Adobe Audition, Audigy 2 ZS Platinum, can no longer hear guitar :-\

I've recently reformatted my computer, installed the Audigy 2 software, and installed Adobe Audition. Using Line In 2 on the front of my pc, I was able to plug in a guitar, and hear the guitar via headphones. I can use the remote's record button to instantly start recording, with no problems. I can also play audio using Itunes.
When I opened Audition, I immediately received errors saying that my audio device was not configured or whatever, and that I needed to select an audio device. So I went into the Audition settings, chose Soundblaster Audigy 2 [xxxx], specified Line In 2 for the input, applied and exited. Now I can no longer hear the input from my guitar at all, whether in Audition or not. I'm not sure what setting it might have changed on my pc, but any help would be great.

ntel352 wrote:
i opened Surround Mixer, clicked on the red plus (right over Master Volume), only option was "Digital Output Only", nothing else. Installed the latest drivers & software from creative, now I can't hear the guitar input at all. If I play the guitar and record in Audition, i can see the sound levels being elevated, but hear nothing whether in audition or not.
Other audio plays fine.
Audio is not muted for line in 2, line in 2 is selected in recording screen, line in 2 playback volume is not muted, yet somehow I can hear nothing from line in 2, and i don't have to be recording a single thing... It just doesn't play back.
I dunno what's going on, I haven't been messing with the settings or anything...Message Edited by intel352 on 01-27-2006 06:08 PM
Set 1st your .REC to AnalogMix(...) and then select this '+' sign --> untag the option like picture shows.
jutapa

Similar Messages

Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

I'd like to disable my expired trial for adobe acrobat pro XI because I can no longer view pdfs without getting a subscription

I'd like to disable my expired trial for adobe acrobat pro XI because I can no longer view pdfs without getting a subscription

Un-install Adobe Acrobat and repair the installation of Adobe Reader.

After updating old Touch to 3.1.3, can no longer hear on Bose Sounddock. How can I update to an earlier version?

After updating old ipod touch to 3.1.3, can no longer hear it on old Bose Sounddock. How can I reverse-update to an older version? Or, is there something else I can do? I can hear the ipod on earbuds, but not on the sounddock.

All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

TS4449 I can no longer hear music on my iPhone unless I use an ear piece could you please help

For a couple of days now I can no longer hear music (or if I play a video with audio) unless I connect an ear piece. I can't find anything in setting that turns this feature on or off unless I have some hardware problem. Help?

Try your volume buttons, if the slider does not show, then there is a short in the iPhone charging port. Clean charging port with toothbrush and small amount of isopropyl alcohol. If still problem the replacement part is iPhone charging port with flex cable, lower mic, and home button flex connector, all a single less than $10 part. Apple handles this problem with Warranty or AppleCare with Replacement iPhone 4S, if no coverage it will cost $199 for replacement iPhone 4S.

Since my last GarageBand update I can no longer hear the different software amps and effects while I am playing , but they can be heard when I play back the recording

So I can no longer hear the sofware amp/effects while I'm playing my guitar , but I can hear the software amps/effects during playback after I have done a recording . What's up ? This has happened after my last GarageBand update . I'm using an Apogee Duet .
Bryan

I am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .

I placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Can no longer hear any sound on my Hp mini

I think i may have deleted something by accident and i can no longer hear any notififcation noises or anything

Hello Bossman16,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have accidentally removed a software component from your notebook, and I would be happy to assist you in this matter!
To restore the sound on your computer prior to removing a file, I recommend following this document on Using Microsoft System Restore (Windows 7) or for (Windows 8). This should help return your system back to a restore point when your computer was able to successfully produce sound.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

When I edit a midi track and dig on a note, I can no longer hear it. Has something been turned off?

When I edit a midi track and dig on a note, I can no longer hear it. Has something been turned off?

If "digging" is "clicking" and if you mean to ask if anyone can hazard a guess as to what is going on in your particular version of Logic, then I'd say this little button
is not green anymore.

Audigy 2 ZS Platinum - can't record from front panel "mic-

I'm using an Audigy 2 ZS Platinum. I have an electric guitar plugged into the "mic-in" port on the front panel. I can hear the guitar through my speakers but I can't record from any program. I've tried using "Creative Wave Studio" and XP's "Sound Recorder" but it doesn't record.
I can record by plugging a microphone into the back mic-in port.
This is very frustrating, please help
--Dan

First is to set the Recording device to MIC2. The front panel device is considered the second microphone. Basically whatever program you use, I would assume it has to recognize this second microphone. Make sure you ahve it selected under the sound mixer (task bar Icon) "Line in 2/Mic 2" underneath "REC" on far right side. Then you can go from there.
|)O( Try this, if not use the old Hamer to Front of PC method, lol.

