 700 USB - How to record audio from VHS tapes???

Hi Friends,
I am new to Adobe Audition 3.0. I need your help.
Actually I am having a old Pinnacle 700 USB capture card. I want to record some audio in my computer by Adobe Audition.
I downloaded and installed required driver for Pinnacle 700 USB (for Vista).
But when I tried to capture audio from my VHS tapes, It not showing proper options. I don't know how to proceed further.
Could any one please help me... Please let me know what all I need to do.
Waiting for your helpful suggestions.
Thanks,
Yash

The Pinnacle is a video capture device and as such captures the video and audio into one MPEG or DV stream. Audition can't see it as an audio card and therefore can't capture audio directly from your video source. However once you have captured a video file using the Pinnacle you can probably get to the audio by using the Open Audio from Video command in the File menu in Audition.

Similar Messages

  • I am using logic to record a podcast and using soundboard to use as a playback for music and sound effects.  I'd like to soft patch sound board into logic, and still use my interface for recording audio from the other members of the podcast.

    I am using logic to record a podcast.  I have a presonus firestudio mobile for my interface so I can record several people at the same time.  I'm also using Soundboard for a playback system for music and sound effects.  I'd like to know how to soft patch Soundboard into Logic while still using the Firestudio interface to record the other members of the podcast.  Does anyone know how to do this? and if so can you tell me how to do it?  Thanks.

    Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

  • How to capture using Pinnacle 700-USB Analog to Digital (USB)?

    I have a Pinnacle 700-USB Analog to Digital converter which inputs Composite and L+R Audio and outputs a Digital signal through USB.
    I'm using this to digitize VHS tapes.
    I am trying out different Video Editing sw including Adobe Elements 7. Others like Pinnacle Studio 12 and Corel Video Studio 12 can import from this USB-device. It doesn't seem to be possible using Adobe Elements 7.
    I've looked at the page http://help.adobe.com/en_US/PremiereElements/7.0/WS51F6C811-8B79-4c26-B4B9-24C0919182B6.ht ml
    It mentions at the end "Note: If you capture using an AV DV converter, you might need to capture without using device control."
    1) What does the last Note mean? Which device control?
    2) Are there any possibility of this working? What should I try to play with?

    My Pinnacle Dv500 came bundled with Premiere 6.0 which I updated to 6.02... and I also updated the Dv500 driver software from the V3 to V4.5a so it would save in "standard" DV AVI Type 2 48khz files, instead of the ones that required the Dv500 codec to edit
    When I bought a new computer and started using WinXp instead of the Win2000 that came with my Alienware Pentium3, I could never get Premiere 6 to work... would start, flash a screen or two, and then just go away
    I then bought Scenalyzer, since it was compatible with the Dv500 (still had to have P6 and Dv500 drivers installed) but it turned out to be very FRAGILE as any slightest glitch on the tape would stop the program... and since some of what I'm doing is capturing my OLD library of VHS tapes, that simply wouldn't do
    My current solution is a dual boot drive with Win2k/WinXp
    Premiere 6 captures EVERYTHING in the Win2k partition... files saved to 2nd drive... and then I use PProCS3/Encore3 for editing and DVD creation
    Just a "bit" of a hassle to have to restart between capture & edit/dvd... but much better than Scenalyzer stopping every time an old movie hit a rough spot in the tape... rough spots that capture just fine with P6

  • Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

    Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

    All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

  • I have a new MacAir and don't know how to get info from my USB stick and my SD photo card.  Can anyone help me please?

    I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card.  Can anyone help, please?

    Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
    Matt

  • With one package of Adobe Creative Suite 2 and the upgrade CS5 how many computers can use it?

    With one package of Adobe Creative Suite 2 and the upgrade CS5 how many computers can use it?

