Adobe Bridge suddenly not recognizing my camera after upgrade to Cloud

I went from Adobe Photoshop CS6 to Cloud (MAC) Now when I go to Adobe Bridge and  click on Get Photos From Camera it says there is no camera detected. I have use my Nikon D80 and D90 and uploaded RAW photos this way for ever. Now I can't load any photos? Help Please!

This does not seem to be a Photoshop issue but a Bridge issue so please post on the Bridge Forum.

Similar Messages

  • My Macbook is not finding my NIkon D70s.  I do not see it in the finder and my Adobe Bridge is not recognizing that I have a camera hooked up.

    In the past I have downloaded pictures from my Nikon D70s.  This time it is not showing up in the finder and Adobe Bridge does not see it as a device.  I have the camera hooked up and I have it turned on like I would normally do when dwonloading pictures.  I think the last time I had it connected to the computer I may have turned it off before ejecting it properly.  Wondering if that has anything to do with my problem and if so how can I fix it now? 

    Launch Image capture and see if it shows up there.

  • Adobe Bridge (CS2) not working. Even after new installation

    Hello,
    The Problem was, that Adobe Bridge (CS2 on Windows XP) suddenly stopped the work. After several days of trying to get this program to run again, i deinstalled and installed Photoshop with all it´s programms.
    But Bridge still is not working anymore. I can visit some folders once or twice, but after 2 tries, it stopps and give no reaction.
    What is wrong with Photoshop ?
    regards

    You need to reset Bridge preferences by holding
    Ctrl+Alt+Shift while starting the program from the icon. You should get a dialog offering three choices select all of them.
    This does not happen with a re-install of the program.
    If you don't get the dialog box, keep trying till you do.

  • Iphone not recognized by itunes after upgrading to IOS6

    After upgrading ti IOS6 my Iphoe opende and says "configure" and then tells me to connect to Itunes. Problem is that when I start Itunes and connect the Iphone to my computer via USBport is is not recognised by Itunes and not found as a unit. What do I do? The phone will not open and doesn´t funcion.... Anyone knows how ta handle this?

    Hi there Karin01,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    -Griff W. 

  • Iphone not recognized in itunes after upgrade to snow leopard

    after upgrading to snow leopard, iPhone not recognized in iTunes & does not show up.
    Account OK in iTunes.
    Any idea how to resume normal sync ?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • IPod is not recognized in ITunes after upgrade to 7.3.1

    Please help. I upgraded ITunes to the 7.3.1 version and now my IPod is not recognized in my ITunes. The USB port is working since my IPod recharged when I plugged it into the computer. I uninstalled & then reinstalled ITunes, but, my IPod is still not recognized by ITunes or my computer. I cannot find it listed in "my computer" files.
    Any suggestions as to what happened? Thanks.
    J.
    Dell   Windows XP  

    Your post solved the same problem for me. Thank you so much! And thanks to JaketheSnake for starting this thread. iTunes used to start up automatically whenever I connected my iPod Touch, but a couple of months ago it quit doing that. I didn't think much of it as I just clicked on iTunes in the dock and opened it and went on my merry way. I just figured something in the last iTunes update changed it's behavior. But lately I noticed that my iPod Touch would be in the source list while it was syncing and then it would sometimes just disappear. I was too lazy to start a thread, I guess, because I just thought someone would tell me to "restore" my iPT and I had gotten used to my little "work arounds". But now it's fixed, thanks to both of you.
    Judie

  • Why is Acrobat DC not recognizing my scanner after upgrade from Acrobat CC?

