Adobe Audition not retaining markers after saving

I'm slightly confused as to why Adobe Audition 3 won't save it's markers after I have closed and saved.When I reopen they are gone.
Many Thanks

What format are you saving as? Markers are only saved with .wav files. Is the little bottom left box ticked in the Save As page for "Save other non-audio information"?

Similar Messages

  • Comments in adobe reader not showing even after saving...

    Hi,
    We are using Adobe Reader X and have been emailed a document to comment on. We've used strikeout and replace, sticky notes and additional text commentary.
    We've been saving the document as we went along in a folder that we had access to (not the email temp folder) and when we closed the document and re-opened, none of the comments were showing at all.
    We then tried adding one comment, saving as a different file name, reopened and still nothing showing. We have als tried opening the same file in Acrobat - again nothing showing.
    At one point we added a comment box, saved it, reopened it and the comment box showed (fantastic - we thought).. so we added another.. closed and reopened and now only the first one shows and nothing else.
    This is becoming a little bit of a brain teaser and a bit frustrating as we fear we've lost all previous comments.
    Can you help?

    What happens now when you click the link or button to print checks? Does Firefox's PDF viewer come up or nothing happens at all?
    If you need to completely disable the viewer, there is a hidden preference you can change.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''pdfjs''' and pause while the list is filtered
    (3) Double-click '''pdfjs.disabled''' to toggle its value to true.
    If you test in your original tab, does that make any difference?

  • Iphone calendar does not retain entries after 2 months

    iphione calendar does not retain entries after 2 months

    OMG. I just did that sync thing and IT ALL CAME BACK!!!
    I only hoped it would fix it for future. Wow- where WERE those entries that they could return? Is that the Cloud.
    Thanks.
    Low-tech elder

  • Why is Adobe SendNow not working anymore (after using Adobe Send)?

    Why is Adobe SendNow not working anymore (after using Adobe Send)?
    Can this be fixed?

    We are concerned that you did not have a positive experience with Adobe Send. Can you share more information about your workflow so we can try to diagnose the problem?
    If you can provide some context on whether you were using the Adobe Send website or the integration with Adobe Reader? Can you share some details on the types of files and approximate sizes you were trying to send to your clients?

  • Edit in Adobe Audition Greyed Out in After Effects CC

    The "Edit in Adobe Audition" is greyed out in After Effects CC. I imported an mp3 file into my composition, click on it and the link remains greyed out. The link works fine from Premiere Pro CC to Audtion.
    Is there a setting somewhere I need to set?

    Figured it out. For whatever reason the .sesx file extension wasn't associated with Adobe Audition on my Windows 7 machine. I changed this by double clicking on an .sesx file and adding the association.

  • LR3 not retaining attributes after trip thru ext. editor

    Unless I'm missing some setting somewhere, LR3 does not retain the image attributes (color label, star rating) on a new file created as a result of a trip thru an external editor, ie PS. LR2 did.
    workflow:
    in LR3, filter down to your (for example) 4 star photos.
    select one, right click, select "edit in external editor". I pick Photoshop CS3 (I'm 100% DNG user).
    I have "edit a copy with LR adjustments" selected, as well as "stack with original". These are the same settings and process I did with LR2.
    Edit in PS. Save newly created .psd.
    Go back to LR3. PSD is missing, because it didn't get marked as a 4-star (or color, or whatever other attribute you've filtered by). You'll only see the pre-edited DNG, with the stacking icon in the corner telling you it is 1 of 2, but the second one is not shown.
    Unfilter the selection so you an see all photos. There you will find the just-created PSD as part of the just-created stack, but without the attributes that were set on the original DNG.
    So the result of this is when working with a found set, choosing to externally edit photos has them dissapear when the editing is complete. You have to constantly turn off selection filtering and go find the new file and tag it with the attributes that should have been carried over -- like LR 2 did - and then turn the filtering back on to narrow down to the set you want.
    Is this a bug, or am I doing something wrong?
    thanks-
    -Matt

    you can autosave XMP data. But at a penalty: everything you do is saved again and again during your editing with a speed penalty as a result.
    catalogue settings/metadata/ turn on automatically write changes into xmp
    Not that crazy are they? just some reading

  • Item category not change able after saving

    Hi guys,
    I have a problem (ECC 6.0).
    After saving a sales order, I'm not able to change the item category for the added item after saving the document. It's some kind of service material (DIEN) to charge labour to the customer.
    I found that if I maintain the MRP3 view with the strategy group 10, I'm able to change the category after saving. But as the MRP views are disabled for service materials (DIEN) and there's no need for MRP for service materials, I don't get rid of the problem.
    Please help me to solve that problem.
    Best Regards,
    Florian

    Normally If it is open sales order then you can able to change the item category provided manual item categories available in T Code - VOV4, if there are any subsequent documents are there then you are no longer to change the same.

