Adobe Bridge - Export - Manual Scale - Image Size Option

I would like to use Adobe Bridge to export a batch of images to a fixed height (e.g. 400px) where the width is dynamic. There are other software programs that would give me this option, but It would be wonderful if this "small feature" could somehow be added to adobe photoshop.
Thank you,
jjchinquist

Hello 1.csuebele, thanks for the comment.
I was surprised that this was in Photoshop and not in the Bridge, but that is ok.
I was not allowed to leave the width blank, nor enter -1 or 0 for variable. I worked around it by using a width that was so large, it would never be used because the maximum height would be used. For example width: 9000, height: 400.
Unfortunately in Photoshop scripts, there seem to be no method to override the image proportion so that I could force a thumbnail of 400 wide and 300 high.
After all that though, here is the result, thank you. http://www.ots.at/jahresrueckblick/2013/

Similar Messages

Is it possible to export an HDMI image size?

Is it possible to export an HDMI image size?

Enter the required dimension in; Inspector > document slide size.
1024 x 768 is HD-TV pixel dimension, but there are other graphics sizes you can set for higher resolution.
Note that you need to set up the slide size first before you add objects on the slide, otherwise they will be distorted when the size is changed.

Newbie: In printing dialog, "Scale to" size options are greyed out

I am in the initial stages of figuring out how to use Aperture (v1.5). I am currently trying to make a 5x7 print of a photo.
In the print dialog, "Scale to" 4x6, 5x7, 8x10 size options are greyed out (only "fit image" and "fill entire page" are available).
I've tried searching through the forums, but to no avail...
Thanks!

Click the Arrange button on the toolbar and select the desired option.

Snow Leopard, iPhoto, Mail - loss of image size option when mailing photos

I just installed Snow Leopard on both my laptop and my desktop. Now I have lost one of the size options when I email images directly from iPhoto. This is a big problem for me, as I have the need to send photos out to colleagues for their review several times per week. Before the new OS, I could choose (from within iPhoto or from within Mail) from these options: small, medium, large, and full-size. "Large" was the choice that almost always worked best for me. Now an image is medium-sized no matter whether you choose medium or large. Small and full-size still work.
If I add images to a mail using the photo browser in Mail (which is less convenient for me anyway), then I lose the titles and descriptions I have added to those images in iPhoto. Not good.
Is there a setting I can change, or is this a bug, or what?
Help.
Marion

Ernie,
It's not the the image size buttons are not available. They are. It's that they don't work correctly. From within iPhoto: choosing "small" gives me a small image; choosing "medium" gives me a medium image; choosing "large" also gives me a medium image; choosing "full" gives me a full-size image. So, there are four buttons, but only three sizes. I need large, and it's the one that's not working.
I am currently experimenting with your export-attach suggestion, and the results are very messy indeed as well as inconsistent. If I export an image as .jpeg and as full-size, and then attach them to a mail, the first problem is that I lose all the titles and descriptions, even though I have chosen to export them. In the past, all the images lined up neatly in the body of the message with titles underneath each one; now the images are all "stuck together" and you must mouse over to get the title info. Thus you can see this info for only one image at a time - inconvenient for my colleagues.
The second problem is that, the size option buttons work for some images and not for others. I tried attaching three files of different sizes: 2.7MB, 5.2MB, and 6.2MB. All four size buttons work for the two larger files, but, once again "medium" and "large" choices both result in the same size image, "medium."
Even if the export-attach option worked correctly, it would involve many more steps and much more time than my former method of sending direct from iPhoto.
I have not upgraded to iLife9. Perhaps the problem has been corrected in it. I was holding out for iLife10, but might go ahead with 9 if I could be assured it would work. This is really a huge problem for me.
Thanks,
Marion

Adobe Bridge CS4 pops error when Update Option from Help is launched

Hi All,
when i m trying to Launch the Update from the help menu of Adobe Bridge it pops-up with a error messge instead of launching update.
The error says
Adobe Bridge
Bridge is not in a position to check for updates.
The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
Ok
Please help what is the probable cause for this.
I have tried disabling the updateoption by
1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
I am using Vista Build is the behavioural diff seen on XP n Vista
Thank You

