Adobe Bridge CS6 File Issues

Hello all, I just upgraded to the Creative Cloud on my PC, downloaded PS CS6 - Bridge and Camera Raw.  I'm configuring and working with CR2 files, no problem, however, Bridge will not let me delete, rename or update the metadata of my jpgs.
Any suggestions?
Captain

Curt, I'm running Windows 7 with 4 GB RAM - mother board won't support more than that.  I don't think permissions is the problem - same internal drive and the .CR2's work fine.  I can delete bad ones, batch rename and update the metadata no problem, it's just the jpegs.
OK, I have the same setup on another computer - same Bridge version, no problems with the Jpegs.  Issue here is, it's the backup computer and not my digital processing one with all the necessary drives.
Both computers are running Win 7 SP1 with 4 GB RAM 3.0 GHz processors.  Only difference is the digi system has 2 monitors.
Where would I check about "Read Only" for just the jpgs?

Similar Messages

  • Can't see CR2 files in Adobe Bridge CS6

    I have recently purchased Canon 5D Mark iii and have taken a few shots in RAW mode. When I try to open the file in Adobe Bridge CS6, I can't view the file.
    I also have a canon T2i and the raw file from that camera show perfectly fine.
    What could be the problem? All my CS6 software is up to date.

    Updated to ACR 8.4? There is an issue:
    The fix is to download a 8.4 again via the link below and follow the instructions to replace the existing 8.4 plugin:
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

  • Adobe Bridge CS6, Output to HTML Gallery coding issue.

    Adobe Bridge CS6, Output to HTML Gallery coding issue.
    I have created the html, JavaScript, css file using the output function in Bridge CS6, which nicely generates the coding, pages, folders and files. I can edit the html files such as gallery title, name, etc., in Dreamweaver CS6 just fine and preview them in a selected browser (both chrome and IE) and everything works fine.
    When I ftp upload the files and directories into my hosting account (Go Daddy), the images do not show up. The file table appears but the thumbs images does not appear and when selected to preview the larger image, it does not appear either. I have not altered the file structure at all. Go Daddy says it is a coding issue, but I cannot fine any errors.
    Have you seen this issue before? All Adobe help research have failed. Any suggestions??

    Have you asked on Go Daddy site for help in uploading Adobe Bridge script?  Just to say it is coding is not helpful. 

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Adobe Bridge CS6 has stopped working - has issue been resolved?

    Hello.
    I am experiencing the above problem with a new install of CS6.
    Has this issue been resolved?
    CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
    Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
    Thanks for any help you can provide.

    A follow up to the above.
    There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
    C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
    For those of you who may have this situation.
    Here is where I found the solution (sixth thread down):
    Bridge CS6 won't open running on Win7

  • Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

    Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version?  . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
    Thanks.

    A Good samaritan answered this for me on another forum
    How to update Camera Raw

  • Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

    Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

    Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

  • Adobe Bridge CS6 does not display WMF graphics files - what to do?

    The question says it all.  I am running Win7Pro 64bit with Adobe Bridge CS6.  This may be a windows/microsoft/wmf file format problem...but what to do?  WMF files display with a icon only.  Please advise.