    Two days ago I upgraded from Acrobat CC to Acrobat DC on my iMac (OS X 10.10.3). This seems to have rendered my Canon MP980 scanner inoperable. I get a message that the scanner driver(s) are not found. I did not delete any Canon drivers, only performed an Adobe suggested upgrade.
    I see several others have experienced the same. One place I found a suggested workaround, but for me not an acceptable solution, is found in this KB article:
    https://helpx.adobe.com/acrobat/kb/acrobat-dc-does-not-support-twain-drivers-on-mac.html
    I tried to use Mac App store Updates but it is not finding any for the scanner, as suggested in the above article.
    The Cannon is on a local network (Ethernet). My Macbook Pro (OS X 10.10.3) is still running Acrobat CC without any problem using the scanner.
    A real solution would be appreciated.
    Regards,
    toreddie

    Hi Anubha,
    Thanks for your help.
    In Finder ...... > Twain Data Sources I found two files, "Canon MP980 series Network.ds" (1.9Mb) and "Canon MP980 series.ds" (2Mb). Next to Kind for both it says "Application". I don´t see the word "Package" or "PowerPC" or "Universal". However, under Where, it says "Macintosh HD>Library>Image Capture>TWAIN Data Source. This is also the same information I find on my Macbook Pro (OS X 10.10.3), but still running Acrobat CC (not upgraded yet, thankfully). I can still scan using my MBP.
    I was able to scan using Image Capture.
    I did not have time to go through the procedure of logging in as root user.
    Frankly, this seems way to complicated. There has to be an easier fix to the problem.
    I also checked Canon´s website for updated driver files, but there are none for Yosemite.
    Regards,
    Tor-Eddie

  • Iphoto 2 doesn't recognize my Digimax camera after upgrade

    since upgrading from osx 10.3 to 10.3.9 my Samsung Digimax U-CA3 camera is no longer recognized by iPhoto 2.0.1. Is it possible to download a driver? No driver was needed before as the computer supported the camera-up to 10.3! Does this mean the camera is now obsolete?
    Thanks in advance.

    Brie- 'USB' and 'Computer' are highlighted in camera Set-up- no other settings. A UK magazine, Macuser, advised me to buy a Card Reader which will have a universal storage format. Apparently camera manufacturers 'stray' from this universality and introduce 'quirks' which throw protocol and may be responsible for my Mac not recognizing the camera after the upgrade.
    Meanwhile I'm still intrigued 1] by the Mac's System Profiler recognising the camera and 2] your insights into Permissions after Upgrade and Disc Utility! Also it seems likely that having 'related' to the camera previously the Mac would still have the capacity to do so.[?]
    Still, the Card Reader is a cheaper solution [£9] than a new camera and I'm an artist and need to record my work. Any further thoughts welcome, and thanks so much for your help. This communication made the problem very interesting and enjoyable!

  • Adobe bridge raw not working with windows vista in photoshop cc, why?

    adobe bridge raw not working in photoshop cc, is there a fix?

    Your sure your using photoshop cc on windows vista?
    I was under the impression that photoshop cc would not even install on windows vista.
    What version of camera raw do you have?
    In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
    (click on the words Camera Raw to see the version)
    Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
    What camera are the camera raw files from?
    Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

  • Onlocation is not recognizing my camera

    I have a Panasonic HPX300 and im shooting on dvcprohd connected via firewire, and when i turn OL on it reads "no video input found. connect a camera to your computer, or check your cameras connection and power"  I have my camera on PC Mode.  any help would be appreciated.
    thanks
    Sean

    It's not that FMLE is not recognizing your camera.... FMLE is not recognizing your capture device (the iGrabber). 
    Just because a capture device can capture video as a file onto your computer doesn't mean that the device is made to deliver throughput video as a "live camera" source.  There is a big difference between recording to a file, and passing video through as a source.
    An inexpensive caputre device that FMLE can see is the Dazzle Video Creator Platinum HD.  If you have a FireWire connection on your computer I would strongly suggest using the Canopus ADVC110 capture device (works like a champ -- no issues or errors).
    If you change your capture device out to one that allows other software (like FMLE, XSplit, Wirecast, etc.) to see the video as a "source" then you'll be in luck.  iGrabber simply does not have that capability.  This isn't the fault of Adobe, it simply wasn't designed by iGrabber to be used in this manner.

  • FMLE is not recognizing my camera.