Hey
Apologies I dont think I had made myself clear.
I am trying to package Adobe Photoshop CS4 which has Adobe Bridge as a component. As per the company standards, I am suppossed to be deploying this package & installing it using silent setup. Since this is a corporate environment, they do not want any auto updates to be enabled, as well as disable all menu items related to updates. Hence I had checked through the Adobe Support Site and followed the instructions provided by using the Adobe Deployment Toolkit and supressed the updates using the tool.
Inspite of following the steps mentioned in the Deployment Kit and the guides associated with it, I was unable to supress the Updates options that reflects under Help Menu for Adobe Bridge CS4. All the other associated programs like photoshop, Extend Scripts etc the updates are disabled. The problem seems to be only with the Adobe Bridge Update.
I have also tried disabling the update option by
1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
Inspite of trying the above steps the update option in the menu is still enabled and when I click on the updates menu item I get the following error message.
Adobe Bridge
Bridge is not in a position to check for updates.
The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
Ok
Please advise,

Embed Adobe Bridge CS5.5 web image gallery into Dreamweaver site

Please help! I have been reading forums and trying to find the answers to my problem for days! I have created an image gallery in adobe bridge cs5.5 and have used an iframe to embed the gallery into my dreamweaver site. When I preview my site the gallery works, but after I've uploaded the gallery to the server the gallery no longer works. I have read multiple adobe forums with no success. Please help! Thanks!

I'm not sure I completely understand your problem, because linking to a Lightroom gallery is actually very simple.
Design your Lightroom gallery and upload it to your server. Just do it directly from LR. Let's suppose you have uploaded it into [your webroot folder]/galleries/test/.
Don't rename any of the index files.
Check it has actually worked, by visiting http://celestialapple.zxq.net/galleries/test/index.html with your browser.
Create a link to the gallery on your home page. The source code for the link is <a href="/galleries/test/index.html">Other Photoshop gallery</a>
And that's it already.
Cheers,
Michael

No "image size" option from pictures taken with front camera?

When e-mailing a picture taken with the rear camera, I am prompted to choose an "image size." However, this option does not come up for any photo taken with the front camera.
Is this a bug or how it is supposed to function, or am I doing something wrong?
"Prompt for email image resize" is enabled in Hub and under Display and Actions for every e-mail account. I have 10.3.1.841 on the Classic.

I understand what you are trying to say, however I'm not sure you understand what others have been trying to tell you.
Yes, the iPhone comes with a camera, and it comes with a standard camera application. This is a resident Apple application. You downloaded a new camera "application", not a new camera. This is a 3rd party application that uses the installed camera to operate. When trying to use Facebook, another 3rd party application, and you want to take a picture, it uses the Apple camera interface, because it cannot interact with another 3rd party application. In other words, as many have said, two third party applications cannot run together, or interact together, i.e. Facebook and your camera application.
Does that make sense now? While you can use the downloaded application to take pictures versus the Apple camera application, you cannot change the API for another application to use another 3rd party application for a task. I hopw this explanation works for you.

Officejet Pro 8500 and Adobe Photoshop CS4 64 bits Image Size Problem

I have a Windows Vista Ultimate 64 bits desktop computer. After installing the Officejet Pro 8500 multifunctional drivers all was working OK. Images were being printed nice and with the correct size using Windows print option. After installing Adobe CS4 suite, all images printed from windows or Photoshop have incorrect size (photoshop prints it smaller and windows prints it larger).
I've installed all photoshop patches and re-install Officejet 8500 drivers, but the problem persists.
I've also tried to make a clean installation of the whole computer from the beginning
Does anyone know how to solve this problem? What would be the windows/HP files that were changed by Photoshop?
Thank you.

I'm on the phone with HP tech support about this problem. He said he's gonna charge me to fix the problem and than he put me on hold. I'm waiting to find out how much money I've saved. You put some dollars in my pocket. Thanks!!!!!!

