Adobe Audition 6 and Euphonix Controller V2

Hi,
I am using my V2 Euphonix controller with Adobe Audition 6, that works fine. The 4 faders are attached to the volume indicators of channel 1-4 in Mutltitrack view.
I am using Adobe to record radioshows. My voice on track 2, the music on track 1. While recording my voice on 2 I listen to the track-1 song, so that I can adjust my speaks to the intro of the record. Later I fine-tune that. Would be handy if I could use the track-1 fader to adjust the volume of track 1 while speaking, because at that moment I have the best 'feeling' on how the mix should be. But that seems not possible? In other words: Is it possible to attach the faders to the volume envelopes (yellow lines) of a track?
Thanks,
Henk
http://www.henkleppers.nl

The faders can be attached to separate Automation lanes, not the standard on waveform ones. To access these click on the twirl down arrow icon bottom left of track header beside the Read box. This will expose the full automation lanes. But you will probably need to read up on the help files how to record and playback the automation from there with your controller.

Similar Messages

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match. How do I correct this?

I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match. How do I fix this?

I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.

Adobe Audition and EWQL Symphonic Orchestra Play Version Problem

I recently downloaded the new Play version of EWQL Symphonic Orchestra, Platinum version. This software works fine as standalone, but I'm getting error messages when I try and load it through the sequencer in AA3. I also have the earlier version with the Kompakt engine, and it worked fine. I can't figure out why I'm getting the following errors.
Runtime Error...C:\program files\.....\audition.exe
This Application Has Requested The Runtime to Terminate it in an Unusual Way...Please contact support team for more info...
then this
Microsoft Visual C++ Runtime Library
Runtime Error Program C:\program files\.....\audition.exe
R6025 - Pure Virtual Function Call
Does this make any sense to anyone?

Well, I'm no longer getting the first error, and Play now opens, but right after it loads an instrument I still get this error:
Microsoft Visual C++ Runtime Library
Runtime Error Program C:\program files\.....\audition.exe
R6025 - Pure Virtual Function Call
Am I getting warmer?

Adobe Audition CS6 and Alesis Multimix 8 Firewire choppy playback

I recorded a whole podcast using both Adobe Audition CS6 and Alesis Multimix 8 Firewire, and I originally played it back it was fine. Now after a week I play it back in Adobe Audition and the dialogue is choppy and repeating itself constantly every second. When I export it in a multitrack mixdown as a WAV file it still does the same choppy repeating thing. Has anyone else run into this problem who has a fix?
Thanks!

I don't use any Alesis products but have heard rumours in another forum that they're having some driver issues.
Maybe as an experiment you could export to a wave file and try playing that through your internal sound card rather than the Multimix. If playback is clean when not involving the Multimix that may suggest the problem lies in the Alesis gear. If the skipping is still there then something is likely going on within Audition.

How to send a project from Final Cut Pro X, to adobe Audition

Anyone familiar with exporting a project or just audio from FCPX to Adobe Audition?

Thanx for your reaction. I want to edit Final Cut soundtracks in Adobe Audition and import them back again in FCPX.
I found out a good workaround.
First export the project as roles in separate files.
You can import these files in Audition; edit them etc.
Simple as that and no extra costs.

Downloaded Adobe Assistant Now What? Adobe Audition is not automatically downloading

I have installed Adobe Audition and it brings up a screen that says what products are you interested in with a drop down box, however according to instructions it states that the download of adobe audition is supposed to start automatically.
Maybe I am missing something in understanding the initial instructions.
Any help gratefully appreciated.

Troubleshoot Adobe Download Assistant
Mylenium

Problems Controlling Line in - Audigy 4, Adobe Audition

Hello,
I just recently got Adobe Audition version 2.0. I have been running my mics through a Fender Passport PA head, then into my computer for a while, with my default soundcard and Acoustica Mixcraft.
Now, I have an Audigy 4 (with the little box thing) and am using Adobe Audition, and I can't control the line in volume. I have tried messing with all of the line levels with the Creative console, the default windows controls, and even a third-party volume control, none of which works.
Please, if anyone has any clue what's going on, I'd much appreciate some sort of solution. I'm trying to record drums, and they're LOUD.
Thanks.

Software based level controlling:
In Audition, use ASIO drivers.
When ASIO is used, you can control input/recording levels through Audition (if there is a control for this) and through Surround Mixer (or Windows Playback control panels) Line-In Source slider -> i.e. the "recording level" setting in surround mixer does not have effect when you're working in ASIO mode (neither has wave source slider).
Hmm.. can't you also use Mixcraft controls for this, if you have routed your mics through it?
jutapa

Adobe Audition CRASHED. Multitrack is scrambled. PLEASE HELP!!!

