Adobe Audition 3.0 change female voice to man voice?

its my first time using adobe audition ps help me...im just using this for our project in english
we recoreded a video and there are some videos that didnt have clear voices...i hope i can edit it ....to change it...like to cut all the voice in the video then replace it with the voice which im trying to create....
is it possible to change a female voice to a man voice? or somehow similar ... or just like deepens the voice? if yes...how?
pls help me...i really have to do this....thank you to those who would reply...

Well, it's possible and easy to lower the pitch of a voice. Use Effects/Time and Pitch then select the "Stretch" option. Select the "Pitch Shift--Preserves Tempo" box and drag the control until you get the pitch you want.
The bad news, though, is that the degree of shift you want is going to sound very artificial and "science fictiony" rather than a real voice. If you want the reasons behind this, do some Googling on the word "formants". The human voice is very complex in how it produces sounds and simply playing with pitch makes the relationship between these sounds incorrect and artificial. I believe there are very expensive bits of software that can do this but I've never played with them.
The other parts of you question suggest to me that you may wish to attempt what is known as "looping" or "ADR" in the professional film industry. This is getting an actor to re-voice the dialogue that was recorded on location. In a big budget film, it's not uncommon for 80 or 90% of dialogue to be replaced this way. Basically, you need to break your dialogue into short (one line) segments and arrange your monitoring so the actor can hear it over and over (usually with two or three timed "beeps" counting down to the line) so the actor can get the timing and speak in unison with the pre-recorded audio. It's time consuming but not TOO difficult. However, be careful with the acoustic of where you're recording. An echoey room will sound wrong if your scene is shot outdoors for example.
Bob

Similar Messages

Is there a way to view frequency levels in Hz on Adobe Audition 3.0 during voice recordings?

Is there a way to view frequency levels in Hz on Adobe Audition 3.0 during voice recordings so I can ensure the recordings are hitting the specific frequency range I desire?

The frequency analyser pane can run in real time and show you this, but with a voice, there's no way you can alter the effective range anyway - it's almost entirely dependent on the voice you are recording, and they all fall pretty much into the same bands - depending on whether you're male or female.

Adobe Audition CS6 Record Voice Problem

Hello Friends..! I've a problem :S My problem is record voice..! I don't save my voice on Adobe Audition CS6..! And There is an error..! Error İs " The sample rates of the audio input and output devices do not match. Audio cannot be recorded until this is corrected.
Use the appropiate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settings." that! Please Help Me..! I edited Edit>Preferences>Audio Hardware...! but it's not been..!

If you are using an onboard soundcard such as a Realtek then you have to make sure that Windows has it set correctly before Audition can see it correctly.
See this FAQ http://forums.adobe.com/thread/973133?tstart=0

How to change the language of the Adobe Audition CC 2014?

How to change the language of the Adobe Audition CC 2014?

Hello Israel Costa,
it's laid down there: Adjust the install language | CCM
Good luck!
Hans-Günter

PLEASE !!! how i can change language in the Adobe audition 6 pls help me !!!

I try all function. And I don know, how I can Change language please for information where ist this setting. Thanks so much

May be similar to this thread:
How to change the language of the Adobe Audition CC 2014?

Adobe Audition is cracking while recording voice.

I am running a few different computers with Adobe Audition for my radio station, we just transitioned over from Cool Edit Pro 2.0 and one computer is giving me an issue with crackling when recording. The thing is I am running Cool Edit Pro on the same computer and the cracking does not happen when recording to that program. I've been running through many different settings within Audition, and I don't really see any difference in the way the programs hardware are mapped. Any ideas?

Increase the buffer size in Preferences > Audio Hardware

Adobe audition changement de langue

bonjour,
j'aimerais réinstaller adobe audition 3 en anglais, comment faire ? Actuellement il est installé en francais
merci

Albertgeorges there are no option to transfer your English license for Audition 3 to a French license. This option is only available for current software versions available from Adobe. You can find more details at Order product | Platform, language swap - http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l.

Adobe Audition has encountered a problem and needs to close.

