Adobe Bridge CS6 Standard Browser wird nicht verwendet

Hallo zusammen
Ich habe ein Problem mit Adobe Bridge. Ich möchte eine Webgalerie erstellen und wollte die mal im Browser anschauen. Wenn ich aber "Vorschau in Browser" anklicke, wird der Flash Builder geöffnet, und ich kann die Galerie nicht ansehen.
Was mache ich falsch? Hat jemand einen Tipp?
Besten Dank im Voraus.

Hi Mylenium
System Info? Stehe auf dem Schlauch... In den Voreinstellungen in der Bridge habe ich keine Browser gefunden.
Oder wo kann ich das noch überprüfen?
Danke dir auf jeden Fall!
J_MO

Similar Messages

Adobe Bridge CS6 keeps zooming into previews

Hi guys. I'm using Adobe Bridge CS6 to browse some media content, but each time I preview a video, it plays zoomed in about 20% or so. It does this for all video clips, all sizes, no matter how I try to reconfigure the layout, use OUTPUT mode, FILMSTRIP mode, ESSENTIALS etc, it still shows zoomed in.
I'm running Win7 64bit with a GTX570 with updated drivers.
Please help. Thanks.

You mean 200 % instead of 20 %??
Use the loupe on an image and check what the default zoom percentage is, it should show 100 % and if it is at 200 % you have to use your mouse scroll wheel to set it back to 100 % (it runs from 100 % to 200, 400 and 800 %).
If your video files exceed the preview window you have to enlarge this window or if the behavior keeps this way consider to reset the preferences of Bridge holding down control key while restarting Bridge and choose reset prefs.

Browse in Adobe Bridge CS6 - default to 64-bit version

I have Adobe Bridge CS6 32-bit and 64-bit installed. I prefer to use the 64-bit version, but whenever I right-click a folder in Windows Explorer and choose 'Browse in Adobe Bridge CS6', the 32-bit version always opens. How can I make this default to the 64-bit version? There doesn't seem to be a way to uninstall the 32-bit version.

Edit your System Registry on:
HKEY_CLASSES_ROOT\Directory\shell\Bridge
Change the path that is pointing at 32bit version and set it to point at the location of 64bit version:
C:\Program Files\Adobe\Adobe Bridge CS6 (64 Bit)\Bridge.exe "%L"

Adobe Bridge CS6 wurde unerwartet beendet.

Adobe Bridge CS6 wurde unerwartet beendet.
Diese Meldung kommt bei jedem neuen Aufruf. Gibt es eine Lösung? Von Adobe kommt nur "Keine Lösung für diese Problem gefunden"

gib es hierfür bereits eine Lösung? Ich habe mit meinem Mac das gleiche Problem. Gestern wurde die Creativ Cloud installiert. Alle Programme funktionieren einwandfrei, nur Adobe Bridge nicht. Das Programm kann nicht gestartet werden und wird unerwartet beendet.
Vielen Dank im Voraus für eure Unterstützung!
Schöne Grüße aus dem schönen Bayern

Adobe Bridge CS6, Camera Raw

Hello,
I need urgently help.
I'm working on a MacBook Pro with Adobe Bridge CS6 since more than 1 year, using Camera Raw, v 8.6.0.254 without any problems.
Last month I bought a Mac Book Air and installed Photoshop Elements 12, Adobe Bridge CS6 and Photoshop CS6. But I'm still missing the possibility to open my pictures in Camera Raw.
After downloading the actual version 7.01 of Camera Raw from the website of Adobe.com and trying to install it I got the following error report:
UPDATE FEHLGESCHLAGEN;
Updates konnten nicht installiert werden. Dieser Path ist für Sie nicht geeignet.
Name of the downloaded program is: AdobeCameraRaw-7.1-mul-AdobeUpdate.
What shall I do to get Camera Raw running?
Thanks so much for your help
dieter

What camera and version of ACR?

Adobe Bridge CS6 has stopped working - has issue been resolved?

Hello.
I am experiencing the above problem with a new install of CS6.
Has this issue been resolved?
CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
Thanks for any help you can provide.

A follow up to the above.
There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
For those of you who may have this situation.
Here is where I found the solution (sixth thread down):
Bridge CS6 won't open running on Win7

Adobe Bridge CS6, Output to HTML Gallery coding issue.

Adobe Bridge CS6, Output to HTML Gallery coding issue.
I have created the html, JavaScript, css file using the output function in Bridge CS6, which nicely generates the coding, pages, folders and files. I can edit the html files such as gallery title, name, etc., in Dreamweaver CS6 just fine and preview them in a selected browser (both chrome and IE) and everything works fine.
When I ftp upload the files and directories into my hosting account (Go Daddy), the images do not show up. The file table appears but the thumbs images does not appear and when selected to preview the larger image, it does not appear either. I have not altered the file structure at all. Go Daddy says it is a coding issue, but I cannot fine any errors.
Have you seen this issue before? All Adobe help research have failed. Any suggestions??

