Adobe Audition Help | Connecting to audio hardware

This question was posted in response to the following article: http://helpx.adobe.com/audition/using/connecting-audio-hardware.html

A couple of things to check:
From the main menu select Edit > Preferences > Audio Hardware
Check the sample rate - usually 44.1k or 48k
Make sure you have selected an audio device - use the ASIO version of the driver if available
Next check the Audio Channel Mapping - make sure audio is being directed to the appropriate outputs
Then if in mulitrack view check the Output of the Master channel that it is going to the appropriate outputs
Then make sure you have armed the track to record and that the input source is pointing to whatever mic channel you have plugged in

Similar Messages

Adobe Audition will not play audio

After using Adobe Audition for a number of years I recently imported an audio file to edit but it won't play. I have rebooted, run only Audition and tried different audio files without success. What can I do?

I have reinstalled Audition and set the preferences to other hardware (both audio and cache) and it is working this morning. Not exactly sure what made it work (although I did say a brief prayer before trying it one more time this morning) but it is working.
Thank you for your help in working through the issue – it is much appreciated.

Blue Snowball USB microphone will not connect to audio hardware

My new Blue Snowball USB mic will not connect to the audio hardware in Premiere Pro. It connects well to my Mac but I cannot select it in Premiere Pro. Anyone know of a workaround or some help?

I was able to solve the problem by adding a Mono track first, then recording to that track. It's strange I have to do this, I have a Windows laptop at home that I use with CC 2014 and a Blue Yeti and Premiere just "knows" that I'm trying to record and makes the change.

Adobe Audition Help | Extracting audio from CDs

This question was posted in response to the following article: http://helpx.adobe.com/audition/using/extracting-audio-cds.html

Unfortunately that is correct in CS6. Hopefully it will be rectified in any future versions. Make sure that you request it in the Bugs and New Features request page.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Connecting to audio hardware

This question was posted in response to the following article: http://help.adobe.com/en_US/audition/cs/using/WS58a04a822e3e5010548241038980c2c5-7fde.html

olympe5864 wrote:
I think you need to look up Hindenburg.
Carolyn Adolph | Journalist | KUOW |o 206.221.0746 | c 206.550.1449
Carolyn, There are several programs that do what you are asking for, but none of them are competitors to Audition.
The reason you can't do what you want with Audition is because your laptop has been deliberately crippled because of pressure from outside agencies. I have several machiunes where it will work, and some where it won't..
What you ought to check is whether your Hindenburg program is actually always recording cleanly if you are using anything like Windows 7.
There are numbers of specialist audio programs for specific tasks. I have been involved in the past with journalist-specific features in programs that we sold.
As Steve said, record with your other program, but edit and process with Audition.

Adobe Audition Help | Working with markers

This question was posted in response to the following article: http://helpx.adobe.com/audition/using/markers.html

It sounds like instead of merging the markers you just turned each one into a range on its own.
Try this:
1. Add your single markers at all the relevant points in the file (include the very start and end of the file).
2. Open the Markers Panel and seelct all markers.
3. Choose to "Merge Selected Markers" (there is a button for this at the top of the Markers panel, or you can right click the selected markers).
This will merge all markers as you are expecting.
Now you can choose to export the audio within the marker rnages to individual files.
I hope that helps.
--Ron

Adobe Audition Help | Saving and exporting files (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/audition/using/saving-exporting-files1.html

stvns wrote:
Just to re-iterate the first three minutes of my audio has a marker called Marker 01, then the next 3 minute section is Marker 02, etc, so when I select all the markers, merge them, set the prefix and postfix to Track and 001 respectively, and click export, the audio that should accompany Marker 01, now as an exported wav file is Track_099 and Marker 99 is Track_001.
Hmm... just one marker to start with? At the start or the end of the time selection? The only way that I think your scenario could happen would be by there being no marker at the very start of the file, but in that case I don't see how you could include the first section (from zero time) anyway if you did that, so I'm a bit dubious... What would happen in this scenario would be that if you put in markers starting at 1 from the end of the first section, it would have to add a final marker for the start of the file, and this would be, let's say, marker 99. So the first file would start with marker 99 - but that would effectively be at the end of the batch ranges - if you see what I mean. But my real problem with this is that I don't see how you could include the first range in the audio at all without a marker at both ends of it. Now, what might have happened is that if you forget, and add the start marker after putting in all of the rest, then yes, you will get the above scenario - because markers are added sequentially and renumbering doesn't occur.
I've not had this problem - but there again I always start with a marker at zero before I convert to ranges. What should happen then is that it will take the marker label from the start of the range, and use that. The other thing you should consider is using the facility to rename the files - that should get around this completely as far as straightforward numbering is concerned.