  • Windows not retaining settings after 10.4.11 update

    Hello everyone,
    I just updated my PowerBook G4/667 Titanium to Mac OS X 10.4.11 (from 10.4.1) and everything is working fine but there is one annoying problem. Every time I restart, when I open some of the windows on my computer, they do not retain their settings - settings like the list view and window size, for example. Some folders DO retain their settings when I open them and some don't (like the Applications folder and the Macintosh HD folder/window which I have to reset every time I restart).
    I have to keep setting them to list view every time after a restart. How can I fix this so that they stay the same all the time? Does this have anything to do with the invisible .DS_store files? I don't understand why some windows retain their settings and why some don't.
    I've repaired permissions numerous times. Cleared cache files. Tried setting the "global" view from the Finder > View > Show View Options to "All Windows". Tried everything I know.
    Can someone please tell me what I can do to fix this?
    Thanks so much,
    Gerard

    Hi Gerard, and a warm welcome to the forums!
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, move these files to the Desktop.
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    Then reboot once more.

  • Serial Key code for Adobe Audition not working

    I purchases Adobe Audition CS6 last week and I keep getting the message “The serial number you entered is invalid. Please try again. Customer Service" The company Leximart that I bought CS6 provided me  with a cserial key code that doesn't seem to work. Leximart is impossible to get a hold of by phone and there is nobody live to talk to at Adobe. Any suggestions?
    Thanks.
    Brad

    Brad you can try registering the serial number to determine if it is valid.  You can find details on how to register the serial number at Find your serial number quickly.  If the serial number is unable to be registered then please contact the party which you purchased Creative Suite 6 from.

  • Adobe Audition not saving Meta Data

    I'm trying to save file information within an mp3 or wav file for our broadcast software (AudioVault) to read it and the information does not save.
    We use versions 1.5 and Version 3 and they both exhibit the same behavior.
    I have followed the info below but it doesn't work.
    The File Info command opens a dialog box in which you can see and add metadata—descriptive information that a computer can process and search—about the open audio file. For example, metadata can include history, loop, and Broadcast Wave information.
    For audio files in WAV, mp3, or CEL format, you can use the File > XMP Info command to add XMP metadata. This extensive metadata can be shared across databases, file formats, and platforms. (See Add or edit XMP metadata.)
    1. In Edit View, choose File > File Info.
    2. Click the tabs at the top of the dialog box to navigate between different sets of properties.
    3. Set properties as desired, and click OK.
    To preserve file information when you save files, select Save Extra Non‑Audio Information in the Save dialog box.
    It is not saving the start and end date. Here's what I'm doing. Open mp3 file. File-File Info, toggle text field names to Radio Industry.
    Fill out Description, Advertiser, start date, end date, click ok. click file, save as (clicking save extra audio infomation)
    now close the file and reopen it and the start and end date are gone. Ideas?

    After talking with BE I discovered that the following procedure will save
    the
    meta data providing it is saved in a WAV format (mp3 doesn't work.)
    Open your mixdown in the waveform view.
    Hit ctrl P and the wave properties window will appear.
    Fill out title, artist. Cut number, category and date.
    When you save as make sure save extra non-audio info is checked
    Then in the dropdown save as type choose WAV windows pcm.
    Your completed file can now be dropped into an AV import folder that should
    transfer
    Into the system with all the information in their proper fields.

  • Adobe is not working properly after cleaning out a virus

    After iyogi cleaned out a virus, adobe pdf insists everything is corrupt, re-loading saved files are getting corrupt error messages now that the system is clean.   [email protected] 12/2/13      

    Carlospipo
    A while back there was a thread which ended up in the same situation that you appear to be in.
    Premiere elements crashing when adding disc menu on a mac
    There does not seem to be a fixed answer in it. One suggestion seemed to be opening a new project which had no problems with the menus and that would trigger the problem project to work. From what you have written, it sounded like you have been there and done that.
    I think this is going to go to permissions and preferences. But, not being a Mac user, I do not have any first hand information on that.
    A common ground approach would be the deletion of the Adobe Premiere Elements Prefs file. But, haven't you done that already? Worth doing it
    again after all the recent troubleshooting?
    How many Timeline markers are you using? Have you allowed for at least a few frames between each marker....and no stop marker at the end of
    the last item on the Timeline?
    Please check out the above and then please let us know what is happening.
    Thank you.
    ATR

  • Partner funtions not coming up after saving the telesales order

    Hi All
    I have saved the sales order with product entry and entering all the manadatory partner functions. If I delete one of the partner fuctions at item level and again try to add that partner function, the related partner functions are not seen again.
    I have checked recurring option for all the access sequences to that partner functions . Please help me in this.