    Apparently Bridge cannot preview .WMF files. I have old ClickArt CDs and occasionally want an image. So I have converted all the .WMF files to .AI using a script in Illustrator. Once converted, Bridge will display a thumbnail.
    Here is the script written by Carlos Canto. (Thank you Carlos, whoever you are!)
    Copy the script text. Paste in a plain text editor. Save as ConvertWMFtoAi.jsx in the folder Program Files: Adobe: Adobe Illustrator CS6: Presets: en_US: Scripts
    Then you find it in Illustrator under File: Scripts
    // script.name = makeAiFilesPDFcompatible.jsx;
    // script.description = opens and resaves Ai files with PDF compatibility checked (Folder Batch);
    // script.requirements = none
    // script.parent = CarlosCanto // 06/4/2013;
    // script.elegant = false;
    // script.forumPost = http://forums.adobe.com/thread/1224874?tstart=0
    var folder = Folder.selectDialog("Select Source Folder..."); // select folder
    if (folder==null) {
                        alert("Good Bye");
    else {
        var files = find_files (folder, ['.wmf']);
              var fileCount = files.length; // count them
              if (fileCount>0) {
                        for (i=0; i<fileCount; i++) {
                var idoc = app.open(files[i]);
                var saveOpts = new IllustratorSaveOptions();
                saveOpts.pdfCompatible = true;
                idoc.saveAs( files[i], saveOpts );
                idoc.close();
            alert(fileCount + ' file(s) processed');
              else {
                        alert("There are no Illustrator files in this folder.");
    // recurse subfolders - Peter Kharel
    function find_files (dir, mask_array){
        var arr = [];
        for (var i = 0; i < mask_array.length; i++){
            arr = arr.concat (find_files_sub (dir, [], mask_array[i].toUpperCase()));
        return arr;
    function find_files_sub (dir, array, mask){
        var f = Folder (dir).getFiles ( '*.*' );
        for (var i = 0; i < f.length; i++){
            if (f[i] instanceof Folder){
                find_files_sub (f[i], array, mask);
            } else if (f[i].name.substr (-mask.length).toUpperCase() == mask){
                array.push (f[i]);
        return array;

  • Adobe Bridge CS6 flickr export issue

    I am trying to export my pics from Adobe Bridge CS6 to Flickr. When I try to setup the a/c for the 1st time, it should take me to the Flickr website where it will provide me with a code that I put in a box to pair both. but in my case the Bridge is simply not doing it!! can anyone suggest any solutions for this? if it helps, I run Adobe Bridge CS6 on OS X Mavericks.
    Thanks,
    Keshav.

    I am trying to export my pics from Adobe Bridge CS6 to Flickr. When I try to setup the a/c for the 1st time, it should take me to the Flickr website where it will provide me with a code that I put in a box to pair both. but in my case the Bridge is simply not doing it!! can anyone suggest any solutions for this? if it helps, I run Adobe Bridge CS6 on OS X Mavericks.
    Thanks,
    Keshav.

  • Adobe Bridge CS6 crashing before starting 5.0.2.4

    Hi there,
    Adobe bridge is crashing for me before even starting.
    I'm running as an Administrator on Windows 7x64 and using the latest version of Bridge, 5.0.2.4
    It came with Adobe inDesign 8.0.2 which works perfectly, the only problematic app on the workstation is Bridge. 
    I do have a version of Adobe Photoshop CS2 also installed. I understand this was an issue that was supposedly patched by Adobe a year ago reading up on the forums but this problem still obviously exists.
    Even uninstalling all CS2 products and running CCleaner to wipe out all registry references to CS2 does not fix Bridge CS6.
    Adobe, please advice on what to do next

    System Info:
    Windows 7 x64 SP1
    Dell T1650
    8GB RAM
    Xeon E3-1220 V2
    Crash log;
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          Bridge.exe
      Application Version:          5.0.2.4
      Application Timestamp:          50d99f7a
      Fault Module Name:          StackHash_59c3
      Fault Module Version:          6.1.7601.17725
      Fault Module Timestamp:          4ec49b8f
      Exception Code:          c0000374
      Exception Offset:          000ce6c3
      OS Version:          6.1.7601.2.1.0.256.48
      Locale ID:          3081
      Additional Information 1:          59c3
      Additional Information 2:          59c39f5460f96c9e8c0a2e4cf426da4f
      Additional Information 3:          f054
      Additional Information 4:          f054c556062bcb3c14c6b443b38515c8
    Event Viewer log;
    Faulting application name: Bridge.exe, version: 5.0.2.4, time stamp: 0x50d99f7a
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
    Exception code: 0xc0000374
    Fault offset: 0x000ce6c3
    Faulting process id: 0x1fe0
    Faulting application start time: 0x01ce7e8d7553cc63
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: b3e6d539-ea80-11e2-92af-b8ca3a7791fa

  • Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

    Anything known on this issue? Solutions? Even importing files from memory card is a problem.
    In import window images are not diplayed as images but all the same blue mini images.
    vertical files are changed into landscape positions and more. Mac version.
    cj de vries

    Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
    Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
    created by Yammer in Bridge General Discussion - View the full discussion
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    THNX Problem solved

  • Adobe Bridge CS6 Mac cannot be launched

    Dear Adobe community!
    I just installed my brand new CS6 Design & Web Premium Suite on my MacBook Pro running OS X 10.8.3 and installed all of the available CS6 updates.
    Unfortunately I cannot launch Bridge  (version 5.0.2.4) from my account (admin privileges) - after double clicking the icon the application window shows up for just a fraction of a second and I receive a pop-up window saying something like "operation could not be completed successfully" (I am running a German language version).
    - Trying to start Bridge from PS results in the same error mesage.
    - Trashing the Bridge preference file did not change anything. 
    - Starting Bridge with the option key pressed and forcing reset of all parameters to default does not change anything.
    - Booting my Mac into safe mode (pressing shift key on startup) does not help.
    But creating a new user on my single-user Mac allows to launch Bridge when logged in to that new account.
    I'd be more than happy to receive some helpful coments from the experts around here!
    Oliver

    Update - problem finally solved!
    What happened in between:
    I started a chat session with one of the Adobe support guys. He said that the cause for the malfunction was most likely a conflict with permissions.
    After I told him that I had tried to repair permissions several times by Apple's Disk Utility without success he suggested me to copy the following file / directory from my newly generated "Test" user (under whom Bridge could be launched effortlessly):
    [username]/Library/Preferences/com.adobe.bridge5.0.plist
    and the whole directoy
    [username]/Library/Application Support/Adobe/Bridge CS6
    If that would not resolve my problem there was no other "cure" for my problem because of an irreparable permission conflict.
    After that I logged in under the new user "Test" and copied the mentioned files / directoy to a separate drive, logged in back as my standard user (the account where Bridge refused to start) and overwrote the files I had just exported before.
    Result: Same problems - Bridge refused to start as before.
    Dang...
    So there is no way to solve this problem like Adobe said?
    Presuming that the pending permission problem was the cause for my Bridge-issue I decided to "force" permissions:
    I went to OS X Finder, marked the home directoy of my problematic account, typed cmd + I to open the info window, went to the bottom section where permissions are listed, wnet to the user group "admin" and marked this group as "read and write" (it was read only before!) and chose the option to apply theses settings to all of the sub-directories and files (icon with the gear-wheel).
    After the changes where applied I restarted my Mac and logged in as my standard user and opened Bridge:
    Bridge started but showed the sub-directories of my "Test" account. So I shut down Bridge, deleted the com.adobe.bridge5.0.plist file from my standard account, rebooted my Mac - and voilà - Bridge works like a charme!
    FInally I wouldn't say that there was no "plan B"...
    Maybe this workaround can be helpful for someone out there!
    Regards,
    Oliver

  • Windows 8 Pro Adobe Bridge CS6 5.0.1.23 x64 not responding

    On my new SSD with a fresh install of Windows 8 Pro and Adobe CS6 Design and Web Premium, I regularly get a "(not responding)" warning in Bridge's (5.0.1.23 x64) title bar when opening a folder location, and the program takes around 10-20 seconds to display folder contents. This seems to be an indexing or caching issue, but I have not resolved it through the following fix attempts.
    In Bridge settings, I have placed the cache on the OS SSD at "C:\Users\York\AppData\Roaming\Adobe\Bridge CS6\Cache", and I have placed it on a separate internal physical HDD at "D:\Adobe Bridge CS6 temp cache". I have experimented with all other options (100% previews, export, manage, compact, and purge cache - restarting the app after each tweak).
    I have Ctrl-opened Bridge to access the "Reset setting" dialog box, where I restored default preferences and purged the cache. This did seem to alleviate the problem temporarily, but it did not resolve it.
    I have not uninstalled, repaired, or re-installed Bridge because it is not listed as a standalone app in the "Windows Control Panel > Programs and Features > Uninstall or change a program" window or the Adobe CS6 Design and Web Premium installer.
    My system is Intel i7-2600K, Asus Maximus IV Gene-Z, Nvidia GeForce GTX 560 Ti, 32GB RAM, Samsung 840 250GB SSD, various HDDs.
    My other system, an Intel Quad-Core Q6600, Asus P5Q-Pro, AMD Radeon HD 6950, 8GB RAM, Samsung 840 250GB SSD, various HDDs, does not have this problem.
    Any thoughts are appreciated.

