Adobe Audition 3 and Guitar rig 2?

Will these 2 work together?
I use Cubase normally but I would like to try Audition.
I would like to record a clean guitar track and then apply Guitar rig as vst or whatever will work.
Is it possible?

According to the Native Instruments website Guitar Rig 2 has both DirectSound and ASIO drivers.
Audition works with ASIO so you can either use the native ASIO driver or wrap the DirectSound driver with the Audition 3.0 Windows Sound or the ASIO4ALL WDM wrappers.
Of course you could download the Audition v3 trial and try it yourself (assuming you already own Guitar Rig 2).

Similar Messages

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

Audition CS5.5 and Guitar Rig 4/5

I've just installed AA CS5.5 as a trial, and I found a strange conflict with Native Instruments Guitar Rig VST plugin. The software recognizes the plugin smoothly in the plugin manager, but it just stays greyed out, so I can't use it.
I've tried with Guitar Rig 4 & 5, with no luck. Both work perfectly on Adobe Audition 3. I'm using Windows XP SP3 and M-Audio Fast Track Pro with ASIO drivers. Anybody experiencing the same issue?

Okay, I've spent some time this morning looking at Guitar Rig 5 in CS5.5 and CS6. Guitar Rig can install a lot of flavors of audio plug-in depending on your need. Audition only cares about the VST and Audio Unit (on Mac.)
There was an issue we found in Audition CS5.5 where some effects don't properly report their channelization. While not technically an Audition bug (it's part of the VST spec, I believe) we were not trapping these wayward plug-ins, which is why you saw Guitar Rig listed, but disabled. We addressed this issue in Audition CS6 by catching plug-ins that do not respond to channel requests as expected and assigning them as appropriate.
Guitar Rig is now enabled in Audition CS6 VST Effects List
More importantly, Audition CS6 opens up some pretty impressive effect channelization options which allow you to route the channels of a file into an effect in any manner you like. This allows you full control over which channel is assigned to which effect input, and which channel the output should be applied.
Feeding a 5.1 file into a Mono effect now enables precise control over channel routing.
Full control over 5.1 files into 5.1 effects as well. Any combination of channelizations and effects should work well.
Lastly, here's Guitar Rig 5 running in Audition CS6. While it definitely works, I do not recommend modifying this particular guitar track. Much like trying to pitch correct Freddie Mercury, Keith Richards guitar work does not benefit from additional processing

Duet and Guitar Rig 3 kontrol Edition

I recently purchased Guitar Rig 3 Knotrol Edition to use with Duet and I am in the process of setting it up. Can they both work together or do I have to disconnect Duet? After installing the software, I see RigKontrol3 in the Apple System Preference panel and in the LogicPro 8 Core Audio panel I also see RigKontrol3. Thank you.
Carlos

Sorry for the late post. I have plugged the guitar into a Waves PRS GTR via mic in cannon plug on the Duet, used the L/R audio outs to a power amp/cab for live audio and can still use the Guitar Rig controller via USB to make preset/effects changes. Also with this set up I can record to Logic, power down the amp and use headphones. Still experimenting with different configurations and other software gtr appz.

Bus and Aux and Guitar Rig 3

I am a little new to the whole idea of busing. I am getting Guitar Rig 3 and have read where I need to bus the audio to another track, as I record, to get the recorded effect. The track it is plugged into will get only a clean guitar sound recorded, and I need to bus the output to another track to get the effect recorded.
I read the manual and is it just as easy as selecting an output bus for a track and an AUX track just appears?
Any help would be great.
Thanks
RH

Guitar Rig shows up as an audio unit.
1. Create a new track.
2. Select that track.
3. Look at the leftmost column in the Logic window.
4. Right click on one of the buttons under the text that says "Inserts".
5. Guitar Rig is found under Audio Units->Native Instruments
Then double click the Guitar Rig button whenever you want to change a Guitar Rig setting. I believe that Logic does record the straight guitar track and applies Guitar Rig and any other effects on the fly.