I have been using Audition 2.0 on this computer for quite some time and suddenly now when I open it, I get the cryptic error dialogue:
"Adobe Audition has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error, click here."
When I click for more information, it's something useless like:
AppName: audition.exe AppVer: 2.0.5306.2 ModName: unknown
ModVer: 0.0.0.0 Offset: 65726168
Nothing on my computer has changed. There are no viruses. I have not added any new audio plug-ins. I am completely up to date with all critical Windows XP SP3 updates and none have been downloaded and installed recently anyway.
I searched the knowledgebase and found a document that suggesting many things to try. I tried them all, including running the Windows hard disk "check disk" tool with options to fix file system errors and recover bad sectors. I also defragmented the hard drive. Lastly, I completely uninstalled Audition, then manually deleted any remaining files, including registry entries as suggested in another knowledgebase article.
I then re-installed Audition 2.0 and it did exactly the same thing! This it maddening. Now it gets even more interesting. I discovered that if I start up the
Adobe ExtendScript Toolkit that Adobe Audition installed also, then try to launch Audition from the toolkit, IT STARTS CORRECTLY! I can then close the toolkit and use it like normal. Weird work-around.
What the heck could possibly be going on? Anyone have any ideas? I've attached the error log file that is generated by the error but I doubt it will be of much help.
Thanks!
Steve in Chicago

stevefoobar2: I may have found a solution for you.
I had the same thing happen to me today. I was using Audition 2 this morning without any problems. But this afternoon, it started giving me the exact same error with no apparent reason. Nothing on my system had changed.
So I uninstalled it and installed Audition 3 in its place. Audition 3 continued to have the same problem that Audition 2 had, so we can assume that this is not something that was changed between versions.
But my attention was brought to the fact that you and I are both running Windows XP SP3 fully up-to-date. So I thought I'd try seeing it from the angle of a problem with Windows instead of Audition, and see if I didn't get a better result -
First, I logged on to Windows as Administrator. This may or may not be required, but you'll probably want to do it just in case (you'll see what I mean later). At this point, Audition still crashed the same way when I opened it, so I moved on to my next troubleshooting strategy -
Instead of opening Audition directly, I right-clicked the Audition icon and selected "Run as..." This may seem odd since I was already logged in as Administrator, but it proved to be the solution in my case.
In the "Run As" diolog, there are two main options: run as current user, or run as another user.
Since I was already logged in as Administrator, I could safely select the first option (run as current user). But here's the catch: selecting the first option allowed me to UNcheck the box underneath that says "Protect my computer and data from unauthorized program activity" (see the attached picture)
Audition opened without any problems when I did this.
This makes me think that one of the Windows security features suddenly decided to block something that Audition was trying to do, crashing the program in the process. By turning off this security feature, the problem was solved. And I only had to do it once. Every time afterwards, Audition has opened without any problems when I simply open it from my desktop. Perhaps Windows now remembers not to block Audition in the future.
However, I have not restarted my computer yet, or logged off as Administrator. You may need to tweak this solution if you plan to do either of these things. You may end up having to "Run as" Audition every time you restart your computer or log off. You may even need to select the SECOND option, and run the program as Administrator with the appropriate password.
Anyway, this was the only post I could find on Adobe.com concerning this problem, so I thought I'd post my solution in case it helped someone else.

Adobe Audition, Audigy 2 ZS Platinum, can no longer hear guitar :-\

I've recently reformatted my computer, installed the Audigy 2 software, and installed Adobe Audition. Using Line In 2 on the front of my pc, I was able to plug in a guitar, and hear the guitar via headphones. I can use the remote's record button to instantly start recording, with no problems. I can also play audio using Itunes.
When I opened Audition, I immediately received errors saying that my audio device was not configured or whatever, and that I needed to select an audio device. So I went into the Audition settings, chose Soundblaster Audigy 2 [xxxx], specified Line In 2 for the input, applied and exited. Now I can no longer hear the input from my guitar at all, whether in Audition or not. I'm not sure what setting it might have changed on my pc, but any help would be great.