Adobe Audition Help | What's new in CS6

This question was posted in response to the following article: http://helpx.adobe.com/audition/using/whats-new-cs6.html

In the "Flexible Effects Routing and Side Chaining" discussion above: the "how to" example seems a bit too short. I would add that when creating a multisession, you can select the "Radio VO with Music Ducking" template to automatically perform steps 2 to 5.
Also, Jason Levine, "Principle Worldwide Evangelist", presents a nice overview of the automatic re-"ducktion" of background music by using a voice over side-chain into a dynamic processing effect in this video:
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/whats-new-in-audition- cs6/
(starting at 8:22 in the time line)

Adobe audition help needed ASAP

Im am currently recording a audio book at 48000 24bit mono (as requested by individual) and i need to do three things and I'm not sure id=f the order is important and if I have extra steps not needed. Three things needed repair clipping, delete noise and normalize to -0.1
I have been running the restore lightly clipped and it seems to work fine but I notice it reduces the amplitude (no problem) I know I can normalize. I also need to extrac the noise with which I can use noise reduction, then I need to noramalize everything. Are these the proper steps or should I be doing it differently and if so how and why. I am doing this out of the country right now and internet is very slow and irregular so I patiently await any response anyone may have.
Thank you so much....

Moving this from the storage and sharing forum to Audition forum

Adobe Audition Help | Automating mixes with envelopes (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/audition/using/automating-mixes-envelopes1.html

In the Session Properties panel, change the Monitoring mode to External. This will disable the Audition-supplied monitor output.

Problem with Adobe Audition 2.0 and recording from a 1212m.

I bought a brand new machine and have be configuring it all week. Everything has been going well, except getting Adobe Audition 2.0 (the new version) to “hear” sound from the 1212m.
The intel 975 motherboard has an integrated HD sound system already on board and I have been able to get adobe audition to recognize it and record from it. This is what I have Windows XP Pro set to as my default sound card.
I installed the 1212m and I have gotten my monitors to work by using the XLR jacks on the monitors to the ¼ inch jacks on the 1212m using a VST (NI’s Kontakt 2) as the audio source. So it works.
What I can’t seem to get to work is getting Adobe Audition to “hear” the sound coming from the 1212m.
Patchmix seems to be working ok. The audio bars jump each time I hit a note on the keyboard.
I have configured Audition by going to Audio Hardware Setup and setting it to EMU ASIO and tried every combination of INPUT and OUTPUT, but when I hit the Record button in Audition it just flat lines..
I was hoping that once the audio made it from the VST though the 1212m and out to the speakers, that getting Audition to record it would be easy, but that hasn’t been the case.
The Intel 955 Extreme Edition and the 975 motherboard are brand new and I’m worried that being on the bleeding edge of technology, that one of the drivers isn’t working correctly and causing me hours of debugging a problem that is unworkable from my end.
Hopefully the problem is just some small stupid thing that I’m doing or failing to do (like normal).
Any ideas would be helpful.
thanks

I'm just saving it into a file in "My documents" on the internal hard drive. It's a computer in the office which has been used my other people before me and I have my own file which I was always able to save Adobe sound files into before, so I don't think it's anything to do with me not being allowed or read-only.
I've also been trying to save it onto USB hard drives. This works when I save it under a different name, but not when I'm just trying to update a file i've been working on. Basically I have to create a new file everytime I add something, so like "myaudit1", "myaudit2", "myaudit3" etc etc, even though it's the same piece of work just updated.
Hope that makes sense!