I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match. How do I correct this?

I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match. How do I fix this?

I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.

Adobe Audition and EWQL Symphonic Orchestra Play Version Problem

I recently downloaded the new Play version of EWQL Symphonic Orchestra, Platinum version. This software works fine as standalone, but I'm getting error messages when I try and load it through the sequencer in AA3. I also have the earlier version with the Kompakt engine, and it worked fine. I can't figure out why I'm getting the following errors.
Runtime Error...C:\program files\.....\audition.exe
This Application Has Requested The Runtime to Terminate it in an Unusual Way...Please contact support team for more info...
then this
Microsoft Visual C++ Runtime Library
Runtime Error Program C:\program files\.....\audition.exe
R6025 - Pure Virtual Function Call
Does this make any sense to anyone?

Well, I'm no longer getting the first error, and Play now opens, but right after it loads an instrument I still get this error:
Microsoft Visual C++ Runtime Library
Runtime Error Program C:\program files\.....\audition.exe
R6025 - Pure Virtual Function Call
Am I getting warmer?

Guitar Rig 3 and Duet

I am trying to get Duet and Guitar Rig 3 v3.2.0 and Logic Pro 8.0.2 to work together. After selecting Guitar Rig3 in the Insert slot of the channel strip and enabling record, I am able to hear the guitar through the monitors but there is no GR3 sound effect. The GR3 Global Header does not display any in or out activity. But upon play back, I hear the GR3 effect on the guitar track.
I have been adjusting so many settings, I am afraid I might have set something along the way incorrectly - Perhaps in Maestro or in Logic Preferences? Also should Input Monitoring be selected? To make things simple, I unplugged the USB connection to the GR3 foot pedal. That will be a different project for another day. Any help would be appreciated.
Carlos

Hi,
software monitoring must be On in logic
Input monitoring must be off in maestro...
about your plugin (Guitar rig) ask ti NI support if you have priblem)
G

Adobe Audition CS6 and Alesis Multimix 8 Firewire choppy playback

I recorded a whole podcast using both Adobe Audition CS6 and Alesis Multimix 8 Firewire, and I originally played it back it was fine. Now after a week I play it back in Adobe Audition and the dialogue is choppy and repeating itself constantly every second. When I export it in a multitrack mixdown as a WAV file it still does the same choppy repeating thing. Has anyone else run into this problem who has a fix?
Thanks!

I don't use any Alesis products but have heard rumours in another forum that they're having some driver issues.
Maybe as an experiment you could export to a wave file and try playing that through your internal sound card rather than the Multimix. If playback is clean when not involving the Multimix that may suggest the problem lies in the Alesis gear. If the skipping is still there then something is likely going on within Audition.

Can I Use Adobe Audition CS6 with an Avid Eleven interface?

I have a PC and the Adobe Creative suite. I recently bought an Avid Eleven guitar Rack and computer interface. I have been having problems with Protools crashing, and apparently it is a common problem with Protools/PC. I like the Adobe Audition, and was wondering if I can use my Eleven with AA CS6? If so How do I get my AA to recognize/communicate with the Eleven?

Really, it's a Digidesign box. Apparently if you go into the hardware settings page in Audition it should be listed as an available ASIO driver by Digidesign. Beyond that though, I can't tell you whether it will actually work. If you haven't installed Audition yet, download the trial and give it a go. Report back, and then we'll all know!