    You have 2 activations and no more.
    Mylenium

  • Recording audio from USB

    Hi guys, I am writing an application (and an applet version) which will stream audio from a device and write it out to a file. I have tested it with multiple microphone configurations and have not been successful in capturing audio from a USB headset. I know that Java does not currently support USB unless by using a 3rd party library, but I wondered how java handles streaming from data lines. I am currently using javax.sounds.sampled library to achieve this and have been unsuccessful. Does using JMF change anything?
    Platform: Windows XP (have not tested it on linux / OSX yet).
    I was under the impression that if you plug in a USB headset, under Windows, it registers it as a sound device and java will ask the underlying system for a stream to that device, but still cannot communicate to a USB headset. Can anyone point me in the right direction as to whether or not this is possible?
    I apologize if this is in the wrong section, but I am wondering if by using JMF I will be able to achieve this recording.

    I found the solution ...
    To enable my USB headset, I had to disable my motherboard
    built-in sound card in my PC BIOS.
    When I did so, PRESENTER 6.1 is using the only microphone
    avalaible : the USB one ...
    But it is strange that PRESENTER 6.1 does not provide the
    input card choice ...
    Every other sound software I know does (like audacity and
    so...)
    See you

  • Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Please repost on the CS6 part of the Audition Forums.

  • I got a new computer and don't know how to get music from ipod touch to itunes library

    I recently got a new computer and don't know how to get music from my ipod touch to show on my itunes library. 

    You need to transfer the iTunes folder from the old computer to the new one.
    iTunes: How to move your music to a new computer (Mac or Windows):
      http://support.apple.com/kb/HT4527

  • Lenovo IdeaCentre B520 - Plug in a Vhs and record my old vhs tapes!

    Hi!
    Besides of all i want to thank you for the time you gonna lose to read this post.
    I bought a lenovo ideacentre B520 and i want to record my old vhs tapes.
    I plug in the VHS into the AV in ports (yellow, red and white) and then i switch in the monitor to the av mode.
    I can see the vhs tape in my computer but the problem is that i cant control the pc mode. I'd like to know how can i record the vhs tape in Av mode.
    Thanks for the help, and sorry my english writing...
    Cesar

    You'd need to tell us what kind of film and cameras you have. I think you'll need to buy some equipment to do that.
    An alternative is to send your film to a place like Integrated Imaging and they could transfer it to DVD or another suitable format for iMovie.

  • HT4016 How to extract audio from a movie that is already in my project without having to delete and re-import the movie?

    The article is
    "How to extract audio from a movie file"
    But it only tells you how to extract when you first drag the movie file into the project.  This much is obvious when a dialog presents you with a checkbox asking if you want to "Extract the audio track" ... Duh
    Here was my workflow:
    Dragged the movie file into my project
    I checked "Extract the audio track"
    I shifted the "Movie Start Time"
    Extracted audio track did not shift with the movie
    I deleted the extracted audio and played the audio directly from the movie
    Now, I need the audio extracted again at the current movie position
    I knew where this option was in the Logic 9 menus, but I'm having trouble finding it in Logic X
    Is this option still available, or has it been removed?

    Solved:
    I found the menu option for extracting or re-extracting the movie audio.  BTW, the original article:
    Logic Pro 9.1: How to extract audio from a movie file in 64-bit mode
    should really also state the menu command for extracting the audio, not just the procedure when first adding the movie to the project.
    Here's the menu command:
    File>Movie>Import Audio from Movie
    Cheers

  • The float in windows option is grey and not accessable ? How can I copy from one image to another ? Elements 11

    The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11

    You really are not getting this.
    "I guess I am still completely shocked that as a parent we can't download something for everyone to use."
    Why do you continue to think this although we keep telling you that this is not the case.
    You do NOT have to purchase anything twice.  You can share the music with as many ipods as you like in your household.
    The ipods are designed to sync with your computer regularly.  You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
    Take on of the ipods with the music in it.  Open itunes on your computer.  Plug in the ipod.  Do not sync.  Click File>Transfer Purchases  This will transfer the purchases from the ipod to the computer.  Make sure that you have authorized your account on the computer:  here are directions for that. http://support.apple.com/kb/HT1420
    Unplug the ipod.
    Plug in the other ipod with purchased music.  Do not sync.  Click File>Transfer Purchases  This will transfer purchases from the ipod to the computer.
    You can now plug in any of the ipods, select what you want to sync and sync.
    Have a look at the manual for the ipod.  http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • I joined this community in error and don't know how to delete myself from the group. Can someone please advise me on this ?