Audigy 2 ZS Platinum - Can't get breakout box to w

Hi, I bought an Audigy 2 ZS Platinum from a friend, and he had lost the driver CD. I connected it and used the drivers I got off Creative's website, and the card works perfectly, but I can't get the breakout box to work. I connected it internally to the card, I don't know what else is left to do. Are the drivers the problem, do I need a specific app to make it work, or is it maybe a connection problem?

Hey!?Big Problem... my break-out-box doesn't work any more, too.... but it is powered on!?There is no possibility to use the mute function, IR-control, CMSS-Control or to do anything else with it... simply dead, although it is powered on. LED is green and at the optical out i have a red one shining. I tried cleansweap and reinstall drivers, nothing changed the situation. Cable are correctly connected, i didn't change the last years. I'm also missing the extended connection possibilitys in my "sound and speakers" options... formerly there where a lot more, now there are only?fi've or six controller bars.WHAT HAS HAPPEND? Is it normal that there are three steps with the CMSS options like: CMSS, CMSS2 and STEREO SOUND? I remember that formerly there was also CMSS3... correct? Maybe this is another wrong thing... Any hints regarding this box and controller problem?Thanks a lot in advance,Alabaster

Audigy 2 ZS Platinum - Can't Play DVD-Audio Di

Please help!
I have a Sound Blaster Audigy 2 ZS Platinum set up. Everything about the card works great - with one exception: the only DVD-Audio disc I can play using the Creative MediaSource DVD-Audio Player is the demo DVD-audio disc that came with the card!
I have tried playing a couple of DVD-Audio discs that I bought, but I can't hear anything.
Is there anything I can do about this?

First is to set the Recording device to MIC2. The front panel device is considered the second microphone. Basically whatever program you use, I would assume it has to recognize this second microphone. Make sure you ahve it selected under the sound mixer (task bar Icon) "Line in 2/Mic 2" underneath "REC" on far right side. Then you can go from there.
|)O( Try this, if not use the old Hamer to Front of PC method, lol.

Adobe Acrobat 9.3.2 Update - can no longer see PCs on network (e.g. ping/offer remote assistance)

Hello - I just did the Adobe Acrobat 9.3.2 update in two different offices and the strangest thing happened while finishing 4 computers today.
I did the restart after installing the last update - 9.3.2 - and I can not connect to the computers again.
The workstations are Windows XP Pro SP3..on a SBS2003 network. The computers restart and the users can log back into the network and have no problems accessing network resources, Internet, etc. The only problem is that I can not ping the workstations from the server...I can not connect to the workstations from the server either. It's very strange how this has happened to the last 4 workstations today - when I had no problems with the other workstations yesterday.
I had the users restart the workstations several times - no luck - even shutdown/restart - no luck.
I am not in the offices to troubleshoot further in person....but I can have somebody be my "hands" onsite if need be.
Has anyone come across this before and know how to fix it - fingers crossed!!
Thanks!
Tammy

Make sure that registry values below are not set to 1:
"DisablePatch" in HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
"DisableLUAPatching" in HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
Good luck

After installing the DR Driver on my Audigy 2 Value, I can no longer access the Equali

Installed the latest driver via the web update for my Audigy 2 value. When I reboot my machine and try to access the equalizer, it gives me a message saying "The audio device supported by this device is not detected etc". It worked fine before I installed this driver.
Any help appreciated.
Gyre

Can you try rolling back to the previous driver (if you have a restore point), or reinstalling this update? Does that have any effect?
If you have any onboard audio make sure that's fully disabled in the BIOS aswell.
Cat

I can no longer hear alerts coming through unless my headphones are on due to the phone dropping in liquid which wasnt much to cover the phone. please help.

please help

Not sure what help you think the other users here can offer. You obviously water-damaged your phone.
You have a few options:
1) do nothing
2) purchase a new phone
3) bring your phone and $149.00 to Apple for an out of warranty exchange
4) find a 3rd party iPhone repair shop

Adobe Audition, Audigy 2 ZS Platinum, can no longer hear guitar :-\

Similar Messages

Maybe you are looking for