Using Guitar Rig 5 in MainStage

Hello all!
I'm just getting started with MainStage, and so far quite liking the possibilities.
However, I've hit one thing which seems to be an issue for me, assuming I've understood it correctly. Each patch seems to have it's own channel strips, with it's own AU instruments etc... which to me seems a bad idea. Surely in this state, I will end up having hundreds of AUs running for the same software, which would slow things down?
On top of that, I'm running keyboard, guitar and vocal through Mainstage. All for me, as I switch what I'm doing depending on the song we're performing (and sometimes mid-song). However, this means I may sometimes want to change a guitar patch while keeping my keyboard the same, or vice versa.
So, to my question; is there a way to change AU presets without changing MainStage patch? I mainly need to do this with Guitar Rig 5 from NI, but I'd also quite like to do it with Massive and Reaktor too.
Not quite sure I've worded that very well, so an example:
I have a MainStage layout set up, which has my vocal going through clean with maybe some EQ etc. I've also got a guitar running through Guitar Rig 5, and my keyboard into Massive. During a song, I start off on keys playing Fat Bass 1 on my keys in Massive for the intro, switch to a distortion for the verse with my guitar, then Fat Bass 2 for the chorus in Massive. Maybe later I'll want a clean guitar in a bridge or something too, with some string hits thrown in from Massive again.
The way MainStage is set out currently, I'd need a patch for each combination, which would leave me with at least 3 "patches" for one song and three instances each of Massive and GR running. I'd much prefer to just send in a control message to change the presets in Massive and Guitar Rig.
Running on a 2014 15" MacBook Pro, 2.2GHz i7/16GB RAM/256GB SSD.
Thanks

I haven't been able to find a way to get it to work with Guitar Rig yet, but for Massive (and presumably Reaktor) I have found a solution. First, create an instance in MainStage, load it with Massive and load the presets you would like to use into Massive's preset bank. Turn it on so that it will respond to patch changes.
Navigate to the 'Assignments & Mappings' tab of the edit page. Find the device you want to use to send the MIDI CC messages. If it isn't in the list, click on 'New Assignment', which usually creates an Unmapped assignment in the 'All Devices' list. Click the area where it says No Assignment to bring up the Hardware Input popup menu. Choose your device, assign channel to 1-16, and change Type to absolute. From the number menu, choose the CC number you want to send the patch change. Set MIDI thru to Automatic. Name the input to something like CC to PG01.
Click on it to highlight the mapping info. In the far left side of the Control Inspector, you'll see a list of items such as Same as Input, Block, etc. You will also see the name of the instance containing Massive. Select it to bring up a list of control parameters, such as Volume, Mute, etc. From the list, choose MIDI Controller. The third item down in that menu is Program Change. Select it.
You'll see the Parameter values for Program Change. For saved value, select the Program Change number you want to send. Number scheme is 0-127. Now, here's the tricky part that nearly drove me mad before figuring it out. For NI instruments, one of the Range Max or Min numbers must be set to zero and the other to a non zero number. If you want to select PG 0, set saved value as 0, range max as 1 and range min at 0. For any other patch number, set saved value and range max to the same number and set range min to 0.
Also, make sure that the device thats sending your CC control message is configured as a toggle switch, not a momentary, or else it will send the range min program change number when you lift your foot or finger from the button. If you want to send multiple patch changes, add more mappings and assign different CC numbers to select the patch number you desire.
An additional benefit is that you can load up a single instance of Massive with as many presets as it can hold and use aliases of that instance for other songs. In this case you would create a new MainStage patch and populate it with an alias of your Massive instance. Set up a separate hardware input (I use logic remote) and rather than setting the number to a CC controller, set it to Any. By entering the same NI mapping parameters as above, it will send the correct PG info to Massive when you select the MainStage patch containing the alias. If you need to select multiple Massive patches from the new MainStage patch, simply assign the CC controllers to select new patch assignments. All that info is freely assignable and saved on a per MainStage patch basis, so your first instance could select the patch (say 0) and use three CC controllers to set patches 1-3. On the next MainStage patch containing the Massive alias, you could set the PG to select patch 4 and those same controllers can be set to select patches 5-7.

How to send a project from Final Cut Pro X, to adobe Audition

Anyone familiar with exporting a project or just audio from FCPX to Adobe Audition?