    I joined this community in error and don't know how to delete myself from the group. Can someone please tell me how to do that ?
    Thanks,
    Skeebo

  • HT1014 I'm working with imovie 08 and converted movie originally from VHS tape to .m4v files imovie wouldn't recognize it.  I converted to .mov files and imovie generated thumbnails (for hours) and shows a New Event but there is nothing there. Any help?

    I'm working with imovie 08 on Macbook pro OS X and converted movie originally from VHS tape to .m4v files imovie wouldn't recognize it.  I converted to .mov files and imovie generated thumbnails (for hours) and shows a New Event but there is nothing there. Any help?

    markmc78 wrote:
    .. I'm really struggling with the concept of events/clips/projects.
    consider usage of a diff. editor.. iMovieHD6, you're entitled for a free downlaod at apple.com:
    http://www.apple.com/support/downloads/imovieHD6.html
    but IF you're relaxed, opened your mind, follow the bright light, ommmm.. for Events & Stuff:
    your intended workflow will add another step of quality-degradition (8mm>>avi>>mp4>>iM08) ..
    consider the free tool Mpeg Streamclip www.squared5.com for 'chopping' that 90min beast into pieces..
    rename these new chunks, follow advice given on my site:
    http://karsten.schluter.googlepages.com/im08changeeventdate
    there's the manual..
    http://manuals.info.apple.com/en/iMovie08_GettingStarted.pdf
    and the most recommended books from Mr Pogue's Missing Manual series..

  • Problem with Adobe Audition 2.0 and recording from a 1212m.

    I bought a brand new machine and have be configuring it all week. Everything has been going well, except getting Adobe Audition 2.0 (the new version) to “hear” sound from the 1212m.
    The intel 975 motherboard has an integrated HD sound system already on board and I have been able to get adobe audition to recognize it and record from it. This is what I have Windows XP Pro set to as my default sound card.
    I installed the 1212m and I have gotten my monitors to work by using the XLR jacks on the monitors to the ¼ inch jacks on the 1212m using a VST (NI’s Kontakt 2) as the audio source. So it works.
    What I can’t seem to get to work is getting Adobe Audition to “hear” the sound coming from the 1212m.
    Patchmix seems to be working ok. The audio bars jump each time I hit a note on the keyboard.
    I have configured Audition by going to Audio Hardware Setup and setting it to EMU ASIO and tried every combination of INPUT and OUTPUT, but when I hit the Record button in Audition it just flat lines..
    I was hoping that once the audio made it from the VST though the 1212m and out to the speakers, that getting Audition to record it would be easy, but that hasn’t been the case.
    The Intel 955 Extreme Edition and the 975 motherboard are brand new and I’m worried that being on the bleeding edge of technology, that one of the drivers isn’t working correctly and causing me hours of debugging a problem that is unworkable from my end.
    Hopefully the problem is just some small stupid thing that I’m doing or failing to do (like normal).
    Any ideas would be helpful.
    thanks

    I'm just saving it into a file in "My documents" on the internal hard drive. It's a computer in the office which has been used my other people before me and I have my own file which I was always able to save Adobe sound files into before, so I don't think it's anything to do with me not being allowed or read-only.
    I've also been trying to save it onto USB hard drives. This works when I save it under a different name, but not when I'm just trying to update a file i've been working on. Basically I have to create a new file everytime I add something, so like "myaudit1", "myaudit2", "myaudit3" etc etc, even though it's the same piece of work just updated.
    Hope that makes sense!

Maybe you are looking for