Help: IMAQdx scale image size

HI all,
i'm new in LebVIEW and have a question.
Im using the functions of IMAQdx for a camera (XCD-U100 UXGA black&white).
Is it possible to take images with smaller size? I want to increase the frame-rate.
I can scale the image, after it was taken in max-size (1600 x 1200). But i want the camera to take in custom size, no in max-size.
I hope someone can help me

Hi NEOS,
i is possible to change the resolution in NI Measurement&Automation Explorer.
Go to Devices->IMAQdx Devices here you will find your Camera.
On the bottom of the MAX Window you will find Acquisition Attributes. Here you can change the Resolution of the cam.
Did this help?
Regards
Daniel

Adobe Bridge not showing some images

After a crash of my PC (Windows XP Home), I had to re-install Photoshop CS2. Now, however, when I'm trying to review images in Bridge (in filmstrip view) only some of the thumbnails appear as photos; the remainder appear only as icons. There appears to be no consistency; some are PSD files, some are TIF files. The rotating "clock hands" on the lower left (when images are loading) do not even appear in those cases.
Any idea how to get this back? It's really tough reviewing images when I can't even see them!
Thank you in advance for your help. --Dennis

DMammana wrote:
Guess I wrote too soon... I just purged the cache and that seemed to take care of the problem. Thank you!!
Good! Good! I was wondering what I missed! Glad you're up and running
Gene

Image size limits in Apeture?

Is there a limit to image size in Aperture? There's no mention of any in the Aperture manual that I can see.
I've created a number of panaoramas (upto 27382 x 2000) in Photoshop CS3 but they get corrupted after importing into Aperture. I just get a blacked out preview or a red box containing the message "unsupported image format" despite being PSD files. They won't import into iPhoto either.
Screenshot here:
http://i179.photobucket.com/albums/w314/Marsdy/Aperture.jpg
The files appear perfectly in Adobe Bridge.
TIA.

No image size limit is known.
By the look of things, you have a 54Mb file size. I have a significant number of 250+Mb scans in Aperture and it handles them ..... with an occasional "unsupported image" if I go back and forth selecting different images a number of times. It even allows me to compare 2 x images ..... over 500Mb of image data. I also have numerous 90-120Mb PSD's as well.
However, when I get the "unsupported image" which I know is untrue as they are all TIFF's, I cannot get Aperture to re-render correctly without quitting and relaunching. It suggests Aperture when processing drops a thread and decides an image is unsupported and marks for the session as such.
It could be that you are running in a slower environment or from a slower hdd, which seemed to make my symptoms more frequent.

Adobe recently downgraded the "Image Size" function in Photoshop. How do I get back to the old utility in which I could directly input the image dimensions in pixels?

How do I undo the damage Adobe did to the Photoshop Image Size function?

No, it's not downgraded.
You can still enter the dimensions in pixels with the current dialog. Just check [ ] Resample and change the units to Pixels before entering the number. Voila.
The difference in the layout just takes a little getting used to, after which it becomes very natural to use. To me it seems more logical now than one in the old versions of Photoshop, and of course the new Preserve Details (enlargement) resampling setting is WELL worth having.
-Noel

PSE 8 compatibility with Adobe Bridge CS 5 Camera Raw

I have Photoshop Elements 8 installed with Camera Raw 5.5 on a Windows 7 64-bit platform. I recently purchased Photoshop CS 5 which came with Camera Raw 6.2. I think both products work well independently, with the exception noted at the end of this posting. Where I'm encountering an issue is when I use Adobe Bridge to access an image file for processing which invokes Camera Raw 6.2. -- the changes made to the file show up in Adobe Bridge, but are not observable when the same file is viewed in the Photoshop Elements Organizer. When I look at the file properties I can see that Camera Raw 6.2 updated the file and the updated date does appear in the file properties accessible through PS Elements Organizer. However, the items listed in the Camera Raw metadata are different in the two products (PS vs PSE). Since the sidecar .xmp files are a form of XML, I'm wondering if Camera Raw 6.2 is writing data in a structure that is not supported by Camera Raw 5.5? I've tried to update PSE Camera Raw to version 6.2 following the instruction that appear on line, but it does not seem to install. Durring installation there are no error messages, but after the "installation" PSE Camera Raw still shows version 5.5. I noticed this first when editing a large number of "legacy" .jpg files, but I also have concern when editing Nikon .nef files.
It's a bit hard to tell, but when editing .nef files in Camera Raw 6.2 the changes may migrate to PSE once I tell PSE to update the thumbnail view. But what I observed was a very distinct differece in file's visual appeared when viewed in Adobe Bride CS5 vs PSE 8 Organizer. The PSE 8 images had greater color saturation. This leaves me wondering what's going on.