Have you asked on Go Daddy site for help in uploading Adobe Bridge script? Just to say it is coding is not helpful.

Web Gallery creation in Adobe Bridge CS6 on iMac stopped working!

Why have my Adobe Bridge CS6 stopped working on my iMac and why is there strange code in the address bar when I click Preview In Browser?

You may want to post on the Bridge Forum when you have problems with that application.
Bridge General Discussion

Adobe Bridge CS6 Mac cannot be launched

Dear Adobe community!
I just installed my brand new CS6 Design & Web Premium Suite on my MacBook Pro running OS X 10.8.3 and installed all of the available CS6 updates.
Unfortunately I cannot launch Bridge (version 5.0.2.4) from my account (admin privileges) - after double clicking the icon the application window shows up for just a fraction of a second and I receive a pop-up window saying something like "operation could not be completed successfully" (I am running a German language version).
- Trying to start Bridge from PS results in the same error mesage.
- Trashing the Bridge preference file did not change anything.
- Starting Bridge with the option key pressed and forcing reset of all parameters to default does not change anything.
- Booting my Mac into safe mode (pressing shift key on startup) does not help.
But creating a new user on my single-user Mac allows to launch Bridge when logged in to that new account.
I'd be more than happy to receive some helpful coments from the experts around here!
Oliver

Update - problem finally solved!
What happened in between:
I started a chat session with one of the Adobe support guys. He said that the cause for the malfunction was most likely a conflict with permissions.
After I told him that I had tried to repair permissions several times by Apple's Disk Utility without success he suggested me to copy the following file / directory from my newly generated "Test" user (under whom Bridge could be launched effortlessly):
[username]/Library/Preferences/com.adobe.bridge5.0.plist
and the whole directoy
[username]/Library/Application Support/Adobe/Bridge CS6
If that would not resolve my problem there was no other "cure" for my problem because of an irreparable permission conflict.
After that I logged in under the new user "Test" and copied the mentioned files / directoy to a separate drive, logged in back as my standard user (the account where Bridge refused to start) and overwrote the files I had just exported before.
Result: Same problems - Bridge refused to start as before.
Dang...
So there is no way to solve this problem like Adobe said?
Presuming that the pending permission problem was the cause for my Bridge-issue I decided to "force" permissions:
I went to OS X Finder, marked the home directoy of my problematic account, typed cmd + I to open the info window, went to the bottom section where permissions are listed, wnet to the user group "admin" and marked this group as "read and write" (it was read only before!) and chose the option to apply theses settings to all of the sub-directories and files (icon with the gear-wheel).
After the changes where applied I restarted my Mac and logged in as my standard user and opened Bridge:
Bridge started but showed the sub-directories of my "Test" account. So I shut down Bridge, deleted the com.adobe.bridge5.0.plist file from my standard account, rebooted my Mac - and voilà - Bridge works like a charme!
FInally I wouldn't say that there was no "plan B"...
Maybe this workaround can be helpful for someone out there!
Regards,
Oliver

Why I can't do a search in my external hard disk using Adobe Bridge CS6?

When I open Adobe Bridge CS6 and try to do a search within my external hard disk, it will give results from my internal hardisk only?! this is the 1st time I encounterd such strange issue. Because of this I do my search with windows and then browse each result with Bridge! which really annoying.

I solved the problem by going to the search field and clicking on the search icon where it will give a drop list of 3 options, then selecting Bridge Search: Current Folder and that solved my problem. thanks for everyone help
Date: Wed, 14 Aug 2013 06:45:55 -0700
From: [email protected]
To: [email protected]
Subject: Why I can't do a search in my external hard disk using Adobe Bridge CS6?
    Re: Why I can't do a search in my external hard disk using Adobe Bridge CS6?
    created by Curt Y in Bridge General Discussion - View the full discussion
You can do a search of an external drive if the OS permissions are OK. Bridge will not search across different drives however.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5593774#5593774
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5593774#5593774
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5593774#5593774. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Bridge CS6 on Retina Display

I just installed Photoshop CS6 Extended on a Retina Macbook Pro and updated Bridge, Camera Raw, and Photoshop with the latest updates. In Photoshop, everything looks crisp (including Camera Raw when opening it from Photoshop), but Bridge is still blurry. In addition, when opening Camera Raw from Bridge, everything is blurry. There are no updates available for Bridge/Photoshop/Camera Raw when I check for updates...any ideas on fixing this?
Adobe Bridge CS6 - 5.0.2.4
Adobe Photoshop CS6 Extended 13.0.6 x64
Adobe Camera Raw 8.3.0.141

There is no such thing. In CS6 only PS itself is Retina compatible. You would have to use CC for full Retina support.
Mylenium

