Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What

Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
It
Win 7 x64 Pro
CS6
Thanks

Good luck with that, and don't forget to deactivate CS6. 
My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten!  What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers.   They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays.  I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
The Premiere Pro hardware forum is the perfect place to ask about stuff like that.  Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing. 
So I wish you good luck again, and I know you'll make a plan before going ahead with it.

Similar Messages

  • Adobe Bridge CS6 Stopped working.  Fault Module Name: StackHash_0a9e

    It's just typical.  I'm up against a deadline and this happens.
    If I try to open an image in Camera Raw, check the colour settings, get into the camera raw preferences this is the result:
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    Bridge.exe
      Application Version:    5.0.2.4
      Application Timestamp:    50d99f7a
      Fault Module Name:    StackHash_0a9e
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    0018f890
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    2057
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Adobe bridge has stopped working windows 8

    I recently installed adobe bridge cs6 on a windows 8 computer and when the program launches and i browse to a folder with images I see "adobe bridge has stopped working" and the program crashes. Any Idea what I can do to solve this?

    I am having this same problem, but I am using windows 8.1  (64 bit) -  Toshiba Click 2 pro, 1920 x 1080 resolution.
    I just installed Design Standard CS6, everything said these would be compatible,
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.html
    https://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaul tFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=adobe%2Bdesign%2B standard%2Bcs6&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance& Compatibility=Unknown&LastRequested=14
    but I"m having problems with Bridge CS6, Acrobat X, Photoshop CS6 64-bit and Illustrator 64-bit.
    What to do?!

  • "Adobe Bridge has stopped working"

    Just installed CS2 Version 9.0.  Having "Adobe Bridge has stopped working"  Windows 7 Pro 64.  Is there a solution to this problem?
    Thanks?

    Curt,
    Thanks for getting back to me.
    Bridge had worked before.  When I refer to BRIDGE I mean that I go to a
    folder of photos in PS and select file/browse to open.  This feature
    does work with other folders of photos.  It was when I downloaded photos
    from my cell phone into a folder and in PS went to file/browse the
    browser will open and then I get a message "Adobe Bridge has stopped
    working."
    I can still go to another photo folder in PS and select file/browse and
    it will work, the problem is with the photos from my cell photo.
    Do you have any ideas.
    I have the latest  versions of PS.
    Thanks,
    Jack

  • Adobe Encoder CS6 stopped working, not start.

    Hello,
    I have a PC with the following characteristics:
    Motherboard: Intel DX58SO
    CPU: Intel i7 2.97GHz
    RAM: 8 Gb
    Hard Disks: 2 in RAID (7200RPM)
    The problem is:
    Adobe Encoder CS6 stopped working, not start, what can I do?
    No works wanting to export from Premiere CS6 or opening it alone.
    Thanks

    Good luck with that, and don't forget to deactivate CS6. 
    My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten!  What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers.   They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays.  I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
    The Premiere Pro hardware forum is the perfect place to ask about stuff like that.  Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing. 
    So I wish you good luck again, and I know you'll make a plan before going ahead with it.

  • Why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

    why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

    You might get more help asking in Audition CS5.5, CS6 & CC
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Bridge CS6 stops working keywords are updating???

    Everytime I try to update the keywords I always get an error and then Bridge shuts down!  Very frustrating!  Any suggestions?

    Curt - thanks for your time and suggestions!
    The reset was unsuccesful for either BRidge or Bridge (64).  IT still did the same thing - closed the program down!
    Here is the event log...
    Faulting application name: Bridge.exe, version: 5.0.1.23, time stamp: 0x505aadb6
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
    Exception code: 0xc0000374
    Fault offset: 0x000ce6c3
    Faulting process id: 0x2524
    Faulting application start time: 0x01cdc9d92f4bf692
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 8522233f-35cc-11e2-bcbc-3c970e1837f0
    Details:
    System
    Provider
    [ Name]
    Application Error
    EventID
    1000
    [ Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2012-11-24T00:18:50.000000000Z
    EventRecordID
    15708
    Channel
    Application
    Computer
    Deleted for security
    Security
    EventData
    Bridge.exe
    5.0.1.23
    505aadb6
    ntdll.dll
    6.1.7601.17725
    4ec49b8f
    c0000374
    000ce6c3
    2524
    01cdc9d92f4bf692
    C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
    C:\Windows\SysWOW64\ntdll.dll
    8522233f-35cc-11e2-bcbc-3c970e1837f0

  • Adobe InDesign CS6 stopped working

    Up until late last year I was able to export to EPUB format without problems. Later on, when attempting to export to EPUB, I began receiving the error "Adobe InDesign CS6 has stopped working".  Even after reinstalling InDesign, the error persists.  Any suggestions?