Hello. Can someone please help me!!!
I Just finished editing my vocal tracks in Adobe Audition and the whole sound session was playing well I pressed save. The computer was saving all what I was working on but crashed. I re opened Adobe and all of my tracks are out of place and scrambled all over. Does anyone know what I can do to fix this? I listen to the tracks in edit view and the sound files sound fine. But it’s when in multitrack view all the sound files are scrambled.
Can someone please help me???
[email protected]
Thank You.

Hello Everybody.
Thank you therealdobro and Suite Spot for your responses.
After breaking down, leaving my house, storming through town, flailing my hands in the air, kicking the air and saying the F word multiple times I finally came home to then find myself breaking down some more on my hands and knees saying the F word more multiple times and crying on the floor worse then a little kid having a temper tantrum or someone having one of their body parts cut off. But I would mostly compare my actions to someone losing a loved one and breaking down mixed with a mental patient in an insane asylum in a strait jacket wanting to escape and go back to when things were normal and happy.
So as a few hours of insanity passed I then called a friend to ask of is there any way at all to restore my computer to a former date and time? My friend told me that I can use system restore. So I did. But long story short system restore didn’t work so I started to break down again but also somehow kept hope that system restore may just work if I keep trying. I kept trying multiple times but once again it didn’t work. I then finally had one last breakdown and decided to move all of my 35 tracks into proper place by ear and hand.
So… Ask me how I’ am doing now? Well… 10 hours later after putting the puzzle together by ear and hand I now have a finished song that sounds better than it did in the first place. I must give the glory to Jesus though because without him guiding me through this extremely torturing time I would still be curled in a ball sucking my thumb and wanting to die.
So once again thank you therealdobro and Suite Spot for your responses. And although I fixed it all by hand and ear, therealdobro you were right (Allthough I checked Adobe forums after I fixed it, lol) also thank you Suite Spot for volunteering to look into my session and see if you could do anything to fix it. I thank you a lot.
Ps. If any of you would like to hear the complete song when it is done being mastered let me know and I would be more than happy to show you.
GOD Bless In Jesus Name, Amen.
Signed: Chris Riss

Frequency Analysis on Adobe Audition CS5.5 for bioacoustics research

Hi everyone,
In need of some help.
I research whale/dolphin sounds, and have previously used Raven Pro for analysis. Ive found Adobe Audition produces a much better spectrogram (think it must be the FFT algorithm) and allows me to visualize a lot of whale calls that I may have missed previously by visual inspection on other software.
I need to measure these calls. Basically I need the duration (seconds), minimum frequency (kHz), maximum frequency (kHz) etc.
I have played around with the Frequency Analysis tool in Adobe Audition, and this cannot compute these figures for me at all. In Raven, it was extremely user friendly, and all you had to do was highlight the call by moving your cursor over and selecting the call, and in the left hand window, it would tell you the min F and max F and duration for that swatch that you had highlighted. Is there any way of doing this in Adobe? I know you can visually see on the right hand side the Frequency axis- but it doesn't give you the exact frequency i.e. I need it to be to 2 decimal places eg. 2.12 kHz minimum etc.
I have inserted a screen grab of what I mean when you "highlight the call".
Is there any way of doing this? I would be incredibly surprized if Adobe Audition does not have the ability to do so. But I have read through the manual and gone through a lot of threads and just can't find any information on it. Any help would be greatly appreciated!!!!!!!
Thankyou so much in advance
Bec.
p.s. Whilst Im asking, is there anyway to change the time format in the "Selection/View" box? Ive seen you can display it many many ways, but I need it in seconds, and the most sensible time format is mm:ss.ddd. Is there anyway I can change it to just ss:ss? There are a bunch of options for frame times, but nothing else for actual time.

becbioacoustics wrote:
I need to measure these calls. Basically I need the duration (seconds), minimum frequency (kHz), maximum frequency (kHz) etc.
I have played around with the Frequency Analysis tool in Adobe Audition, and this cannot compute these figures for me at all. In Raven, it was extremely user friendly, and all you had to do was highlight the call by moving your cursor over and selecting the call, and in the left hand window, it would tell you the min F and max F and duration for that swatch that you had highlighted. Is there any way of doing this in Adobe? I know you can visually see on the right hand side the Frequency axis- but it doesn't give you the exact frequency i.e. I need it to be to 2 decimal places eg. 2.12 kHz minimum etc.
I have inserted a screen grab of what I mean when you "highlight the call".
Is there any way of doing this? I would be incredibly surprized if Adobe Audition does not have the ability to do so. But I have read through the manual and gone through a lot of threads and just can't find any information on it. Any help would be greatly appreciated!!!!!!!
When you highlight a section, in the bottom right corner of the screen you'll find the timing section, and in there the box marked 'duration' will show you exactly how much time you've highlighted. In Frequency Analysis, the way to note highest and lowest frequencies is, unfortunately, manual and involves finding them with the cursor and noting the cursor information (under the display). If you open the advanced window, you'll get more information, including the level of the frequency at the cursor position. Also there's a bug in the display (or more to the point, the way it's calculated) which means that if you highlight just one section in the spectral view, this isn't what the Frequency Analysis display shows - I'm reporting that one.
p.s. Whilst Im asking, is there anyway to change the time format in the "Selection/View" box? Ive seen you can display it many many ways, but I need it in seconds, and the most sensible time format is mm:ss.ddd. Is there anyway I can change it to just ss:ss? There are a bunch of options for frame times, but nothing else for actual time.
No I'm afraid there isn't. I did try a cheat to see if I could at least get the timeline to do this, but that won't work either. Yes I think it should be there as an option too...

