Adobe audition 3... chanel R and L get mix during recording ?

Hi, I have the new Adobe Audition 3 intsalled.
I don't know what's happening... When I try to record a song it won't be recorded in Stereo, I mean both tracks R and L get mixed... For example on R there's a guitar sound and L the singer's voice, so when you listen to it, R and L give two different sounds... this is no problem for Adobe Audition 2 but in the 3rd version both tracks get mixed Both R and L will record the guitar sound and the voice together ! How can I solve this problem `???
Thanks a lot,
PErcy

How are you mixing down the input tracks to the master output bus?
Did you remember to adjust the pan knob for a mono input track so it is not sent to both master output channels equally?
A guitar is a mono input, it is up to you to decide how to place it in the output stereo field by using the pan knob. By default it will be in the exact center, equal amplitude on both the left and right channels. This could be described as "mono".
Can you be more specific about how you setup Audition to record the two inputs?

Similar Messages

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

Repair AGC (automatic gain control) Clipping Artifacts from DSLR in Adobe Audition CS5.5 | Short and Suite | Adobe TV

In this tutorial, Principal Worldwide Evangelist for Adobe, Jason Levine demonstrates how to detect, analyze and repair digitally clipped samples and distortions caused by AGC on your DSLR and other video cameras and audio-capture devices. Adobe Audition CS5.5's incredible tools for audio analysis and repair continue the application's legacy of fast, transparent, high-quality restoration.
http://adobe.ly/xPpEb2

Nope - doesn't work. Clipped samples show up in "Amplitude Statistics" but when I go to the Diag panel - select "DeClipper" and "Scan" - NO problems are detected.

Mail address's and names getting mixed up?

I have an account with over 10000 emails within it, lately names of senders & recipients are getting mixed up, i.e mail from J smith will show as coming from P smith but actual message is correctly from J smith.
I also have the account on my macbook (OD client with mobile account) and its all fine on there. Could my online account have some issues?

That's because you both use the same Apple ID. Settings>Store>Automatic Downloads>Off.

Open in wrong drive and/or getting stuck during startup

Please help!
My Mac OS X (10.4.11) has two drives: one for normal use and one for backup. For some reason my Mac keeps opening up in the backup drive. I go to System Preferences and click on Startup disk, and tell it to restart in the main drive, and it still opens up in my backup. It will eventually let me over after a dozen tries (give or take a few).
Once in a while it will freeze up during startup, get stuck during loading, or the fan will go into overdrive and I get nothing but a gray screen.

Whew! Sounds like a potential combination of needing to repair the drive(s) and zapping PRAM. What exact model of computer (OSX is the operating system, not the computer model)?
Boot from the installer disk, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. You can verify a drive from DU on your main drive while booted but I have found this can result in incorrect reporting of errors. To repair your drive you have to run it from a drive other than the boot drive anyway.
Next, boot from your drive in [Safe Mode|http://docs.info.apple.com/article.html?artnum=107393] and repair permissions. You can repair permissions while booted from the installer disc but this uses the permissions configuration on the installer disc which may be out of date if you have run any updates on your computer. Booting your computer to Safe Mode restricts the number of things running on your computer while permissions are being run and does a bit of spring cleaning at the same time.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
Once all is clear, you might need to reset PRAM.
[Texas Mac Man's PRAM, battery, PMU tutorial|http://www.geocities.com/texas_macman/pram.html]
[Apple's PRAM reset directions|http://docs.info.apple.com/article.html?artnum=2238]
If this helps you may also need to get a new PRAM battery but we need to know more about your computer hardware.

New iMac...trying to set up sound recording form the internet but my microphone isn't working for facetime. I have soundflower installed...recording into Adobe Audition. Can't seem to get them all working...any help?

I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows. Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
I've installed soundflower but now the micropohone is not working in facetime. What is the proper way to set all this up?
Thank you!
Frank

O.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back

Problem with Adobe Audition 2.0 and recording from a 1212m.

I bought a brand new machine and have be configuring it all week. Everything has been going well, except getting Adobe Audition 2.0 (the new version) to “hear” sound from the 1212m.
The intel 975 motherboard has an integrated HD sound system already on board and I have been able to get adobe audition to recognize it and record from it. This is what I have Windows XP Pro set to as my default sound card.
I installed the 1212m and I have gotten my monitors to work by using the XLR jacks on the monitors to the ¼ inch jacks on the 1212m using a VST (NI’s Kontakt 2) as the audio source. So it works.
What I can’t seem to get to work is getting Adobe Audition to “hear” the sound coming from the 1212m.
Patchmix seems to be working ok. The audio bars jump each time I hit a note on the keyboard.
I have configured Audition by going to Audio Hardware Setup and setting it to EMU ASIO and tried every combination of INPUT and OUTPUT, but when I hit the Record button in Audition it just flat lines..
I was hoping that once the audio made it from the VST though the 1212m and out to the speakers, that getting Audition to record it would be easy, but that hasn’t been the case.
The Intel 955 Extreme Edition and the 975 motherboard are brand new and I’m worried that being on the bleeding edge of technology, that one of the drivers isn’t working correctly and causing me hours of debugging a problem that is unworkable from my end.
Hopefully the problem is just some small stupid thing that I’m doing or failing to do (like normal).
Any ideas would be helpful.
thanks