Thanx for your reaction. I want to edit Final Cut soundtracks in Adobe Audition and import them back again in FCPX.
I found out a good workaround.
First export the project as roles in separate files.
You can import these files in Audition; edit them etc.
Simple as that and no extra costs.

Downloaded Adobe Assistant Now What? Adobe Audition is not automatically downloading

I have installed Adobe Audition and it brings up a screen that says what products are you interested in with a drop down box, however according to instructions it states that the download of adobe audition is supposed to start automatically.
Maybe I am missing something in understanding the initial instructions.
Any help gratefully appreciated.

Troubleshoot Adobe Download Assistant
Mylenium

Problems Controlling Line in - Audigy 4, Adobe Audition

Hello,
I just recently got Adobe Audition version 2.0. I have been running my mics through a Fender Passport PA head, then into my computer for a while, with my default soundcard and Acoustica Mixcraft.
Now, I have an Audigy 4 (with the little box thing) and am using Adobe Audition, and I can't control the line in volume. I have tried messing with all of the line levels with the Creative console, the default windows controls, and even a third-party volume control, none of which works.
Please, if anyone has any clue what's going on, I'd much appreciate some sort of solution. I'm trying to record drums, and they're LOUD.
Thanks.

Software based level controlling:
In Audition, use ASIO drivers.
When ASIO is used, you can control input/recording levels through Audition (if there is a control for this) and through Surround Mixer (or Windows Playback control panels) Line-In Source slider -> i.e. the "recording level" setting in surround mixer does not have effect when you're working in ASIO mode (neither has wave source slider).
Hmm.. can't you also use Mixcraft controls for this, if you have routed your mics through it?
jutapa

Adobe Audition CRASHED. Multitrack is scrambled. PLEASE HELP!!!

Hello. Can someone please help me!!!
I Just finished editing my vocal tracks in Adobe Audition and the whole sound session was playing well I pressed save. The computer was saving all what I was working on but crashed. I re opened Adobe and all of my tracks are out of place and scrambled all over. Does anyone know what I can do to fix this? I listen to the tracks in edit view and the sound files sound fine. But it’s when in multitrack view all the sound files are scrambled.
Can someone please help me???
[email protected]
Thank You.

Hello Everybody.
Thank you therealdobro and Suite Spot for your responses.
After breaking down, leaving my house, storming through town, flailing my hands in the air, kicking the air and saying the F word multiple times I finally came home to then find myself breaking down some more on my hands and knees saying the F word more multiple times and crying on the floor worse then a little kid having a temper tantrum or someone having one of their body parts cut off. But I would mostly compare my actions to someone losing a loved one and breaking down mixed with a mental patient in an insane asylum in a strait jacket wanting to escape and go back to when things were normal and happy.
So as a few hours of insanity passed I then called a friend to ask of is there any way at all to restore my computer to a former date and time? My friend told me that I can use system restore. So I did. But long story short system restore didn’t work so I started to break down again but also somehow kept hope that system restore may just work if I keep trying. I kept trying multiple times but once again it didn’t work. I then finally had one last breakdown and decided to move all of my 35 tracks into proper place by ear and hand.
So… Ask me how I’ am doing now? Well… 10 hours later after putting the puzzle together by ear and hand I now have a finished song that sounds better than it did in the first place. I must give the glory to Jesus though because without him guiding me through this extremely torturing time I would still be curled in a ball sucking my thumb and wanting to die.
So once again thank you therealdobro and Suite Spot for your responses. And although I fixed it all by hand and ear, therealdobro you were right (Allthough I checked Adobe forums after I fixed it, lol) also thank you Suite Spot for volunteering to look into my session and see if you could do anything to fix it. I thank you a lot.
Ps. If any of you would like to hear the complete song when it is done being mastered let me know and I would be more than happy to show you.
GOD Bless In Jesus Name, Amen.
Signed: Chris Riss

Adobe Audition 3 and Guitar rig 2?

Similar Messages

Maybe you are looking for