On my Windows 7 64 bit system the original version of Camera Raw.8bi was found in:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements8\File Formats\ and had a size of 11,781 Kb shown in Windows Explorer. The file properties listed the size as (12,063,088 bytes). The digital signature was signed Thursday, September 03, 2009 3:34:37 PM. To the best of my knowledge this is the version that shipped on the PSE 8 disk which I installed in December 2009.
There is another copy of Camera Raw.8bi found in:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats\ and had a size of 11,856 Kb shown in Windows Explorer. The file properties list the size as (12,140,496 bytes). The digital signature was signed Friday, August 20, 2010 3:30:03 AM. This date post dates the installation of Photoshop CS 5 on my system so it must have happened through some (automatic?) update.
The Camera Raw.8bi file that I've down loaded from Adobe for ACR 6.2 is the same size and has the same signing date as the one identified immediately above in the CS5\File Formats\ sub folder.
When I copy the down loaded file into the Elements8\File Formats\ sub folder PSE still indicates that ACR is version 5.5
I also have a copy of ACR in C:\Program Files\Common Files\Adobe\Plug-Ins\CS5\File Formats\ with a length of 14,526 KB shown in Windows Explorer. The file properties list the size as (14,874,576 bytes) and the signing date as Friday, August 20, 2010 10:39:07 AM. I presume this to be the copy of ACR used by Adobe Bridge and Photoshop which I installed as a 64-bit application. Since the signing date (but not the time) is the same as the date for the file in CS5\File Formats\ I'm guessing that it is also the result of an automatic update to version 6.2.
Something that's not making sense to me is that the down load was approximately 50 MB and I'm messing around manually moving a 12 MB file into a specific sub folder.

Adobe bridge preview magnification ratios

Hi,
As you know, Adobe Bridge to view the image in full screen space (space) d-pad key is pressed. Then, the image with the mouse scroll ball is 100% - 200% - 400% and 800% as the be grown.This growth rate of 50% is not 100% to start with, for example, or would like to create my own values. How do I change this magnification? Many thanks in advance for your help .. Regards,

Thank you very much for your answer.
I'm sorry, I think I told confused.
As you said, the zoom rate of 100%, 200%, 400% and 800% as I know.
However, these rates are forcing me. I want to grow from 50%.
I understand that there is such an option Bridge: (
Is not it possible to develop?
Thanks again,
Sincerely,

Photoshop cropping to correct image size for SP

Ok, this is my first attempt for support here. I've looked quite a bit at other questions that might be similar but can't seem to find my answer.
I'm trying to prepare about 150 pictures in photoshop for a gift DVD presentation. Unfortunately most of the shots are portrait and of course the screens are landscape. I'm wondering if there's a way I can crop these pictures before bringing them over to SP? In the photoshop cropping option I don't get pixels but rather inches. I've learned on the forums that I should try and have my pictures set at 720 X 534 at 72. However in the "image size" option of photoshop when I change the height pixels it automatically changes my previously set width pixels which I has set at 720. AND, what it an even greater concern is that the image size option just makes my pictures smaller but does no cropping. I'd sure like to decide where all these portrait pictures get cropped myself rather than having SP I guess automatically cut them to size to fit the screen.
Appreciate any assistance. I'm using CS3 and SP4

You will need to scale them and then drop them into a proper template (there should be DV menu templates with CS3, have not got my copy yet, but CS2 had them - should be there when you select File->New)
Take a look at the action and title safe lines also in the template, you are going to want all the photos to be inside the small area.
In order to see what you want to see from the pictures you will need to adjust each one.

Adobe Bridge - Export - Manual Scale - Image Size Option

Similar Messages

Maybe you are looking for