ntel352 wrote:
i opened Surround Mixer, clicked on the red plus (right over Master Volume), only option was "Digital Output Only", nothing else. Installed the latest drivers & software from creative, now I can't hear the guitar input at all. If I play the guitar and record in Audition, i can see the sound levels being elevated, but hear nothing whether in audition or not.
Other audio plays fine.
Audio is not muted for line in 2, line in 2 is selected in recording screen, line in 2 playback volume is not muted, yet somehow I can hear nothing from line in 2, and i don't have to be recording a single thing... It just doesn't play back.
I dunno what's going on, I haven't been messing with the settings or anything...Message Edited by intel352 on 01-27-2006 06:08 PM
Set 1st your .REC to AnalogMix(...) and then select this '+' sign --> untag the option like picture shows.
jutapa

How do I get the names of tracks I type in Adobe Audition 3 to copy to the Sony CD-RW CRX217E in myD

How do I get the names of tracks I type in Adobe Audition 3 to copy to the Sony CD-RW CRX217E in my Dell Precision Workstation 670?
I have recorded 10 tracks of voice with music using Adobe Audition 3 and Sony CD-RW CRX217E with no problem.
The problem is, however, that the names I type in Audition 3 for each of the tracks and artist do not copy to the CD I have recorded. This means that when I play the tracks on any playback equipment that shows the names of the tracks and artists, etc. all that appears on the screen is the track number, such as Track 1, Track 2, etc.
I am using a Dell Precision Workstation 670
Inter®Xeon
CPU3.2GHz
3.19GHz,2.00GB RAM
SYSTEM
Professional x64 Edition
V2003
SP 2, v.4354
Thank you
NoPro

Well, there is one possibility, but I can't absolutely confirm this. I had a look at the specification for the drive on the Dell website:
http://support.dell.com/support/edocs/storage/P89087/en/index.htm
and nowhere does it say that the drive supports CD-Text, I'm afraid. Even though all drives can in theory write this, a lot have the header hard-coded, and simply can't. Yours may be one of them, but I think you'll have to ask Dell to confirm this.

Edit in Adobe Audition Greyed Out in After Effects CC

The "Edit in Adobe Audition" is greyed out in After Effects CC. I imported an mp3 file into my composition, click on it and the link remains greyed out. The link works fine from Premiere Pro CC to Audtion.
Is there a setting somewhere I need to set?

Figured it out. For whatever reason the .sesx file extension wasn't associated with Adobe Audition on my Windows 7 machine. I changed this by double clicking on an .sesx file and adding the association.

Adobe Audition CC has stopped working. Constantly crashing.

Hi, I am constantly receiving an error 'Adobe Audition CC has stopped working.'
This usually occurs after an event whilst the sound is playing. ie change the playback location or edit an effect's parameter.
I am lucky to get a couple of minutes with it at the moment.
Below is an error log from event viewer. Please help if you can I feel like I have tried everything I can think of minus reformatting the PC which isn't an option atm.
Fault bucket 85922206367, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Adobe Audition CC.exe
P2: 6.0.0.732
P3: 518ade79
P4: StackHash_d339
P5: 6.3.9600.17031
P6: 530895af
P7: c0000374
P8: PCH_F5_FROM_ntdll+0x000000000009B13A
P9:
P10:
Attached files:
C:\Users\Jason\AppData\Local\Temp\WER3387.tmp.WERInternalMetadata.xml
C:\Users\Jason\AppData\Local\Temp\WER3F6F.tmp.appcompat.txt
These files may be available here:
C:\Users\Jason\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe Audition C_4e73248cb54b29482974202a58ba109ed3745a48_511190b7_32e25835
Analysis symbol:
Rechecking for solution: 0
Report Id: 0805b6e9-cbae-11e3-bead-083e8eaf94ce
Report Status: 1
Hashed bucket: 2e7e75ba0d14970691fdbf00062533ed

We can't help with this - it's an installation issue, and we're a U2U forum. Adobe's chat line is free for sorting out installation issues, and that's where you should get some help from. The only other alternative, if you can save the error log file (the whole of it, not just an extract) would be to send it to [email protected] and see if the developers can throw any light on it.