    Sir,
    I have uninstalled and reinstalled multiple times. I also removed preferences and all other methods that are on the adobe websites. The only way I was able to access it was to add another user to my laptop and install using administration permissions. But I cannot access it from the original side which is the problem.
    Mustapha Williams
    [email protected]
    University of Tennessee Knoxville
    College of Architecture and Design

  • Adobe Bridge CS4 stopped working after Mavericks 10.9.3 upgrade

    I don't know if it is due to the upgrade today or something else, but since upgrading, I cannot use the file folder function in adobe bridge cs4.
    The files are on the drive and can easily be found in finder but the favorites in bridge and folder function in bridge does now show a choice of User folder to drill down to the files.
    Anyone know if this is related to the new upgrade?
    If so, I guess I'll have to cave in and buy LIghtroom or switch to iPhoto?
    Thanks
    Tom

    Thanks for the tip.
    I had already checked there and they were as puzzled as I was.
    There was an article in macworld.com this morning that addressed it...it's not just adobe, it's a problem some folks are having with the udate on either osX or itunes causeing the Users folder to become hidden.
    The article gave a sudo command to unhide it.
    Thanks,
    Tom

  • Bridge cs6 stops working in win 7

    Bridge freezes and only way to make it work is to reboot the computer. and then it freezes again.
    I use win 7
    Any solutions?

    Try checking for permissions on these folders one by one:  C:\Users\Current_User\AppData\Roaming\Adobe\Adobe Illustrator CSx Settings
    AppData
    Roaming
    Adobe
    Adobe Illustrator CSx Settings
    Permissions on above folders should be R & W.
    If these settings are fine then check for permissions on these folders at location: C:\Program Files\Adobe\Adobe Illustrator CSx\Presets\
    Adobe Illustrator CSx
    Presets
    Permissions on above folders should atleast be 'Read' or 'Read & Write' both.
    This might help. Since, it works for you using different user account then it is definitely a user permissions issue.

  • Web Gallery creation in Adobe Bridge CS6 on iMac stopped working!

    Why have my Adobe Bridge CS6 stopped working on my iMac and why is there strange code in the address bar when I click Preview In Browser?

    You may want to post on the Bridge Forum when you have problems with that application.
    Bridge General Discussion

  • I can't run adobe bridge cs6.  Weeks trying to get Adobe support - no help

    I read something about people using cc being able to move a folder from common files to the bridge folder and that fixed their problem.  Not so lucky on my end.
    It's been 4 weeks, something like the equivalent of 5 - 7 DAYS on hold, never reaching anyone who actually knew how to fix this. 
    I had cs6 properly installed for a couple of weeks on my win7 desktop and my win8 laptop (both 64 bit).  Then out of the blue, bridge just stopped working. 
    Although I've done everything I've been told -- uninstalled, run cc cleaner from adobe, reinstalled. Done that multiple times, and once through every folder on the computer to eliminate adobe stuff, then reinstalled and no luck.  Tried moving the folder, no luck. 
    Bridge won't even load - it just gives me an error message and there's no way I can load it.  Adobe insisted that I create a new admin and install PS and BR there.  It did work, but did not allow me to use my main login and run bridge.  So If I want to use bridge + a program other than a CS6 program, I couldn't do it.  No help whatsoever.
    Please help.  I've gotten the case escalated, but adobe never calls or if they do call (they tried once or twice), they don't leave a phone number and they usually call outside the hours you suggest are the best for reaching you.  I keep having to start at the beginning, with the low level techies, and after several hours, I can get them to take my number and schedule a call with the escalation / senior team.
    I want the CEO or someone to realize how badly they are abusing their "customers".  BUT right now I need to get some work done.  I don't want to invest the time to set colors for my monitor or do any customization because they'll just ask me to wipe it again anyway. 