I'm just saving it into a file in "My documents" on the internal hard drive. It's a computer in the office which has been used my other people before me and I have my own file which I was always able to save Adobe sound files into before, so I don't think it's anything to do with me not being allowed or read-only.
I've also been trying to save it onto USB hard drives. This works when I save it under a different name, but not when I'm just trying to update a file i've been working on. Basically I have to create a new file everytime I add something, so like "myaudit1", "myaudit2", "myaudit3" etc etc, even though it's the same piece of work just updated.
Hope that makes sense!

Adobe Audition 3.0 and Pinnacle 700 USB - How to record audio from VHS tapes???

Hi Friends,
I am new to Adobe Audition 3.0. I need your help.
Actually I am having a old Pinnacle 700 USB capture card. I want to record some audio in my computer by Adobe Audition.
I downloaded and installed required driver for Pinnacle 700 USB (for Vista).
But when I tried to capture audio from my VHS tapes, It not showing proper options. I don't know how to proceed further.
Could any one please help me... Please let me know what all I need to do.
Waiting for your helpful suggestions.
Thanks,
Yash

The Pinnacle is a video capture device and as such captures the video and audio into one MPEG or DV stream. Audition can't see it as an audio card and therefore can't capture audio directly from your video source. However once you have captured a video file using the Pinnacle you can probably get to the audio by using the Open Audio from Video command in the File menu in Audition.

Adobe audition upgrade and windows 7

Hi ,
i want to know if Adobe audition can be upgrade and works propely with Windows 7 or Vista ...
i will change my computer soon ... can i use it on two computers or do i must make a transfer ? (is it an obligation)
Tanks

Vince cb wrote:
i want to know if Adobe audition can be upgrade and works propely with Windows 7 or Vista ...
The only upgrade to 3 is the 3.0.1 bugfix. Generally Auditio works fine with 32-bit W7, but results with 64-bit have, from the reports recieved, been variable. I wouldn't put Vista on a machine at all - it's dreadful.
i will change my computer soon ... can i use it on two computers or do i must make a transfer ? (is it an obligation)
You can audtenticate Audition on a total of two machines, but you are only allowed to use it on one at a time (it says in the licence conditions). You can transfer authentication though - so you could remove it from your old machine, and re-authenticate in on the new one.

Adobe Audition 5, recording music software

Hi all, could anyone help me here,
I have adobe audition CS5.5 installed and it was working grand but last week with ampli tube 3 preset , I try to add drums and then record and it just keeps crashing, why is this?
I cant record anything now as it just keeps comming up saying adobe is not responding and then it just goes all slow and wont work for me.
Whats the problem? anyone? please

You'll get bettr answers in the Au forum.
Mylenium

Best audio gear to buy for adobe audition to make audiobook & podcast & elearning screencast ?

what is the best audio gear to buy for adobe audition to make audiobook and podcast and screencast video tutorials?
I will work alone with one microphone only in my bedroom.
Thanks

I'll assume that initially you won't want to spend a fortune, but also, you won't want stuff that you will later regret purchasing. And to do this sensibly, you'll want to spend a bit more money on the microphone than on the external sound device.
For a microphone, you could do a lot worse than to get a Rode NT1-A complete vocal recording solution. With the kit, you get a mic cable, shockmount, pop shield, a bag for it - and also a tutorial DVD, but you can safely ignore that... The kits are generally available at quite a competitive price, and Rode microphones have a good value-for-money reputation. You'll still need some sort of a stand, either desk or floor mounting - but they're easy to find.
For a sound device, you could consider something like the Focusrite Scarlett 2i2 USB interface. This has all the useful bits you'll need - like the ability to plug a pair of headphones into the front for direct monitoring. Focusrite kit has a good reputation, and isn't overly expensive for what it is. This is a basic solution that would actually let you use two mics if you wanted, so there's a little room for expansion if you need. If you want to spend less money there are options like the Tascam US-122 - but I'd personally spend just a little more on the Focusrite - they have better mic preamps.
Yes you'll need a pair of headphones, but here the choice is rather up to you, although I'd recommend that you look at Beyer and Sennheiser for clean consistent results, although they aren't the only ones. You need closed-back ones though if you use them near the mic - something like the Beyer DT-250 is a good choice, because they have replacable leads, and the feed is into one side of the headphone only - and they're comfortable.
Since I don't know where you are located, I don't know what this is actually going to cost you, but it's good basic kit that should last you for a while, and produce decent results without spending a fortune. Yes it's possible to spend a heck of a lot of money on stuff like this, but the law of diminishing returns sets in quite early, and you can get remarkably good results these days without spending a lot at all. There are a few brands that are generally better avoided, like Behringer. Nothing wrong with Behringer electronics, but they economise on their hardware, and invariably things like sockets stop working, and knobs fall off. Oh, and they use cheap level controls etc, and these become noisy quite fast. You get what you pay for - it's cheap but it won't last long before you experience trouble.