Adobe Bridge CS6 display question

I am a landscape photographer. Many times I shoot multiple exposures of the same scene to combine them later in HDR. These are generally 3 or 5 exposures taken at the same time. It would be very useful to see each set of multiple exposures on a separate line in Adobe Bridge so I can quickly choose which set to use for processing in HDR. Does anybody know how to do that? I could not see it in the View options in the menu bar of Bridge. I am using Adobe Bridge CS6 (5.0.1.21) on MAC OSX 10.6.8. Any help is appreciated. Thank you.
www.ajitphoto.com
Sunnyvale, CA

It would be very useful to see each set of multiple exposures on a separate line in Adobe Bridge so I can quickly choose which set to use for processing in HDR
You can't do so in Bridge when having different amounts of series. If you shot always 5 you could drag the content window to a new size in combination with changing the thumbnail size so 5 thumbs would show in a row. The same with 3 but there is no way to have a content window showing 1 line with 3 and 1 line with 5 files in the same panel.
In filmstrip mode you have 1 single line but that does not meet you wishes also.
There is the option to auto stack for HDR or Photomerge (Stacks / Auto stack Panorama-HDR) but frankly spoken this sucks because it either does not do the job properly or simply crashes Bridge to my experience.

Adobe Bridge (CS6) - bulk action - JPEG Options must be OKed for every image

Hi all-
I created an action script for a watermark in Photoshop CS6. Then, I ran my script as a bulk action in Adobe Bridge (CS6) against my JPEGs. However, the JPEG Options dialog/window appears for every image in PS. Is there a way to have this automatically OK (and at the highest quality) so that I don't have to sit and click OK over and over?
I am on a Mac btw.
Thanks!

Please help

Camera Raw Preferences in Adobe Bridge CS6

I can click on Camera Raw Preferences from the Adobe CS6 Menu, but nothing happens. No error meesages come up, but nothing happens.
I recently installed ACR7.3. I did have some problems getting ACR7.3 installed. The updater from Photoshop and Bridge didn't seem to install it. I had to download ACR7 and install it.
After the successful install of ACR7.3, I can double click on an image in Adobe Bridge CS6 and it will open the raw image in ACR7.3 in Photoshop CS6.
The other annoyance is that the images for my RAW files for my Panasonci GH3 don't display in Adobe Bridge. They appear as a blank icon
I am running on a Mac OS X 10.6.8 64 bit
Adobe Bridge CS6 5.0.0.399
Adobe Camera Raw 7.3.0.71
Adobe PS C6 13.0.4 x64
I do have older versions of Adobe CS5 and CS4 that I have never removed. I've never had problems before. And didn't need the space so I just left them.
Any ideas of why Adobe Bridge CS6 and ACR7.3 aren't in sync? - Thanks Rod

Ok, everything was ok until I rebooted my machine. Now when I open Adobe Bridge CS6, The Raw images show up initially. But when Adobe Bridge finally gives me control, the images have become blank icons again. I've tried the CommandOptionShift and it does not help. It was fine for two weeks and now I can't get the raw images to stay.
Here is what I see as Adobe Opens the older. The Raw images are viewable.
Now this is how they look after Adobe Bridge has finished opening and I can click on something:
Where do I go from here?

Adobe Bridge CS6 crashing before starting 5.0.2.4

Hi there,
Adobe bridge is crashing for me before even starting.
I'm running as an Administrator on Windows 7x64 and using the latest version of Bridge, 5.0.2.4
It came with Adobe inDesign 8.0.2 which works perfectly, the only problematic app on the workstation is Bridge.
I do have a version of Adobe Photoshop CS2 also installed. I understand this was an issue that was supposedly patched by Adobe a year ago reading up on the forums but this problem still obviously exists.
Even uninstalling all CS2 products and running CCleaner to wipe out all registry references to CS2 does not fix Bridge CS6.
Adobe, please advice on what to do next

System Info:
Windows 7 x64 SP1
Dell T1650
8GB RAM
Xeon E3-1220 V2
Crash log;
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Bridge.exe
Application Version:          5.0.2.4
Application Timestamp:          50d99f7a
Fault Module Name:          StackHash_59c3
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec49b8f
Exception Code:          c0000374
Exception Offset:          000ce6c3
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          3081
Additional Information 1:          59c3
Additional Information 2:          59c39f5460f96c9e8c0a2e4cf426da4f
Additional Information 3:          f054
Additional Information 4:          f054c556062bcb3c14c6b443b38515c8
Event Viewer log;
Faulting application name: Bridge.exe, version: 5.0.2.4, time stamp: 0x50d99f7a
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x1fe0
Faulting application start time: 0x01ce7e8d7553cc63
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: b3e6d539-ea80-11e2-92af-b8ca3a7791fa

Adobe Bridge CS6 Standard Browser wird nicht verwendet

Similar Messages

Maybe you are looking for