    Thanks for the input, Curt. I have not changed the TEMP/TMP directories, which are set per Adobe instructions at http://helpx.adobe.com/bridge/kb/bridge-crashes-changing-temp-file.html. Temporary "not responding" freezes (10-20 seconds) are my issue. Crashes, as others are reporting due to the temp directories, are not occurring.  Other thoughts are appreciated.

  • Adobe Bridge CS6 display question

    I am a landscape photographer.  Many times I shoot multiple exposures of the same scene to combine them later in HDR.  These are generally 3 or 5 exposures taken at the same time.  It would be very useful to see each set of multiple exposures on a separate line in Adobe Bridge so I can quickly choose which set to use for processing in HDR.  Does anybody know how to do that?  I could not see it in the View options in the menu bar of Bridge.  I am using Adobe Bridge CS6 (5.0.1.21) on MAC OSX 10.6.8. Any help is appreciated. Thank you.
    www.ajitphoto.com
    Sunnyvale, CA

    It would be very useful to see each set of multiple exposures on a separate line in Adobe Bridge so I can quickly choose which set to use for processing in HDR
    You can't do so in Bridge when having different amounts of series. If you shot always 5 you could drag the content window to a new size in combination with changing the thumbnail size so 5 thumbs would show in a row. The same with 3 but there is no way to have a content window showing 1 line with 3 and 1 line with 5 files in the same panel.
    In filmstrip mode you have 1 single line but that does not meet you wishes also.
    There is the option to auto stack for HDR or Photomerge (Stacks / Auto stack Panorama-HDR) but frankly spoken this sucks because it either does not do the job properly or simply crashes Bridge to my experience.

  • Camera Raw Preferences in Adobe Bridge CS6

    I can click on Camera Raw Preferences from the Adobe CS6 Menu, but nothing happens. No error meesages come up, but nothing happens.
    I recently installed ACR7.3. I did have some problems getting ACR7.3 installed. The updater from Photoshop and Bridge didn't seem to install it.  I had to download ACR7 and install it.
    After the successful install of ACR7.3,  I can double click on an image in Adobe Bridge CS6 and it will open the raw image in ACR7.3 in Photoshop CS6.
    The other annoyance is that the images for my RAW files for my Panasonci GH3 don't display in Adobe Bridge. They appear as a blank icon
    I am running on a Mac OS X 10.6.8 64 bit
    Adobe Bridge CS6 5.0.0.399
    Adobe Camera Raw 7.3.0.71
    Adobe PS C6 13.0.4  x64
    I do have older versions of Adobe CS5 and CS4 that I have never removed. I've never had problems before. And didn't need the space so I just left them.
    Any ideas of why Adobe Bridge CS6 and ACR7.3 aren't in sync? - Thanks Rod

    Ok, everything was ok until I rebooted my machine. Now when I open Adobe Bridge CS6, The Raw images show up initially. But when Adobe Bridge finally gives me control, the images have become blank icons again. I've tried the CommandOptionShift and it does not help.  It was fine for two weeks and now I can't get the raw images to stay.
    Here is what I see as Adobe Opens the older. The Raw images are viewable.
    Now this is how they look after Adobe Bridge has finished opening and I can click on something:
    Where do I go from here?

Maybe you are looking for