    Hello,
    Did you look for OSS notes on application area CRM-BF-PD? Depending on your CRM version, for example the following may fix your issue:
    Note 1035901 - Partner determination not complete at item level
    Note 716349   - Missing partner functions in the partner dropdown listbox
    Kind regards,
    Nicolas Busson.
    PS: I'm assuming that you are talking about missing partner functions in the corresponding field... and not that you are expecting the system to redetermine partner functions automatically after the order was saved (which is standart behavior).

  • Adobe Flashplayer not responding even after the download says the installation is complete

    I have tried to go on several websites and view content - Youtube, Slacker, and some websites that I need for educational purposes. When I try to view contact or upload a song, I get a message stating that I need the latest version of the Adobe Flash Player to do so. I have been through this process several times today, but each time that I download the Adobe Flash Player, it tells me that the installation is complete; however, I am still unable to view content or listen to the songs. I have restarted my computer several times and that hasn't worked. I can see that the Flashplay is listed on my add or remove programs in the control panel, but it is not responding when I enter into these websites. I have called technical support a couple of times today with no resolution to my problem. PLEASE HELP!!!! What can I do? Thanks

    Hi td, So glad that worked for you. That is always the first thing to look for as the SWO must be there and be the correct version, it is an absolute! Without that, FP will not work and you can take that to the bank:-) A lot of users get in trouble by trying every suggestion and dig a deeper hole and then it takes a lot of time and effort to recover.
    The process of a successful uninstall of the old FP and the install of the latest version, if followed is really easy. Most problems occur because some steps aren't followed.
    Adobe has the next FP update in Beta now, when it will come out I don't know, but post back if you like if you have any questions at that time. Preventive action is always easier than the cure, believe me. But with yours it appears you did a
    good job of installing the FP update.
    Thanks for marking this thread answered, it helps those looking for similar issues.
    Regards,
    eidnolb

  • Can not open pdf after saving scan from desk jet 3050

    I can open pdf file sent to me but I can not open scanned pdf files I scanned with my desk jet 3050 J610

    Hi Marymae07,
    Welcome to the HP Support Forums! I see you are not able to open up a saved pdf file once you save the scan with your HP Deskjet 3050.  To better assist you, can you please leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. What program are you using to scan, are you using the HP software or another program?
    3. Do you get any error messages when you attempt to save as pdf file?
    4. Are you able to save the scan in another format like jpeg?
    I will watch for your reply, so we can begin troubleshooting.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Adding metadata in Prelude but Premiere Pro not retaining it after closing

    While in Prelude in CC, I'm adding metadata in the Dynamic Media list; i.e., Scene, Shot Name, Shot Number.... I save the clips after each update and send it over to Premiere Pro by highlighting all the clips.  It arrives in Premiere Pro with the info attached and visible on the clip and in the metadata.  I save Premiere Pro and Prelude and when i reopen Premiere Pro there's no information there anymore; it's there in Prelude when I reopen that.  Not sure what's happening.  I did save the metadata separately also.
    Message was edited by: Layne Batt

    Hi Jenny,
    thank you for taking the time to reply.
    The media is from a Canon 7D  ( MVI_####.mov ) shot in full HD in
    1920x1080p at 30fr
    as I'm answering this email i'm checking that project... and now it's there
    again in full.  I was missing metadata in the first 3 rows of data
    information.... Scene, Shot Name & Shot Number.  I used those three columns
    because that was the order in the metadata check list.
    This is on my Win 7 computer w an Nvidia quadro fx 3800 card and 8 gigs of
    ram.... I am still having some of the same issues as well on my Mac OS
    X.... 12 core... I'll need to check that again too.
    I'm not sure if this problem will be persisting... right now it's
    inconsistent.  will continue testing on both computers... not ready to put
    it into my workflow yet.
    thanks,
    Layne

Maybe you are looking for