Adobe Audition CS5.5 Crash on Start-Up in Mac OS 10.10

I am getting this crash when starting up AA CS5.5:
Application Specific Information:
terminating with uncaught exception of type dvacore::filesupport::create_exception: $$$/dvacore/filesupport/Create=Could not create the file '@0'.
abort() called
The full crash code is here: AudobeAuditionCrashSMG - Pastebin.com
Has anyone had the same problem and is there a fix?
Thanks,
Shawn

The crash log indicates this occurs as Audition is trying to create the temp cache directories. Is this installation of OS X 10.10 an upgrade from 10.9? A common issue with OS X upgrades is invalid permissions on some user folders, so it's always worth checking this first.
Launch Applications > Utilities > Disk Utility.app and click on your main hard drive, then select "Repair Disk Permissions." This should scan and correct folder permissions and Audition may launch successfully after.
If this doesn't help, let's verify that Audition's preference files haven't become corrupted during the upgrade. Open Finder, click Go in the menu, hold down OPTION, and click on Library when it appears in the location list. Then navigate to Preferences > Adobe > Audition and rename the "4.0" folder to "4.0.BACKUP" or something similar. Then launch Audition once more and it should rebuild everything to its default settings.
If that still fails, let us know and we can continue troubleshooting.

Adobe Audition won't start C++ runtime error

Hi, I downloaded and used the trial version fine for the full trial time. Decided to purchase this weekend. It's not a cheap piece of software, so I'm hoping for some decent support here.
I managed to run the full unlocked version a few times without problems. I haven't installed anything else since it last ran. I did notice that it seemed slightly sluggish today.... then when I tried starting it later:-
Bang!
"Runtime Error" Program C:\Progra...
This application has requested the Runtime to terminate it in an unusual way. Please contact the applicaton's support team for more information"
I tried a complete uninstall, restart, reinstall... same error. I'm not finding anything relevant in this or other support forms. The error message isn't tellin gme too much either.
Help please!

OK, I worked it out. I just renamed the whole settings directory here:-
C:\Users\[username]\AppData\Roaming\Adobe\Audition\
and it lets me back in... don't what I've lost but at least I'm in phew.
Thanks for he help... cough.

Can I Use Adobe Audition CS6 with an Avid Eleven interface?

I have a PC and the Adobe Creative suite. I recently bought an Avid Eleven guitar Rack and computer interface. I have been having problems with Protools crashing, and apparently it is a common problem with Protools/PC. I like the Adobe Audition, and was wondering if I can use my Eleven with AA CS6? If so How do I get my AA to recognize/communicate with the Eleven?

Really, it's a Digidesign box. Apparently if you go into the hardware settings page in Audition it should be listed as an available ASIO driver by Digidesign. Beyond that though, I can't tell you whether it will actually work. If you haven't installed Audition yet, download the trial and give it a go. Report back, and then we'll all know!

Premiere Pro to Adobe Audition Dynamic link does not work. Cannot edit audio in Audition.

Trying to edit Audio from Premiere Pro within Audition thru the Dynamic link but it does not fire up Audition to edit. Seems like a common problem/bug. But no one has posted a solution. Please Help
-Windows 7
-Premiere Pro CC 2014
-Adobe Audition CC 2014

You dont understand it was all working fine in the previous Adobe versions. matter of fact you can go on youtube and see a couple of videos that shows the work flow between Premiere Pro and audition by way of Dynamic link. If you edit a video clip in Premier Pro and want to add some music or simply edit the audio that is contained in the video there was a time within Premiere Pro you can just right click "Edit in Adobe Audition" and Audition would open with the audio clip in place. Much in the same way Premiere Pro works with After Effects thru the Dynamic Link. The Dynamic Link is the bridge between applications to work with each other. For some reason Premiere Pro and Audition Dynamic Link is not working properly.

Need help purchasing Adobe Audition

Im trying to buy Adobe Audition and every time it says that there was a problem, its really stupid even when i called now one answer

Hi Oldies beat.
Oldies beat wrote:
Im trying to buy Adobe Audition and every time it says that there was a problem, its really stupid even when i called now one answer
What does the warning dialog box say?
Have you contacted support here? Contact Customer Care
I hope we can help you ASAP.
Thanks,
Kevin

Adobe Audition 6 and Euphonix Controller V2

Similar Messages

Maybe you are looking for