Popping sounds in the multitrack in Adobe Audition CC

I've been using Adobe Audition CC for a week now and have been having some problems with it. Sometimes there would be random pop sounds during the multi-track. The random pop sounds would sometimes come at certain sections of the multitrack, but I wouldn't hear them later. I would play the individual audio files and sometimes they weren't there. Does anyone know what could be wrong? Do I have to change some settings? I ran Adobe Audition 3 a few weeks ago on my Windows 8.1 system and never had any problems with popping sounds . With CC I get pops for some reason. I have a custom made computer that is supposed to have high performance. Is there anything I should change in bios mode? The multitrack that I'm using is around 40 minutes, and is on 11 tracks. I don't know if that has anything to do with that.
The computer I have is a custom made computer desktop that I custom made for working with music. It's an i7 and the most powerful computer I have ever owned. I have serious doubt that it's my computer. My computer is new and runs fast. As I said before, I'm running Windows 8.1 and it didn't have any problems with popping sounds when running on Adobe Audition 3 previously. I think it probably has something to do with bugs in the program itself. Has anyone experienced these problems? If so, did you fix them? Or does Adobe plan to fix them? I have contacted Adobe once through email and sent a complaint through Adobe Audition's support system and heard from nobody. So far, Adobe Audition has not sent me any patches or anything. Adobe Audition CC is insanely expensive. I'm paying around $220 or $240 a year for a program that already has serious flaws.

Hi there,
(My first post! I signed up/logged in specifically to ask about this problem, which I am also having.)
I am using an old Mackie mixer -> MBox 2 -> iMac. I have used this same basic setup for last few years, and this problem is sudden and new.
It sound like digital clipping/distortion, but is clearly not happening during the peaks of waveform. The input to Mbox is clear thru headphone monitor, I can't hear anything - but when played back, intermittent and audible pops/hits are happening.
My suspicion is that it is from the USB to the Mac; there are three USB inputs on the iMac and since the Mbox is powered via USB, I think the noise is being introduced there. I tried two outta the three ports (guess I should try the third - why did I stop there? Oh right - coffee!) So far I seem to have best luck when no other programs are running, restart the computer before every session, but otherwise I am just crossing my fingers!
I'll check back on this thread, as I need this ghost OUT of my machine! ~ Jim

Trouble creating a favorite in Adobe Audition 6.5

I'm trying to create a favorite in Adobe Audition 6.5 but I keep getting an error message that a favorite is already in the process of being created and that I need to stop recording the current one and start again. So I got to "Favorites" and then "stop recording", I get the message, "A new favorite could not be recorded because no supported actions were recorded". So I click ok and go back again and click on "Start recording favorite" but I get the same error message. Nothing I do can stop this error cycle. I've tried closing out of everything and going back in, but the error remains. Any ideas?

What exactly are you trying to put in your favourite? Not all things are possible...

Serial Key code for Adobe Audition not working

I purchases Adobe Audition CS6 last week and I keep getting the message “The serial number you entered is invalid. Please try again. Customer Service" The company Leximart that I bought CS6 provided me with a cserial key code that doesn't seem to work. Leximart is impossible to get a hold of by phone and there is nobody live to talk to at Adobe. Any suggestions?
Thanks.
Brad

Brad you can try registering the serial number to determine if it is valid. You can find details on how to register the serial number at Find your serial number quickly. If the serial number is unable to be registered then please contact the party which you purchased Creative Suite 6 from.

Can't Hear Myself Recording (In Adobe Auditi

I have the USB Sound Blaster External Soundcard.
When I open Creative Smart Recorder, it records me perfectly, and I hear myself, and successful playback and everything.
But when I try to record in Adobe Audition, I hear no sound results from my microphone when I try to record myself.
What's the problem? I tried to mess around with the settings (if those are the right ones), and Adobe Audition is perfectly fine, and my Sound Blaster software was just installed a few minutes ago.
I'd appreciate some help.

someone please help!!!!

Adobe audition 3... chanel R and L get mix during recording ?

Similar Messages

Maybe you are looking for