Any application that works like Adobe Audition or similiar?..

Hello guys. I'm looking for any applications working like Adobe Audition, or Acoustica MP3 Audio Mixer or Similiar (Music mixing apps). Can anyone give help me?. Thank you in Advance..

Have you searched the app store, i.e. search the keywords "audio mixer"?
You'll probably get better answers from an audio enthusiasts forum.

Air update fails for Adobe Community Help app

Hi,
Everytime I open Adobe Audition Help I get a popup telling me Adobe Air has an update for me to install:
Installed: 2.5.1.17730
Update: 3.3.0.3670
Everytime it fails to install saying I need to contact the administrator. Well, that´s me . Does anybody know what to do?
Kind regards,
Charles

Hi Charles: hmm... this is definitely an issue on the AIR side. Have you checked out the troubleshooting doc for AIR installations here?
http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.html
Also, there is a dedicated forum for troubleshooting AIR intsallations here:
http://forums.adobe.com/community/air/installation
Would you like me to move this thread over there for you? Or would you prefer to post this question to the experts over there directly?
Sorry I can't do more to help!

Audition "Help" not functional

While using Audition, -> Help (menu) and selecting any of the following does not do anything:
Adobe Audition Help... F1
Search...
Keyboard Shortcuts...
Glossary...
Nothing happens. No error messages, no nothing.
Yes, I've reinstalled once already with no "Help" functionality.
What am I missing ?
Please advise.
Thanks.
-HomerDawg

Hello HomerDawg.
This was a problem that affected a few Adobe products a while back (resolved January 2008). The answer, in my case, was to download and install an updated ahclient.dll:
"Help content does not open in Photoshop Elements 6, Premiere Elements 4, or Audition 3"
http://kb2.adobe.com/cps/402/kb402707.html
Click the link in the page to download.
I'm not sure, but the fix might also be included in the 3.0.1 update patch:
http://www.adobe.com/support/downloads/product.jsp?product=92&platform=Windows
It was a bit of a struggle to find this fix. It isn't on the updates page for Audition. I had to trawl through my correspondence at the time to find it.
I hope that this helps.
Steve.

Adobe Audition 3.0 "Audio Hardware Settings" for USB Audio Interface HELP!

Hi guys.
I’m after some help in the internal settings of Adobe Audition 3.0 whilst I’m trying to run my condenser mic through my ART USB Dual Pre.
I have the USB Dual Pre all set up in my Windows 7 set up (it automatically becomes the default recording device when it’s plugged in), phantom power enabled, XLR cable plugged into the right socket of the two available (is there any difference? I’m just recording voice tracking for radio announcements), headphones plugged into the monitoring jack at the back. Levels are turned up enough that they will pick up the noise, if there was any.
I go to the “edit” tab in Adobe Audition 3.0, hit record and nothing comes up. I’m not getting any sound at all registered on the computer. I’ve downloaded and installed Asio4All, but can’t for the life of me figure out the configuration within the “Edit > Audio Hardware Setup” to make the damn thing pick up my voice. There’s mention of Audio Drivers (Asio4All or Audition 3.0 Windows Sound), USB Audio Codecs, Input/Output… it’s enough to make a man who’s not very good at this sort of thing cry (ie. Me).
Could anybody help a body out, please? I think I’ve done everything right except the configuration within Audition itself. A helping hand would be GREATLY appreciated.
Thanks so much!

Hey there,
Thanks for your reply! I'm not too good at describing what I'm doing, so I've taken screenshots of all the options in "Edit > Audio Hardware Settings" under Edit View and Multitrack view. They include both Audio Drivers available (which were Asio4All and Audition 3.0 Windows Sound) and the associated Default Input/Output options, as well as the Audio Driver control panels and the options that were checked/unchecked on them.
If anybody could tell me how to configure this so I can actually record from my USB Dual Pre, that would be one better than I can do!
Thanks heaps.

Adobe Audition Help | Connecting to audio hardware

Similar Messages

Maybe you are looking for