    Hi,
    I don't know why there's a problem seeing the content of my original post, but I am logged into the forum, not using email.
    When I try to launch bridge, I get an error message that says "Adobe Bridge CS6 stopped working" and the following details:
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          Bridge.exe
      Application Version:          5.0.0.399
      Application Timestamp:          4f5ec28e
      Fault Module Name:          Bridge.exe
      Fault Module Version:          5.0.0.399
      Fault Module Timestamp:          4f5ec28e
      Exception Code:          c0000005
      Exception Offset:          000000000036ae49
      OS Version:          6.1.7601.2.1.0.256.48
      Locale ID:          1033
      Additional Information 1:          dca5
      Additional Information 2:          dca5eef3eb4639786ac397e2f866e6e1
      Additional Information 3:          ffe3
      Additional Information 4:          ffe33cae3dc9a74a841b6be78d093ff8
    Of course, Bridge never actually launches.
    As far as the fact that some setting on my computer is incorrect, I'd love to find that magic switch to fix it, but remember that this happened after Bridge was properly installed and working for a couple of weeks after my purchase, and it died on BOTH my win7 desktop and my win8 laptop.  Different OS, different hardware, both Dell and both 64 bit. 
    I've been very careful about having administrator privileges on both computers, and to my knowledge, I didn't install anything new between the time I installed CS6 and the time Bridge died.  I'm very slow to update windows, after it wiped my partition and nearly cost me all my data and photos...  I research like crazy, and I don't understand this.  But I use photoshop and illustrator in combination with other programs so I can't have a situation where I can't be logged in as me using bridge.
    Please give me your thoughts - any hints are appreciated...  fyi - adobe low level phone tech support has been playing hold music for the last 194 minutes.
    Thanks!

  • Folio Builder-Indesign CS6 stopped working

    Hey to everybody!! Every time that i want to open Folio Builder it keeps appearing the same thing. Adobe Indesign CS6 stopped working. I don't know why. I tried to reinstall digital publishing suite in case if some of the archives were damaged but i can't find a solution to my problem. Any suggestions?
    The rest of the applications of digital publishing suite work just fine.
    Thanks,Orestis

    Thanks for replying! But I already found my solution! After a few weeks of frustration and putting this message online I found out that it was the default printer that caused the error. Normally I use a printer from my university network as my default printer, but this caused the error since the computer is not always connected to that network. Now I put the Microsoft XPS Document Writer as default and everything works fine.
    I run the Adobe Creative Suite CS6 on Windows 7, my error log showed the following:
    Faulting application name: InDesign.exe, version: 8.0.0.370, time stamp: 0x4f72c3ee
    Faulting module name: AGM.dll, version: 4.26.18.19553, time stamp: 0x4f3a0265
    Exception code: 0xc0000005
    Fault offset: 0x0024d0cd
    Faulting process id: 0x1508
    Faulting application start time: 0x01ce4905ac3f0ca2
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
    Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\AGM.dll
    Report Id: 211d7fdd-b4f9-11e2-bd34-e02a822ba99d

  • **Bridge  Has stopped working

    I'm having a problem with my Bridge. As soon as I attempt to open I recieve an Error message "Adobe Bridge has stopped working" (it won't even open). I'm running Vista and I've never had this problem. I recently added a printer drive for Epson r-1800. Has anyone had this problem before.

    you should probably check in the bridge forum...
    http://www.adobeforums.com/cgi-bin/webx?14@@.3bb8a3bf

  • Bridge suddenly stopped working

    Hello everybody,
    My Adobe Bridge just stopped working without any reason.
    An hour ago i used it without any problems, now when i start it, the program freezes instantly and the only thing i can do is close it.
    I read the sticky topic on it, and i tried installing the newest graphic driver and removing 3rd party plugins. I couldn't find the preferences so i could not reset them.
    Does anybody have any idea how i can make my bridge work again ? Because this is REALLY annoying.
    Thanks in advance !
    Kindest regards,
    mambo88

    Yes i am, my pc settings are pretty much the same as when Bridge worked.
    It was really weird; i was just using PS and Bridge untill i was finished. Then i closed both, but after a while i remembered i had to do some additional photoshopping so i opened both programs again. Ever since then bridge wouldn't start anymore.

Maybe you are looking for

  • HT5954 I cannot view images

    I cannot see any images/pictures on the VRBO website  http://www.vrbo.com any ideas? they appear as black boxes with a little question mark in them HELP! thanks! Lu

  • Vendor Trail Balance

    Does a vendor trail balance include the special Gl transcations as well like advances paid etc.  or should the vendor trail balance only include the normal vendor line items? what is correct? Thanks

  • Remove element from multi-surface

    Hi there, I am trying to fix some invalid multi-surface geometries that are derived from a 3D source, many of which have ORA-54514: overlapping areas in multipolygon.  I can find out which subset geometry (aka the element in this context) is causing

  • OATS distributed load test agents

    Hi, 1) I am preparing to perform a distributed load test on web application. full load is 500 users. How many agent test servers do I need for this test? How do i determine the number of servers, as I can't find any best practices or guide online. 2)

  • Target Group to Channel - Trying to use 2 channels when only 1 is specified

    I have created a Target group and then in the marketing planner create a campaign. Under the channel I have specified Phone which is linked to creating a transaction. I activate the campaign and then choose target group to channel. The job is schedul