Adobe Audition CS6 (5.0.2) update patch released

Hey Audition friends!
This morning we released an update patch for Adobe Audition CS6. This update, version 5.0.2 for Mac and Windows, fixes several bugs discovered after release that could not be fixed in time for the earlier patch, and cleans up a few odds and ends to ensure Audition is fully compatible for use on Windows 8. Briefly, here are the primary bug fixes:
Metronone may skip or stutter
Windows registry entry missing backslash in path
Eucon/Avid Artist control surface touchscreen: Control of Surround Panner does not work
Bounce to New Track > Selected Track: New track is now based on channelization of source track
Windows 8: Third-party drivers do not have a valid WHQL signature
CD Burning: Removed 78 minute limit from CD Layout.
Audition may crash on Mac when exporting to OMF
Audition may crash when attempting to bounce a track with a channelization that does not match the Master track
You may install the update by selecting Help > Updates… in Adobe Audition CS6 or through the Adobe Application Manager tool. Additionally, you may download the patch installer directly for Mac and Windows.

Since 5.02 is an update, not an upgrade (there's a technical difference under the hood) then you shouldn't need to rescan for VSTs or anything - the new executable will use the same settings files. However, I would suggest NOT updating in the middle of a project as a good rule of thumb. If you choose to, I might suggest backing up the existing application files or folder so you could easily restore if you chose to. There were no major changes introduced between 5.0 and 5.02 except for some bug fixes to improve stability, so you'll probably be safe, but unless you're running into one of the specific issues described, my recommendation would be to wait.
As for your second question, I don't know the answer to that. What happens when you attempt to perform a mixdown? There was some work done for the 6.0 release that would have reduced problems when trying to mixdown with UAD and other instance-limited plugins. If you enable Track Pre-Render for those tracks, by clicking the lightning bolt icon in the Effects Rack or the "fx" view in the track panel for those tracks, do you still experience a problem?

Help For A Novice User Of Adobe Audition v.3

We purchased Adobe Audition vs. 3 to record programs to put on the radio. The trouble is I am a novice with this program.
Where do I go to learn how to use this program? The only thing I need for now is to know how to :
(1)Record a voice track
(2)Insert a track off a CD for an open to the program.
(3)Insert a track off a CD for a close to the program.
I only need the ABC's of getting started for now. Please direct me to the right source. Adobe wanted $39.00 to help.

http://www.lynda.com have some online training for Audition 3. I had a general subscription there and tried it out, and it's nice! It isn't free, but for little money you get up to speed very quickly and perhaps with a more hands-on approach that you'd prefer over reading yourself. We're all different.

Recording audio in Adobe Audition from a DVD played on Windows Media Player

I use Adobe Audition for audio production. I should be able to play a DVD via Windows Media Player and record the audio from it using Adobe Audition.
It isn't working.
I get a pop-up message indicating: INVALID ASIO INPUT (it continues to read) ! The selected input port or ASIO driver is invalid. Please change your settings in the audio hardware setup dialogue.
I tried that approach, and was not offered the ability to make that change.
Anyone have any ideas? My much older VAIO Sony computer handled this perfectly.
Thanks!

Hey Terry
in the corporate world wee have to contend with clients who are all windows based and prevented from installing anything on their systems.
I use Flip4Mac, Studio Pro HD, with the following mix of settings;
Open clip in QT, I do also use compressor but for some reason I like using QT for exporting to WMV.
File/Export
Export:movie to windows media
Use: One pass VBR, Presentation (high), 16:9
Options>
Advanced... input type: interlace Lower field first(DV), output type: progressive
Coding method: Two pass VBR
Give this a shot and then tweak to suit your needs, oh and you can save your settings as a preset for QuickTime.
Within Compressor there is no export to WMV, so you have to start with another setting and create your own saving it for future use.
Tony

Adobe Audition 3.0 change female voice to man voice?

Similar Messages

Maybe you are looking for