    I'm using a Sony HDR-CX160 with an iGrabber connected via USB.  FMLE is not recognizing the camera.  Any suggestions?

    It's not that FMLE is not recognizing your camera.... FMLE is not recognizing your capture device (the iGrabber). 
    Just because a capture device can capture video as a file onto your computer doesn't mean that the device is made to deliver throughput video as a "live camera" source.  There is a big difference between recording to a file, and passing video through as a source.
    An inexpensive caputre device that FMLE can see is the Dazzle Video Creator Platinum HD.  If you have a FireWire connection on your computer I would strongly suggest using the Canopus ADVC110 capture device (works like a champ -- no issues or errors).
    If you change your capture device out to one that allows other software (like FMLE, XSplit, Wirecast, etc.) to see the video as a "source" then you'll be in luck.  iGrabber simply does not have that capability.  This isn't the fault of Adobe, it simply wasn't designed by iGrabber to be used in this manner.

  • Adobe Bridge will not show items in subfolder even when this option is checked.

    Adobe Bridge will not show items in subfolder even when this option is checked. It works on one computer but not the other-both working on the same system/ version of adobe cc.
    How can I fix this bug?

    Check to see what is different between setups.  You may want to reset prefences in the balky computer.

  • Adobe products are not recognized in my Internet Explorer 10 on my Win 7 64B professional

    Adobe products are not recognized with my Internet Explorer. I cannot open PDF documents on websites and I cannot play MSN games since Flash Player is not found. I have tried manage add-ons and enable status without success. Can anyone supply detailed information on how to fix this problem?
    C-adobe

    Are you running IE10 in 64-bit mode?  The Adobe Reader plugin is 32-bit, and can only run on a 32-bit browser.
    Regarding Flash Player, do you have ActiveX Filtering enabled?  Disable it.

  • Ipod shuffle 2nd gen suddenly not recognized by itunes, any ideas?

    My 2nd gen shuffle is suddenly not recognized by itunes, all troubleshooting done per apple support, ie make sure cords plugged firmly, try all usb ports, try different cord etc... any ideas?

    Hello,
    I had a similar problem. I posted my problem in this link:
    http://discussions.apple.com/thread.jspa?threadID=836301&tstart=0
    Would you read that and see if it sounds like something you're experiencing? If so maybe we can both scream for help on here at the same time, and get some answers!

  • No luck importing from SonyHandycam DCR-DVD650?  I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera.  Any ideas what the issue could be?

    I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book.  I am using the USB connection.  The macbook is not recognizing the camera.  The macbook is running OSX 10.6.8.  Any ideas on what the problem could be?

    http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
    According to this website the camera should be compatible with iMovie '11
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    So here's some steps to take to get the Mac to recognize your camera.
    1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
    2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
    3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
    4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
    No guarantees, but some things to try

Maybe you are looking for

  • How do you separate jpeg sidecar file from cr2?

    I now see that the preference to treat jpegs as separate files is an import preference.  So now I have some jpeg_+cr2 files that show up in grid view.  Other than going into explorer and deleting it, is there a way to separate and remove the jpeg in

  • Problem with JTextArea

    Hi all, I am having a class which extends JTextArea. I press backspace and I check for some condition in KeyReleased event. If the condition is true I am setting the JTextArea with the old text(retainText). What happens here is that first the backspa

  • IPhone 6 not updating to iOs 8.3 either on phone or itunes

    I have tried several times to update my iPhone 6, both via the phone and iTunes, but it never completes. On the phone I get to the agree to terms press it and then nothing happens it remains in the terms and conditions! On iTunes it commences to down

  • Transfer Report output to email body

    Hi, I have some problems in transferring my report output into the email body. As i know, there is a function to transfer the report output to the email as attachment. But for my current requirement, i would like to transfer the report output the the

  • Booting from RAM

    I was trying to follow this guide to configure my system to load my root partition to RAM on startup. I get stuck at the: cd /usr/share/initramfs-tools/scripts/ part. Does anyone know how I can finish this guide? or perhaps know about a guide that su